Kombinuota obliavimo ir storio obliavimo staklė pirkti naudotą (130)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Planer-thicknesser machine Holzkraft FS 30 Classic Tersa Equipped with Tersa cutter block and quick-change planer blade system The Tersa planer blade system enables blade changes in seconds and ensures exceptionally quiet operation. Gbsdpfx Aebuldyjfden Helically-toothed steel feed roller for continuous and consistent wood feed Extra-long planer tables Large planer fence remains in place when opening the planer tables Planer tables open towards the rear High machine weight Powerful industrial motor Robust steel and cast iron construction Total table length: 1510 mm Infeed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. cutting depth: 4 mm Thickness table dimensions: 565 x 300 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min Cutter block diameter / planer knives: 72 mm / 3 pcs Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 HP) Extraction port diameter: 2 x 120 mm Scope of delivery: Tersa cutter block, anodized planer fence Available ex-stock Bitburg - immediately available -

Būklė: labai geros būklės (naudotas), Gamybos metai: 1984, Darbo plotis 600 mm Gbjdpfxey Db Rxs Afdsn Obliavimo aukštis 200 mm Obliavimo stalo ilgis 2100 mm Obliavimo peilių skaičius 4 vnt. Padavimo greitis 7 + 14 m/min. Mašinos svoris apie 1100 kg - Aigner pagalbinis atrama obliavimo atramoje - Mašinos rėmas iš ketaus - Storis stalas vedamas 4 kreiptuvais - Reguliuojamas rankiniu ratu - Tilto tipo apsauga Vieta: iš sandėlio 54634 Bitburg - iš karto prieinama -

Gamybos metai: 2022, būklė: naujas, XSD310 400 Volt Weight: 280 kg Surface planer Gsdpjdkl Sqjfx Afdobn Planing width: 310 mm Total length of planer tables: 1400 mm Cutterblock diameter: 70 mm Tersa cutterblock RPM: 5,500 Planer fence dimensions: 1300 x 150 mm Planer fence tilt adjustment: 90 - 45 degrees Maximum cutting depth: 4 mm Motor power: 4 HP Thickness planer Thickness table dimensions: 430 x 310 mm Thickness capacity: 230 mm Feed roller diameter: 30 mm Feed speed: 6 m/min Accessories: Tersa cutterblock Thickness table adjustment via handwheel with mechanical display Location: Available from stock 54634 Bitburg The machine is on display at our premises and is available immediately.

Būklė: naujas, Gamybos metai: 2025, CASADEI PFS 520 - Surface & Thickness Planer with 520 mm Planing Width and Motorized Thickness Table Adjustment Robust Cast Iron and Steel Construction Large, ribbed surfacing tables made from annealed cast iron to prevent warping Smooth, quiet operation due to heavy machine weight Four feed speeds Motorized thickness table adjustment with two speeds and digital display Segmented pressure bars at the infeed Precision-mounted 4-knife cutterblock Helical steel feed roller for particularly uniform and gentle wood infeed Outfeed roller with rubber coating Large adjustable fence, tilting from 90° to 45°, easily readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa Cutterblock Quick knife change in seconds On machine start, the knives are automatically tensioned by centrifugal force – self-locking The knife projection is automatically set without adjustments or screws The surfacing table is adjusted via a robust and precise parallelogram system, ensuring consistent distance between the table lips and cutterblock in all positions The sturdy aluminum fence is anodized as standard, easily adjustable, and provides a large support surface The adjustable tilt from 90° to 45° is easily readable from the workstation Standard with auxiliary fence for safe planing of narrow workpieces Image shows optional equipment The extraction port is always in the same position for both surfacing and thickness planing Thus, no extra hose or cumbersome switching or routing around the machine is required. Technical Data Total length of surfacing tables 2300 mm Infeed table length 1180 mm Planing width 520 mm Fence dimensions 1200 x 190 mm Gbjdebxz S Hspfx Afdjn Fence tilt range 90 - 45° Min./max. planing height 3/250 mm Cutterblock diameter/number of knives 100 mm / 4 pcs Feed speeds 5/8/12/18 m/min Cutterblock speed 5000 rpm Motor power 400 V / 50 Hz / S6 Extraction port diameter 120 mm Weight 1020 kg Top machine Location: Bitburg – immediately available

Būklė: geras (naudotas), EMA obliavimo / storio obliavimo staklės Darbinis plotis: 500 mm Obliavimo stalo ilgis: 2.200 mm Gbodpfxszcc N Ee Afdjn 4 peiliai velenoje

