Universalios apdirbimo staklės nuo 1000 mm X eiga pirkti naudotą (151)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2009, X ašies eiga: 1 350 mm, Y ašies eiga: 1 150 mm, Z ašies eigos atstumas: 700 mm, valdiklių gamintojas: HEIDENHAIN, valdiklio modelis: i TNC 530, bendras aukštis: 3 090 mm, stalo apkrova: 1 600 kg, bendras svoris: 12 600 kg, veleno greitis (maks.): 15 000 aps./min, A ašies pasukimo kampas (min.): −15 °, A ašies pasukimo kampas (maks.): 136 °, ašių skaičius: 5, Bendrieji duomenys Matmenys plotis: 2300 mm Matmenys gylis: 5100 mm Matmenys aukštis: 3090 mm Mašinos svoris: 12600 kg Valdymo blokas Gamintojas: HEIDENHAIN Modelis: i TNC 530 Pagrindinė pavara Veleno apsukų diapazonas: 15000 Veleno variklio galia: HSK-A 63 Ašių skaičius: 5 Judėjimas X ašies eiga: 1350 mm Y ašies eiga: 1150 mm Z ašies eiga: 700 mm A ašies eiga: 136° (-16 +120) Stalas Stalo apkrova: 1600 kg Klodpsx D I Nxefx Af Isl Papildoma įranga AP aušinimas per veleną Drožlių pašalinimas Įrankių kontrolė dvigubu lazeriu Radijo dažnio zondavimo daviklis Oras per veleną APS (Išplėstinė proceso sistema) ITC (Intelektuali terminė kontrolė) Šis 5 ašių MIKRON HPM 1350U pagamintas 2009 metais. Universalus apdirbimo centras, siūlantis pažangias galimybes įvairiems ir sudėtingiems apdirbimo darbams. Jei ieškote aukštos kokybės frezavimo galimybių, apsvarstykite mūsų siūlomą MIKRON HPM 1350U įrenginį. Susisiekite su mumis dėl išsamesnės informacijos. Pritaikymo sritys Frezavimas

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2014, Immediately Available Gantry-type Machine FS 480 • Total travel X = 4800 mm, ideal for flexible machining of large parts • Travel paths: X = 4,800 mm, Y = 1,500 mm, Z = 3,500 mm Klodpfx Afsxvlrbs Isl • iTNC 530 controller with wireless HR 550 FS handwheel, operator cabin on the gantry • 2-axis NC universal drilling and milling head, simultaneous and positioning operation per gantry • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for protecting guides and drives • BA 4 per gantry • Wireless probe RMP 60, manufacturer: Renishaw • Work area monitoring with network camera and monitor at the rear of the machine • Process monitoring ToolScope basic system • Additional control panel at the rear of the machine • Partial enclosure, consisting of work area and sheet metal door; rear with protective fence and clear view into the workspace • Incl. fixators • Cooling units • Incl. internal tool cooling (closed cooling circuit) with cooling unit • Short delivery time, immediately available, ---subject to prior sale--- Inspection possible by appointment Spindle hours: approx. 9,079 SPECIAL PRICE!!

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2005, veikimo valandos: 48 898 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 000 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 1 000 mm, valdiklių gamintojas: Heidenhain iTNC 530, ruošinio svoris (maks.): 2 000 kg, bendras aukštis: 3 400 mm, bendras ilgis: 6 000 mm, bendras plotis: 4 500 mm, sukimosi greitis (min.): 30 aps./min, bendras svoris: 15 800 kg, veleno greitis (min.): 18 000 aps./min, įrankių magazino lizdų skaičius: 40, Year of manufacture: 2005 CNC control: Heidenhain iTNC 530 Axes Travel X-axis [mm]: 1000 Travel Y-axis [mm]: 1000 Travel Z-axis [mm]: 1000 C-axis indexing [°]: 360° (0.001) A-axis indexing [°]: 130° B-axis indexing [°]: 0-190° Feed rates [m/min]: 60 Rapid traverse [m/min]: 60 NC milling/turning table: Number of pallets: 1 Pallet dimensions [mm]: Ø1100 x 900 Max. workpiece weight [kg]: 2000 Table speed [rpm]: 30 Spindle Max. spindle speed [rpm]: 18000 Cooling Coolant supply through spindle [bar]: 40 Tank capacity [L]: 980 High-pressure cooling [bar]: 40-80 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 40 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Infrared probe Rinsing pistol Blow air through spindle center selectable via M function Laser tool measurement for tool length and diameter Klsdpfoxur Sxox Af Iol 3D quickSET Prepared for internal cooling (40/80 bar) Paper band filter Machine operating time: Hours powered on: 144180 Spindle operating hours: 48898 Total power requirement [kVA]: 65 Basic machine: dimensions / weight Length [mm]: 6000 Width [mm]: 4500 Height [mm]: 3400 Weight [kg]: 15800

