Varikliu valdomos apvalinimo staklės lapams, kurių storis viršija 14 mm pirkti naudotą (110)

Gamybos metai: 1978, būklė: geras (naudotas), Manufacturer: HAEUSLER Model: VRM-HY Year of manufacture: 1978 Specifications Metric US Standard Rolling Width: 3050 mm Plate Thickness at 3x Upper Roll Ø: 60 mm Plate Thickness at 5x Upper Roll Ø: 70 mm Plate Thickness for Pre-Bending: 50 mm Csdpjkvm S Nefx Ah Hord Upper Roll Diameter: 630 mm Lower Roll Diameter: 600 mm Side Roll Diameter: 500 mm Number of Rolls: 4 Bending Speed: 0 - 5 Adjustment Speed Lower Roll: 200 mm/min Adjustment Speed Side Roll: 200 mm/min Number of Driven Rolls: 2 Motor Power: 120 kW Dimensions (approximate) Length: 5790 mm Width: 4200 mm Height: 4200 mm Weight: 85,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. All information is given in good faith, however, accuracy cannot be guaranteed. As such, these details do not constitute any representation or contractual terms. We recommend that you verify all essential details independently.

Gamybos metai: 1980, būklė: geras (naudotas), Manufacturer: HAEUSLER Model: VRM-HY Year of manufacture: 1980 Specifications Metric US Standard Roll width: 3,000 mm Plate thickness at 3 x top roll diameter: 130 mm Plate thickness at 5 x top roll diameter: 140 mm Plate thickness for pre-bending: 120 mm Top roll diameter: 950 mm Csdpfx Ajkvm Szeh Hord Bottom roll diameter: 850 mm Side roll diameter: 180 mm Number of rolls: 4 Bending speed: 2 + 4 Bottom roll adjustment: 0 - 400 mm/min Side roll adjustment: 0 - 400 mm/min Number of driven rolls: 2 Power: 132 + 37 kW Dimensions (approximate) Length: 12,000 mm Width: 5,440 mm Height: 5,650 mm Weight: 286,000 kg Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The details are supplied in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute any representation or terms of contract. We recommend verifying all important details.

Gamybos metai: 2018, būklė: geras (naudotas), Manufacturer: FACCIN Model: 4HEL 3590 Control: Siemens TOUCH Year of Manufacture: 2018 Specifications Metric / US Standard Roll Width: 3500 mm Plate Thickness at 3 x Top Roll Diameter: 80 mm Plate Thickness at 5 x Top Roll Diameter: 110 mm Plate Thickness for Pre-bending: 90 mm Top Roll Diameter: 900 mm Lower Roll Diameter: 800 mm Side Roll Diameter: 600 mm Number of Rolls: 4 Csdpjkvm Nfjfx Ah Hjrd Bending Speed: 0–6 m/min Lower Roll Adjustment: 0–200 mm/min Side Roll Adjustment: 0–400 mm/min Top Support: yes Side Support: yes Number of Driven Rolls: 2 Power Rating: 90 + 75 + 9 kW Approximate Dimensions Length: 4430 mm Width: 8800 mm Height: 11000 mm Weight: 178000 kg Please note: The information on this page has been provided to the best of our knowledge based on information from us and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. As such, no representations or contractual terms are implied. We recommend verifying all critical details.

Gamybos metai: 2007, būklė: geras (naudotas), Manufacturer: HAEUSLER Model: Clamp Year of manufacture: 2007 Specifications Metric / US Standard Min. inside diameter: 1800 Max. inside diameter: 5500 Min. outside diameter: 1500 Max. outside diameter: 2500 Min. wall thickness: 10 mm Cjdokwcn Espfx Ah Hjrd Max. wall thickness: 40 mm Max. weight per section: 15 t Max. total weight: 60 t Dimensions (approximate) Length: 24,000 mm Width: 6,000 mm Height: 3,200 mm Weight: 0 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. As such, this does not constitute representation or contractual terms. We recommend verifying all critical details.

