Centro tekinimo staklės

WEILER Commodor B - Teilüberholt

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe from year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop. Among other things, the main spindle bearings as well as the lead/feed screw bearings have been completely replaced! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify on site. Availability: on request Machine no.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Laedpfx Amsthd She Reg Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Possible threads: Metric, Imperial, Module, Diametral-Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, removable chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various clamping jaws... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can carry out a complete or partial overhaul of the selected machine - Upon request, we can repaint the selected machine in your preferred color - Upon request, you can order additional accessories such as tools directly - Upon request, we can also install further accessories, such as safety equipment - We are happy to take care of shipping and/or installation

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 230 mm, tekėjimo ilgis: 810 mm, Įranga: dokumentacija / vadovas, A like-new machine with accessories and complete documentation. Please examine the photos carefully for the machine hours!!!!! The machine will be available in approximately 4 weeks. Control Heidenhain MANUALPlus 640 HSCI - TFT 15.1" screen - Control panel with alpha keyboard for comments and numeric keypad - Operator station adjustable by 250° Driven tool turret - 8 tool stations - Tool drive via gears and coupling - Adjustable drive speed, max. 4000 rpm - Milling with slot drill Ø xtxv 12mmX8mmX45mm/min, C-axis via main drive - Main spindle speed 0.001°/min - 100 rpm Horizontal bed - Hardened and ground prism/flat guideways Work area - Swing diameter over bed: 400 mm - Swing diameter over cross slide: 230 mm - Cross slide travel (face): 220 mm Main spindle drive - Digital AC motor – 50% duty cycle, 16 kW Headstock - Spindle nose: DIN 55026 A6 - Spindle diameter at front bearing: 115 mm - Spindle bore: 82 mm - Speed range: 1-3500 rpm Cross slide - Feed range (face): mm/rev; Feed range (longitudinal): mm/rev; Thread pitches: 0.01-999.9 mm - Rapid traverse (face/longitudinal): 5/10 m/min - Automatic central lubrication - Digital AC servo motors for face and longitudinal axes Tailstock - Quill diameter: 60 mm - Quill travel: 140 mm - Morse taper: MT 4 - Clamping on bed with stay bolts - Manual operation and clamping of quill - Tailstock roller guide CNC control - HEIDENHAIN MANUALplus640 HSCI - Constant surface speed for manual and automatic turning - Electronic stop turning and automatic turning - Easy cycle input in dialog with graphic images - Contour cycles: roughing and finishing, longitudinal and facing with tapers, radii, and chamfers - Drilling cycles with/without chip breaking - Drilling/circular hole pattern cycle for axial and radial centering/drilling - Undercut cycles to DIN 76 and DIN 509 Form E+F - Special undercuts - Grooving - Threading: cylindrical, conical, face threads with constant or variable pitch, and depth suggestion - Thread cutting cycle with chip breaking function - Thread repair - Variation options within cycles - ICP interactive contour programming - Programming per DIN 66025 - Structured programming (UNTS) - Parallel programming - Geometry input absolute or incremental - Feed input mm/rev or mm/min - Input of a safety zone before chuck or simple stop - Graphic program simulation (line or toolpath) Simulation single block or total program - Oriented spindle stop with angle specification - Automatic program run Selectable single block or consecutive cycles (with door interlock) - Tool memory for 250 tools - Convenient tool file - Technology database with 9 material-tool combinations - Assignment of cutting speed/spindle speed and feed - Parts program memory: 1.8 GB Standard accessories - Chip tray - LED machine lamp with energy-saving function - Levelling elements - Main motor fan controlled by temperature - Single-chamber filter for coolant cleaning built into coolant line (40 micron) - Complete documentation Lajdoy Tzhpopfx Am Rog

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP4M with 3-axis Heidenhain Active digital readout – Excellent condition, CE compliant! Technical Data: >> Year of manufacture: 1992, Machine No. 2203-8449 >> Rigid angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travels (X/Y/Z): 500 / 400 / 400 mm >> Vertical milling head adjustable on spindle carrier >> Vertical and horizontal quill - SK40 taper >> Vertical quill extendable by 90 mm >> Hydraulic clamping system Laodpfou Tuk Hsx Am Rsg >> Weight approx. 1,600 kg Accessories and Equipment: >> 3-axis active digital readout by Heidenhain >> Coolant system >> Chip tray >> Centralized electric lubrication >> Operation manual, spare parts diagrams About the machine: Offered here is a Deckel FP4M Active universal milling machine in excellent condition. The machine has minimal backlash and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs smoothly. The machine features hydraulic clamping. The FP4M has only been used occasionally in a governmental training facility. On this newer FP4 model, the feed rate is steplessly adjustable in all three axes, and there is rapid traverse available for each axis. A major advantage is the Heidenhain 3-axis active digital readout. With this Heidenhain position control, you can input dimensions which the machine then automatically moves to. An oil change has been performed; mechanically and electrically inspected. The Heidenhain digital readout system makes operation easier and even more precise. Take the opportunity to view and test this machine under power on site.