Būklė: naujas, Planer-thicknesser HOLZKRAFT FS 52es digital TERSA - Demonstration machine - TERSA cutterblock, electrical height adjustment, digital display for planing thickness ----- Technical Data ----- Planing width: 520 mm, Thicknessing table size: 850 x 520 mm, Table length: 2,250 mm, Max. stock removal: 5 mm, Gsdpfx Afju R Sztedjbn Cutterblock diameter: 120 mm, Number of knives: 4, Passage height: 240 mm, Min. workpiece thickness: 3 mm, Feed speed: 5 / 8 / 12 / 18 m/min, Spindle speed: 5,000 rpm, Extraction port diameter: 120 mm, Motor output (400 V): 9.5 HP / 7.0 kW, Weight: 695 kg - new demonstration machine -

Būklė: naujas, Planer and Thicknesser HOLZKRAFT fs 41es TERSA - Demonstration Machine - ----- Technical Data ----- Planing width: 410 mm Thicknessing table dimensions: 775 x 410 mm Table length: 2,200 mm Max. cutting depth: 5 mm Cutterblock diameter: 95 mm Number of knives: 4 pcs Pass-through height: 240 mm Min. workpiece thickness: 3 mm Feed speed: 6 / 12 m/min Gedpfxou R S Awe Afdsbn Spindle speed: 5,000 rpm Extraction port diameter: 120 mm Motor power (400 V): 6.6 HP / 5.0 kW Weight: 450 kg - Special price - - new demo machine -

Būklė: naujas, - Sturdy grey cast iron steel construction - Large, ribbed surfacing tables made of cast iron - Smooth operation due to high dead weight - Four feed speeds Gjdpfju T Hq Sjx Afdobn - Motorized thicknessing table lift with two speeds and digital display - Segmented pressure bar at the infeed - Precision-mounted four-knife cutterblock - Helical-toothed steel infeed roller for particularly consistent and gentle wood feed - Outfeed roller with rubber coating - Large surfacing fence, tiltable from 90° to +45° - Supplied as standard with auxiliary fence - Powerful industrial motor - Pneumatic quick-change system with pneumatic lifting and lowering of the surfacing table - The extraction port remains in the same position for both surfacing and thicknessing operations, eliminating the need for additional extraction hoses or cumbersome re-routing around the machine This product comes with a 3-year Stürmer warranty upon online registration. Warranty applicable only to end customers in Germany and Austria. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Length (product) approx.: 2300 mm - Width/Depth (product) approx.: 1100 mm - Net Weight approx.: 980 kg Surfacer (Jointer): - Total table length: 2300 mm - Infeed table length: 1200 mm - Surfacer table width: 520 mm - Working height: 930 mm - Max. depth of cut surfacer: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt range: 90 – 45° Extraction Connection: - Extraction port diameter (thicknesser): 120 mm Installation Information: - Required length: 2300 mm - Required width/depth: 1610 mm - Note on required space: Dimensions account for maximum travel distances or usable lengths. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm - Note on working area: Please add the specified working area dimensions to the required space to obtain the recommended clear installation area for the machine. Thicknesser: - Thickness table width: 520 mm - Working height min.: 3.5 mm - Working height max.: 250 mm - Max. depth of cut (thicknesser): 8 mm Electrical Data: - Main motor power: 7 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Planer Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 pcs - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Būklė: labai geros būklės (naudotas), Obliavimo-storio matavimo staklės KNAPP AD 410 Profi T - naudotos - WIGO obliavimo velenas, šlifuoti pilkojo ketaus stalai, vieningu būdu atidaromi obliavimo stalai, stalo atidarymas į galą, nuolatinis pašaro greičio reguliavimas ----- Techniniai duomenys ----- Obliavimo plotis: 410 mm, Stalo ilgis: 1 700 mm, Peilių skaičius: 3 vnt., Obliavimo kreiptuvo pasukimo diapazonas: 45 °, Praėjimo aukštis: 230 mm, Padavimo greitis: 6–12 m/min., Siurbimo jungtis: 120 mm, Variklio galia: 4 kW, Svoris: 460 kg Kokybės informacija: - Obliavimo stalai sureguliuoti - Įleidimo ir išleidimo volai patikrinti ir sureguliuoti - Stalo vedimo bėgeliai patikrinti / sureguliuoti Gbsdpfx Afjymn Eyedon - Pilna pagrindinė inspekcija - Pilnas pagrindinis valymas - Elektros instaliacija patikrinta - Iškart paruošta darbui

