Ekscentrinės presai, vieno stovo, 55–99 t pirkti naudotą (98)

Būklė: naudotas, Gamybos metai: 1998, Pressure: 80 t Outreach: 335 mm Stroke: 8 – 100 mm Strokes per minute: 60/90 Table area: 900 x 670 mm Through-hole in table: 280 x 200 mm Maximum installation height: 450 mm Ram adjustment: 80 mm Ram area: 700 x 450 mm Maximum tool dimensions: 700 x 450 mm Maximum tool weight: 140 kg Total power requirement: 11.07 kW Machine weight approx.: 6.5 t Space requirements approx., W x L x H: 1.72 x 2.0 x 2.82 m Equipment - Gear train - Hydraulic clutch - Large ram - Pneumatic ram weight compensation with air reservoir mounted on the right side of the frame - Oil lubrication, manufacturer: Vogel - Semi-automatic stroke adjustment - Hydraulic ball screw adjustment with manual clamping - Mechanical overload protection (shear plate) - Ram adjustment with Siko counter - T-slot table plate - Monitored ram holding device - Control cabinet mounted on console on right side of the machine - Foot switch - 1 set of vibration-damping elements Tjdjuild Aspfx Alwsb - Operating manual / EC declaration of conformity The machine is technically overhauled in our facility and receives a current press inspection as well as - Oil change - Filter replacement - Replacement of hoses.

Gamybos metai: 1980, būklė: naudotas, Pressure: 80 t Outreach: – mm Stroke: 50 mm Table surface: 875 x 695 mm Tsdodlcy Hjpfx Alwjb Ram surface: 350 x 355 mm Ram adjustment: 71 mm Strokes per minute: 30 – 90 Gap width: 450 mm Machine weight approx. 6.2 t Space requirement approx. 2.0 x 2.1 x 3.2 m Installation height (stroke down, ram adjustment up): 480 mm Further information: - The machine is currently being partially overhauled - The machine has been newly equipped with the following components: * Separate free-standing control cabinet with touchscreen, including wiring * New paintwork of individual components in disassembled state After the partial overhaul, the machine is safe for manual loading operation at open tools. Before delivery, a current UVV safety inspection and brake time measurement will be carried out.

Būklė: naudotas, Gamybos metai: 1996, Pressure: 80 t Throat depth: 320 mm Tjdstycdkjpfx Alwsb Stroke: 6 - 118 mm Strokes per minute: 30 - 80 spm Ram adjustment: 70 mm Table area: 830 x 610 mm Ram area: 650 x 400 mm Frame gap (towards rear): 630 mm Total power requirement: kW Machine weight approx. 8.1 t Space requirement approx. W 1.2 x D 1.9 x H 3.3 m Equipment/features: - with gear drive - fixed table - automatic stroke adjustment - automatic ram adjustment - hydraulic overload protection - ejector - centralized grease lubrication - cover plate for drop hole - stepless speed control via frequency inverter - The machine will be technically overhauled and inspected in our facility and will receive a new control cabinet with safety control system and touchscreen - current accident prevention inspection (UVV) with brake time measurement

Būklė: naudotas, Gamybos metai: 1982, Spaudimo jėga: 63 t Išsikišimas: 315 mm Eiga: 8–120 mm Stalo plotas: 630 x 800 mm Montavimo aukštis: 560 mm Stūklio reguliavimas: 70 mm Ėjimų skaičius: 56/90 ėjimų/min. Stūklio plotas: 400 x 500 mm Bendrasis energijos poreikis: 6 kW Mašinos svoris: apie 5,5 t Reikalingas plotas: apie 1,5 x 2,2 x 2,75 m Toliau nurodyti darbai turi būti atlikti prie mašinos / Dalinis remontas: - Mašina bus visiškai išardyta ir patikrinta - Mašina bus nudažyta iš naujo - naujas presavimo saugos vožtuvas - naujas atskiras valdymo spintos blokas su jutikliniu ekranu ir ABB saugos valdikliu Tjdpfx Ast Ev Tnelwob - nauji velenų guoliai - prieš išsiuntimą atliekamas dabartinis UVV (Vokietijos nelaimingų atsitikimų prevencijos asociacijos) patikrinimas ir stabdymo laiko matavimas.