Būklė: naudotas, Gamybos metai: 1987, Technical details: Number of spindles: 8 Spindle passage: 51 mm Item: Multi-spindle automatic lathe Manufacturer: Schütte Model: AF51 Year of manufacture: 1987 Six-spindle automatic lathe 8 main spindles Max. nominal passage D=51mm Control: SIEMENS SIMATIC S5 Gripper in position 7 for rear-side machining Thread cutting drive Independent feed in positions 2/3 Electronic cam switch Balluff Lsdpfx Amoiay Sfo Roag Plain text display Wöhrle Coolant auxiliary pump Magnetic cartridge filter Oil operation Including loading magazine IEMCA PRA40/37/F, year 1987 (bundle loader) Painted in light blue and light grey Tool configuration may differ from the illustrations. Please contact us for more information and photos via email (at) or *

Būklė: geras (naudotas), Gamybos metai: 2010, Horlemann HR10U-S Switchgear 12 kV HR 10U – the universal switchgear for industry and utilities Modular medium-voltage switchgear for the distribution of solar power Switchgear: Manufacturer: Horlemann Configuration: KKÜHTTT Type: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short-circuit withstand: 20 kA/1s Height: 2060 mm Width: 1300 mm Depth: 800 mm Cell width: 7 x 650 mm Busbar: AL 50 x 10 mm Weight: approx. 620 kg HR10U Rated Data: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV Ip: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1s) IP: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast Resin Transformer: Design: Cast resin Primary voltage: 10 kV Secondary voltage: 400–230 V Configuration: Dyn5 Year of manufacture: 2010 Height: 1740 mm Width: 1300 mm Depth: 900 mm Weight: 1.8 t The switchgear features pressure relief via a pressure relief chamber located in the lower section of the switch panel. Documentation: Test report Wiring diagram Financing through our bank is also possible. komplett-konzept.leasingo.de You will find more new and used items in our shop! Ljdonfu Dyepfx Am Roag International shipping costs on request!

Būklė: naudotas, TIG Welding Machine L-TEC Model Inverter TIG 200 DC TIG welding machine for direct current (DC) Serial no. 184548 Year of manufacture: approx. 1994 Output: 200 amps = 60% duty cycle 155 amps = 100% duty cycle Adjustable range: stepless Current type: DC (direct current) Power supply: 400 V, 50 Hz, 32 amp plug Ledpfjdzqb Eox Am Rsag - 4 meter torch package with central connector and hand torch - with remote potentiometer (foot pedal) - gas pressure regulator - Direct current only = DC - HF ignition Dimensions W x D x H: 850 x 480 x 740 mm Weight: approx. 150 kg Welding test delivers very good results when welding stainless steel with direct current. Otherwise in good condition.

Būklė: naudotas, Gamybos metai: 1991, Drilling capacity in steel (diameter) 50 mm Outreach 1100 mm Workpiece height - max. approx. 1000 mm Drilling capacity in cast iron 60 mm Spindle taper MK 5 Spindle speeds 28 - 2500 rpm Feeds 0.05 - 2 mm/rev Quill stroke 300 mm Distance base plate - spindle nose 630 - 1380 mm Vertical arm adjustment 750 mm Ledpfx Aou Sblwem Rjag Total power requirement 6 kW Machine weight approx. 4 t Machine dimensions L x W x H 2,740 x 1,140 x 2,590 mm - with tapping unit - Accessories: Cube table LxWxH = 550 x 550 x 550 mm, machine vice, coolant system

Būklė: naudotas, Gamybos metai: 1966, Max. pulling force 5 t, maximum stroke 850 mm, maximum cutting speed 12 m/min, maximum return speed 25 m/min, clamping surface 410x575 mm, slot width 3 - 90 mm, drilling diameter 13 - 500 mm, workpiece weight: 6000 kg, depth of machine base below floor 1,400 mm. Ledpfocm Elnex Am Roag

Būklė: naudotas, Gamybos metai: 1996, Technical details: Grinding diameter: 1.5 - 75 mm Grinding wheel diameter: 400 mm Grinding wheel width: 160 mm Working stroke: 0 - 1 mm Feed rate: stepless/continuous mm/min Grinding wheel speed: 1300 rpm CNC control: Num 1020 GC Total power requirement: 14 kW Machine weight approx.: 3.8 t Machine dimensions: 3.0x2.2x2.2 m Ljdeu Ngyzepfx Am Rjag Control cabinet dimensions (LxWxH): 1.5x0.4x2.0 m CENTERLESS EXTERNAL CYLINDRICAL GRINDING MACHINE for alloyed round steels, plunge-cut and through-feed grinding. - With the plunge-cut method, the maximum plunge length is 160 mm. - Automatic workpiece discharge via rail (the function/operation of which is not known to WMW AG) - Working grinding wheel with dressing device, speed = 1300 rpm. - Regulating wheel with dressing device, infeed angle right 0-6° and left 0-2°; wheel size 280x160 mm - Automatic grinding wheel balancing system Condition: Reference run not possible Machine does not operate in automatic mode Accessories: various grinding and regulating wheels available on request

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1976, Universal milling machine Manufacturer: DECKEL Model: FP 1 Lasdjmhfrropfx Am Rog Year of manufacture: 1976 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5008 grey blue Machine no.: 52860/08 Milling head no.: 7296/80 Warranty: 12 months, single-shift operation from delivery, covering the mechanics overhauled by us. Electrical and electronic systems are excluded from the warranty, as they have only been function-tested. For machines located outside our North Bavarian sales region, travel costs are to be borne by the customer. Geometric inspection with inspection protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system - Operating manual Used, as inspected Technically, the machine corresponds to the state of the art at the time of manufacture.