Vedinės/pavaros veleno tekinimo staklės, tekinimo skersmuo virš lovos 300–399 mm pirkti naudotą (210)

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor B, Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C (NEW) Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: - Machine No. 90-1495 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm Hfodpfxsvambce Abmor - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock Morse taper 3 - Feed rates from 0.015 to 0.46 mm/rev - Possible threads: Metric, Imperial, Module and Diametral Pitch - Metric thread pitches from 0.18 to 28 mm - Weight approx. 1100 kg - Spindle brake engageable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: - 3-axis digital readout by K&C, new, with 12 months manufacturer warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving function, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal, - Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments - 160 mm 3-jaw chuck with two sets of jaws, NEW - Multifix quick change toolpost, size A, with 2 new tool holders - Bed stop - Electric chuck guard, NEW - LED machine lamp, NEW - Rear splash guard - Operating manual - Coolant system - Machine feet About the machine: Offered is a Weiler Condor B lead and feed screw lathe, geometrically overhauled and in as-new condition. The guideways have been reground or newly hand-scraped. Supplied with a certified inspection protocol. A very attractive machine with electronic spindle protection. The accessories — collets, chuck, and Multifix — are new. Spindles, nuts, bearings, belts, and wipers have been renewed. You are welcome to inspect this machine under power at our premises and see its condition for yourself.

Sąlyga: geras (naudotas), Used lead and feed screw lathe COLCHESTER MASTER 3250 Centre height: 170 mm Distance between centres: 650 mm Spindle bore: 42 mm Infinitely variable speed from 15 to 3250 rpm Hedpfx Abjuqkf Nomofr 1 x SCHUNK wedge bar power chuck Ø160 mm 1 x MULTIFIX tool post size B with 4 holders Machine lamp, chuck guard electrically secured, machine mounts 1 x revolving live centre 1 x revolving live centre with pressure indicator 1 x drill chuck with morse taper The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 3 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Spindle nose: A2-6" - Spindle drive power: 22 [kW] - Spindle speed: 3400 [rpm] - Max. bar diameter: 76 [mm] - Max. machinable diameter: 298 [mm] SUB SPINDLE - Spindle nose: A2-5" - Spindle speed: 6000 [rpm] - Rapid traverse speed: 10 [mm/min] TURRET HEAD 1 - Number of positions: 12 - Travel range X/Z: 213/572 [mm] - Tool type: BMT65 ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power: 30 [kW] WEIGHT AND DIMENSIONS - Required floor space: 3630/2290 [mm] - Machine height: 2340 [mm] - Machine weight: 4536 [kg] MACHINE HOURS - Power-on hours: 622 [h] - Operating hours: 137 [h] EQUIPMENT - Control: HAAS - Interface: Ethernet / RS232 / USB / PCMCIA - Teach-in programming - Coolant tank - Chip conveyor - Tool probing system - Electrical transformer - Number of fixed tool holders: 9 Hfjdsxlk I Tepfx Abmor - 3-jaw chucks: 2

Sąlyga: naudotas, Gamybos metai: 1985, Weiler Praktikant 140 lathe, year of manufacture 1985, three-jaw chuck, Multifix toolpost. The Z-axis guideway shows slight wear in the front section. The machine is in good, ready-to-use condition. Can be demonstrated under power by arrangement. Hjdpfxov N Awfo Abmjfr

Sąlyga: naudotas, Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: LVT50 GMRJA/04069, STAKLĖS SPECIFIKACIJA Atstumas nuo centro iki centro: 195 mm Hfsdpexldidefx Abmsr Didžiausias darbinio skersmens ruošinys virš staklių lovos: 400 mm Didžiausias darbinio skersmens ruošinys virš skersinio vežimo: 246 mm Didžiausias darbinio skersmens ruošinys tarpuvėje: 585 mm Plotis priešais veido plokštę: 165 mm Atstumas tarp centrų (lovos ilgis): 1250 mm Veleno greičiai (be pakopų): 0–2500 aps./min Veleno tvirtinimas (Camlock): D1-6 Veleno skylė: 54 mm Veleno variklis: 7,5 kW Lovos plotis: 318 mm Skersinio vežimo eiga: 250 mm Viršutinio vežimo eiga: 130 mm Galvutės cilindro eiga: 178 mm Kūginė lizdo dalis galvutėje: Nr. 5 MT Apytikslis svoris: 1800 kg Staklės metrinėje komplektacijoje STAKLĖS KOMPLEKTUOJAMOS SU Newall 2 ašių skaitmenine matavimo sistema 3 žandikaulių griebtuvas Greitai keičiamas įrankių laikiklis Ainjest didelio greičio sriegiavimo priedas Griebtuvo apsauga Apšvietimas Aušinimo sistema Galinė apsauga nuo drožlių