Gamybos metai: 1991, būklė: geras (naudotas), Manufacturer: HAEUSLER Type: VRM-HY Year of manufacture: 1991 Specifications Crjdpokwcc Nofx Ah Hjd Metric / US Standard Roller width: 3000 mm Plate thickness at 3 x top roller Ø: 120 mm Plate thickness at 5 x top roller Ø: 150 mm Pre-bending thickness: 100 mm Top roller Ø: 910 + 820 + 740 mm Bottom roller Ø: 940 mm Side roller Ø: 780 mm Number of rollers: 4 Bending speeds: 2 + 4 Bottom roller adjustment: 200 mm/min Side roller adjustment: 500 mm/min Number of driven rollers: 2 Power: 300 kW Dimensions (estimated) Length: 8000 mm Width: 5400 mm Height: 5400 mm Weight: 290,000 kg Please Note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all critical details independently.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1980, 2500 mm x 340 Ømm viršutinis volas vyniojimo pajėgumas 2500 x 23 mm (5 x viršutinio volo skersmuo) Crodpfxeyz Acwj Ah Hed sunaudojimas 2500 x 15 mm su viršutiniu kranu ir šonine atrama

Būklė: visiškai atnaujintas (naudotas), Rundbiegemaschine ROUNDO Blechlänge: 2500 mm Codpfx Ahohx N Uko Hsrd Blechstärke: 30/25 mm 3 Walzen Gewicht: 19.000 kg

Būklė: visiškai atnaujintas (naudotas), BIEGERUNDMASCHINE Codpfxohxyilj Ah Hjrd BLECHLÄNGE: 4000 mm BLECHDICKE: 15 mm 3 WALZEN VORBIEGEN GEWICHT: 23.000 kg DIE MASCHINE IST IN EINEM TOP-ZUSTAND, WIE NEU NEUER SCHALTSCHRANK, NEUER ELEKTRISCHER SCHALTUNGSVERTEILER, NEUE KABEL, NEUE DICHTUNGEN, MOTOR UND PUMPE GENERALÜBERHOLT

Būklė: naujas, Lenkimo ilgis: 2100 Lakštų storis: 45 Lenkimas: 35 Viršutinio volelio skersmuo: 430 Šoninis volelis: 390 Variklis: 30 Išmatavimai (Ilg.xPlot.xAukšt.): 5200 x 2200 x 2500 Svoris apie: 19000 Techniniai duomenys: - Grūdinti ir poliruoti volai - Visa konstrukcija pagaminta iš ST-52 plieno - Kūginio lenkimo įrenginys - Skaitmeninis šoninių volų ekranas - Nešiojamas valdymo pultas Credpoytyy Nofx Ah Hjd - Volai montuoti su guoliais - Viršutinio volelio dangtis, hidrauliškai atidaromas ir uždaromas per valdymo pultą - Visi volai varomi hidrauliniais varikliais ir planetiniais reduktoriais - Šoniniai judesiai varomi hidrauliškai

Būklė: naujas, Lenkimo ilgis: 4100 mm Lakšto storis: 25 mm Viršutinio volo skersmuo: 460 mm Variklis: 22 kW Matmenys (IxPxA): 7200 x 2500 x 2200 mm Svoris apytiksliai: 31000 kg Lakšto ilgis: 4100 mm Techniniai duomenys: - Grūdinti ir poliruoti volai - Visiškai iš ST-52 plieno pagaminta konstrukcija - Kūginio lenkimo įrenginys - Šoninių volų skaitmeninis ekranas - Nešiojamas valdymo pultas - Volai sumontuoti ant guolių - Viršutinis volo dangtis, valdomas hidrauliniu būdu, atidaromas ir uždaromas per valdymo pultą - Visi volai varomi hidrauliniu varikliu ir planetine pavara - Šoninis judėjimas hidrauliškai valdomas - Atitinka CE reikalavimus Papildomai: - Kintamas sukimosi greitis EURO 5.858,-- - Medžiagos padavimo stalas pagal užklausą - Alyvos aušintuvas STD. Csdpfx Aod Ab Spsh Herd - Centrinė atrama EURO 18.750,-- - Šoninės atramos EURO 15.400,-- Turime daug nuorodų!

