Universalios apdirbimo staklės nuo 1000 mm X eiga pirkti naudotą (158)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, X ašies eiga: 2 600 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 700 mm, greitas poslinkis X ašimi: 40 000 m/min, greitas poslinkis Y ašis: 40 000 m/min, greitasis eiga Z ašyje: 40 000 m/min, stalo plotis: 750 mm, stalo ilgis: 2 900 mm, stalo apkrova: 2 150 kg, 5-Axis Machining Center DMG MORI - DMF 260-7 X-axis travel: 2600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm A-axis travel: 360,000° B-axis travel: -110 to +110° Table length: 2900 mm Table width: 750 mm Table load capacity: 2150 kg Table diameter Ø: 750 mm Feed rate X-axis: 40,000 mm/min Feed rate Y-axis: 40,000 mm/min Feed rate Z-axis: 40,000 mm/min Tool holder: 40 ISO/BT/MK Spindle power: 35 kW Spindle speed: 18,000 rpm Tool changer: 30 positions Internal coolant supply (IKZ): 20 bar Number of controlled axes: 5 Chip conveyor: Yes Coolant unit: Yes Fodpfx Ajxuqv Ajhwepd Length: 8,400 mm Width: 3,423 mm Height: 2,620 mm Weight: 16,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 000 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 1 200 mm, veleno greitis (maks.): 5 000 aps./min, Įranga: drožlių transporteris, TECHNICAL DETAILS Travel distances X-axis travel: 2,000 mm Y-axis travel: 1,000 mm Z-axis travel: 1,200 mm Main spindle Speed range: 20 – 5,000 rpm Gear stages: 2 Drive power: 30 kW (100%) / 45 kW (40%) Torque: 1,050 Nm / 1,580 Nm Tool holder: HSK 100 B-axis swivel range: +/- 180° B-axis indexing: 0.001° Worktable Clamping surface: 1,000 x 2,000 mm Max. table load: 4,000 kg T-slot spacing: 100 mm T-slots: 18 H7 Number of T-slots: 10 Tool magazine Number of tool stations: 40 Tool holder: HSK 100 Fpedpfxexb A Azj Ahwed Tool change time: 10 s Max. tool diameter: 250 mm Max. tool length: 400 mm Max. tool weight: 20 kg Feed rates Feed rate X, Y, Z: 0 – 20,000 mm/min Feed rate B: 10 min⁻¹ Power X, Z: 15.7 kW Power Y: 8.5 kW Power B: 2.5 kW Feed force: 22,500 N MACHINE DETAILS Footprint & Weight Approx. space requirement: 8.0 x 8.0 x 3.3 m Approx. machine weight: 23,000 kg EQUIPMENT 2x tool cabinets for holders Ringler chip extractor Chip conveyor Coolant system High-pressure cooling Internal coolant supply Oil mist extractor Paper band filter Spindle oil cooler Blum TC 60 touch probe Electronic handwheel Automatic door

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2014, Immediately available: Gantry-type machine FS 2100 • Total travel range X = 21,000 mm, ideal for flexible large-part machining • Travel ranges: X = 21,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control system with wireless handwheel HR 550 FS, operator’s cabin mounted on the gantry • 2-axis NC universal boring and milling head, full simultaneous and positioning operation for each gantry • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for guidance and drive protection • 4 work stations per gantry • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor at the rear of the unit • Process monitoring ToolScope base system Fjdoxt En Dopfx Ahwspd • Additional control panel at the rear of the machine • Partial enclosure consisting of machining compartment and sheet metal door, rear with protective fence for direct view into workspace • Includes fixators • Cooling aggregates • Includes internal tool cooling (closed cooling circuit) with chiller • Short delivery time, available immediately — subject to prior sale — Viewing by appointment possible Spindle hours: approx. 9,079 SPECIAL PRICE!