Būklė: naujas, Gamybos metai: 2026, The CORMAK PT265T Planer-Thicknesser is a professional jointer-thicknesser designed for intensive and precise processing of solid wood and wood-based materials. The latest version of this machine features an innovative linked table system, significantly improving productivity and eliminating setup errors typical of older solutions. With a powerful 2.6 kW motor and a robust construction, the PT265T is a reliable tool for carpenters, craftsmen, and production workshops. Main features of the machine: - New linked table system – Constant calibration of the infeed and outfeed tables eliminates errors and enhances precision. - Stable cast iron construction – 170 kg own weight minimizes vibrations and increases safety. Gbjdpfx Afey El R Ejdon - Powerful total motor (S6): 2.6 kW – Ensures smooth and efficient machining of hardwoods. - Unique Benefit: Feed Rollers on Thicknesser – Specially designed roller extensions integrated into the thicknessing table aid in processing long and heavy workpieces, facilitating both infeed and outfeed handling while improving finish quality. - Simple conversion from jointer to thicknesser – Fast work mode switching reduces operational downtime. - Three HSS knives – Ensure precise cutting and superior surface quality. - 265 mm working width jointer – Wide table enables the machining of broad workpieces. Construction and technology: The CORMARK PT265T features a modern, reinforced design with cast iron components. Ground and precisely balanced work tables guarantee repeatability and accuracy. The new table system allows synchronous height adjustment; once the table level is set, recalibration is unnecessary when thicknessing settings change. The centrally positioned thicknessing table on a column ensures uniform material feeding without deviation. Rubber feet eliminate residual vibrations, enhancing component longevity and machining quality. Equipped with a 2.6 kW (S6) motor, the machine delivers high performance with stable parameters even when working with hard wood species. The 75 mm diameter cutterblock with three knives, running at 4000 rpm, ensures a perfectly smooth finish. A precise graduated scale allows for exact table height settings. The 700 x 150 mm aluminium tilting fence with an adjustable angle (90–45°) enables accurate squaring at various angles. Standard equipment: - Cutterblock with three HSS knives - Aluminium fence 700 x 150 mm - Graduated handwheel for table height adjustment - Cutterblock guard - Integrated 100 mm extraction port - Anti-vibration rubber feet Technical specifications: Cutterblock diameter [mm]: 75 Cutterblock speed [rpm]: 4000 Extraction port diameter [mm]: 100 Tilting fence angle [°]: 90–45 Number of knives: 3 Cutterblock length [mm]: 262 Knife dimensions [mm]: 250 x 25 x 3 Maximum planing width [mm]: 265 Maximum thicknessing width [mm]: 265 Maximum thicknessing height [mm]: 180 Maximum thicknessing depth of cut [mm]: 3 Maximum planing depth of cut [mm]: 2.5 Thicknesser feed speed [m/min]: 6 Fence dimensions [mm]: 700 x 150 Machine dimensions (L x W x H) [mm]: 1080 x 269 x 1000 Weight [kg]: 170 Total motor power: S6 2.6 kW Power supply: 400V

Būklė: naujas, Gamybos metai: 2026, The width of the tables and the massive 410mm construction allow for machining large elements made of both soft and hard wood. The polished table and stable planer construction ensure quiet, vibration-free operation. - Switching from jointer to thickness planer mode is very quick and simple. It involves unlocking the eccentrics, raising the tables, and repositioning the chip extraction hood. - The thickness adjustment handwheel is located on the right side of the machine. - Aluminium tilting fence with a graduated rule allows precise angle setting in the range of 90–45°. - The thickness planer table is centrally mounted on a column and features a handwheel for up and down adjustment. - Planing height is measured by a rule with a scale. Technical data: Gbodpfx Afsvxh T Dodon Cutterhead diameter [mm]: 70 Cutterhead speed [rpm]: 5500 Dust extraction port diameter [mm]: 120 Tilting fence angle [°]: 0 – 45 Number of knives / dimensions: 3 / 410x25x3 mm Shaft diameter [mm]: 70 Max. jointer width [mm]: 410 Max. thicknessing width [mm]: 408 Max. planing height [mm]: 5–225 Max. planing depth (thicknesser) [mm]: 3.5 Max. planing depth (jointer) [mm]: 4 Thicknesser feed speed [m/min]: 7 Jointer table dimensions (L x W) [mm]: 1660 x 410 Gross weight [kg]: 330 Motor speed [rpm]: 2800 Motor power [kW]: 5.2 kW Power supply: 3 phase, 400V

