Obliavimo ir profiliavimo automatai pirkti naudotą (495)

Sąlyga: naudotas, Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, obliavimo plotis: 280 mm, darbinio aukščio: 80 mm, bendras svoris: 2 500 kg, Parduodama skersinio pjovimo optimizavimo staklė WEINIG Opticut 150. Staklė nuo naujos naudojama mūsų įmonėje. Geros būklės, reguliariai prižiūrėta, nuolat eksploatuojama. Galima apžiūrėti ir išbandyti vietoje. Planuojamas išmontavimas 2025 m. pabaigoje. Komplekte yra nauja padavimo juosta – dar neįmontuota. Iisdpfxjxvyt Tj Abkjk

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1994,

Sąlyga: labai geros būklės (naudotas), CATALOG NUMBER 7665 Technical Data: - Shaft width: 510 mm - Planing shaft (2 knives mounted), 4-knife - Maximum thickness of processed element on thicknesser: 200 mm - Maximum thickness of processed element on lateral heads (3-sided): 100 mm – From the top: - Pawls - Serrated feed-in shaft - Planing shaft - Pressure roller - Smooth feed-out shaft – From below: - Adjustable rollers in the lower table: 2 pcs - Guide rail - Lateral pressure from the side – From the rear: - 2 lateral spindles + pressure rollers - Spindle height: 100 mm - Max spindle spacing: 510 mm - Spindle diameter: 30 mm - Spindle adjustment: right/left Iedpfx Aowqdlljbkeik - Motor: 2×1.5 kW - 2 feed speeds - Main motor: 7.5 kW - Extraction port: 2×100 mm - Overall dimensions (L×W×H): 1800×1250×1000 mm - Weight: 1070 kg ADVANTAGES – Made in Poland – 4-knife shaft – Very good condition – Used planer/thicknesser Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Gamybos metai: 2008, Sąlyga: naudotas,

Sąlyga: geras (naudotas), WEINIG PROFIMAT 22N Four-Sided Planer Iisdpfx Absh Akbaekek – Technical documentation (DTR) – Made in Germany – Adjustable spindles TECHNICAL SPECIFICATIONS: Planing width: 220 mm Planing height: 120 mm Spindle diameter: 40 mm 1) Bottom head: 4 kW 2) Right head 3) Left head: 5.5 kW 4) Top head: 4 kW 5) Universal 360° head: 4 kW Feed motor: 2.2 kW Feed speed: 5 – 20 m/min Four steel top feed rollers Two rubber top feed rollers One feed roller in the table Feed via cardan shafts Electric height adjustment Infeed table length: 1970 mm Central lubrication Pneumatic hold-downs Machine dimensions (L/W/H): 380 / 200 / 170 cm Weight: approx. 2000 kg

Sąlyga: labai geros būklės (naudotas), CATALOG NUMBER 7663 TECHNICAL DATA - Maximum planing width: 510 mm - Maximum planing height: 200 mm – Top: - Anti-kickback fingers - Feed roller, serrated - Two rows of hold-downs - Infeed feed roller, serrated - Hold-down - 510 mm planing shaft with 4 knives, 7.5 kW motor - Hold-downs - Outfeed feed roller, smooth - Two outfeed hold-downs - Smooth feed roller – Bottom: - Hold-down - Adjustable infeed table with slip roller - 510 mm planing shaft with 4 knives, 5.5 kW motor - Two slip rollers, smooth - Side pressure roller – Rear: - Side spindles 1) Right vertical 140 mm, 4 kW 2) Left vertical 140 mm, 4 kW - Spindle diameter: 40 mm - 4-knife heads installed, height 120 mm Iodswqchfspfx Abkeik - Spindles adjustable up/down, right/left - Stepless feed speed adjustment - Electric table lifting - Suction connector diameters: 3×150 mm, 1×110 mm - Dimensions (L×W×H): 2300×1700×1700 mm - Weight: 2,200 kg ADVANTAGES – Ideal for flooring processing – Electric table lifting – Made in the Czech Republic – Used planer in very good condition Net price: PLN 36,900 Net price: EUR 8,780 (calculated at exchange rate 4.2 PLN/EUR) (In case of significant exchange rate fluctuations, the price may change)