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, X ašies eiga: 2 600 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 700 mm, greitas poslinkis X ašimi: 40 000 m/min, greitas poslinkis Y ašis: 40 000 m/min, greitasis eiga Z ašyje: 40 000 m/min, stalo plotis: 750 mm, stalo ilgis: 2 900 mm, stalo apkrova: 2 150 kg, 5-Axis Machining Center DMG MORI - DMF 260-7 X-axis travel: 2600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm A-axis travel: 360,000° B-axis travel: -110 to +110° Table length: 2900 mm Table width: 750 mm Table load capacity: 2150 kg Table diameter Ø: 750 mm Feed rate X-axis: 40,000 mm/min Feed rate Y-axis: 40,000 mm/min Feed rate Z-axis: 40,000 mm/min Tool holder: 40 ISO/BT/MK Spindle power: 35 kW Spindle speed: 18,000 rpm Kljdpfoxuqv Aox Af Iel Tool changer: 30 positions Internal coolant supply (IKZ): 20 bar Number of controlled axes: 5 Chip conveyor: Yes Coolant unit: Yes Length: 8,400 mm Width: 3,423 mm Height: 2,620 mm Weight: 16,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Sąlyga: naudotas, Gamybos metai: 2012, X ašies eiga: 1 020 mm, Y ašies eiga: 610 mm, Z ašies eigos atstumas: 610 mm, bendras svoris: 7 000 kg,

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2014, Immediately available: Gantry-type machine FS 2100 • Total travel range X = 21,000 mm, ideal for flexible large-part machining • Travel ranges: X = 21,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control system with wireless handwheel HR 550 FS, operator’s cabin mounted on the gantry • 2-axis NC universal boring and milling head, full simultaneous and positioning operation for each gantry • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for guidance and drive protection • 4 work stations per gantry • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor at the rear of the unit • Process monitoring ToolScope base system • Additional control panel at the rear of the machine • Partial enclosure consisting of machining compartment and sheet metal door, rear with protective fence for direct view into workspace • Includes fixators • Cooling aggregates • Includes internal tool cooling (closed cooling circuit) with chiller • Short delivery time, available immediately — subject to prior sale — Kjdpfx Asxt En Djf Isll Viewing by appointment possible Spindle hours: approx. 9,079 SPECIAL PRICE!

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 000 mm, Y ašies eiga: 1 250 mm, Z ašies eigos atstumas: 2 500 mm, X ašies padavimo greitis: 20 m/min, Y ašies padavimo greitis: 10 m/min, padavimo greitis Z ašis: 10 m/min, sukimo momentas: 1 200 Nm, valdiklių gamintojas: HEIDENHAIN TNC 530, ruošinio skersmuo (maks.): 3 000 mm, ruošinio svoris (maks.): 60 000 kg, bendras aukštis: 5 560 mm, bendras ilgis: 11 550 mm, bendras plotis: 10 750 mm, stalo plotis: 3 000 mm, stalo aukštis: 800 mm, stalo ilgis: 3 000 mm, stalo apkrova: 60 000 kg, sukamosios stalo skersmuo: 3 000 mm, sukimosi greitis (min.): 10 aps./min, sukimosi greitis (maks.): 2 500 aps./min, bendras svoris: 87 000 kg, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, We offer a used milling and boring machine FUE 125 W/4, year 2011, equipped with a HEIDENHAIN iTNC 530 HSCI CNC control system with manual pulse generator HR410, HEIDENHAIN digital drives, standard configuration, metric execution, AC 3-phase 400V 50Hz mains connection. Specifications: - Longitudinal travel (X-axis): 4,000 mm - Cross travel (Y-axis): 1,250 mm - Spindle quill travel (W-axis): 800 mm, spindle diameter 130 mm - Vertical travel (Z-axis): 2,500 mm - Feed rate in X1: 20,000 mm/min - Feed rate in Y, Z1: 10,000 mm/min - Metric machine version: Yes - Headstock design: with retractable working spindle W + 3x automatic tool changer heads - Spindle taper: ISO 50 - Main drive power: 28 kW - Taper: ISO 50, DIN 69871 clamping system - Automatic tool head IPS with automatic spindle positioning to H/V position, 2,500 rpm / 1,200 Nm - Automatic tool head IZN 1 for turning, clamping: CAPTO 6 - Automatic tool head IZN 2 for turning, clamping: CAPTO 6 - Control: HEIDENHAIN iTNC 530 HSCI - Manual pulse generator: cabled HEIDENHAIN HR410 - Cooling unit for temperature stabilization of the spindle drive heads - High-pressure internal tool cooling: 20 bar / 30 l.min-1 / 180 l - External low-pressure tool cooling: 5 bar / 60 l.min-1 / 1,200 l Clamping area in front of the machine: Optional Currently equipped with a rotary traversing table KES with carousel (turning) functionality (optional variations available, e.g. plate, table) - Table size: 3,000 x 3,000 mm, V (Y) axis travel = 1,500 mm - Max. load capacity: 60,000 kg (hydrostatic) Kodpfjxp U U Sex Af Ijll - Table speed range: 1–80 rpm - T-slot size (base clamping plate): 28 H11, central 28 H8 - Slot spacing and number: 200 mm, 15 slots - Central locating hole: 100 H7 - Rotary axis drives MASTER-SLAVE: 2× SIEMENS motor - Additional carousel plate, diameter 3,000 mm, 8× star-shaped slots Please contact us for further details or to arrange a viewing.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1999, veikimo valandos: 23 576 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 10980001683, X ašies eiga: 1 200 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 700 mm, valdiklio modelis: Heidenhain, ruošinio ilgis (maks.): 300 mm, ruošinio plotis (maks.): 160 mm, sukimosi greitis (maks.): 18 000 aps./min, bendras svoris: 13 000 kg, veleno greitis (min.): 20 aps./min, ašies skaičius: 1, įrankių magazino lizdų skaičius: 60, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, For sale: DMG 125 P 5-axis machine Simultaneous operation 60 tool stations; tools are included in the total price Ksdpfewqpnlsx Af Ioll Inspection possible at any time The machine was in operation until recently and is fully functional.