Būklė: naudotas, Gamybos metai: 1990, Spaudimo jėga 75 t Išsikišimas 290 mm Eiga 12–100 mm Stūklio reguliavimas 80 mm Eigos dažnis 140 eiga/min. Stalo paviršiaus plotas 830 x 560 mm Stūklio paviršiaus plotas 630 x 300 mm Bendrasios galios poreikis kW Mašinos svoris apie 6,1 t Reikalingas plotas apie m Įranga: - hidraulinis įrankio tvirtinimas, 4 stalai - stūklio svorio kompensavimas, gamintojas „Festo“ Tjdpfx Aet Ev T Ielwjb - centrinė tepimo sistema - motorinis stūklio reguliavimas - hidraulinė sankaba - apsauginė plokštė - hidraulinis spaustuvų fiksatorius - kojinis jungiklis Valdymo spinta bus atnaujinta.

Būklė: naudotas, Pressure: 55 t Throat depth: 250 mm Stroke: 10–90 mm Table size: 640 x 495 mm Strokes per minute: 120 spm Ram adjustment: 55 mm Ram area: 290 x 210 mm Ram bore: 40 H7 mm Pass-through opening in table: 220 x 190 mm Todjcp Apyspfx Alwob T-slots: 22 mm Clamping plate: 620 x 485 x 65 mm Total power requirement: 4.5 kW Machine weight: approx. 3.4 t Space requirements: approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination - Vogel central lubrication system - Balluff cam switchgear - Height-adjustable table - Mechanical ram overload protection (shear plate) - Control cabinet with touchscreen - Foot switch

Būklė: naudotas, Spaudimas 80 t Išsikišimas 320 mm Eiga 8 - 112 mm Stalo paviršius 830 x 600 mm Eigos dažnis 30 - 85 eigų/min Stumoklio paviršius 650 x 400 mm Stumoklio reguliavimas 71 mm Priveržimo plokštė 990 x 550 mm Stalo aukštis virš grindų 810 mm Stalo aukštis nuo žemės 800 mm Stovo praėjimas (priekyje) 680 mm Stovo praėjimas (gale) 520 mm Bendras galios poreikis 7,5 kW Staklių svoris apie 7,7 t Užimamas plotas apie 1,5 x 2,2 x 3,15 m Įranga: - su ratukų padėklu - fiksuotas stalas Staklės buvo/yra dalinai renovuotos: - Pilnas išmontavimas ir patikrinimas - Stalo ir stūmoklio paviršiai perfrezuoti - Naujos sandarikliai ir hidraulinės žarnos - Naujas pagrindinis variklis - Abu pagrindiniai guolių įvorės, trečiojo guolio įvorė ir švaistiklio įvorė nauji - Velenas apdirbtas ir įvorintas - Dažymas - Nauja valdymo spinta su PLC ir lietimui jautriu ekranu, laidų instaliacija Tsdpfx Alstqm Dmswjb - Atnaujintas UVV patikrinimas su stabdymo laiko matavimu

Būklė: naudotas, Pressure: 63 t Throat depth: 315 mm Stroke: 16 - 125 mm Max. distance between table and ram: 417 mm Ram adjustment: 70 mm Stroke rate: 80 strokes/min Table dimensions: 800 x 630 mm Ram surface: 500 x 400 mm Total power requirement: 6 kW Machine weight approx. 5 t Space requirement approx. 1.5 x 2.2 x 2.75 m Todpfx Ajtqm Dqolweb The following works will be carried out on the machine / partial overhaul: - Machine will be disassembled and checked - Machine will be newly painted - New Vogel lubrication unit - New cam controller - New control cabinet with touch panel and ABB safety control - Before delivery, a current accident prevention regulation (UVV) inspection and brake time measurement will be performed

Būklė: naudotas, Press capacity: 63 t Outreach: – mm Stroke: 16 – 125 mm Table size: 800 x 600 mm Working capacity: 250 Shearing area: 1600 mm² Tedpfech Umcjx Alwsb Table adjustability: 220 mm Total power requirement: 6 kW Machine weight approx.: 5 t Distance table/ram: 562 mm The machine will be dismantled and partially overhauled – new paintwork – new control cabinet – conversion for safe operation – repair/maintenance

Būklė: naudotas, Nominali galia: 23 kW Nominali srovė: 43 A Tjdoucgnispfx Alwob Įtampa: 400 V Parduodamas elektros valdymo spinta, kuri iš pradžių buvo skirta vieno stovo ekscentrinei presai, gamintojas Erfurt, modelis PEE III/160.