Sąlyga: labai geros būklės (naudotas), CATALOG NUMBER 7244 TECHNICAL DATA - Maximum workpiece width: 800 mm - Maximum workpiece thickness: 160 mm From the top: - Smooth feed roller - Anti-kickback fingers - Feed roller, toothed, split (segmented, sequential) for simultaneous planing of several elements - 2 pressure rows - Feed roller, toothed, split (segmented, sequential) - Pressure bar - Planing shaft 810 mm, 4 knives, 18.5 kW - Pressure bar Iiedorfb Nvspfx Abkok - Smooth feed roller, metal From the bottom: - Adjustable infeed table with feed roller - Feed roller - Planing shaft 810 mm, 4 knives, approx. 10 kW - 2 smooth, metal, adjustable feed rollers - Metal feed roller, smooth - Electric table height adjustment - Stepless feed speed adjustment: 7–40 m/min - Motor approx. 2.2 kW - Extraction port diameter: 200 mm, 180 mm - Dimensions (L/W/H): 1950 x 2100 x 1700 mm - Weight: approx. 2500 kg – Made in Czech Republic – Condition: very good, used planer Net price: 34,900 PLN Net price: 8,200 EUR (depending on exchange rate: 4.2 PLN/EUR) (Prices subject to change with significant rate fluctuations)

Sąlyga: labai geros būklės (naudotas), KATALOGO NR. 6674 TECHNINIAI DUOMENYS - maks. obliavimo plotis: 150 mm - maks. obliavimo aukštis: 130 mm 7 velenai: 1) apatinis horizontalus 150 mm 3 kW 2) dešinys vertikalus 130 mm 3 kW 3) kairys vertikalus 130 mm 4 kW 4) viršutinis horizontalus 150 mm 4 kW 5) apatinis horizontalus 150 mm 3 kW Iedsiba Evspfx Abkjik 6) dešinys vertikalus 130 mm 4 kW - visų velenų skersmuo: 35 mm - visi velenai reguliuojami aukštyn/žemyn ir dešinėn/kairėn - viršuje 4 dantytieji traukimo voleliai - viršuje 4 gumos išvedimo traukimo voleliai - viršuje 2 spaudikliai - elektrinis obliavimo storio reguliavimas: 0,25 kW - paduodamo stalo ilgis: 1970 mm - centrinis stalo tepimas - sklandus padavimo greičio reguliavimas - padavimo variklis: 1,5 kW - ištraukimo angų diametrai: 6x120 mm - matmenys (ilgis/plotis/aukštis): 4000x1300x1600 mm - svoris apie 3000 kg – vokiečių gamyba – su 6 galvutėmis – naudotas obliavimo staklės, labai gera būklė Grynasis kaina: 36 900 PLN Grynasis kaina: 8 790 EUR Grynoji kaina pagal kursą 4,2 PLN/EUR (esant dideliems kurso svyravimams kaina gali keistis)

Sąlyga: labai geros būklės (naudotas), Catalogue number: 7288 TECHNICAL DATA - Max. working width: 230 mm - Max. working height: 130 mm 6 spindles: 1) Bottom horizontal: 230 mm, 7.5 kW 2) Right vertical: 130 mm 3) Left vertical: 130 mm; (Spindles 2 and 3) 15 kW Spindle 3 electrically adjustable left/right 4) Top horizontal: 230 mm, 11 kW 4th spindle electrically adjustable up/down 5) Bottom horizontal: 230 mm, 7.5 kW 6) Universal: 230 mm, adjustable up to 360°, 11 kW - All spindles adjustable vertically and horizontally - All spindles equipped with brake - Spindle diameter: 40 mm - Top: 4 infeed rollers, driven, steel, toothed, including 2 double rollers - Top: 3 outfeed rollers, driven, smooth, rubber, including 2 double rollers - Bottom: 2 outfeed rollers, rubber, driven - Bottom: 3 lateral pressure rollers - Stepless feed speed adjustment - Rollers pneumatically loaded - Feed motor: 3 kW - Electric thickness adjustment - Body lifting motor: 0.37 kW - Infeed table length: 2480 mm Iodpferwmp Usx Abksik - Enclosed in sound cabin - Centralized table lubrication - Extraction outlet diameters: 130 mm, 140 mm, 4x125 mm - Dimensions (LxWxH): 4960 x 1760 x 1700 mm - Weight approx. 3500 kg ADVANTAGES - Italian-made - 6-head configuration - Original paint, never repainted - All spindles equipped with brake - Last spindle is universal - Used planer/moulder, in very good condition Original photos Net price: 54,900 PLN Net price: 13,070 EUR (based on 4.2 EUR rate) (Prices may change due to exchange rate fluctuations)