Būklė: naudotas, Gamybos metai: 2005, x-axis travel: 1,000 mm y-axis travel: 1,000 mm z-axis travel: 1,000 mm Control: Siemens 840 D Spindle speed range: 20 - 18,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 121 Nm Tool interface: HSK-A63 Tiltable B-axis: -30° / +180° Swivel time: 1.2 s Number of pallets: 2 Pallet size: 1,000 x 800 mm Max. workpiece weight: 1,500 kg Rotatable C-axis: 360° Number of tool stations: 180 positions Fodpfxowf Rgfs Ahwspd Tool interface: HSK-A63 Total power requirement: 78 kVA Machine weight: approx. 27.0 t Space requirement: approx. 8.0 x 7.0 x 3.4 m 5-axis CNC universal machining center DECKEL MAHO - DMC 100 U duoBLOCK - Swivel milling head (B-axis) - NC rotary table (C-axis) - Pallet changer - 180-position tool magazine - WITHOUT zero-point clamping system - WITHOUT RINGLER extraction unit - WITHOUT tools

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2016, veikimo valandos: 22 710 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 000 mm, Y ašies eiga: 1 800 mm, Z ašies eigos atstumas: 1 000 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 000 mm, TECHNICAL DETAILS Travel distances X: 2,000 mm Y: 1,800 mm Z: 1,000 mm Table size: 1,000 x 1,000 mm Control system Heidenhain iTNC640 Rotary table Table plate: 1,000 x 1,000 mm Max. rotation speed: 50 rpm Max. centered table load: 3,500 kg Main spindle and milling heads Motor spindle Max. speed: 18,000 rpm Max. power: 37 kW Max. torque: 117 Nm Tool holder: FISK 63 A Lubrication/cooling: oil/air mixture Coolant and chips Max. pressure: 50 bar Max. flow rate: 20 l/min Tool changer Number of positions: 84 Tool holder: HSK63A Tool diameter: 70 mm Tool length: 340 mm Tool weight: 6 kg Measuring Laser tool measurement: Metaster BLUM TC60 Pallet changer Max. pallet size: 1,000 x 1,000 mm Max. centered pallet load: 3,000 kg Fpjdpfx Ahjw Ngyzswod MACHINE DETAILS Model: Parpas Roller XL Machine type: high-speed milling machine 5-axis machining Rotary table drive: torque motor EQUIPMENT Direct measuring system for rotary table Hydraulically clampable milling head Coolant system with high-pressure pump and paper band filter Two screw conveyors for chips Link belt conveyor Automatic sliding door for pallet changer Interlocked access doors for storage stations Tool breakage detection with laser tool measurement

Būklė: naudotas, Gamybos metai: 2003, x eiga 2 000 mm y eiga 1 000 mm z eiga 1 200 mm Valdymas TNC 430 Heidenhain Pagrindinio veleno apsukų diapazonas 20 - 5 000 min⁻¹ Pavarų laipsniai 2 Pagrindinio veleno variklio galia 30 (100%) / 45 (40%) kW Sukimo momentas 1 050 / 1 580 Nm Įrankio tvirtinimas HSK 100 B ašis pasukama: +/- 180° B ašies padala: 0,001° Stalo darbinis paviršius 1 000 x 2 000 mm Maks. stalo apkrova 4 000 kg Tarpas tarp griovelių 100 mm T formos grioveliai 18 H7 T formos griovelių kiekis 10 Įrankių vietų skaičius 40 vietų Įrankio tvirtinimas HSK 100 Įrankio keitimo laikas 10 sek. Maks. įrankio skersmuo 250 mm Fpjdpfsxmag Iex Ahwsd Maks. įrankio ilgis 400 mm Maks. įrankio svoris 20 kg Poslinkio greitis X,Y,Z: 0 - 20 000 mm/min Poslinkio greitis B: 10 1/min X,Z galia: 15,7 / Y: 8,5 kW B galia: 2,5 kW Poslinkio jėga 22 500 N Staklių svoris apie 23 t Reikalinga vieta apie 8,0 x 8,0 x 3,3 m 4 ašių apdirbimo centras – universalus REIDEN - BFR 22 - įsk. 2x įrankių spintos - įsk. 3x ištraukiamos spintos - įsk. 1x darbo stalas - įsk. Ringler drožlių siurblys

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2014, Immediately available travelling column machine FS 1200 Fpedpfexmr Uqox Ahwjd • Total travel X = 12,000 mm, ideal for flexible large-scale machining • Travel distances: X = 12,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control with wireless handheld unit HR 550 FS, operator cabin on the travelling column • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air supply up to 6 bar • Dust protection packages for protecting the guides and drives • BA 4 per travelling column • Wireless measuring probe RMP 60, manufacturer: Renishaw • Work area monitoring with network camera and monitor at the rear of the system • Process monitoring ToolScope basic system • Additional control panel at the rear of the system • Partial enclosure consisting of machining area and steel door, rear side with protective fence offering clear view of the machining area • Incl. mounting feet • Cooling units • Incl. internal tool cooling (closed cooling circuit) with chiller • Short delivery time, immediately available — subject to prior sale — Viewing by appointment possible Spindle hours: approx. 9,079 SPECIAL PRICE!