Sąlyga: naudotas, Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 000 mm, Y ašies eiga: 1 400 mm, Z ašies eigos atstumas: 1 000 mm, greitas poslinkis X ašimi: 10 m/min, greitas poslinkis Y ašis: 10 m/min, greitasis eiga Z ašyje: 15 m/min, X ašies padavimo greitis: 5 m/min, Y ašies padavimo greitis: 5 m/min, padavimo greitis Z ašis: 5 m/min, sukimo momentas: 1 200 Nm, valdiklių gamintojas: SIEMENS SINUMERIK 840D, ruošinio svoris (maks.): 18 000 kg, bendras aukštis: 4 950 mm, bendras ilgis: 10 270 mm, bendras plotis: 5 640 mm, stalo plotis: 1 000 mm, stalo aukštis: 800 mm, stalo ilgis: 6 000 mm, stalo apkrova: 18 000 kg, sukimosi greitis (min.): 16 aps./min, sukimosi greitis (maks.): 3 200 aps./min, bendras svoris: 21 000 kg, veleno greitis (maks.): 3 200 aps./min, ašies variklio galia: 22 000 W, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, FFQ 100W-A6(A8) CNC - TOS KUŘIM Machining centre, table length 6m (8m) Control system: Siemens 840 C Availability: according to selected refurbishment level Warranty: according to selected refurbishment level Available as used, after partial overhaul, or after complete overhaul including modernization. FFQ 100W-A6(A8) CNC – Technical specifications: Basic machine data: Manufacturer: TOS Kuřim Overall length: 10,270 mm Overall width: 5,640 mm Overall height: 4,950 mm Total weight: 21,000 kg Total power requirement: 40 kVA Working range: Longitudinal travel X-axis: 4,000 mm (6,000 mm) Cross travel Z-axis: 1,000 mm Kedpfjxp Iz Ssx Af Iell Vertical travel Y-axis: 1,400 mm Horizontal spindle head with extending quill: Taper: ČSN 22 0433 / ISO 50 Max. power: 22 kW Spindle speed range: 16 – 3,200 rpm Number of speed steps: stepless Max. torque: 1,200 Nm Quill diameter: 170 mm Quill stroke: 400 mm Quill feed range: 1 – 2,000 mm/min Quill rapid feed: 4,000 mm/min Max. quill feed force: 10,000 N Spindle head (IPS head): Taper: ČSN 22 0433 / ISO 50 Max. power: 22 kW Spindle speed range: 16 – 3,200 rpm Number of speed steps: stepless Max. torque: 1,200 Nm Milling H-V, spindle can be automatically swiveled to vertical or horizontal position Feed range X – Y / Z: Number of steps / range: stepless / 1 – 5,000 mm/min Rapid traverse Y – Z / X: 10,000 / 15,000 mm/min Table: Table area: 1,000 x 6,000 mm (8,000 mm) Max. load: 3,000 kg/m2 Tool magazine: Number of positions: 40 Control system: SIEMENS 840 C Details on request.

Sąlyga: naudotas, Gamybos metai: 2005, x-axis travel 2000 (775 + 600) mm y-axis travel 620 mm z-axis travel 520 mm Control Heidenhain iTNC 530 Spindle speed range main spindle 12,000 rpm Main spindle drive power 18 kW Clamping table surface 1,200 x 600 mm Rotary table diameter Ø 500 mm tilt angle +15/-95° rotation 0-360° max. table load 1000/350 kg Tool holder SK 40 Number of tool stations 30 positions Internal coolant supply 20 bar Rapid traverse (X / Y / Z) 30 m/min Dimensions L x W x H 5.0 x 2.5 x 3.3 m Machine weight approx. 11 t Universal CNC machining center with 5 axes and fixed table in pendulum operation, overhauled for €60,000. - NC rotary/swivel table in the right working area - Fixed table in the left working area - 4th axis on the fixed table, 165 mm center height - Internal coolant supply - Dual cartridge filter - Chip conveyor - Partition for pendulum machining - External handwheel - KinematicsOpts - 3D probe IR - Oil mist extraction - Motorized "rolling roof" above the machine - 2022/2023 overhaul for €60,000 All guideways and ball screws replaced - Pendulum mode Kodpfjxbh D Dex Af Ioll - 1st commissioning 2006 - Replacement spindle installed in 2016 at approx. 21,000 spindle hours.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2014, Immediately available travelling column machine FS 1200 • Total travel X = 12,000 mm, ideal for flexible large-scale machining • Travel distances: X = 12,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control with wireless handheld unit HR 550 FS, operator cabin on the travelling column • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air supply up to 6 bar • Dust protection packages for protecting the guides and drives • BA 4 per travelling column • Wireless measuring probe RMP 60, manufacturer: Renishaw • Work area monitoring with network camera and monitor at the rear of the system • Process monitoring ToolScope basic system • Additional control panel at the rear of the system • Partial enclosure consisting of machining area and steel door, rear side with protective fence offering clear view of the machining area • Incl. mounting feet • Cooling units Klodpexmr Uqjfx Af Iol • Incl. internal tool cooling (closed cooling circuit) with chiller • Short delivery time, immediately available — subject to prior sale — Viewing by appointment possible Spindle hours: approx. 9,079 SPECIAL PRICE!