Sąlyga: labai geros būklės (naudotas), CATALOG NUMBER 6950 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 4 spindles: 1) Bottom horizontal: 220 mm, 5.5 kW 2) Right vertical: 130 mm 3) Left vertical: 130 mm (spindles 2 & 3), 5.5 kW 4) Top horizontal: 220 mm, 5.5 kW - 4 spindles electrically adjustable up/down - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - 4 top infeed driven, toothed rollers, including 1 double roller - 1 top double outfeed driven, rubber roller - Bottom outfeed driven, rubber roller - Feed via Cardan shafts - Infinitely variable feed speed: 6–22 m/min - Feed motor: 2.2 kW - Lifting motor: 0.55 kW - Electric planing thickness adjustment - Infeed table length: 1970 mm - Central lubrication - Extraction port diameters: 3 x 120 mm, 140 mm - Enclosed within a cabinet - Dimensions (L x W x H): 3350 x 1400 x 1400 mm - Weight: 1700 kg Isdpfx Ajlikzfsbksik - Manufactured in Germany - Unpainted - Used planer, very good condition Net price: 38,900 PLN Net price: 9,260 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Sąlyga: labai geros būklės (naudotas), Catalogue number 6393 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - Number of spindles: 4: 1) Bottom horizontal spindle: 200 mm, 5.5 kW 2) Right vertical spindle: 150 mm, 4 kW 3) Left vertical spindle: 150 mm, 4 kW 4) Top horizontal spindle: 200 mm, 5.5 kW - All heads adjustable up/down, left/right - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 feeding, toothed rollers (including 2 double rollers) - 1 outfeed, rubber pulling roller From below: - Toothed, feeding, swivelling roller integrated in the lower table - 3 side pressure units - Outfeed, pulling, smooth metal roller - All rollers pneumatically loaded - Infeed table length: 2,130 mm - Table height adjustable up/down - Central lubrication - Electric thickness adjustment - Lifting motor: 1.1 kW - Stepless feed speed adjustment via inverter - Feed motor: 3 kW - Feed via Cardan shafts - Enclosed in cabin - Extraction port diameters: 4x130 mm - Overall dimensions (LxWxH): 3,550 x 1,750 x 1,800 mm - Weight: approx. 3,000 kg ADVANTAGES – 4-head configuration – Ideal for wet and dry timber – Technical documentation (DTR manual) – Used machine, very good condition Net price: PLN 65,900 Ijdehh Sflepfx Abkjik Net price: EUR 15,690 Net price calculated at an exchange rate of 4.2 PLN/EUR (price subject to change with significant exchange rate fluctuations)

Sąlyga: labai geros būklės (naudotas), Catalogue No.: 7715 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Bottom horizontal 220 mm, 5.5 kW 2) Right vertical 130 mm, 7.5 kW 3) Left vertical 130 mm, 7.5 kW 4) Right vertical 130 mm, 5.5 kW 5) Top horizontal 220 mm, 11 kW – 5th spindle electrically adjustable up/down 6) Bottom horizontal 220 mm, 5.5 kW 7) Bottom horizontal 220 mm, 5.5 kW – 7th spindle with support and Jointer system (cutterhead sharpening) 8) Universal 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable vertically and laterally (up/down, right/left) - Spindle diameter: 40 mm – Top feed: - 6 double-toothed infeed rollers + 1 single - 3 double smooth rubber outfeed rollers + 3 single - Meter counter – Bottom feed: - Swivelling toothed infeed roller integrated in the lower table - 3 metal smooth feed rollers - Feed on Cardan shafts - Pneumatically pressed feed rollers - Infinitely variable feed speed adjustment + 2 feed rates from 10–60 m/min Iiedpow Ipcvsfx Abkok - Feed motor: 10 kW - Electric thickness adjustment - Motorised lifting of machine body: 0.75 kW - Central table lubrication - Extraction port diameters: 5 x 140 mm, 3 x 120 mm - Machine dimensions (L x W x H): 4680 x 1780 x 1850 mm - Control cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm - Weight approx.: 5000 kg ADVANTAGES – 8-head machine – Universal spindle – Perfect for both wet and dry wood – Made in Germany by WEINIG – Unpainted – Very low operating hours – Used planer in immaculate condition Net price: 165,900 PLN Net price: 39,500 EUR depending on the exchange rate of 4.2 EUR (Prices may vary with significant fluctuations)