Būklė: naujas, Gamybos metai: 2026, CORMAK PT310ECO Planer Thicknesser with Cutterblock – Precision Machining and Work Efficiency The CORMAK PT310ECO is a modern planer thicknesser engineered for high-quality finishing, reliability, and low noise operation. Outfitted with a cutterblock, this advanced woodworking machine combines the functionality of a jointer and thickness planer within a robust, integrated design. Its sturdy construction and powerful motor make it a versatile solution for professional woodworking, ideal for both joinery workshops and craft studios. Key Features • Cutterblock – Three HSS knives (310x25x3 mm) ensure long service life, precise planing, and reduced noise levels. • Heavy-duty work tables – Cast iron tables minimize vibrations and guarantee stable material feed. • High power output – 2.2 kW (S1) / 2.6 kW (S6) motor offers consistent performance even during intensive operation. • Large working area – 310 mm working width and height up to 180 mm for processing a variety of workpieces. • Efficient chip extraction – Ø100 mm extraction port allows for easy connection to dust extraction systems. Construction and Technology The PT310ECO model features a 75 mm diameter cutterblock, ensuring smooth operation and greater durability compared to traditional knives. The planer thicknesser is equipped with wear-resistant cast iron work tables measuring 1290x310 mm (planer) and 540x310 mm (thicknesser). The machine also includes an adjustable fence (90–45°), enabling precise guidance of workpieces at an angle. Precision and Work Efficiency This unit offers a maximum cutting depth of 3 mm in jointer mode and 4 mm in thicknesser mode. With a cutterblock speed of 5,500 rpm and a stable design, it provides surfaces ready for gluing, varnishing, or further processing. This is a highly reliable thickness planer suitable for both series production and small-batch projects. Applications The PT310ECO Planer Thicknesser is designed for: • professional woodworking and furniture workshops, • prototype workshops and training centres, • maintenance departments in industrial plants, • technical schools and vocational institutes. Standard Equipment • Three-knife cutterblock • Cast iron work tables • Cutterblock guard • Ø100 mm chip extraction port • Feed and safety switches Gbedpjw Ab Twefx Afden Optional Accessories • Mobile undercarriage • Chip extraction system Technical Specifications Planer table dimensions: 1290x310 mm Thicknesser table dimensions: 540x310 mm Cutterblock diameter: 75 mm Cutterblock speed: 5,500 rpm Number of knives / size: 3 / 310 x 25 x 2.5 mm Fence tilt: 90–45° Chip outlet: 100 mm Maximum thicknessing height: 180 mm Max cutting depth: 3 mm (planer) / 4 mm (thicknesser) Motor power (S1/S6): S1: 2.2 kW / S6: 2.6 kW Maximum workpiece width: 310 mm Weight (gross): 200 kg Choose efficiency and durability. Select the CORMAK PT310ECO Planer Thicknesser with Cutterblock for top-tier woodworking standards in your production. Contact our technical advisor today.

Būklė: naujas, Gamybos metai: 2026, The Cormak PT265 Planer-Thicknesser is a robust and well-engineered machine, offering extensive adjustment capabilities and mechanical processing of both hardwood and softwood. The adjustment itself is simple, and converting the planer to thicknessing operation takes just a few seconds. Latest machine version with an innovative table opening system: ❌ Competing machines of the old type are fitted with “butterfly” tables. Before each job, the infeed and outfeed tables need to be recalibrated. Even small discrepancies between them lead to material damage and undesirable effects. ✔️ The new integrated table solution allows precise adjustment of both tables simultaneously! Once set, the tables remain permanently calibrated. When adjusting the planing height, both tables move in unison. ✔️ This innovation not only saves time and makes the machine more convenient to use, but also increases planing precision by 30% compared to previous systems. This is particularly important for working with thinner materials. Stable, vibration-resistant construction The machine’s weight of up to 170 kg, combined with wide, 265 mm precision-ground cast iron tables, ensures high stability and safe operation. Additional rubber feet ensure operation is virtually vibration-free. VERSION with the most powerful motor: S6 2.6 kW total output The PT265 Planer-Thicknesser stands out with its exceptionally powerful S6-rated 2.6 kW motor (2.2 kW S1). This is significantly more than most competitor machines, resulting in higher performance and stable operation. A more powerful motor means smooth operation and effortless processing of hard materials: Hardwoods require greater force to machine. The powerful motor handles this with ease. Effortless changeover from jointer to thicknesser. Switching from jointer to thicknesser mode is quick and straightforward—simply release the eccentrics, raise the tables, and reposition the chip extraction cover. Precision working. - Smooth height adjustment of tables with a scale. - Thicknesser table is centrally mounted on a column and features an adjustment handwheel. - Aluminum tilting fence (700x150 mm) with scale strip for precise adjustment between 90-45 degrees. Gbedsvxhznspfx Afden Technical data: Cutterhead diameter [mm]: 75 Cutterhead speed [rpm]: 4000 Extraction port diameter [mm]: 100 Tilting fence angle [°]: 0 - 45 Number of knives: 3 Cutterhead length [mm]: 262 Knife dimensions [mm]: 2500x300x30 Maximum planing width [mm]: 265 Maximum thicknessing width [mm]: 265 Maximum planing height [mm]: 180 Maximum thicknessing depth of cut [mm]: 3 Maximum planing depth of cut [mm]: 2.5 Thicknesser feed speed [m/min]: 6 Fence dimension [mm]: 700 x 150 Machine dimensions (L x W) [mm]: 1080 x 269 Weight [kg]: 170 Total motor power S6: 2.6 kW Power supply: 400V