Būklė: geras (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 1 994 h, X ašies eiga: 1 000 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 1 000 mm, valdiklių gamintojas: Fanuc, valdiklio modelis: Fanuc 31i-B, tvirtinimo skersmuo: 100 mm, ašies skaičius: 1, veleno greitis (maks.): 10 000 aps./min, Operating hours: 7,194 Effective operating time: 1,994 Year of manufacture: 2019 Control: Fanuc 31i-B Spindle: PC 100i (10,000 rpm) Fedpfevvmnuox Ahwepd Tool clamping system: HSK 100 Magazine / stations (options): chain/50 Rotary table: 360.000° x 0.001° Coolant system: KNOLL, KF 400, high-pressure internal coolant 70 bar Working area XYZ (mm): 1000 / 1000 / 1000 Pallet size (mm): 630 x 630 Workpiece clamping: hydraulic, 80 bar Additional options, special features: HELLER planing device; receiver for wireless probing system (RENISHAW); coolant temperature controller; predictive collision avoidance; interface for mist extraction (emulsion operation); 3-color LED status lamp; work area rinse; scraper-type chip conveyor for wet machining; rapid drill breakage detection (SBBK); MSK; thermal expansion compensation; feed force display; automatic setup and removal sequence; increased tool weight up to 35kg magazine; tool coding on shank. As response emails via Machineseeker often end up in the spam folder, we kindly ask you to check this folder regularly or contact us directly.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 200 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 700 mm, valdiklių gamintojas: HEIDENHAIN, valdiklio modelis: TNC 426 M, veleno greitis (maks.): 6 300 aps./min, TECHNICAL DETAILS X travel: 1,200 mm Y travel: 600 mm Z travel: 700 mm Axes: 4 Spindle speed: 20 – 6,300 rpm Control unit: HEIDENHAIN TNC 426 M Fedpfx Ahswurwqewepd Table load capacity: 800 kg Worktable dimensions: 1,200 x 630 mm Tool holder: SK40 MACHINE DETAILS Machine height: 2,950 mm Machine weight: approx. 8,800 kg

Būklė: naudotas, Gamybos metai: 2008, Travel path - X axis: 10,000 mm Travel path - Y axis: 1,000 mm Travel path - Z axis: 500 mm Control system: SIN840D Profile length: 7,200 mm Profile width: 300 mm Profile height: 300 mm Max. workpiece dimensions: 8,000 x 1,000 x 300 mm Spindle speeds - stepless: 1 - 24,000 rpm Drive power: 15.00 kW Tool holder: HSK-A50 Feed rate X / Y axis: 1 - 60,000 mm/min Feed rate Z axis: 1 - 20,000 mm/min Fpodev T Nn Sopfx Ahwod B axis: +/- 180° C axis: 360° Tool magazine: 24 Max. tool length: 240 mm Tool diameter: 95 mm Tool diameter with 2 free spaces: 200 mm Max. saw blade diameter: 350 mm Working area: 7,200 x 300 mm Total connected load: 30.00 kW Machine weight approx.: 14.00 t Space requirement approx.: 13.00 x 5.50 x H3.80 m 5-axis high-speed machining center equipped with SIEMENS SINUMERIK 840D control, high-frequency spindle RECKERTH, 8 carrier units each fitted with a pneumatically actuated clamping device, arranged in the Y-direction and program-controlled, position-adjustable in the X-direction via individual positioning axes. Tool measurement system: BLUM. Machine can be inspected under power.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, veikimo valandos: 150 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 800 mm, Y ašies eiga: 1 150 mm, Z ašies eigos atstumas: 650 mm, greitas poslinkis X ašimi: 48 m/min, greitas poslinkis Y ašis: 48 m/min, greitasis eiga Z ašyje: 48 m/min, nominali (akivaizdi) galia: 35 kVA, sukimo momentas: 120 Nm, valdiklių gamintojas: Heidenhain, valdiklio modelis: TNC7, stalo apkrova: 2 000 kg, sukamosios stalo skersmuo: 800 mm, bendras svoris: 18 600 kg, veleno greitis (min.): 20 000 aps./min, ašies variklio galia: 34 000 W, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Naujos būklės demonstracinis įrenginys, lazeris, jutiklis, konfigūruojamas įrankio vidinis aušinimas (IKZ) Fpjdpfsxbzyrjx Ahwod