Sąlyga: labai geros būklės (naudotas), KATALOGO NR. 6946 TECHNINIAI DUOMENYS - maksimalus apdirbamo elemento plotis: 210 mm - maksimalus apdirbamo elemento storis: 120 mm Ijdpfolhrk Sjx Abkeik - velenų kiekis: 2 vnt - velenų skersmuo: 50 mm Iš viršaus: - 3 įvesties volai, traukiantys, guminiai, lygūs, iš kurių 2 dvigubi - 2 išvesties volai, traukiantys, guminiai, iš kurių 1 dvigubas - galvutės ant laikiklių - galvučių aukščio reguliavimas aukštyn/žemyn - elektrinis viršutinės galvutės aukščio reguliavimas - elektrinis obliavimo storio nustatymas - velenai su stabdžiu - pagrindinis variklis 2×5,5 kW - tolydus padavimo greičio reguliavimas - padavimo variklis 3 kW - padavimas per Kardano velenus - ištraukimo jungties skersmuo 2×160 mm - matmenys ilgis/plotis/aukštis: 2350×1780×1950 mm - svoris: 1882 kg – vokiška gamyba – jointeriai – peilių galvučių galandimui – komplekte 2 Hydro galvutės – nedažyta – labai gera būklė, naudotas oblius Kaina be PVM: 33 900 PLN Kaina be PVM: 8 070 EUR Kaina be PVM perskaičiuota pagal kursą 4,2 PLN/EUR (Esant didesniems valiutų svyravimams, kaina gali keistis)

Sąlyga: labai geros būklės (naudotas), Catalogue number 6765 TECHNICAL DATA - Maximum working width: 230 mm - Maximum working height: 160 mm Number of spindles: 4: 1) Bottom horizontal 230 mm 5.5 kW 2) Right vertical 160 mm 5.5 kW 3) Left vertical 160 mm – electric adjustment left/right from the control panel, 5.5 kW 4) Top horizontal 230 mm – electric adjustment up/down from the control panel, 7.5 kW - All spindles adjustable vertically and horizontally - Spindle diameter: 40 mm From above: - Feed rollers: 6 geared steel rollers (including 2 double rollers) - Outfeed rollers: 2 rubber pull rollers From below: - Infeed pull roller, geared steel, swiveling in lower table - Outfeed steel pull roller, smooth - Pneumatically adjustable rollers - Infeed table length (with pneumatic feeder): 3,390 mm - Option to operate without pneumatic feeder, worktable height adjustable - Centralized lubrication - Electric adjustment of planing thickness - Infinitely variable feed speed - Feed via Cardan shaft - Feed motor: 4 kW - Enclosed in a cabinet - Extraction port diameters: 4 x 120 mm - Dimensions (L/W/H): 7,000 x 1,950 x 1,700 mm - Weight: approx. 3,000 kg - For wet and dry wood Iijdpfx Abjin Elpjkjk - Pneumatic feeder on the infeed table - Used planer, very good condition Net price: PLN 89,900 Net price: EUR 21,400 Net price calculated at the rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Sąlyga: labai geros būklės (naudotas), CATALOGUE NO. 6651 Iijdpfx Aboh Up Ipekok TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 120 mm – 4 spindles: 1) Lower horizontal spindle 220 mm, 4 kW 2) Right vertical spindle 120 mm, 4 kW 3) Left vertical spindle 120 mm, 4 kW 4) Upper horizontal spindle 220 mm, 5.5 kW - All spindles are adjustable (up/down, right/left) - Spindle diameter: 40 mm - 4 top-feed drive rollers, toothed (including 2 double rollers) - 1 top-feed outfeed roller, smooth, rubber-coated - Lower-feed outfeed roller, rubber-coated, driven - Pneumatically pressed feed rollers - Feed via cardan shaft rollers - Feed motor: 1.1 kW - Lifting motor: 0.37 kW - Electrically adjustable planing thickness - Infeed table length: 1980 mm - Lateral pressure system - Stepless feed speed adjustment: 8–16 m/min - Centralized lubrication - Extraction port diameter: 5 x 140 mm - Enclosed in a cabin - Dimensions (L x W x H): 3400 x 1500 x 1700 mm - Weight approx. 1670 kg Net price: 39,900 PLN Net price: 9,500 EUR Net price calculated at 4.2 PLN/EUR exchange rate (price may vary in case of significant currency fluctuations)