Būklė: naujas, Gamybos metai: 2026, A planer-thicknesser is a versatile woodworking machine that enables leveling, sizing, and smoothing of timber. Ideal for carpentry and furniture manufacturing, it provides precise planing, surface finishing, edge-processing, board production, manufacturing of joinery elements, and preparation of glue-ready materials. This robust machine features a high-quality cast iron table, material removal knives, an electric motor, and adjustable controls, ensuring user-friendly operation. The planer-thicknesser, also known as a jointer, is designed for the initial processing of both rough and solid wood, as well as softwood (lumber). Its primary function is to flatten, size, and smooth timber using mechanical processes. This tool is particularly useful in woodworking and furniture production, where precision and repeatability are essential. Heavy-duty construction with increased mass for vibration resistance With a machine weight of 170 kg and wide, ground cast iron tables (250 mm), it guarantees high stability for safe operation. Additional rubber feet provide virtually vibration-free performance. VERSION with the most powerful motor, total power S6: 2.6 kW The PT260 planer-thicknesser stands out for its exceptionally powerful S6 2.6 kW (S1 2.0 kW) motor—significantly more robust than competing machines, resulting in higher performance and operational stability. A more powerful motor delivers stable operations and facilitates the machining of hard materials: hardwood processing requires higher force, which the powerful motor handles effortlessly. Effortless conversion from jointer to thicknesser Switching from jointer to thicknesser mode is fast and simple: just unlock the eccentrics, raise the tables, and reposition the dust extraction hood. Working precision - Stepless table height adjustment with scale. - Centrally mounted thicknessing table on a column with a handwheel for up-down adjustments. - 700x150 mm aluminum swing fence with a scale strip, enabling precise angular adjustment within a 90-45 degree range. Technical data: Cutterblock diameter [mm]: 75 Cutterblock speed [rpm]: 4,000 Suction port diameter [mm]: 100 Swing fence tilt angle [°]: 90 - 45 Number of knives: 3 Knife dimensions [mm]: 250x30x3 Table dimensions [mm]: 1,100 x 250 Thicknesser table [mm]: 600 x 248 Max. planing (jointer) width [mm]: 250 Max. planing thickness (planer) [mm]: 5 Gedpfx Aswt Axpefdjbn Max. thicknessing depth per pass [mm]: 2.5 Max. cutting depth (thicknesser) [mm]: 3 Max. thicknesser working height [mm]: 180 Thicknesser feed speed [m/min]: 6 Fence size [mm]: 700 x 150 Machine dimensions (L x W) [mm]: 1,100 x 250 Weight [kg]: 170 Total motor power: S1 2.0 kW | S6: 2.6 kW Power supply: 400V