Būklė: naujas, Lakšto ilgis: 2100 mm Lakšto storis: 40 mm Lenkimas: 30 mm Viršutinio veleno skersmuo: 390 mm Šoninis velenas: 360 mm Variklis: 22 kW Matmenys (Ilgis x Plotis x Aukštis): 4900 x 1950 x 2200 mm Svoris apytiksliai: 17000 kg Techniniai duomenys: - Grūdinti ir poliruoti volai Csdpod Ab Sysfx Ah Hjrd - Visiškai iš ST-52 plieno pagamintas korpusas - Kūginio lenkimo įrenginys - Šoninio veleno skaitmeninis ekranas - Perkeliama valdymo pultas - Visi volai sumontuoti su guoliais - Viršutinio veleno dangtis, hidrauliškai atidaroma ir uždaroma per valdymo skydelį - Visi volai varomi hidrauliniais varikliais ir planetiniais reduktoriais - Šoninis judėjimas hidrauliškai valdomas Pasirinktys: - Kintamas sukimosi greitis: 4.682 EUR - Medžiagos padavimo stalas pagal užklausą - Alyvos aušintuvas: 1.040 EUR - Centrinė atrama: 13.600 EUR - Šoninės atramos: 9.250 EUR Turime daug nuorodų!

Būklė: naujas, Condition: New Estimated delivery time: approx. 12-14 weeks from order Country of origin: Turkey Price: €98,600 Leasing rate: €1,863.54 Bending length: 3,100 mm Maximum bending capacity (mild steel): 16 mm Maximum plate thickness without pre-bending at D=5x top roll: 16 mm Maximum plate thickness without pre-bending at D=3x top roll: 13 mm Maximum plate thickness without pre-bending at D=1.5x top roll: 16 mm Maximum plate thickness with pre-bending at D=5x top roll: 14 mm Maximum plate thickness with pre-bending at D=1.5x top roll: 12 mm Top roll diameter: 300 mm Bottom roll diameter: 300 mm Side roll diameter: 240 mm Maximum opening: 50 mm Working height: 1,140 mm Motor power: 18.5 kW Length: 5,310 mm Width: 1,660 mm Height: 1,140 mm Weight: 11,100 kg 4 rolls PLC control Fully hydraulic drive of the top and bottom rolls (for all four rolls from 30 mm bending capacity) via planetary gears Crjdpfx Asynm Hfoh Hjd Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop end Mobile control panel Overload protection Operating manuals available in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Top and side sheet supports NC controller IMPORTANT NOTES FOR CONICAL BENDING: Maximum plate thickness is 50% of the nominal capacity Cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €103,100 Leasing rate: €1,948.59 Bending length: 2,550 mm Max. bending capacity - mild steel: 25 mm Max. sheet thickness without pre-bending at D = 5x top roll: 25 mm Max. sheet thickness without pre-bending at D = 1.5x top roll: 20 mm Max. sheet thickness with pre-bending at D = 5x top roll: 20 mm Max. sheet thickness with pre-bending at D = 1.5x top roll: 16 mm Top roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5,500 mm Width: 2,000 mm Height: 1,900 mm Weight: 13,000 kg 4 rolls Fully hydraulic drive for top and bottom rolls Hydraulic adjustment for bottom and side rolls Digital readout for bottom and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Codpfx Ahjynm Euj Herd Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €97,400 Leasing rate: €1,840.86 Bending length: 2050 mm Max. bending capacity - mild steel: 30 mm Max. plate thickness without prebending at D = 5x upper roll: 30 mm Max. plate thickness without prebending at D = 1.5x upper roll: 25 mm Max. plate thickness with prebending at D = 5x upper roll: 25 mm Max. plate thickness with prebending at D = 1.5x upper roll: 20 mm Upper roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5 - 5 m/min Motor power: 22 kW Cedjynm Enspfx Ah Hsrd Length: 5000 mm Width: 2000 mm Height: 1900 mm Weight: 11,000 kg 4 rolls Fully hydraulic drive of upper and lower roll Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of the upper roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the