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 000 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 900 mm, greitas poslinkis X ašimi: 10 m/min, greitas poslinkis Y ašis: 10 m/min, greitasis eiga Z ašyje: 10 m/min, sukimo momentas: 1 200 Nm, valdiklių gamintojas: Heidenhain iTNC 426, ruošinio svoris (maks.): 9 000 kg, bendras aukštis: 3 320 mm, bendras ilgis: 9 660 mm, bendras plotis: 4 918 mm, veleno greitis (min.): 11 aps./min, veleno greitis (maks.): 2 500 aps./min, The machine is currently disassembled and undergoing repair to the following extent: - Complete disassembly and cleaning - Inspection of all components - New Tribotec lubrication unit - Overhaul of the independent balancing circuit of the console - Milling head "O" – complete overhaul including replacement of gears - Replacement of gearbox bearings - Replacement of belts - Repair of ball screws and their bearings - Resealing of hydraulic circuits throughout the machine and replacement of solenoid valves - Addition of automatic lubrication for the gears in the milling head - Resealing of all hydraulic cylinders and modernization of seals - Overhaul of the hydraulic unit - Overhaul of Indramat feed motors and spindle motor - Repair and adjustment of Indramat drives - Refurbishment of the electrical cabinet with control elements - Replacement and modernization of limit switches throughout the machine - Repair or replacement of cabling for the Heidenhain system and TNC 426 - Refurbishment of the control panel - Overhaul of the Heidenhain control system and TNC 426, including keyboard and display unit - The machine will be fully functional with geometrical accuracy certified by a protocol - New coating of the machine in RAL 5005 and RAL 9010 colour scheme Technical Data of the Machine Maximum spindle torque: 1200 Nm Maximum feed force in X, Y, Z axes: 20,000 N Maximum workpiece weight: 9,000 kg Table surface: 1,000 x 4,000 mm Number of T-slots / pitch: 7 / 140 mm T-slot width: 24H7 mm Ksdpfx Afsxnkkas Ioll Table height from base: 900 mm Longitudinal travel "X": 4,000 mm Cross travel "Y": 1,000 mm Vertical travel "Z": 900 mm Minimum distance from horizontal spindle axis to table clamping surface: 150 mm Maximum distance from horizontal spindle axis to table clamping surface: 1,500 mm Minimum distance from vertical spindle nose to table clamping surface: 130 mm Maximum distance from vertical spindle nose to table clamping surface: 1,030 mm Distance from horizontal spindle nose to inside edge of table: 80 mm Distance from vertical spindle axis to inside edge of table: 100 mm Spindle taper: ISO 50 Clamping force of drawbar: 16,100 N Horizontal spindle swiveling - both directions: 180° Vertical spindle swiveling - both directions: 180° Spindle head positioning: adjustable in 2.5° increments Usable main drive motor power: 22 kW Spindle speed range: 11 ÷ 2,500 rpm Number of speed steps: stepless Feed rate range: 1 ÷ 5,000 mm/min Rapid traverse in Y, Z axes: 10 m/min Rapid traverse in X axis: 10 m/min Machine available for delivery at the end of 2025.

Sąlyga: reikia remonto (naudotas), Gamybos metai: 2002, veikimo valandos: 54 981 h, Funkcionalumas: neveikiantis, mašinos/transporto priemonės numeris: 1114 000273 3, X ašies eiga: 1 080 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 30 m/min, greitasis eiga Z ašyje: 30 m/min, X ašies padavimo greitis: 15 m/min, Y ašies padavimo greitis: 15 m/min, padavimo greitis Z ašis: 15 m/min, valdiklių gamintojas: Haidenhain, valdiklio modelis: HEIDENHAIN TNC 530, bendras aukštis: 2 500 mm, bendras ilgis: 6 200 mm, bendras plotis: 3 802 mm, stalo plotis: 795 mm, stalo ilgis: 1 500 mm, stalo apkrova: 900 kg, bendras svoris: 9 500 kg, veleno veikimo valandos: 14 170 h, veleno nosis: SK40, įrankių magazino lizdų skaičius: 32, įrankio svoris: 8 000 g, Įranga: dokumentacija / vadovas, drožlių transporteris, Technical Details Machine: DMG DMU 100T Year of manufacture: 2002 Control system: Heidenhain TNC 530 with DMG-specific MillPlus IT user interface Spindle taper: SK40 Operating hours: 54,981 h Travel distances: X-axis: 1,080 mm Y-axis: 710 mm Z-axis: 710 mm Weight: approx. 9,500 kg Additional equipment: - NC rotary table (Nikken) - Large NC rotary table - Tailstock - Electronic handwheel Inspection An inspection under power is possible by appointment at any time. Condition: Used condition corresponding to age and previous usage Known defects: - Ball screw of the X-axis worn / overhaul required - Y-axis probably has a cable or motor defect Repairs carried out: 2017 – Retrofit kit for handwheel 2022 – Replacement of chip conveyor auger 2024 – New cylinder/ linear guide for tool magazine 2024 – New display Further defects cannot be ruled out. Important Notice / Disclaimer The machine is expressly sold as defective, without any warranty, guarantee, or liability for material defects whatsoever. Kedpfx Ajxxamxof Isll All technical details have been provided to the best of our knowledge but are non-binding. No liability is accepted for completeness, correctness, or accuracy of the information provided. The sale is as-inspected and any subsequent negotiation is excluded.