Būklė: naujas, Gamybos metai: 2026, VERSION with the most powerful motor, total S6 power: 2.6 kW. A stronger motor ensures stable operation and easy machining of hard materials: hardwood requires more force for processing. A powerful motor handles this without any problem. Latest version of the machine with an innovative table opening system: • Competitive older machines feature 'butterfly-style' tables. Before each use, the infeed and outfeed tables must be calibrated against each other. Even minor differences can lead to material damage and undesired results. • The new connected table solution allows for precise adjustment of both tables at the same time! Once set, the tables remain calibrated permanently. When changing the planing height, both tables move simultaneously. • This solution not only saves time and increases operator convenience, but also improves planing accuracy by 30% compared to older designs. This is especially important when working with thinner materials. Effortless conversion from jointer to thickness planer. Switching from jointer to thickness planing function is very quick and simple. It only requires unlocking the eccentrics, lifting the tables, and repositioning the chip extraction cover. Work precision: • Smooth height adjustment of the tables with scale. • Thickness planer table mounted centrally on a column, equipped with a handwheel for up and down adjustment. • Aluminum tilting fence (700x150 mm) with scale bar, allowing precise angle adjustment from 90 to 45 degrees. Technical specifications: Cutterhead diameter: 75 mm Cutterhead speed: 4000 rpm Suction port diameter: 100 mm Tilting fence angle: 90–45° Number of knives: 3 Cutterhead length: 250 mm Knife dimensions: 250x30x3 mm Maximum jointer width: 250 mm Maximum thicknessing width: 250 mm Maximum planing height: 180 mm Maximum thicknessing depth of cut: 3 mm Maximum jointer depth of cut: 2.5 mm Thicknesser feed speed: 6 m/min Fence size: 700 x 150 mm Machine dimensions (L x W): 1080 x 269 mm Weight: 175 kg Total motor power: S1: 2.2 kW, S6: 2.6 kW Gedpfxovxh A Se Afdobn Power supply: 400V

Būklė: naujas, Gamybos metai: 2026, The CORMAK PT310ET Planer-Thicknesser is an advanced woodworking machine that combines the functionalities of a jointer and a thickness planer in one robust construction. It stands out due to its outstanding stability, high working power, and operator-oriented solutions such as additional feed rollers on the thicknesser table, improving precision and user comfort. Gbedpfx Afsxy Hy Uedon Main Advantages of the Machine - Motor Power S6: 2.8 kW (S1: 2.2 kW) – among the most powerful in its class, guaranteeing consistent performance even under heavy loads. - Stable construction weighing 180 kg – rigid cast iron tables and additional rubberized feet minimize vibrations and enhance precision. - Instant mode switching – quickly convert from jointer to thickness planer by lifting the tables and moving the chip extraction hood. - High operating standards – low noise emissions and precise material guidance ensure comfort and safety for the operator. - Efficient extraction system – Ø120 mm port allows for effective chip extraction, especially during intensive use. - Unique Benefit: Feed Rollers on Thicknesser – specially designed roller supports in the thicknesser table assist in processing long and heavy workpieces, facilitating feeding and collection of machined elements while improving finish quality. Applications - Carpentry and furniture workshops – for daily, efficient processing of solid wood and engineered boards. - Structural element manufacturing – ideal for surfacing and calibrating construction components, stairs, frames, or mouldings. - Technical schools – for teaching professional wood processing using high-quality industrial equipment. Standard Equipment - Three HSS knives (310×25×3 mm) - Cutterhead guard - Cast iron jointer tables - Ø120 mm extraction port - Feed switch and emergency STOP switch - User manual (DTR) - CE Declaration of Conformity Technical Specifications: Cutterhead diameter [mm]: 75 Cutterhead speed [rpm]: 5500 Extraction port diameter [mm]: 100 Fence tilt angle [°]: 90 - 45 Number/size of knives: 3 / 310×25×3 mm Maximum jointing width [mm]: 310 Maximum thicknessing width [mm]: 308 Maximum planing height [mm]: 5–225 Maximum thicknessing depth of cut [mm]: 2.5 Maximum jointing depth of cut [mm]: 4 Thicknesser feed speed [m/min]: 6 Jointer table size (L x W) [mm]: 1300 × 310 Gross weight [kg]: 180 Motor speed [rpm]: 2800 Motor power [kW]: S1: 2.2 kW / S6: 2.8 kW Power supply: 400V, 5-pin socket, 16A Manual (DTR): Polish/English CE Declaration: Yes