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, veleno skylė: 40 mm, centro aukštis: 160 mm, tekėjimo ilgis: 650 mm, veleno greitis (maks.): 3 000 aps./min, veleno greitis (min.): 20 aps./min, sukimosi greitis (maks.): 3 000 aps./min, sukimosi greitis (min.): 20 aps./min, bendras svoris: 800 kg, veleno tvirtinimas: MK 3, Įranga: sūkių greitis be galo kintamas, Availability: on request Centre height: 160 mm Hedpfx Aevnrzqsbmefr Centre distance: 650 mm Spindle bore: Ø 40 mm Spindle speed: 20–3000 rpm, stepless Tailstock taper: MK3 Quill stroke: 85 mm Longitudinal feed range: 0.020 – 0.630 mm/rev Cross slide feed range: 0.006 – 0.200 mm/rev Possible thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: selectable Voltage: 400 V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Additional features and accessories: 3-axis digital readout, coolant system, chuck guard, 3-jaw chuck and further accessories available on request...

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout by K&C, As New from Training Workshop – Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 / Machine No.: D3F H1 010 >> Center height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, infinitely variable from 35–3000 rpm >> Quill stroke: 120 mm >> Tailstock taper: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Required floor space (approx.): Length 1.6 x Depth 0.9 x Height 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: >> K&C 3-axis digital readout, new, 12 months manufacturer’s warranty with user manual Hjdpfxswvuf Tj Abmefr Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, 200 tool memory, taper calculation, radius/diameter, quick zeroing, counting direction switching, >> 1 pc. NEW 3-jaw chuck 160 mm, 2 sets of jaws >> Multifix B tool post with 2 holders >> Chip guard >> Coolant system About the Machine: For sale is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is, of course, fully functional. The bed ways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new 3-jaw chuck. You are welcome to inspect the machine under power on-site and see the condition for yourself.

Sąlyga: naujas, Praktikant VC plus The new standard in conventional precision lathes. High-quality, energy-efficient, precise, and universally applicable for production, training, and further education. This machine impresses with: future-oriented technology maximum accuracy durability user-friendly ergonomics minimal footprint and a wide range of accessories. The consistent and innovative further development of the proven Praktikant series offers an economical and intelligent solution for your daily applications. Technical data: WORKING AREA Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Distance between centres: 650 mm SPINDLE Spindle nose DIN 55027 / DIN ISO 702-3: Size 5 Hfsdpfxshw N Nte Abmor Spindle bore: 43 mm Front bearing spindle diameter: 70 mm MAIN DRIVE Drive power 60%/100% duty cycle: – / 8 kW Speed range: 25 – 5,000 rpm Number of speeds: infinitely variable FEED RANGE Number: infinitely variable Longitudinal: 0.01 – 6 mm/rev Cross: 0.003 – 2 mm/rev THREADING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 40 mm Quill stroke: 85 mm Morse taper DIN 228: MT 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER screen display WTS 15 VC plus - Large, clear 15" touchscreen, pivoting and swiveling, resolution 1366 x 768 - Change operating masks via swipe gestures - Operating functions accessible via app manager - Control panels can be freely configured, positioned, and scaled - Drawings/sketches can be imported from PDF files via USB interface and individually zoomed - Video-assisted machine maintenance - Context-sensitive help menu (instead of WEILER VC plus screen display) - Coolant unit, 18 litres, incl. coolant pump The machine is located in our showroom at 71334 Waiblingen-Beinstein and is available immediately. For detailed information about equipment and configuration, please contact us.