Sąlyga: labai geros būklės (naudotas), CATALOG NO. 7164 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm 4 spindles: 1) lower horizontal: 220 mm, approx. 5.5 kW 2) right vertical: 130 mm Iedpfx Absp Dupgskoik 3) left vertical: 130 mm; (spindles 2 and 3) 7.5 kW 4) upper horizontal: 220 mm, 7.5 kW - 4th spindle adjustable electrically up/down - all spindles adjustable up/down, right/left - spindle diameter: 40 mm - top: 4 driven feed rollers, toothed - top: 1 driven outfeed roller, rubber-coated - bottom: 1 driven outfeed roller, rubber-coated - feed with Cardan shafts - stepless feed speed adjustment - feed motor: 1.5 kW - lifting motor: 0.75 kW - electric planing thickness adjustment - infeed table length: 1960 mm - central lubrication system - extraction nozzle diameter: 3x120 mm, 140 mm - enclosed in cabinet - dimensions (L/W/H): 3430x1500x1430 mm - weight approx. 1,500 kg – for 4 cutterheads – Made in Germany – not repainted – used planer, in very good condition Net price: 35,900 PLN Net price: 8,550 EUR, depending on 4.2 EUR exchange rate (Prices may change with higher fluctuations)

Sąlyga: labai geros būklės (naudotas), CATALOG NUMBER 7220 TECHNICAL SPECIFICATIONS - Min – max working width of the workpiece: 20 – 230 mm - Min – max working height of the workpiece: 8 – 160 mm 7 spindles: 1) bottom horizontal 230 mm 5.5 kW 2) right vertical 160 mm 5.5 kW 3) left vertical 160 mm 5.5 kW 4) right vertical 160 mm 5.5 kW 5) left vertical 160 mm 5.5 kW 6) top horizontal 230 mm 7.5 kW 7) bottom horizontal 230 mm 7.5 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 10 feed-in traction rollers, toothed, metal, including 2 double rollers - 3 side pressure units From below: - Side pressure at feed-in - Feed-in roller, toothed, traction, oscillating in the lower table Iisdsq Nm Htspfx Abksk - 2 side pressure units - Ribbed worktable - Traction roller, metal, ribbed - Traction roller, metal, smooth - Rollers pneumatically adjustable - Infeed table length: 2,410 mm - Central table lubrication - Electric planer thickness adjustment - Body lifting motor: 1.1 kW - Stepless feed speed adjustment via frequency inverter, 6–30 m/min - Feed motor: 5.5 kW - Feed via Cardan shafts - Enclosed in a soundproof cabin - Extraction port diameter: 7 x 160 mm - Dimensions (L/W/H): 5,100 x 2,190 x 1,800 mm - Weight: 5,400 kg ADVANTAGES - 7 heads - Ideal for wet and dry wood - DTR technical documentation included - Used planer, very good condition Net price: 138,900 PLN Net price: 33,070 EUR Net price calculated at exchange rate 4.2 PLN/EUR (Price may change with significant exchange rate fluctuations)