nominal capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,700 Leasing rate: €1,014.93 Bending length: 2050 mm Maximum bending capacity (mild steel): 16 mm Max. plate thickness without pre-bending at D = 5x top roll: 16 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 13 mm Max. plate thickness with pre-bending at D = 5x top rolls: 13 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 10 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Crjdpsynm Ehefx Ah Hjd Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1550 mm Weight: 6100 kg Four rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of top roll Hydraulic drop-end bearing Two working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: - Infinitely variable rolling speed - Hydraulic side support - Hydraulic top support - NC control IMPORTANT POINTS FOR CONICAL ROLLING: - Maximum plate thickness for conical rolling is 50% of rated capacity - Cone length must be max. 30% or more than 60% of roll length - Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €111,500 Leasing rate: €2,107.35 Bending length: 3,100 mm Max. bending capacity – carbon steel: 20 mm Max. plate thickness without pre-bending at D=5x top roll: 20 mm Max. plate thickness without pre-bending at D=1.5x top roll: 16 mm Max. plate thickness with pre-bending at D=5x top roll: 16 mm Max. plate thickness with pre-bending at D=1.5x top roll: 12 mm Top roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 6,000 mm Width: 2,200 mm Height: 1,900 mm Weight: 15,000 kg 4 rolls Fully hydraulic drive for top and bottom rolls Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Device for conical bending Hydraulic relief of top roll Hydraulic drop-end bearing 2 working speeds Credoynm Ebopfx Ah Hed Centralized lubrication Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONE ROLLING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €73,200 Leasing rate: €1,383.48 Bending length: 2050 mm Max. bending capacity – mild steel: 20 mm Max. plate thickness without pre-bending at D = 5x top roll: 20 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 16 mm Max. plate thickness with pre-bending at D = 5x top roll: 16 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 12 mm Top roll diameter: 280 mm Bottom roll diameter: 280 mm Side roll diameter: 220 mm Rolling speed: 1.5 / 5 m/min Motor power: 16.5 kW Length: 4350 mm Width: 1700 mm Height: 1850 mm Weight: 8,550 kg 4 rolls Fully hydraulic drive of top and bottom rolls Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic relief for the top roll Hydraulic drop-end bearing 2 working speeds Central lubrication Overload protection Mobile control panel Equipment in accordance with CE regulations Csdpeynmyljfx Ah Hjrd OPTIONS (PRICES ON REQUEST): Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONE BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naudotas, Gamybos metai: 1994, bendras ilgis: 6 300 mm, bendras plotis: 2 000 mm, bendras aukštis: 1 800 mm, Svoris be krovinio: 24.000 kg Kaina: Pagal užklausą - Pagaminimo metai: 1994 - Dokumentacija prieinama: Ne - CE sertifikatas: Nėra - Serijos numeris: 10659 - Valdymas: Konvencinis - Volelių skaičius [vnt.]: 4 - Maks. lakšto storis [mm]: 25 - Maks. darbinis plotis [mm]: 3000 - Viršutinio volo skersmuo [mm]: 350 - Apatinių volelių skersmuo [mm]: 300 - Transportavimo matmenys: 6300 mm x 2000 mm x 1800 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 24000 kg - Transportavimo pakuotės [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/PVM atskaita: PVM atskaitomas įmonėms Crsdpfxsxyklns Ah Hed Pristatymas ir dalinis apmokėjimas galimi bet kokiai pramoninei įrangai Lukas van Rossum