Būklė: naudotas, Gamybos metai: 1991, x-travel 1200 mm y-travel 600 mm z-travel 600 mm Total power requirement 25 kW Machine weight approx. 11.5 t M A H O CNC-controlled Universal Bed-Type Machining Center Model MH 1200 S (#120012) Year of manufacture 1991, partially overhauled and modernized by MMD in 2007 _____ X-axis (longitudinal) X 1,200 mm Y-axis (vertical) Y 600 mm Z-axis (cross) Z 600 mm Table size (CNC rotary table) 1,000 x 800 mm Max. overhang 900 mm Spindle taper SK 40 Fjdpfx Ahet Hwqwewopd Spindle speeds (infinitely variable in 2 steps) 20 – 6,300 rpm Workpiece weight approx. 1,000 kg Feeds/rapid traverse in XYZ axes 1 - 4,000 / 12,000 mm/min Feed/rapid traverse in B axis 1-1500°/10 rpm Spindle drive 15 kW Total drive approx. 25 kW - 380 V - 50 Hz Weight approx. 11,500 kg (LxWxH = 2.95 x 3.70 x 2.80) Accessories / Special equipment: • MAHO CNC - 5-axis path control unit Type CNC 432 with color display, graphics, all standard subprograms and cycles, with portable hand control, RS 232 interface for external data transfer • CNC rotary table (B axis); in combination with the swiveling milling head 5-axis machining is possible, 360,000° resolution • Vertical, swiveling milling head with hydraulic tool clamping • Horizontal milling spindle with hydraulic tool clamping • CNC-controlled tool changer with 36 positions, tool life monitoring and tool breakage detection • Separate coolant system (no internal coolant supply), complete enclosure with large sliding doors, chip conveyor, oil cooler for the hydraulics Condition: Very good – ready for demonstration under power Very solid machine for heavy-duty cutting; machine was partially overhauled, geometrically inspected, and mechanically & electrically checked by MMD in 2007. "Super machine" – for the expert. Delivery: Ex-stock – as inspected Payment: Net – upon receipt of invoice

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1997, X ašies eiga: 5 000 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 800 mm, veleno greitis (min.): 60 aps./min, veleno greitis (maks.): 6 000 aps./min, veleno nosis: SK40, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, AXA VHC 2 - 5000M Retrofit Siemens 840C SK40 / 36 įrankių Stalas 5000x500mm Aušinimo skystis 700l Geros būklės. Galima apžiūrėti veikiančią. Fpedpew Tkz Rsfx Ahwsd

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 530 mm, Y ašies eiga: 530 mm, Z ašies eigos atstumas: 465 mm, veleno greitis (maks.): 12 000 aps./min, įrankių magazino lizdų skaičius: 54, TECHNICAL DETAILS Control: Sinumerik One - Spios 24 Touch Travel X: 1,530 mm Travel Y: 530 mm Travel Z: 465 mm Spindle and Tool System Number of tools: 54 Milling spindle: High-precision milling spindle, in-line spindle with direct drive (no belt) Spindle speed: max. 12,000 rpm Spindle power: 15.2 kW Spindle torque: max. 97 Nm Tool holder: SK40 DIN 69871 Changer type: Double gripper Spindle pressure: 22 bar Table System Rotary-tilt table: 2-axis, D = 650 mm Table design: Precision version "T" Fixed table: left in the working area Fpjdpfx Aswu Ebijhwed Hydraulic brake: on B and C axis Rotary feed-through: dual, in the center of the C axis Table load: 500 kg B axis: -5°/110° Direct Measuring System: on B and C axes Direct measuring systems: on X, Y and Z axes Control Unit Control type: Siemens SINUMERIK ONE Language selection: CNC dialog in German, English as second language Touch panel: SPIOS Touch V2 Operation: Multi-control wheel, multifunctional handheld device Software: Machining software: ONE-Dyn. Operate 3A-Fr Programming function: ShopMill step programming Axis machining: 4 axes with rotary axis 3D function: 3D simulation of workpiece Rest material detection: included DXF reader: single license Machining tracking: process path tracing Kinematic measurement: Cycle 996 Memory expansion: 2 GB additional user memory Probing features: for integration of touch probes MACHINE DETAILS Cooling and Pressure Universal chip conveyor: with coolant tank High-pressure tank: 22 bar Spindle preparation: for high pressure Blow air: additional blow air at spindle head Spindle probe preparation: available Robot Integration Robot door: available Interface: UNIROB universal robot interface Electrics Operating voltage: 3×400 V ±10 % Line frequency: 50 Hz (±2 %) Network type: TN network (5-wire system) Standards: Technical design in accordance with CE EQUIPMENT - Chip conveyor - Blow air at spindle head - Robot door, right side - UNIROB universal robot interface - BLUM spindle probe