Sąlyga: labai geros būklės (naudotas), CATALOG NO. 7219 TECHNICAL DATA - Max. working width: 200 mm - Max. working height: 150 mm Number of spindles: 4 1) Lower horizontal: 200 mm, 5.5 kW 2) Right vertical: 150 mm, 4 kW 3) Left vertical: 150 mm, 4 kW 4) Upper horizontal: 200 mm, 5.5 kW - All heads adjustable vertically and horizontally - Spindle diameter: 40 mm - Spindle speed: 6000 rpm From above: - Feed-in roller shafts with gears: 6 pcs, including 2 double - 1 double outfeed roller shaft, rubber-coated From below: - Feed-in roller, geared, driven, steerable, in the lower table - 3 side pressure rollers - Outfeed roller, driven, metal, smooth - All rollers pneumatically pressed - Infeed table length: 2130 mm - Table height adjustable - Central lubrication - Electric thickness adjustment - Lifting motor: 1.1 kW - Stepless feed speed adjustment - Feed motor: 3 kW - Feed via Cardan shafts - Fully enclosed in cabin - Extraction port diameter: 4x130 mm - Dimensions L/W/H: 3650 x 1750 x 1800 mm - Approximate weight: 3000 kg ADVANTAGES – 4-head configuration – Ideal for both wet and dry wood Ijdpfxsq Nm A Tj Abkeik – DTR (technical documentation) included – Used machine, very good condition Net price: 68,900 PLN Net price: 16,400 EUR Net price calculated at 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Sąlyga: labai geros būklės (naudotas), CATALOG NUMBER: 6904 TECHNICAL DATA: - Max. working width: 230 mm - Max. working height: 130 mm 6 spindles: 1) Lower horizontal: 230 mm, 5.5 kW Iiedpskvm T Hefx Abkek 2) Right vertical: 130 mm 3) Left vertical: 130 mm (spindles 2 and 3), 7.5 kW 4) Upper horizontal: 230 mm, 5.5 kW 5) Lower horizontal: 230 mm, 5.5 kW 6) Universal: 230 mm, angle adjustable 360°, 5.5 kW - All spindles adjustable up/down, left/right - Spindles 1, 2, 3, 4, and 5 equipped with electric brakes - Spindle diameter: 40 mm - 5 feed-in top feed rollers, toothed - 4 output top feed rollers, rubber, smooth (2 are double rollers) - 1 lower feed roller, rubber - Feed drive via Cardan shafts - Pneumatic feed roller pressure - Infinitely variable feed speed - Feed motor: 4 kW - Working pressure: 6–10 bar - Electric thickness adjustment - Lifting motor for machine body: approx. 0.55 kW - Central table lubrication - Infeed table length: 1970 mm - Extraction port diameters: 2x140 mm, 4x135 mm - Dimensions (LxWxH): 4430 x 1830 x 2000 mm - Weight: approx. 3500 kg ADVANTAGES: – German manufacture, WEINIG brand – 6-head moulder – DTR technical documentation – Universal spindle – Used planer/moulder, very good condition Net price: 97,900 PLN Net price: 23,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Sąlyga: labai geros būklės (naudotas), Catalogue number 7294 TECHNICAL DATA - Maximum workpiece width: 230 mm - Minimum workpiece width: 15 mm - Maximum workpiece height: 160 mm - Minimum workpiece height: 10 mm 7 spindles: 1) Lower horizontal 230 mm, 7.5 kW 2) Right vertical 160 mm, 5.5 kW 3) Left vertical 160 mm, 5.5 kW 4) Right vertical 160 mm, 5.5 kW 5) Upper horizontal 230 mm, 7.5 kW 6) Upper horizontal 230 mm, 7.5 kW 7) Lower horizontal 230 mm, 5.5 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - 3rd, 5th, and 6th spindles electrically adjustable from the control panel to required size (ATS) - Motors: 2 x 0.37 kW - Spindle diameter: 40 mm - All spindles equipped with brakes Iisdpfjryv Nysx Abkok From above: - 8 feed-in rollers, toothed, metal, including 2 double rollers - 3 feed-out rollers, rubber, double From below: - Feed-in roller, toothed, driven, swiveling - 3 feed-out rollers, metal, smooth - Rollers with pneumatic pressure - Infeed table length: 2480 mm - Central table lubrication - Electric thickness adjustment - Body elevation motor: 0.56 kW - Stepless feed speed adjustment via frequency inverter: 6–24 m/min - Feed motor: 3.7 kW - Feed via Cardan shaft rollers - Extraction port diameter: 7 x 125 mm - Dimensions (LxWxH): 5520 x 1930 x 1900 mm - Weight: approx. 4,000 kg ADVANTAGES – 7-head configuration – Ideal for wet and dry wood – With ATS system – Original DTR documentation + CE – Unpainted – Used planer, in excellent condition Original photos Net price: 169,900 PLN Net price: 40,450 EUR, depending on exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Sąlyga: labai geros būklės (naudotas), Catalogue number: 7289 TECHNICAL DATA - Maximum workpiece width: 230 mm Iodperwmr Nsfx Abkeik - Maximum workpiece height: 170 mm 6 spindles: 1) Bottom horizontal: 230 mm, 5.5 kW 2) Right vertical: 170 mm 3) Left vertical: 170 mm (spindle 2 & 3) 11 kW 4) Top horizontal: 230 mm, 11 kW 5) Top horizontal: 230 mm, 7.5 kW 6) Bottom horizontal: 230 mm, 11 kW - All spindles adjustable up/down, right/left - Spindles 4 and 5 electrically adjustable up/down - Spindle speed: 8,000 rpm - Spindle diameter: 40 mm - All spindles fitted with electric brake - 6 top infeed, feed, toothed rollers, including 1 double - Top outfeed, feed, rubber, double roller - Bottom outfeed, feed, rubber, double roller - Side pressure - Feed on Cardan shafts - Pneumatically pressed rollers - Stepless feed speed adjustment: 6–24 m/min - Feed motor: 4 kW - Electric thickness adjustment - Body lifting motor: 0.55 kW - Central table lubrication - Extraction outlets diameter: 6 x 140 mm - Dimensions (L x W x H): 4900 x 2400 x 2000 mm - Weight: approx. 4000 kg ADVANTAGES – German-made, WEINIG brand – With 6 cutterheads – Unpainted – Used thicknesser/planer, very good condition Original photos Net price: 142,900 PLN Net price: 34,000 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on rate fluctuations)