Būklė: naudotas, Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, obliavimo plotis: 410 mm, sukimosi greitis (maks.): 6 000 aps./min, obtotalinė obliavimo stalų ilgis: 1 800 mm, bendras svoris: 355 kg, obliavimo peilių skaičius: 3, obliaus veleno skersmuo: 72 mm, - Pagaminimo metai: 2014 - Nedažyta - Po techninės apžiūros - Naudojimo instrukcija, DTR dokumentacija TECHNINIAI PARAMETRAI: - Obliavimo plotis: 410 mm - Peilių skaičius: 3 - Sukimosi greitis: 6000 aps./min - Peilio veleno skersmuo: 72 mm LYGINTUVAS: - Obliavimo plotis: 410 mm - Didžiausias pjovimo storis: 4 mm - Lygintuvo stalų ilgis: 1800 mm - Lygintuvo liniuotės ilgis: 150 x 1100 mm STORIANTUVAS: - Obliavimo plotis: 404 mm - Storiantuvo stalų ilgis: 600 mm - Obliavimo aukštis min./maks.: 4/225 mm - Pavaros greitis: 6 m/min - Variklio galia: 4 kW Gsdpfx Asw H R I Sefdsbn - Įtampa: 3×400 V - Ištraukimo antgalio skersmuo: 100 mm Bendrieji staklių matmenys: - Ilgis: 1950 mm - Plotis: 800 mm - Aukštis: 1090 mm - Svoris: 355 kg

Būklė: naujas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Pagrindinės savybės: Profesionalus obliavimas: tobula lygiavimo ir tiksli storio obliavimo funkcija viename įrenginyje. Dviguba atverčiama sistema: patogus ir vienu metu atverčiami lygiavimo stalai greitam perjungimui į storio obliavimo režimą. Obliavimo velenas: galimas su patikrintu Silent-POWER® spiralinių peilių obliavimo velenu, užtikrinančiu itin tylų darbą ir be atplaišų rezultatus. Precizika: masyvūs ketaus lygiavimo stalai ir tiksliai vedama storio stalo atrama. Techninės detalės (pavyzdžiui): Lygiavimo plotis: priklausomai nuo modelio (pvz., 310 mm, 410 mm arba 510 mm). Lygiavimo stalo ilgis: dosniai padidintas saugiam ilgų ruošinių vedimui. Storio aukštis: nuolat reguliuojamas, pasirinktinai su elektroniniu skaitmeniniu ekranu (Power-Drive). Gedpfsy R D Nwjx Afdobn Padavimo pavara: tolygus ruošinio padavimas užtikrina tobulą paviršiaus kokybę. Privalumai: Kompaktiškas dizainas dėl kombinuotos konstrukcijos. Aukščiausias pakartojamumo tikslumas serijinėje gamyboje. Tvirta konstrukcija „Pagaminta Austrijoje“.

Būklė: naujas, Parduodu naują kombinuotą obliavimo-storintuvą su spiralia pavara ir ilgaskyle gręžtuvu VITAL FS41NSD. Naujas įrenginys. Didžiausias darbinis plotis: 410 mm Spiralinė galva su 3 peilių eilėmis, skersmuo 410x100 mm Pagrindinis velenas + padavimo variklis: 4,0 kW Bendras svoris: 510 kg Gbedpfx Afoq Dzmtsden Komplekte su ilgaskyle gręžimo stakle su reguliuojamu stalu Obliavimo (frezavimo) staklės: Didžiausias obliavimo gylis: 5 mm Stalo matmenys: 1800 x 410 mm (900 mm įėjimas + 900 mm išėjimas) Liniuotės matmenys: 1100 x 155 mm, reguliuojama nuo 0 iki 45° Storintuvo staklės: Didžiausias obliavimo gylis: 4 mm Didžiausias darbinis aukštis: 4–230 mm Padavimo greitis: 8 m/min. 1+1 viršutiniai spaudimo volai su atbulinės eigos apsauga 2 apatiniai volai stalo viduje palengvina šlapių ar sunkių ruošinių padavimą Rankinis storio reguliavimas Nusiurbimo gaubto skersmuo: 120 mm Europos gaminys, pagamintas ES, su CE sertifikatu ir naudojimosi instrukcija. Naujas, su 12 mėn. garantija. Įrenginys sandėlyje Kežmaroke, Slovakijoje, galima išbandyti.

Būklė: naujas, Parduodu naują kombinuotą obliavimo-storio obliavimo staklę su spiraline velena VITAL FS32NS. Nauja įranga. Maksimali darbinė plotis: 320 mm 3 peilių eilučių spiralinė velena, ø320x100 mm Pagrindinis velenas + padavimo variklis: 3,0 kW Bendras svoris: 360 kg Obliavimas: Didžiausias konstrukcinis obliavimo gylis: 5 mm Stalo matmenys: 1500 x 320 mm / 750 mm įėjimas + 750 mm išėjimas Liniuotės matmenys: 1100 x 155 mm / reguliuojama 0–45°. Storio obliavimas: Gbedpfxeq Dzlns Afdjn Didžiausias konstrukcinis obliavimo gylis: 4 mm Didžiausias darbinis aukštis: 4–230 mm Padavimo greitis: 8 m/min. 1+1 viršutiniai spaudimo volai su apsauga nuo atgalinio smūgio. Storio reguliavimas rankiniu būdu. Nusiurbimo vamzdžio diametras: 120 mm. Europos gaminys, pagamintas ES, su CE sertifikatu ir naudojimo instrukcija. Nauja įranga su 12 mėnesių garantija. Įranga sandėliuojama Kežmareke, Slovakijoje, galima išbandyti. Galimybė įsigyti papildomą įleidžiamų angų gręžimo staklę su reguliuojamu stalu, kaina 700 Eur. Sandėlyje.