Sąlyga: labai geros būklės (naudotas), Leadscrew and feed shaft lathe Spindle bore: 76 mm Center height: 220 mm Hfodpfx Abova Ef Tjmer Turning length: 3,00 m Multifix tool post with 5 cassettes Coolant system Operating manual

Sąlyga: naudotas, Gamybos metai: 1990, sukimosi skersmuo virš skersinio stumduko: 210 mm, veleno skylė: 31 mm, tekėjimo skersmuo: 320 mm, centro aukštis: 165 mm, The machine can be tested under power and is fully functional. Includes accessories. Collet equipment is included. Hfodewpkd Sspfx Abmjr

Sąlyga: labai geros būklės (naudotas), WEILER CONDOR tobulas originalios būklės -Mašina iš mokymo įstaigos -Vadovai kaip "NAUJI" -Trijų ašių skaitmeninis indikatorius „Naujas“ -Trijų žandų griebtuvas 200 mm „Naujas“ -Tvirtinimo žiedų įranga, įskaitant rinkinį „NAUJAS“ -Multifix su įdėklais „Naujas“ -Elektrinė griebtuvo apsauga -Keturių žandų griebtuvas -Besisukantis centras + gręžimo griebtuvas -Dokumentacija -Originali danga -Sūkių diametras 330 mm -Sūkių diametras virš atramos 170 mm -Sūkių ilgis 800 mm -Veleno skylė 38 mm -Veleno sūkių dažnis 24-2800 aps./min. -Automatiniai išilginiai / plokštuminiai pastūmos Hfodpfx Aow Iv U Ssbmor -Galvutės kūgis MK3 -Darbo lempa -Skubus / avarinis stabdis Matmenys: Ilgis x plotis x aukštis 1,9x0,9x1,6 m / svoris 850 kg Galimi netikslumai / klaidos dėl duomenų įvedimo

Sąlyga: geras (naudotas), Tovaglieri parallel lathe Used, from an educational environment. Excellent condition. Centre height: 180 mm. Distance between centres: 700 mm. Spindle bore: 45 mm. Included accessories. Hfodskt U E Iopfx Abmsr No. 4 units available, subject to prior sale.

Sąlyga: naujas, Lead and Feed Screw Lathe Bernardo Standard 165 D Technical Specifications Centre Distance: 1000 mm Centre Height: 175 mm Swing Over Bed: 350 mm Swing Over Gap*: 450 mm Swing Over Cross Slide: 190 mm Bed Width: 180 mm Spindle Bore: 40 mm Spindle Mount: DIN 55029, D1-4 Speed Range: (8) 70 - 2000 rpm Longitudinal Feed Range: (40) 0.053 - 1.29 mm/rev Cross Feed Range: (40) 0.013 - 0.31 mm/rev Metric Threads: (32) 0.4 - 7 mm Inch Threads: (36) 4 - 60 TPI Tailstock Quill Travel: 110 mm Tailstock Taper: MT 3 Motor Output (S1 100%): 1.5 kW (400 V) Motor Power Input (S6 40%): 2.2 kW (400 V) Machine Dimensions (W x D x H): 1730 x 700 x 1340 mm Weight approx.: 514 kg * Removable bed section Scope of Delivery • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-160 mm / D4 • Face plate 200 mm / D4, as per DIN 55029 • Fixed steady rest – max. passage diameter 60 mm • Follow rest – max. passage diameter 60 mm • Clamping plate 250 mm • 4-way tool post • Shaft locking device • Tool post safety guard • Slip clutch • Micrometer longitudinal stop Hfodpod Ri Ezofx Abmer • Coolant system • Removable chip tray • Motor with magnetic brake to CE standards • Foot pedal with brake function to CE standards • Splash guard • Thread dial indicator • LED machine lamp • Reducing sleeve • Change gears • 2 centre points • Base frame • Operating tools

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, veleno skylė: 40 mm, centro aukštis: 165 mm, plotis centre: 750 mm, Dear Sir or Madam, We are offering for sale a Weiler Condor B lathe. This model is particularly notable for its very user-friendly operation and an excellent ratio of space requirement to centre height/centre distance. The Condor B falls in size between the Weiler Praktikant and the Weiler Commodor, making it a true all-rounder for any workshop. The machine is being partially overhauled in our workshop, ensuring it is in excellent technical and visual condition. All guides are in good order, the gearboxes run quietly, and the levers switch smoothly. You are welcome to inspect the machine on site and judge its condition for yourself. Availability: on request Centre height: 165 mm Centre distance: 750 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Chuck mounting: Short taper DIN55027 size 5 with bayonet lock Quill stroke: 85 mm Speed range: 22–2800 rpm Thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.18 – 28 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.80 x 1.30 x 0.9 m (L x H x W) Weight: approx. 1100 kg Additional equipment and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stop, lead & feed screw cover (optional), operating manual, and much more available on request. Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines undergo at least a workshop inspection - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul the selected machine - On request, we can repaint the selected machine in your desired colour - On request, you can order further accessories such as tools directly - On request, we can install additional accessories such as safety devices - We are happy to arrange transport and/or installation for you Hfodpfx Aew N Np Sjbmer