Sąlyga: labai geros būklės (naudotas), Catalog number: 6368 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 130 mm 7 spindles: 1) Lower horizontal 230 mm, 5.5 kW 2) Right vertical 130 mm, 5.5 kW 3) Left vertical 130 mm, 5.5 kW 4) Upper horizontal 230 mm, 7.5 kW 5) Upper horizontal 230 mm, 11 kW 6) Lower horizontal 230 mm, 18.5 kW 7) Universal 230 mm, adjustable 360 degrees, 5.5 kW - All spindles adjustable up/down and left/right - All spindles equipped with electric brake - Spindle diameter: 40 mm - Spindles 4 and 5 adjustable electrically up/down - Top: 8 driven metal feed rollers, swiveling, including 2 double rollers - Top: 4 driven rubber outfeed rollers - Top: 2 pressure units - Bottom: pawls - Bottom side: 3 pressure units - Bottom: 2 smooth metal driven rollers - Bottom: 2 double driven rubber rollers - Feed rollers pneumatically pressed - Feed on Cardan shafts - Stepless feed speed adjustment: 5–36 m/min - Feed motor: 4 kW - Electric thickness adjustment: 0.75 kW - Infeed table length: 1980 mm - Fully enclosed machine compartment - Central table lubrication - Extraction port diameters: 5x120 mm, 2x150 mm - Dimensions (LxWxH): 5500x1840x1900 mm - Weight: approx. 5000 kg ADVANTAGES – Italian manufacture – Equipped with 7 heads – Suitable for wet and dry wood – Last spindle universal – Not repainted – Used planer, in very good condition Iodpfx Aehfl T Iebkeik Net price: 146,900 PLN Net price: 34,970 EUR (based on 4.2 EUR exchange rate) (Prices may vary depending on exchange rate fluctuations)