Sąlyga: geras (naudotas), Gamybos metai: 2000, X ašies eiga: 1 200 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 500 mm, Įranga: drožlių transporteris, Excellent overall condition. Used by a plastics mold manufacturer, primarily for engraving work. Low cutting forces, low machine stress. Travel ranges: X = 1200 mm, Y = 800 mm, Z = 500 mm Spindle speed: 0 – 8,000 rpm / Main spindle drive power: 11 kW Feed rate: 0 – 30 m/min / Table dimensions: 1320 x 800 mm Maximum table load: 2,000 kg / 20-position automatic tool changer / Maximum tool diameter: 63 mm / Tool length: 200 mm / Tool holder: SK 40 Kljdoxxkllepfx Af Isl Heidenhain 3D measuring probe, type TS 220 Coolant system / Chip conveyor / Extraction unit (optional) / Full enclosure Heidenhain CNC control, type TNC 426 PB digital / Heidenhain HR 410 electronic handwheel

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 000 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 800 mm, Įranga: 4 viename kaušas, Įrenginys yra labai geros techninės būklės, apžiūra su įjungta įranga galima iš anksto susitarus. Drožlių transporteris, aukšto slėgio aušinimas, CNC valdymo sistema Sinumerik 840D SL. Klsdpfjxcu Ewsx Af Ijl

Sąlyga: naujas, Gamybos metai: 2023, TECHNISCHE DATEN SINO V10-B Verfahrweg X-Achse: 1.000 mm Ksdpfxjiyyype Af Ijll Verfahrweg Y-Achse: 620 mm Verfahrweg Z-Achse: 630 mm Abstand Spindelnase zu Tisch: 120 ~ 750 mm T-Nuten: 5 x 18 mm T-Nutenabstand: 100 mm Arbeitsfläche Tisch: 1.200 x 600 mm Maximale Tischbelastung: 800 kg Spindelaufnahme: BT 40 Hauptspindelmotorleistung (30 min./Dauer): 15/11 kW Hauptspindelmotor-Drehmoment S1 – 52,5 Nm / S2 – 95,5 Nm / S3 – 118 Nm Hauptspindelantrieb: Direktantrieb Maximale Spindeldrehzahl: 12.000 min⁻¹ (U/min) ACHSENSPEZIFIKATION X, Y, Z Eilgang X/Y-Achse: 36 m/min Eilgang Z-Achse: 32 m/min Max. Vorschub X/Y/Z-Achsen: 10.000 mm/min Motorleistung X/Y-Achse (Drehmoment): 3 kW (20 Nm) Motorleistung Z-Achse (Drehmoment): 3 kW (36 Nm) WERKZEUGWECHSLER (ATC) Werkzeugmagazin-Typ: mit Greiferarm Magazinkapazität: 24 Werkzeuge Werkzeugaufnahme: BT 40 Werkzeugwechselzeit: 2,5 s GENAUIGKEIT Positioniergenauigkeit X/Y/Z: ± 0,008 mm Wiederholgenauigkeit X/Y/Z: ± 0,005 mm MASCHINENABMESSUNGEN Länge x Breite: 2.850 x 2.450 mm Höhe: 2.850 mm Gewicht: 6.800 kg IM PREIS ENTHALTENES ZUBEHÖR Fanuc 0i-MF Steuerung mit 10,4" Farb-LCD Hauptspindel mit Direktantrieb, Motor 11/7,5 kW, max. 12.000 U/min 3 Achsen simultan gesteuert Linearführungen mit Rollen in X, Y, Z, 45 mm Werkzeugmagazin mit Arm, 24 Plätze Kühlereinheit mit Tank Ölspindelkühlung Spindel-Luftblas-System Luftgebläse System zur Ölabscheidung aus der Kühlschmierstoff (Ölskimmer) Späneförderer mit Kette Geschlossener Schaltschrank mit Klimaanlage Schnittstellen für Programme/Daten: RS 232, CF-Karte, USB Automatische Abschaltung M30 Transformator Zentrale automatische Schmierung Gewindebohren mit fester Spindel (Rigid Tapping) Innenraum LED-Arbeitsleuchte x2 LED-Signalleuchte, 3-farbig MPG (manuelles Handrad) Fernbedienung mit Kabel Nivellierschrauben und Grundplatten Werkzeugkasten inkl. Werkzeuge Betriebsanleitung sowie Ersatzteilliste Teleskopschutz für alle 3 Achsen Vollständig geschlossener Arbeitsraum mit selbstverriegelnden Türen CE-Kennzeichnung 2 Jahre Garantie auf Steuerung 1 Jahr Garantie auf Maschine Kostenlose Lieferung, frei Lkw-Ausstellung CNC Top Ten bv Denekamp Niederlande