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 190 mm, veleno skylė: 32 mm, tekėjimo skersmuo: 320 mm, centro aukštis: 160 mm, tekėjimo ilgis: 650 mm, trijų žandikaulių griebtuvo skersmuo: 160 mm, For sale here is a lathe from Voest Alpine in good condition! See pictures Manufacturer: Voest Alpine Hsdpfxewq Ehbs Abmefr Model: DA-160 Centre height: approx. 160 mm Distance between centres: approx. 650 mm Swing over bed: approx. 320 mm Swing over cross slide: approx. 190 mm Spindle bore: approx. 32 mm Three-jaw chuck diameter: approx. 160 mm Tailstock taper: MK3 Includes accessories: Four-jaw chuck Ø 160 mm, 6 tool holders, 4 pairs of turning jaws Overall dimensions (LxWxH): approx. 150x90x180 cm The machine can be inspected and tested at our premises by appointment. Loading options: with forklift or crane Shipping costs on request (depending on postal code) You will receive an invoice including VAT. Inspection and collection is possible by arrangement in 42855 Remscheid. Sale ex works 42855 Remscheid, free loaded. Subject to technical changes and prior sale.

Sąlyga: naujas, Gamybos metai: 2025, veikimo valandos: 1 h, Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 360 mm, veleno greitis (maks.): 2 300 aps./min, galia: 4 kW (5,44 AG), DR 180 S x 750 mm Lathe Conventional precision lathe with stepless control Centre height: 180 mm Hfjdpfx Astzkfkebmsr Distance between centres: 750 mm Bed width: 250 mm Swing diameter over bed: 380 mm Swing diameter over cross slide: 245 mm Swing diameter in bed gap: 500 mm Main spindle bore: 40 mm Main spindle mount: CAMLOCK D1-5 Spindle speed range: 0–2300 rpm Number of gear stages: 3 Main motor power: 4 kW Included: - 24 V LED machine lamp - FAGOR 40i TS 3-axis digital readout with constant cutting speed function - “Multifix” quick-change tool post with 5 holders - 3-jaw chuck - AIRLOC Schrepfer machine feet Machine available from stock immediately!

Sąlyga: geras (naudotas), Lead and feed screw lathe "Nardini MS 125 E" - Centre height over bed: 150 mm - Swing diameter over cross slide: 140 mm - Centre distance: 500 mm - Spindle speeds: 50–2500 rpm - Spindle bore: 34 mm - Automatic longitudinal and cross feeds - Thread cutting / Metric / Imperial Hfodpfsw Al Ulox Abmjr - Tailstock: Morse taper 3 - Multifix quick-change toolpost with holders - Quick-clamping collet system Type 173 E / incl. 16 collets - Change gears - Tool cabinet incl. various accessories - Machine feet - Chip guard (rear) - Drill chuck / Live centre - Work lamp - Documentation Dimensions: LxWxH: 1.6 x 0.7 x 1.6 metres / Weight: 1,250 kg Errors and omissions excepted

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2019, veikimo valandos: 720 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: D4D194801, sukimosi skersmuo virš skersinio stumduko: 190 mm, veleno skylė: 50 mm, tekinimo skersmuo virš slankiojančio stalo: 340 mm, centro aukštis: 170 mm, veleno greitis (maks.): 3 000 aps./min, The machine has been used for training purposes and has only approx. 720 spindle hours. TECHNICAL DETAILS Distance between centers: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Longitudinal carriage travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: infinitely variable Number of speed ranges: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric threads: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Between centers: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Center height above floor level: 1,103 mm Hsdpfev Iqm Ssx Abmofr Total weight: 755 kg Power supply: 400 - 440 V EQUIPMENT - 3-axis digital readout - Infinitely variable speed control - Röhm ZS 3-jaw chuck Ø200 - 5 x quick-change tool holders B25/120 - Tool set - Fixed center MK 5 - Turning tool set with parting tool (3 x standard, 1 x parting)