Gamybos metai: 1990, būklė: naudotas, Pressure: 75 t Throat depth: 300 mm Stroke: 8 - 110 mm Table size: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Passage opening in table: 250 x 150 mm Ram bore: 40 mm Strokes per minute: 60 + 90 spm Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram at bottom stroke, ram down: 19 mm Distance table/ram at top stroke, ram up: 380 mm Equipment: - with hydraulic clutch-brake combination, new hydraulics and oil cooler - with gear drive in oil bath - fixed table prepared for attaching tool change consoles - 2 roller rails in table - mechanical overload in ram (shear plate) The following work will be carried out on the machine / partial refurbishment: - Machine will be completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine will be repainted - New Balluff cam switchgear - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication - New control cabinet with touch panel and ABB safety control - Current safety inspection (German UVV) including brake time measurement Tedpfxed Nl E Uo Alwob

Gamybos metai: 1969, būklė: naudotas, Pressure: 63 t Todpfoh Dfctox Alwsb Throat: – mm Stroke: 16 – 125 mm Table surface: 800 x 630 mm Ram adjustment: 70 mm Strokes in continuous operation: 80 strokes/min Max. distance table – ram: 417 mm Ram surface: 500 x 400 mm Clamping plate thickness: 70 mm Total power requirement: 6 kW Machine weight approx.: 5.5 t Space requirement approx.: — m - Tiltable - Ram equipped with break plate safety device - Table clamping plate - Ram adjustment via ratchet - Balluff cam switchgear Machine is not safe for hand-loading operation!

Gamybos metai: 1979, būklė: naudotas, Pressure: 75 t Throat depth: 260 mm Stroke: 16–80 mm Table surface: 800 x 520 mm Distance table/ram: 350 mm Stroke rate – stepless: 50–250 strokes/min Ram surface: 400 x 300 mm Ram adjustment: 70 mm Total power requirement: 7.5 kW Space requirements approx.: 2.7 x 1.7 x 2.6 m Machine weight approx.: 4 t Through-hole in table: 260 x 180 mm - Pneumatic Ortlinghaus air clutch with auxiliary brake - Infinitely variable speed control via Stöhrer drive - Shear plate Tjdofn Ap Depfx Alwjb - Two-hand control - Additional clamping plate - Air reservoir tank for clutch - Oil circulation lubrication

Gamybos metai: 1990, būklė: naudotas, Pressure: 80 t Todpjfn Aqnsfx Alweb Throat depth: 250 mm Stroke: 5/95 mm Table surface: 805 x 510 mm Distance table/ram at bottom stroke: 400 mm Ram bore diameter: 45 mm Ram adjustment: 100 mm Ram surface: 360 x 300 mm Strokes per minute: 55 spm Total power requirement: 5.5 kW Machine weight approx.: 4 t Space requirement approx.: 0.83 x 1.7 x 2.6 m - Ram weight balance The machine will be partially overhauled at our facility next year (disassembly, inspection, new paint, new wiring, new control cabinet).

Būklė: naudotas, Vieno stovo ekscentrinė štampavimo presas WEINGARTEN tipas EV 63 Mašinos Nr. 738 / 61 Pagaminimo metai: 1962 Presavimo jėga: 63 t Iškyša: 260 mm Stalo matmenys: 630 x 530 mm Stalo anga: Ø 210 mm Presavimo galvutės matmenys: 315 x 260 mm Presavimo eiga reguliuojama: 8-100 mm Presavimo galvutės reguliavimas: 63 mm Tvirtinimo kaiščio skylė: Ø 40 mm, su fiksavimo elementu Montavimo aukštis maks.: 450 mm Smūgių dažnis: 115 smūgių/min. Suslėgto oro poreikis: min. 4,5 bar Variklio galia: 4 kW Maitinimas: 380 V, 50 Hz Tjdpfxsk S Htxe Alweb Stalo aukštis nuo grindų: apie 750–900 mm - Elektrinis eigos paleidimas per pakojų jungiklį arba dviejų rankų valdymą - Apkrovos apsauga per lūžtančią plokštę - Sankabos-stabdžio kombinacija su WEINGARTEN frikcine sriegine sankaba ir TDP viršutinės padėties sauga - Priekinis alkūninio veleno atraminis guolis - Presavimo stalas reguliuojamas aukščiu su 2 sriegio velenais - Rankinis centrinis tepimas - Elektros skydas šalia - UVV rankiniam įdėjimui Užimamas plotas (I x P x A): 1750 x 1600 x 2430 mm Svoris: 4,5 t Gera būklė