Sąlyga: labai geros būklės (naudotas), 5-axis machining centre with swivelling milling head, pallet station, tool calibration, thermal compensation, work area extraction, and much more. Year of manufacture: 2016 Spindle hours: approx. 1,500 h (after spindle replacement at the beginning of 2025) Control system: - Heidenhain iTNC 530 HSCI - Heidenhain DCM collision monitoring - Heidenhain HR 410 electronic handwheel - Swivelling control panel with 19" monitor - Teleservice via LAN/WLAN Traverse range: - X-axis: 1,000 mm, Y-axis: 1,100 mm, Z-axis: 810 mm - NC rotary table D 1,000 x 800 mm, swing diameter 1,350 mm Milling head: - Automatic horizontal/vertical swivel head - Full-featured stepless NC axis from -1° to +90° - Air blast through spindle - External cooling via nozzle ring Drive capacity 38 kW (100% duty cycle) Spindle speed 16,000 rpm Torque 135 Nm at 40% duty cycle Spindle taper HSK 63-A Media supply: - Internal coolant supply 50 bar – capacity 28 l/min - Paper band filter with additional fine filter - Programmable pressure regulation for individual tools during operation Tool changer: - Magazine shelf with 73 stations (expandable with additional racks) - Swivelling dialog control panel - Drawer for inserting and removing tools from the magazine racks Tool measurement: - 3D wireless probe m&h 20.00-Multi, software adaption for HSK 63-A - Includes Kinematics-Opt, compatible with iTNC control, and calibration sphere on magnetic base Pallet changer: - 2-station pallet unit, pallet diameter 1,000 x 800 mm, hole grid 100 mm x 100 mm, hardened drill bushes D 16 mm - Rotary table unit incl. zero-point clamping system, loading station accessible for crane. - Pallet changing unit protected by enclosure. Special equipment: Klsdpjxhg Diofx Af Ijl - Micro-Epsilon for detection and dynamic compensation of thermally induced spindle growth Chip conveyor: - Slat band conveyor longitudinal to the machine bed - Chip discharge height 1,100 mm Machine enclosure: - Fully enclosed cabin with large angular door for crane loading and a quick-access door. - Easy removal of chips from the work area. Extraction unit: - Oil and emulsion mist extraction, mechanical air filter, suction capacity 1,800 m³/h Rotating viewing window: - Inspection window integrated into the work area door Camera in the work area: - Monitor and keyboard mounted on the control panel. Enables monitoring of rear-side machining. Machine data: - Footprint (without service areas!) LxWxH approx. 4,791 mm x 4,100 mm x 4,791 mm (incl. extraction system) - Machine weight approx. 19,700 kg - Total weight with full equipment, plus max. workpiece load, all tools loaded and operating fluids: approx. 27,730 kg - Connected load 50 kVA, 400V, 50/60 Hz This machining centre, featuring exceptional and application-oriented equipment, is in excellent condition. It operates with the characteristic “Swiss precision”. There is no maintenance or repair backlog for the machine – quite the opposite. With an almost new milling spindle, the REIDEN RX 10 5X is set up very well for long-term operation. Technical changes and errors excepted.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 7 470 mm, Y ašies eiga: 590 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 24 000 aps./min, įrankių magazino lizdų skaičius: 15, Įranga: dokumentacija / vadovas, drožlių transporteris, No reserve price – guaranteed sale to the highest bidder! Original purchase price was approx. EUR 200,000 TECHNICAL DETAILS X-axis travel: 7,470 mm Y-axis travel: 590 mm Z-axis travel: 400 mm C-axis: 360° A-axis: available Number of axes: 5 Software: ITALCAM 3D Electrospindle power: 12 kW (0/24,000 rpm) Maximum torque: 9.5 Nm at 12,000 rpm Spindle speed: 24,000 rpm Spindle taper: HSK 63 F Number of spindles: 1 Number of tool magazine slots: 15 Spindle cooling: liquid Work areas: 2 Sides machinable: 5 Kjdpfx Ajwqfi Ejf Isll Standard clamping devices: 12, individually positionable Tool magazine: 15-position tool changer mounted on carriage Clamping force: 130 kg per clamping device Lubrication nozzles: 1 on the electrospindle Tank capacity: 2.2 litres Carriage lubrication: automatic MACHINE DETAILS Dimensions (L x W x H): 9,800 x 3,100 x 3,000 mm Transport dimensions (L x W x H): 9,500 x 2,150 x 2,500 mm Weight: 3,500 kg Rated power: 18 kW Power consumption: 32 A Voltage: 400 V three-phase with transformer Frequency: 50/60 Hz Air pressure: 7 bar Precision: 0.1 mm Operating temperature: 10 to 35 °C Humidity: 75 % Standard colours: RAL 7015 Chip removal system: chip conveyor belt Machine safety: safety light barriers on three sides of the machine Control panel: 17-inch LCD monitor EQUIPMENT - Documentation/manual - Stepless spindle speed adjustment - Chip conveyor - USB port on control panel