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 600 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 780 mm, valdiklio modelis: HEIDENHAIN TNC 426, veleno greitis (maks.): 2 500 aps./min, TECHNINĖS DETALĖS Eigos kelias X eiga: 1 600 mm Fpsdpfexb Rpcjx Ahwed Y eiga: 1 000 mm Z eiga: 780 mm Apdirbimo ašių skaičius (be lygiagrečių ašių): 5 Stalas Tvirtinimo paviršius (kairė-dešinė): 1 000 mm Tvirtinimo paviršius (priekinis-galinis): 1 000 mm Ruošinio svoris (maks.): 6 000 kg Sukamoji ašis: C > Pozicionavimo tikslumas 0,001 ° Frezavimo galvutė/įrankio galva Veleno tipas: šarnyrinis galvutė    > Pozicionavimo tikslumas 2,5 ° Sūkiai: iki 2 500 /min Įrankio tvirtinimas: ISO SK 50 Variklio galia: 22 kW Įrankių magazinas Įrankių pozicijos: 60 Ruošinio automatizacija Sandėliavimo vietų skaičius: 2 Padėklo ilgis: 1 000 mm Padėklo plotis: 1 000 mm Padėklų skaičius: 2 ĮRENGINIO DETALĖS Matmenys ir svoriai Užimama vieta (kairė/dešinė): 6 400 mm Užimama vieta (priekinis/galinis): 6 900 mm Bendras aukštis: 4 000 mm Bendras svoris: apie 26 000 kg Valdymas: HEIDENHAIN TNC 426

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, TECHNINĖ INFORMACIJA Eigos X / Y / Z: 1.250 / 880 / 800 mm Valdymas: Heidenhain Sūkių dažnis: 10.000 aps./min B ašis: automatinė Įrankių keitiklio vietų skaičius: 60 Įrankio laikiklis: SK-50 Padėklų skaičius: 2 vnt. Padėklo išmatavimai: 1.000 x 800 mm ĮRENGINIO DUOMENYS Įjungimo laikas: 59.112 val. Fpjdpfxsxdnclo Ahwed Veleno darbo valandos: 21.619 val. Įrenginio transportavimo matmenys: 5,5 x 3,0 x 3,1 m; 14,3 t ĮRANGA - Elektroninis rankenėlė - MillPlus 3D trajektorijos valdymas - Oro pūtimas per veleno centrą - Matavimo zondas - Išplovimo pistoletas - Dokumentacija - Drožlių transporteris (vyrių juosta) - Aušinimo sistema - Alyvos rūko ištraukimo sistema

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2012, Model: MILL 2000 5 Axis CNC: SIEMENS 840 Travel (X, Y, Z in mm): 2000 – 480 – 630 Swiveling Head (B axis): +/- 100° Fsdpfjiraffox Ahwspd Rotary Spindle NC Rotating Device with Clamping Chuck Bar Machining Milling Head: 12,000 rpm / 140 Nm Tool Magazine: 163 HSK-A 63 DIN 69893 Coolant through Spindle (IKZ): 70 bar Heidenhain Linear Measurement System Touch Probe 3D Touch System: Renishaw Chip Conveyor