Būklė: naudotas, Single-column eccentric press MÜLLER GEFREES Type 60 SV DK (identical to ExP60) Very little-used eccentric press in original condition Machine no. 5250686 Year of manufacture 1986 Like-new condition Todpoi A A Tbefx Alwjb Pressing force: 60 tons Throat depth: 280 mm Table area: 740 x 560 mm Ram area: 385 x 200 mm Pass-through hole in table: 300 x 200 mm Table area (intermediate plate): 740 x 560 mm Pass-through hole in intermediate plate: Ø 103 mm Plate thickness (intermediate plate): 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Installation height max.: 275 mm (with intermediate plate) Installation height max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Strokes per minute: 100 spm Motor output: 3 kW Drive power: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic actuation - Spring-loaded single-jaw brake controlled via cam disk - Stroke release via pneumatic foot switch - Overload protection with breaking plate in ram - Table height adjustment via 2 threaded spindles - Manual central lubrication (BEKA Lubrication Technology) - Operating manual and pneumatic diagram available Required space (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons Very good, like-new condition

Būklė: naudotas, Single-column eccentric press EBU type 75 SKU Machine no. P 4598462, year of manufacture 1962 Pressing force: 75 tons Throat depth: 300 mm Table size: 800 x 620 mm Drop hole: 325 x 225 mm Ram surface: 470 x 180 mm Clamping pin bore: Ø 40 mm Table height above floor: 845 mm Stroke adjustment: 16 - 140 mm Ram adjustment: 80 mm Maximum installation height: approx. 420 mm Strokes per minute: 60 + 105 spm Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection via rupture plate in the ram - Tool monitoring UNIDOR, type APS MINI - Mechanically driven gripper feed with strip straightener OSTERKAMP, type ZPN 200/350 - Strip width: 200 mm, feed length max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds via 2 V-belt stages on gear train Todpedzqltjfx Alwjb - Two-hand operation - Simple swing-away working area guard - Table height adjustment in lowest position = spindle adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Required floor space (L x W x H): 2600 x 2300 x 2450 mm Weight: approx. 5.5 tons Good condition

Būklė: naudotas, Gamybos metai: 1998, Beutler P96-C630 - ekscentrinis presas - mobilus valdymo pultas - be pakopų reguliuojama pavara - sankabos ir stabdžio derinys - perkrovos saugiklis stūmoklyje - šviesos užuolaida - gulbės kaklo lempa - pagaminimo metai: 1998 Techniniai duomenys - Spaudimas: 630 kN - Eiga: 12 - 120 mm - Eigos dažnis: 30 - 130 /min - Maks. stabdymo laikas: 96 ms Todpfxeyna N Te Alweb - Iškyša: 300 mm - Atstumas nuo stalo iki stūmoklio: 495 mm - Tarpas tarp korpuso sienelių: 270 mm - Stūmoklio paviršiaus matmenys: 450 x 360 mm - Stūmoklio reguliavimas: 120 mm - Stalo paviršiaus matmenys: 800 x 560 mm - Stalo anga: Ø 100 mm - Darbo aukštis: 880 mm - Min. saugos atstumas: 192 mm - Variklio galia: 5,5 kW - Darbinė įtampa: 3x 400 V / 50 Hz - Įrenginio matmenys (plotis x aukštis x gylis): 1800 x 2600 x 1600 mm - Valdymo spintos matmenys (plotis x aukštis x gylis): 800 x 1700 x 450 mm - Svoris: apie 5500 kg

Būklė: naudotas, Gamybos metai: 1989, Bendra presavimo jėga: 80 t Iškyša: 280 mm Stūmoklio eiga: 8 - 140 mm Stūmoklio reguliavimas: 100 mm Įrengimo aukštis (eiga apačioje, reguliavimas viršuje): 520 mm Stalo tvirtinimo plotas apie: 850 x 670 mm Stūmoklio tvirtinimo plotas apie: 550 x 400 mm Stalo skylė: 250 x 180 mm Eigos per minutę: 20 - 100 min⁻¹ Galingumo poreikis: 7,5 kW Matmenys I x P x A: 2210 x 1510 x 2750 mm Todpfx Ajy Hqz Sslwsb Alyvos kiekis apie: 50 l Įrankio svoris ant stūmoklio maks.: 300 kg Mašinos svoris apie: 8,3 t