Sąlyga: geras (naudotas), Gamybos metai: 2019, veikimo valandos: 1 994 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 000 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 1 000 mm, valdiklių gamintojas: Fanuc, valdiklio modelis: Fanuc 31i-B, veleno greitis (maks.): 10 000 aps./min, ašies skaičius: 1, tvirtinimo skersmuo: 100 mm, Operating hours: 7,194 Effective operating time: 1,994 Year of manufacture: 2019 Control: Fanuc 31i-B Spindle: PC 100i (10,000 rpm) Tool clamping system: HSK 100 Magazine / stations (options): chain/50 Kodpfevvmnusx Af Iell Rotary table: 360.000° x 0.001° Coolant system: KNOLL, KF 400, high-pressure internal coolant 70 bar Working area XYZ (mm): 1000 / 1000 / 1000 Pallet size (mm): 630 x 630 Workpiece clamping: hydraulic, 80 bar Additional options, special features: HELLER planing device; receiver for wireless probing system (RENISHAW); coolant temperature controller; predictive collision avoidance; interface for mist extraction (emulsion operation); 3-color LED status lamp; work area rinse; scraper-type chip conveyor for wet machining; rapid drill breakage detection (SBBK); MSK; thermal expansion compensation; feed force display; automatic setup and removal sequence; increased tool weight up to 35kg magazine; tool coding on shank. As response emails via Machineseeker often end up in the spam folder, we kindly ask you to check this folder regularly or contact us directly.

Sąlyga: naudotas, Gamybos metai: 2003, x eiga 2 000 mm y eiga 1 000 mm z eiga 1 200 mm Valdymas TNC 430 Heidenhain Pagrindinio veleno apsukų diapazonas 20 - 5 000 min⁻¹ Pavarų laipsniai 2 Pagrindinio veleno variklio galia 30 (100%) / 45 (40%) kW Sukimo momentas 1 050 / 1 580 Nm Įrankio tvirtinimas HSK 100 B ašis pasukama: +/- 180° B ašies padala: 0,001° Stalo darbinis paviršius 1 000 x 2 000 mm Maks. stalo apkrova 4 000 kg Tarpas tarp griovelių 100 mm T formos grioveliai 18 H7 T formos griovelių kiekis 10 Įrankių vietų skaičius 40 vietų Įrankio tvirtinimas HSK 100 Įrankio keitimo laikas 10 sek. Maks. įrankio skersmuo 250 mm Maks. įrankio ilgis 400 mm Maks. įrankio svoris 20 kg Poslinkio greitis X,Y,Z: 0 - 20 000 mm/min Poslinkio greitis B: 10 1/min X,Z galia: 15,7 / Y: 8,5 kW B galia: 2,5 kW Poslinkio jėga 22 500 N Staklių svoris apie 23 t Reikalinga vieta apie 8,0 x 8,0 x 3,3 m 4 ašių apdirbimo centras – universalus REIDEN - BFR 22 - įsk. 2x įrankių spintos - įsk. 3x ištraukiamos spintos Kledpfx Afsxmag Ij Isl - įsk. 1x darbo stalas - įsk. Ringler drožlių siurblys

Sąlyga: geras (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 000 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 800 mm, valdiklių gamintojas: Bosch Rexroth, valdiklio modelis: IndraMotion 10, sukamosios stalo skersmuo: 800 mm, įrankių magazino lizdų skaičius: 40, įėjimo įtampa: 400 V, įvesties srovės tipas: Oro kondicionierius, trumpas kūginis tvirtinimas: 63 mm, B ašies pasukimo kampas (maks.): 105 °, C ašies pasukimo kampas (maks.): 360 °, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, 5 ašių portalinis staklynas su 3 000 mm eiga X ašyje, 600 mm – Y ašyje ir 800 mm – Z ašyje. B ašis pasukama ±105°, C ašis sukama 360°. Kedpfx Afexn Ikde Iell Tekinimo paketas: leidžia itin tiksliai tekinimui kartu su standartiniu frezavimu, palengvina tekinimą ir frezavimą vienu užspaudimu. Rotacinio stalo greitis – 500 aps./min. Schunk Rota S Plus 800 tvirtinimo griebtuvas. Darbo valandų skaitiklis neveikia.

Sąlyga: naudotas, Gamybos metai: 2010, X eiga 2000 mm Y eiga 2000 mm Z eiga 2000 mm Valdymas SIN840D B ašis 360 x 0,001° A ašis -90 – +90 x 0,001° X/Y/Z ašių padavimo greitis 1 – 30000 mm/min Greitoji eiga X/Y/Z 30,00 m/min B ašies padavimo greitis °/min A ašies padavimo greitis °/min Pagrindinio veleno apsisukimai, 1 pavara: 1 – 1096 aps./min Kljdpfx Afexvdq Ae Iol Pagrindinio veleno apsisukimai, 2 pavara: 1096 – 6000 aps./min Variklio galia 45,00 kW Įrankio tvirtinimas HSK-A 100 Didžiausias veleno sukimo momentas 1250 Nm Įrankių sandėlis: 207 + 10 Maks. įrankio ilgis 700 mm Įrankio skersmuo 300 mm Padėklų dydis 2x 1000x1000 mm Ruoinio svoris 5000 kg T formos grioveliai pagal DIN650 T formos griovelių atstumas 100 mm T formos griovelių plotis 22 mm T formos griovelių skaičius 1 + 8 Bendras energijos poreikis 100,00 kW Apytiksliai matmenys 13,00 x 8,00 x H4,50 m 5-ašių sinchroninis apdirbimo centras su SIEMENS SIN840D valdikliu, matavimo jutikliu, drožlių transporteriu, aušinimo sistema, aušinimo skystis per veleną, padėklai su 5-jų medijų jungtimis ir hidrauliniu užspaudimu, ištraukimo sistema, pasukamas A ašies velenas 0–90°, NC sukimo stalas B ašis.