Sąlyga: naujas, Bernardo Lead and Feed Screw Lathe Master 180 including 3-axis digital readout Centre Distance: 1000 mm Centre Height: 180 mm Swing Over Bed: 360 mm Hodpfxed Du Tio Abmsfr Swing Over Gap*: 480 mm Swing Over Cross Slide: 220 mm Bed Width: 185 mm Spindle Bore: 51 mm Spindle Mount: DIN 55029, D1-5 Spindle Speed Range: (8) 70 – 2000 rpm Longitudinal Feed Range: (32) 0.052 – 1.392 mm/rev Cross Feed Range: (32) 0.014 – 0.380 mm/rev Metric Threads: (26) 0.4 – 7.0 mm Inch Threads: (34) 4 – 56 TPI Tailstock Quill Diameter: 42 mm Tailstock Quill Travel: 110 mm Tailstock Taper: MT 4 Motor Output S1 100%: 1.5 kW (400 V) Motor Input S6 40%: 2.2 kW (400 V) Machine Dimensions (W x D x H): 1920 x 750 x 1600 mm Approximate Weight: 540 kg * Removable gap length: 225 mm Scope of Delivery: • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Face plate 200 mm / D5, per DIN 55029 • Fixed steady rest – max. passage diameter 70 mm • Travelling steady rest – max. passage diameter 50 mm • Coolant system • Initial fill with Shell Tellus 46 • Pull-out chip tray • Clamping plate 320 mm • Four-way tool post • Safety guard for four-way tool post • Safety slip clutch • Micrometric longitudinal stop • Thread chasing dial • LED machine lamp • Reducing sleeve • Change gears • 2 centre points • Foot pedal with brake function (CE compliant) • Motor with electromagnetic brake (CE standard) • Machine stand

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Swing diameter over bed: 320 mm Swing diameter over cross slide: 185 mm Turning length: 1000 mm Spindle bore diameter / mount: 32 mm Spindle speeds (12): 85 - 2000 rpm Longitudinal feeds: 0.006 - 1.77 mm/rev Cross feeds: 0.003 - 0.888 mm/rev Thread cutting - metric pitch: 0.1 - 28 mm Thread cutting - module: 0.1 - 1.75 mm Hsdpfxotv Iibs Abmjfr Thread cutting - imperial pitch: 2.5 - 75 TPI Mains voltage: 400 V / 50 Hz Drive power: 2.2 kW Machine weight approx.: 0.8 t Space requirement approx.: 1.8 x 0.8 x 1.4 m Quick-change tool post with 5 holders Fixed steady rest 3-jaw chuck Ø 200 mm Coolant system

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, veleno skylė: 56 mm, centro aukštis: 180 mm, plotis centre: 1 000 mm, Dear Sir or Madam, For sale is a Weiler Commodor B lathe equipped with a new 3-axis digital readout from K+C (incl. 12 months manufacturer's warranty). The machine undergoes an extensive partial overhaul in our workshop, ensuring it is in excellent technical, geometric, and optical condition. You are welcome to visit us onsite and see for yourself. Availability: on request Center height: 180 mm Center distance: 1,000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2,000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Hfedpfx Ajwhzivjbmjr Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions (LxHxW): approx. 2.2 x 1.5 x 1 m Weight: approx. 1.8 t Further equipment and accessories: new 3-axis K+C digital readout, coolant system, chuck guard, pull-out chip tray, operating manual, and more accessories available on request. Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are at least workshop-tested - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can completely or partially overhaul the selected machine - On request, we can respray the machine in your desired color - On request, you can order additional accessories, such as tools - On request, we can also install additional equipment, such as safety features - We are happy to arrange shipping and/or onsite delivery for you