Būklė: naujas, Gamybos metai: 2025, Technical Data: Usable working width: 520 mm Total table length: 2310 mm Cutterblock diameter: 120 mm Cutterblock speed: 5000 rpm 4 knives: 35x3x520 mm Aluminium planer fence: 1200x190 mm Planer fence tilting range: from 90° to 45° Min./max. planing height: 3 / 250 mm Feed speed thicknessing: 5-8-12-18 m/min Extraction hood diameter (planing): 120 mm Extraction hood diameter (thicknessing): 120 mm Standard equipment: - Infeed table adjustment via parallelogram system, chip removal display via degree scale - Simultaneous height adjustment and locking of the worktables, complete with anti-tipping device - Quick-change system for switching between planing and thicknessing (CE version) via special support for opening the planer tables, and automatic pneumatic positioning system for the extraction hood, with hydraulic assistance - "READY" electronic control includes: – Thickness table adjustment – Manual, semi-automatic, and automatic modes with 99 storable work programs – Additional functions: calculator and operating hour counter - Machine table height adjustment via 4 steel threaded spindles - Rubber-coated outfeed roller - Interchangeable feed rollers - Segmented pressure shoes at the infeed - Cutterblock and setting gauge for planer knives Including the following special accessories: "TERSA" cutterblock with disposable reversible knives, Tiltable auxiliary fence Gedpfxen Sm Tis Afdsbn

Būklė: naudotas, Obliavimo staklės: Darbo plotis: 520 mm Stalo ilgis: 2200 mm Veleno skersmuo: 120 mm Peilių skaičius: 4 vnt. Storio obliavimo staklės: Stalo matmenys: 520 x 850 mm Pašaravimo greitis: 6,5 - 17 m/min. Sandėliavimo vieta: Tiekėjo sandėlyje Gbsdpfxey Tpzqo Afden

Būklė: naudotas, Naudota mašina Įranga ir techniniai duomenys: - 4 peilių obliavimo velenas Gbjdpfsy R E U Ijx Afdon - Padvimo greitis 7,5/15 m/min Lygiavimo oblius: - Darbinis plotis: 500 mm - Bendras stalo ilgis: 2200 mm - Variklis: 4 kW Storis: - Min. darbinis aukštis: 3 mm - Maks. darbinis aukštis: 235 mm - Maks. drožlės nuėmimas: 8 mm - Skaitmeninis aukščio reguliavimo indikatorius su dešimtaine rodmenimi Prieinamumas: greitai Vieta: 63934 Röllbach

Būklė: labai geros būklės (naudotas), Combi 500 Kombinuotas obliavimo ir storio obliavimo staklės - 2 peilių velenas - Aigner pagalbinis atrama - Stalo ilgis: 1800 mm Gbsdpsy Tuctofx Afden - 2 ištraukimo jungtys - Pašarų variklis su 2 greičiais

Būklė: naujas, Gamybos metai: 2023, New machine Year of manufacture: 2023 Approx. length: 2300 mm Approx. width/depth: 1100 mm Approx. weight: 980 kg Total table length: 2300 mm Infeed table length: 1200 mm Working height: 930 mm Max. cutting depth: 6 mm Fence length: 1200 mm Fence height: 190 mm Fence swivel range: 90 - 45° Thickness extraction port diameter: 120 mm Main motor: 7 kW Required length: 2300 mm Required width/depth: 1610 mm Required space explanation: Dimensions include maximum travel range or working length. Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Working area explanation: Please add the specified dimensions to the required space to determine the recommended free installation area for the machine. Min. working height: 3.5 mm Max. working height: 250 mm Max. cutting depth: 8 mm Connection voltage: 400 V Phases: 3-ph Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed speed: 5/8/12/18 m/min Availability: short-term Gsdpjw I U Nujfx Afdebn Location: Solingen