Sąlyga: naudotas, Gamybos metai: 2005, x-axis travel: 1,000 mm y-axis travel: 1,000 mm z-axis travel: 1,000 mm Control: Siemens 840 D Spindle speed range: 20 - 18,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 121 Nm Tool interface: HSK-A63 Tiltable B-axis: -30° / +180° Swivel time: 1.2 s Number of pallets: 2 Pallet size: 1,000 x 800 mm Max. workpiece weight: 1,500 kg Rotatable C-axis: 360° Number of tool stations: 180 positions Tool interface: HSK-A63 Total power requirement: 78 kVA Machine weight: approx. 27.0 t Kledpfx Aewf Rgfsf Iel Space requirement: approx. 8.0 x 7.0 x 3.4 m 5-axis CNC universal machining center DECKEL MAHO - DMC 100 U duoBLOCK - Swivel milling head (B-axis) - NC rotary table (C-axis) - Pallet changer - 180-position tool magazine - WITHOUT zero-point clamping system - WITHOUT RINGLER extraction unit - WITHOUT tools

Sąlyga: naudotas, Gamybos metai: 2013, X travel: 1,520 mm Y travel: 520 mm Z travel: 420 mm Control: Siemens 840 Dsl Operate Max. spindle speed: 12,000 rpm Main spindle drive power: 19 kW Torque: 121 Nm Tool holder: SK 40 Table diameter: 500 mm Rotary axis C: 360° Swivel axis B: -90° / +110° Max. table load: 500 kg Table rotation speed: 25 rpm Resolution: 0.001° Clamping surface: 920 x 540 mm Number of tool stations: 54 positions Max. tool weight: 7 kg Max. tool length: 290 mm Max. tool diameter: 130 mm Kodpfx Afjvmr R Ne Isll Max. tool diameter with adjacent pocket empty: 130 mm Machine weight approx.: 10.5 t Space requirement approx.: 4.4 x 3.5 x 3.1 m 5-axis universal machining center SPINNER - U5 1520 - NC rotary/swivel table - 5-axis simultaneous machining - Spindle hours: approx. 13,282 h - Includes zero-point clamping system - New spindle installed (2020) - WITHOUT tools - WITHOUT vices

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 2010, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 1159, X ašies eiga: 4 000 mm, Y ašies eiga: 1 200 mm, Z ašies eigos atstumas: 1 700 mm, įrankių magazino lizdų skaičius: 40, A ašies pasukimo kampas (min.): −105 °, A ašies pasukimo kampas (maks.): 105 °, Įranga: dokumentacija / vadovas, No reserve price – guaranteed sale to the highest bidder! Bidding entails an obligation for timely collection of the machine between 28.07.2025 and 31.07.2025. Machine includes approx. 90 tool holders TECHNICAL DETAILS Travel X-axis: 4,000 mm Travel Y-axis: 1,200 mm Travel Z-axis (horizontal): 1,700 mm Travel Z-axis (vertical): 1,690 mm Kedpowu E Ezefx Af Ijll Rapid traverse: 30 m/min Swivel Head and Axis System Swivel head: Two-axis universal swivel head, infinitely adjustable in both axes Clamping: Axes hydraulically lockable via M-function A-axis Working range: ±180° Torque without clamping: max. 1,750 Nm Torque with clamping: max. 2,500 Nm Direct position measuring system: ±3" B-axis Working range: ±180° Torque without clamping: max. 4,200 Nm Torque with clamping: max. 12,000 Nm Direct position measuring system: ±5" Spindle Speed range: 20 – 8,000 rpm Power at 40/100 % duty cycle: 33/24 kW Torque at 40/100 % duty cycle: 382/278 Nm Tool Magazine Number of tool stations: 40 Tool holders included: approx. 50 HSK 100 + 40 HSK 100 in the magazine Maximum tool weight: 20 kg Tool length: 460 mm Maximum tool diameter with adjacent tools: 125 mm Maximum tool diameter without adjacent tools: 200 mm Tool change time: approx. 8.5 s Chip-to-chip time: approx. 9.5 s CNC Control Control unit: Siemens SINUMERIK 840 D-POWERLINE Rotary Table Type: NC rotary table with direct drive Faceplate diameter: 1,900 mm Max. horizontal load (turning/milling): 5,000 kg Radial run-out accuracy: 0.02 mm Axial run-out accuracy: 0.015 mm over 1,000 mm Nominal speed: 180 rpm at 100 % duty cycle Total clamping area: approx. 4,300 × 1,200 mm (not including full diameter of the NC rotary table) T-slots: 11 × 18H7 MACHINE DETAILS Installation dimensions: 8,000 x 6,000 x 5,000 mm Weight: 45 t Transport width: approx. 3,450 mm Transport length: approx. 6,900 mm Loading height: approx. 4,015 mm EQUIPMENT - Two-axis universal swivel head with stepless adjustment - Direct position measuring systems on A/B axes - NC rotary table with direct drive - Siemens SINUMERIK 840 D-POWERLINE CNC control - Tool magazine with 40 stations - Approx. 90 HSK 100 tool holders - Complete documentation The machine is suitable for transport on trucks up to 3,000 mm width.