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Control: Heidenhain TNC 640 Working Area Travel X: 1,020 mm Travel Y: 520 mm Travel Z: 610 mm Clamping Surface (L x W): 1,160 x 520 mm Table Load Capacity: 750 kg Spindle Speed: 15,000 rpm Direct Drive Tool Holder: SK40 (BigPlus) DIN 69872 General Tool Changer: 30-position (double gripper) Machine Bed: High-strength Meehanite cast iron Repeatability: 0.008 mm Fpodpfx Ahst Dizvswsd Chip Management: Chip conveyor including chip flushing within the work area Coolant Management: Internal coolant supply (ICS 30 bar) Cooling Air: Programmable external cooling Temperature Management: Automatic spindle chiller Run-in Support: Electronic handwheel Workpiece and Work Area Cleaning: Rinse and compressed air gun Coolant Cleaning: Oil skimmer Network Connectivity: Ethernet interface

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, valdiklių gamintojas: Heidenhain, valdiklio modelis: TNC 640, Working area Travel X: 1,250 mm Travel Y: 950 mm Travel Z: 580 mm Clamping surface (L x W): 1,360 x 960 mm Max. table load: 2,000 kg Spindle Technology: Direct drive Speed: 15,000 rpm Tool holder: HSK63-A General Tool changer: 30-fold Machine bed: High-strength Meehanite cast iron Rapid traverse (X/Y/Z): 30 / 30 / 30 m/min Equipment Chip management: Scraper belt chip conveyor Chip flushing in working area Measuring system: Direct (linear scales) Coolant management: Internal coolant supply (ICS 30 bar) Part and workspace cleaning: Rinsing and compressed air gun Fpsdpfjwptd Iox Ahwsd

Būklė: geras (naudotas), Gamybos metai: 2004, X ašies eiga: 6 000 mm, Y ašies eiga: 630 mm, Chiron Mill 6000 / 2013 kapitališkai atnaujintas Chiron, pagaminimo metai 2004 / 2013 kapitališkai atnaujintas, valdymas Siemens 840 D, eigos kelias X/Y 6000/630, galimas švytuoklinis apdirbimas, įrankių keitiklis, 92 pozicijos, laikiklis HSK - A 63, veleno apsukos iki 12 000 aps./min., veleno keitimas 2021 m., NC šarnyrinis frezavimo galvutė, hidraulinė agregatas 210 bar, 2 hidrauliniai spaudimo kontūrai, atskirai reguliuojamas spaudimo slėgis kiekvienai švytuoklės zonai, spaudimo kontrolė, pneumatinis ruošinio atmušėjas, 2 atskirai valdomos pneumatinės iškėlimo įrengimai, Brankamp susidūrimo stebėjimas, grandininis transporterio konvejeris, OKZ paruošta, vakuuminis rotacinis filtras Knoll, rotuojantis matymo langas, automatinės pakrovimo durys, 5 ašių frezavimo paketas, IKZ 70 bar, alyvos rūko ištraukimas, galimas švytuoklinis apdirbimas, švytuoklinio apdirbimo X eiga 1773 mm su priekinės dalies apdirbimu (įrankio ilgis 120 mm), linijinė prispaudimo sistema su 8 spaustuvais. Fjdpfx Aow N Nvfjhwopd

Būklė: geras (naudotas), Gamybos metai: 1999, Hermle U 1000 T, Year of manufacture: 1999, Control: Heidenhain TNC 426, Travel X/Y/Z: 1000/630/550 mm, Tool changer: 16 positions, Fpodjwlqimopfx Ahwsd Tool holder: SK 40, Spindle speed up to 7,000 rpm, Quill stroke vertical spindle: 75 mm, Universal milling head: 0 – 90°, Direct measuring systems, Table size: 1200 x 630 mm, Heidenhain probe TS 632, Electronic handwheel,

Gamybos metai: 2005, būklė: paruoštas naudoti (naudotas), DESCRIPTION: Control: BOSCH – 3-axis TFT color screen TECHNICAL DATA The machine is equipped with a twin spindle, each independently adjustable in height. 4 x hydraulic chucks, diameter 300 mm (2 left, 2 right), with partition for pendulum operation – the partition can be removed if required for machining long workpieces. Working area: X-axis: 3500 mm Y-axis: 600 mm Z-axis: 700 mm Drive power (40% duty cycle): 32 kW Fpodpfx Ahei Ikytewed Speed range: 20 – 9000 rpm Tool holder: SK 40 Number of tools: 2 x 36 EQUIPMENT/ACCESSORIES • Fully enclosed working area with roof; completely sealed workspace. The loading doors are designed for overhead crane loading when open. • Dual workspace lighting • Safety fence mounted on the machine • Coolant filtration system • Internal coolant supply through the spindles, 20 bar • Rinsing pistol • Chip conveyor • Centralized oil lubrication system • Oil extraction system • Electrical cabinet cooling • Direct measuring systems (all axes) • Wireless 3D measuring probe • Machine-foot elements • Documentation The machine offered here is highly robust, designed for serial milling and drilling operations, and can be inspected under power.