Sąlyga: labai geros būklės (naudotas), CATALOG NUMBER 6575 TECHNICAL DETAILS - Maximum workpiece width: 230 mm - Maximum workpiece height: 170 mm - 7 spindles: 1) lower horizontal 230 mm, 11 kW 2) right vertical 170 mm 3) left vertical 170 mm (spindle 2 and 3), 11 kW 4) right horizontal 170 mm, 5.5 kW 5) top horizontal 230 mm, 11 kW 6) lower horizontal 230 mm, 7.5 kW 7) universal 230 mm, adjustable 360°, 7.5 kW - all spindles adjustable vertically/horizontally - spindle 3 and 5 adjustable electrically - ATS (Automatic Tooling System) - spindle diameter: 40 mm - electric brakes - 4 toothed top infeed rollers, including 1 double roller - 1 top infeed rubber double roller - 1 top outfeed rubber double roller - 2 lower smooth metal feed rollers - 1 lower double rubber feed roller - feed via Cardan shafts - pneumatically pressed feed rollers - stepless feed speed adjustment: 6–24 m/min - feed motor: 5.5 kW - electric thickness adjustment - body lifting motor: 0.55 kW - central table lubrication - extraction port diameter: 7 x 140 mm - dimensions (LxWxH): 5800 x 2050 x 1850 mm - weight approx.: 4500 kg Iiodpfxslrvhco Abkek ADVANTAGES – German-manufactured, WEINIG brand – with 7 heads – universal spindle – with ATS – suitable for wet and dry wood – used planer, in very good condition Net price: 169,900 PLN Net price: 40,450 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (in case of substantial exchange rate fluctuations, the price may change)

Sąlyga: labai geros būklės (naudotas), Catalog number 6747 TECHNICAL DATA - Maximum planing width: 170 mm - Maximum planing height: 130 mm 7 spindles: 1) Bottom horizontal 170 mm 4 kW 2) Right vertical 130 mm 5.5 kW 3) Left vertical 130 mm 5.5 kW 4) Right vertical 130 mm 5.5 kW 5) Top horizontal 170 mm 4 kW - 5th spindle electrically adjustable up/down 6) Bottom horizontal 170 mm 5.5 kW 7) Universal 170 mm, adjustable to 180°, 7.5 kW - Spindle diameter: 35 mm (all spindles) - All spindles adjustable vertically and horizontally - Top feed: 6 toothed feed rollers, including 2 double rollers - Top outfeed: 4 rubber feed rollers - Pneumatically pressed rollers - 1 side pressure roller - 2 guiding rails on the table - Electric thickness adjustment 0.37 kW - Infeed table length: 2480 mm - Infinitely variable feed speed - Feed motor: 2.2 kW - Extraction ports: 1x135 mm, 5x120 mm - Dimensions (LxWxH): 5550x1900x1660 mm - Weight: approx. 3500 kg ADVANTAGES – Made in Germany – 7-head machine – Universal spindle – Used planer, very good condition Net price: PLN 27,900 Net price: EUR 6,640 Net price calculated at exchange rate of 4.2 PLN/EUR Iiodpeik E Igofx Abksk (In case of major exchange rate fluctuations, the price may be adjusted)

Sąlyga: labai geros būklės (naudotas), Four-side planer WEINIG HYDROMAT 22 AL - Max. working width: 220 mm - Max. working height: 130 mm - 8 spindles: 1) Bottom horizontal, 220 mm, 5.5 kW 2) Right vertical, 130 mm, 7.5 kW 3) Left vertical, 130 mm, 7.5 kW 4) Right vertical, 130 mm, 5.5 kW 5) Top horizontal, 220 mm, 11 kW – 5th spindle with electric height adjustment (up/down) 6) Bottom horizontal, 220 mm, 5.5 kW 7) Bottom horizontal, 220 mm, 5.5 kW – 7th spindle with support and Jointer system (cutterhead sharpening) Iedpfxsw Ipico Abkjik 8) Universal, 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Top feed system: – 6 double-toothed infeed rollers + 1 single roller – 3 double smooth rubber outfeed rollers + 3 single rollers – Meter counter - Bottom feed system: – Toothed, driven, swiveling infeed roller in lower table – 3 smooth metal feed rollers - Feed via Cardan shafts - Pneumatic pressure rollers - Stepless feed speed adjustment + 2 speeds: 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Table lift motor: 0.75 kW - Central table lubrication - Extraction port diameters: 5 x 140 mm, 3 x 120 mm - Machine dimensions (LxWxH): 4680 x 1780 x 1850 mm - Electrical cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm - Weight: approx. 5000 kg Feeder with centering device: - Roller width: 450 mm - 1 toothed infeed roller - 22 smooth feed rollers - Adjustable top pressure - Feeder length: 9020 mm - Stepless speed adjustment: 10–60 m/min - Motor: 0.75 kW - Dimensions (LxWxH): 9020 x 790 x 1150 mm Net price: PLN 180,000 Net price: EUR 42,860 (as per exchange rate 4.2 EUR; prices may vary depending on currency fluctuations)