Gamybos metai: 1972, būklė: naudotas, mašinos/transporto priemonės numeris: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram surface: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 Drive motor: 380 V, 3 kW Required space: 1700 x 1200 x 2500 mm Weight: 3.3 t Todpfeb Tdqusx Alwsb

Būklė: naudotas, Gamybos metai: 1970, Adjustable stroke: yes Machine weight: approx. 9.5 t Serial number: 10457/2 Pressing force: 160,000 kg Ram slide strokes: 41 strokes/min +++++ Please note that the machine is currently dismantled and prepared for loading. For this reason, an onsite demonstration under power or production of a video is not possible. Furthermore, our listing already includes the most informative high-quality photos available. Unfortunately, it is not possible to provide additional images. Tsdevvx Exopfx Alwob +++++

Būklė: naudotas, Gamybos metai: 1971, mašinos/transporto priemonės numeris: 7130, Total pressing force: 60 t Throat depth: 275 mm Ram stroke: 5 - 100 mm Tjdpfxjuqcxns Alwjb Installation height (stroke down, adjustment up): 375 mm Table clamping area approx.: 740 x 470 mm Strokes per minute: 14 - 100 min⁻¹ Power requirement: 10 kW Dimensions (LxWxH): 2,300 x 1,500 x 3,000 mm Machine weight approx.: 3.5 t

Gamybos metai: 1987, būklė: naudotas, Presskraft: 63 t Ausladung: 300 mm Hub: 8–140 mm Hubzahl: 70 Hub/min Stößelverstellung: 100 mm Tsdpfx Asp Sycwslwsb Tischfläche: 750 x 620 mm Stößelfläche: 500 x 340 mm Durchfallöffnung im Tisch: Ø 180 mm Tischhöhe: 850 mm Zapfenloch im Stößel: Ø 50 mm Maschinengewicht: ca. 7,5 t Aufstellmaße (BxTxH): ca. 2100 x 1500 x 3300 mm Ausstattung/Optionen: - Hydraulische Kupplungs-Bremskombination - Zentrale Fettschmierung - Hydraulische Überlastsicherung im Stößel - Automatische Hubverstellung - Motorische Stößelverstellung - Zweihandbedienung - Fußbedienung - Gegenlager - Rädervorgelege - Luftkühler - Hydraulische Zapfenklemmung - Hydraulische Pleuelklemmung - Hydraulische Werkzeugspanner

Gamybos metai: 1967, būklė: naudotas, Pressure: 63 t Throat depth: 280 mm Stroke: 8–100 mm Strokes per minute: 56/84 Ram adjustment: 63 mm Table area: 620 x 500 mm Ram area: 310 x 260 mm Table pass-through opening: Ø 250 mm Table height: 850 mm Ram bore: Ø 40 mm Machine weight approx. 4 t Space required approx. 1200 x 1900 x 2800 mm Manual central lubrication Mechanical overload protection in the ram Tedpfx Aolp U Emelwob Front counter-bearing Friction clutch Foot pedal operation Only approved for use with safe tools

Būklė: naujas, Gamybos metai: 1984, Presskraft 80 t Ausladung 280 mm Hub 10–100 mm Hubzahl 52/80 Hübe/min Stößelverstellung 60 mm Tischgröße 850 x 550 mm Stößelfläche 420 x 220 mm Durchgangsöffnung im Tisch 300 x 200 mm Tischhöhe 780 mm Zapfenloch im Stößel Ø 45 mm Maschinengewicht ca. 4,5 t Platzbedarf ca. 2000 x 2000 x 2700 mm Hydraulische Kupplungs-Bremskombination Zentrale Handschmierung (Fettschmierung) Mechanische Stößel-Überlastsicherung Manuelle Hubverstellung Manuelle Stößelverstellung Zweihandbedienung Fußschalter Englische Übersetzung: Pressing force 80 t Throat depth 280 mm Stroke 10–100 mm Stroke rate 52/80 strokes/min Slide adjustment 60 mm Table size 850 x 550 mm Ram area 420 x 220 mm Pass-through opening in table 300 x 200 mm Tedpfxswa Umls Alwob Table height 780 mm Ram bore Ø 45 mm Machine weight approx. 4.5 t Space requirement approx. 2000 x 2000 x 2700 mm Hydraulic clutch-brake combination Central manual grease lubrication Mechanical ram overload protection Manual stroke adjustment Manual ram adjustment Two-hand control Foot switch