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1978, mašinos/transporto priemonės numeris: 4303, Working width: 3000 mm Sheet thickness: 15 mm Crjdpjd D Nxxsfx Ah Hjd Sheet thickness when bending: 10 mm Top roller diameter: 320 mm Bottom roller diameter: 310 mm Working speed: approx. 5.5 m/min Electrical connection: 380 V kW Weight: approx. 17,000 kg Required space: 5450 x 2100 x 2450 mm

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1997, valdymo tipas: vadovas, pavaros tipas: hidraulinis, Myydään: Davi Promau MCB 3028 levynpyöristyskone (mekaanis-hydraulinen rakenne hydraulisella voimansiirrolla), suunniteltu metallilevyjen tehokkaaseen ja tarkkaan pyöristämiseen ja taivutukseen. Koneen suurin työleveys on 3000 mm ja levyn maksimipaksuus jopa 13 mm (materiaalilajista ja sovelluksesta riippuen). Koneessa on raskaan sarjan, suurihalkaisijaiset telat – mm. ylin tela Ø 280 mm – jotka parantavat vakauden ja toistotarkkuuden erityisesti vaativammissa töissä. Koneen kokonaismitat ovat noin 4800 × 1900 × 1900 mm ja paino noin 8800 kg. Ohjauspuolella laitteessa on vasemmalle puolelle asennettu Davi Smart -operaattoripaneeli, jossa on selkeät käyttökahvat ja painikkeet. Erillinen sähkö-/ohjauskaappi kuuluu varusteisiin. Keskitetty voitelujärjestelmä parantaa luotettavuutta ja vähentää päivittäisen ylläpidon tarvetta. Credpfjykmzbjx Ah Hed Turvallisuuteen on kiinnitetty käytännöllistä huomiota: kone on varustettu CE-turvavaijerilla työalueen ympärillä, ja useat varoitustarrat merkitsevät puristumis- ja kädenvaara-alueet. Hydrauliikkaletkut ja -liitännät ovat näkyvissä koneen edessä, mikä korostaa hydraulista toimintajärjestelmää. Koneessa on käytön jälkiä, kuten lievää pintakulumaa ja maalissa naarmuja, mutta ei merkkejä isommista vaurioista. Kaiken kaikkiaan tämä vankka ja monipuolisesti varusteltu Davi Promau MCB 3028 soveltuu erinomaisesti teolliseen levynmuovauskäyttöön, jossa vaaditaan kapasiteettia, tarkkuutta ja turvallista käyttöä.

Būklė: naujas, Sheet thickness: 45 Bending length: 3100 Top roll diameter: 480 Cjdpfod Ab Rcjx Ah Herd - Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically driven top cover for easy material removal - Digital display for bottom and side roll position - Hydraulic adjustment - Top and bottom rolls are driven by hydraulics and gearbox - The vertical movements of the bottom roll are hydraulically driven - Movable control panel - Conforms to CE standards Options: - Variable rotation speed (on request) - Material feed table (on request) - Oil cooler (on request) - Central support (on request) - Side supports - Automatic material extractor (on request) - PLC control (on request) - CNC control (on request) - Automatic material loading system (on request) - Interchangeable top roll (on request) - Adjustable bottom roll support system (for special customer requirements) (on request) We have many references!

Būklė: naujas, Bending length: 3100 mm Sheet thickness: 45 mm Top roll diameter: 510 mm Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel Cedpsd Ab Snofx Ah Hord - Rolls mounted on bearings - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements powered hydraulically Options: - Variable rotation speed EUR 5,858 - Material feed table on request - Oil cooler standard - Central support EUR 18,750 - Side supports EUR 15,150 We have numerous references!

Būklė: naujas, Sheet thickness: 45 mm Bending length: 3100 mm Top roll diameter: 510 mm Dimensions (LxWxH): 6300 x 2300 x 2590 mm Pre-bending: 35 mm Approx. weight: 33,500 kg Technical Data: - Hardened and polished rolls Crsdpsd Ab N Usfx Ah Hed - Complete frame made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulics and gearbox - Vertical movement of the lower roll is hydraulically powered - Movable control panel - In compliance with CE standards Options: - Variable rotation speed EURO 7,000 - Material feed table EURO 3,700 - Oil cooler EURO 800 - Central support EURO 9,500 - Side supports EURO 10,200 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (customized for special customer requirements) We have numerous references!

Būklė: naujas, Sheet thickness: 35 mm Bending length: 4100 mm Top roll diameter: 540 mm Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movements of the bottom roll are hydraulically driven - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed: EURO 6,940 - Material feed table: EURO 5,100 - Oil cooler: STD - Central support: EURO 18,750 - Side supports: EURO 17,000 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll Cedpsd Ab N Isfx Ah Hjrd - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Būklė: naujas, Sheet thickness: 70 Bending length: 2100 Upper roll diameter: 540 Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - 4 rolls arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic positioning - Top and bottom rolls are driven by hydraulics and gearbox - Vertical movement of the lower roll is hydraulically operated - Movable control panel - In accordance with CE standards Options: - Variable rotation speed EURO 6,940 - Material feeding table EURO 5,100 - Oil cooler STD - Central support EURO 19,500 - Side supports EURO 10,400 - Automatic material extractor - PLC control - CNC control - Automatic material loading system Csdped Ab N Sefx Ah Hjrd - Interchangeable top roll - Adjustable bottom roll support system (for special customer requirements) We have many references!