Būklė: naudotas, Gamybos metai: 2012, Funkcionalumas: ribota funkcionalumas, veikimo valandos: 43 100 h, X ašies eiga: 800 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 550 mm, valdiklių gamintojas: Heidenhain iTNC530, valdiklio modelis: 530, X ašies padavimo greitis: 60 m/min, Y ašies padavimo greitis: 60 m/min, padavimo greitis Z ašis: 60 m/min, greitasis eiga Z ašyje: 61 m/min, greitas poslinkis X ašimi: 61 m/min, greitas poslinkis Y ašis: 61 m/min,

Gamybos metai: 2017, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, FOM Industrie ARGO 70 3-Axis CNC Machining Center for drilling and milling operations on steel or aluminum profiles. TECHNICAL DETAILS X-axis Top Side Only: 6,780 mm X-axis Top Side + Heads: 6,630 mm Y- and Z-axis for machining top and rear sides: 545 mm x 295 mm Fpedpolu E Nasfx Ahwod Y- and Z-axis for machining on 3 profile sides: 440 mm x 295 mm Pneumatic rotation: 0°, 90°, 180° Spindle speed: max. 17,000 rpm Profile width: max. 545 mm Bar length: max. 6,780 mm Number of milling spindles for aluminum: 1 Tool magazine positions: 12 POSITIONING AND CLAMPING Clamping devices with controlled and independent positioning: 4 Number of pneumatic clamps: 4 Max. number of clamping units: 8 MACHINE DETAILS Main motor: 6.5 kW Total connected load: 8.3 kW X-axis speed: 100 m/min EQUIPMENT - Multiple workpiece processing - Tool clamping system - Pendulum operation - Minimum quantity lubrication system - Chip conveyor belt - Rigid tapping - Air cooling - Tool holder - Tool rack with 12 positions on the head - Operator terminal with PC - 23" monitor - 3D visualization for FomCam

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1791, MATEC 30HV/NC X = 2,000 mm Y = 825 mm Z = 800 mm / Horizontal Z = 675 mm / Vertical - 1-axis CNC swivel head Swivel radius 300 mm, swivel angle max. +/- 105 degrees Direct measuring system +/-3 selectable as continuous or settable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Electronic handwheel (portable) - Telephone diagnostics / remote maintenance - Tool magazine with 48 stations - Auxiliary tool magazine with 216 stations Fixed tool magazine for loading the internal tool changer of a machine tool. Including - Linear and rotary axes with drives - Controllers and sensors - Gripper for tool holder SK40 - Sheet steel housing - 6 tool levels for storing 216 tools with SK40 holders D=80 mm or D=160 mm with free spacing, of which 40 pcs. with L=430 mm 64 pcs. with L=260 mm 112 pcs. with L=160 mm Max. tool weight 10 kg - Tool loading and unloading via a tool hatch - Transfer to the machine with a double gripper - Tool data entry on the machine control panel, tool station selection on the auxiliary magazine panel - Option: Control panel for tool data entry on the auxiliary magazine - Surcharge for motor spindle 9,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar - Internal coolant supply 40 bar - Compressed air at external nozzles - Internal coolant compressed air through the tool - Rotoclear - Automatic safety doors - Rotary table HOWIMAT CNC 220.2/TMI-50 1-axis precision indexing table with direct drive Indexing accuracy deviation max. +/- 10 sec. Radial/planar runout deviation max. +/- 0.003 mm - 1-way rotary distributor for rotary table or counter bearing - Zero point clamping system integrated into the machine table, without clamping bolts and cover. - Tool breakage monitoring - Fully enclosed work area with roof - Bellows with steel lamellas - Direct measuring system X, Y, Z axis - Chip conveyor - Rinse gun - Centralized oil lubrication - Work area lighting Fpjdpjxg D Atefx Ahwed - Installation elements