Sąlyga: geras (naudotas), WEILER COMMODOR L&Z tekinimo staklė - Tekinimo skersmuo 180 mm - Tekinimo ilgis 1000 mm - Strypo pratekėjimas 56 mm - Apsisukimų diapazonas 25-2000 aps./min - Sriegiai: metriniai / coliniai ir kt. - Automatiniai išilginiai / skersiniai pastūmos - Grąžtų stovas MK 4 - Trys žandikaulių griebtuvai 250 mm - Elektrinė griebtuvo apsauga - Multifix su įdėklu - Aušinimo skysčio sistema - Drožlių apsauginė siena - Staklių dokumentacija - Geras darbinis stovis Hedpfsw Nnvwsx Abmefr Matmenys: Ilgis x plotis x aukštis – 2,5 x 1,3 x 1,7 m / Svoris 1.500 kg Galimi netikslumai ar klaidos

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, veikimo valandos: 470 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: D4D210301, sukimosi skersmuo virš skersinio stumduko: 190 mm, veleno skylė: 50 mm, tekinimo skersmuo virš slankiojančio stalo: 340 mm, centro aukštis: 170 mm, veleno greitis (maks.): 3 000 aps./min, The machine was used for training purposes and has only approx. 460 spindle hours. TECHNICAL DETAILS Distance between centers: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Hfodpfx Asv Iqlzsbmsr Swing diameter over cross slide: 190 mm Travel of longitudinal slide: 600 mm Travel of cross slide: 220 mm Travel of top slide: 110 mm Turning tool section: 20 x 20 mm Main drive motor power: 5.3 kW Main Spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: stepless Number of speed ranges: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed Range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread Cutting Range Metric threads: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible Workpiece Weights Between centers: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Spindle height above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital readout - Infinitely variable speed control - Röhm ZS Ø200 3-jaw chuck (soft jaws, stepped inside and outside) - 5 x quick-change tool holders B25/120 - Tool kit - Fixed centre MK 5 - Turning tool set (3 x standard, 1 x parting-off)

Sąlyga: naujas, Bernardo Universal Lathe Master 360 Pro Centre Distance: 1000 mm Centre Height: 180 mm Swing over Bed: 360 mm Swing over Gap*: 502 mm Swing over Cross Slide: 220 mm Bed Width: 185 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1-5 Spindle Speed Range (8): 70 - 2000 rpm Longitudinal Feed Range (32): 0.052 - 1.392 mm/rev Cross Feed Range (32): 0.014 - 0.380 mm/rev Metric Threads (26): 0.4 - 7.0 mm Imperial Threads (34): 4 - 56 TPI Tailstock Quill Diameter: 42 mm Tailstock Quill Stroke: 100 mm Tailstock Taper: MT 3 Rated Motor Power S1 100%: 1.5 kW (400 V) Motor Power Consumption S6 40%: 2.2 kW (400 V) Machine Dimensions (W x D x H): 1825 x 750 x 1600 mm Weight approx.: 576 kg Hfjdpfx Asd I H Izjbmor *Removable Gap Bed Length: 205 mm Scope of Delivery: • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Face plate 200 mm / D5, per DIN 55029 • Fixed steady rest – max. workpiece diameter 70 mm • Travelling steady rest – max. workpiece diameter 60 mm • Coolant system • Initial fill with Shell Tellus 46 • Pull-out chip tray • Clamping plate 280 mm • Four-way tool post • Safety guard for four-way tool post • Safety slip clutch • Micrometer longitudinal stop • Thread dial indicator • LED machine lamp • Reducing sleeve • Change gears • 2 centre points • Foot pedal with brake function (CE compliant) • Motor with electromagnetic brake (CE compliant) • Base with drawers • Operating tools

Sąlyga: naujas, Lead and feed screw lathes WEILER COMMODOR 180 GSD - New machine / showroom machine / unused - 3-axis digital readout - CE marking - Centre height: 180 mm - Centre distance: 1000 mm - Bar capacity: 56 mm - Swing over bed: 380 mm - Swing over cross slide: 215 mm - Speed range: 25 - 2000 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric / inch / diametral - Tailstock taper: MT4 - Tailstock quill stroke: 150 mm - Coolant system - Multifix quick-change toolpost with insert - 3-jaw chuck, 200 mm - Work light - Chip guard/rear splash guard Hfodjwucv Repfx Abmer - Documentation Dimensions: LxWxH: 2.4 x 1.4 x 1.7 meters / Weight: 1700 kg Errors and omissions excepted.