Varikliu valdomos apvalinimo staklės lapams, kurių storis viršija 14 mm pirkti naudotą (118)

Būklė: naujas, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €97,400 Leasing rate: €1,840.86 Bending length: 2050 mm Max. bending capacity - mild steel: 30 mm Max. plate thickness without prebending at D = 5x upper roll: 30 mm Max. plate thickness without prebending at D = 1.5x upper roll: 25 mm Max. plate thickness with prebending at D = 5x upper roll: 25 mm Max. plate thickness with prebending at D = 1.5x upper roll: 20 mm Upper roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Kodpfx Aoynm Ensf Hjna Rolling speed: 1.5 - 5 m/min Motor power: 22 kW Length: 5000 mm Width: 2000 mm Height: 1900 mm Weight: 11,000 kg 4 rolls Fully hydraulic drive of upper and lower roll Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of the upper roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the nominal capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,700 Leasing rate: €1,014.93 Bending length: 2050 mm Maximum bending capacity (mild steel): 16 mm Max. plate thickness without pre-bending at D = 5x top roll: 16 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 13 mm Max. plate thickness with pre-bending at D = 5x top rolls: 13 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 10 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1550 mm Weight: 6100 kg Four rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of top roll Hydraulic drop-end bearing Two working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: - Infinitely variable rolling speed - Hydraulic side support - Hydraulic top support - NC control IMPORTANT POINTS FOR CONICAL ROLLING: - Maximum plate thickness for conical rolling is 50% of rated capacity Kodpfx Aeynm Ehjf Hsna - Cone length must be max. 30% or more than 60% of roll length - Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €111,500 Leasing rate: €2,107.35 Bending length: 3,100 mm Max. bending capacity – carbon steel: 20 mm Max. plate thickness without pre-bending at D=5x top roll: 20 mm Max. plate thickness without pre-bending at D=1.5x top roll: 16 mm Max. plate thickness with pre-bending at D=5x top roll: 16 mm Max. plate thickness with pre-bending at D=1.5x top roll: 12 mm Top roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Kjdpfx Afjynm Ebj Hona Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 6,000 mm Width: 2,200 mm Height: 1,900 mm Weight: 15,000 kg 4 rolls Fully hydraulic drive for top and bottom rolls Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Device for conical bending Hydraulic relief of top roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONE ROLLING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €73,200 Leasing rate: €1,383.48 Bending length: 2050 mm Max. bending capacity – mild steel: 20 mm Max. plate thickness without pre-bending at D = 5x top roll: 20 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 16 mm Max. plate thickness with pre-bending at D = 5x top roll: 16 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 12 mm Top roll diameter: 280 mm Bottom roll diameter: 280 mm Side roll diameter: 220 mm Rolling speed: 1.5 / 5 m/min Motor power: 16.5 kW Length: 4350 mm Width: 1700 mm Height: 1850 mm Weight: 8,550 kg 4 rolls Fully hydraulic drive of top and bottom rolls Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic relief for the top roll Hydraulic drop-end bearing 2 working speeds Central lubrication Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS (PRICES ON REQUEST): Infinitely variable rolling speed Kedpfeynmyljx Af Hjna Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONE BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Lenkimo ilgis: 4100 mm Lakšto storis: 25 mm Viršutinio volo skersmuo: 460 mm Variklis: 22 kW Matmenys (IxPxA): 7200 x 2500 x 2200 mm Svoris apytiksliai: 31000 kg Lakšto ilgis: 4100 mm Techniniai duomenys: Kjdpfx Aod Ab Spof Hjna - Grūdinti ir poliruoti volai - Visiškai iš ST-52 plieno pagaminta konstrukcija - Kūginio lenkimo įrenginys - Šoninių volų skaitmeninis ekranas - Nešiojamas valdymo pultas - Volai sumontuoti ant guolių - Viršutinis volo dangtis, valdomas hidrauliniu būdu, atidaromas ir uždaromas per valdymo pultą - Visi volai varomi hidrauliniu varikliu ir planetine pavara - Šoninis judėjimas hidrauliškai valdomas - Atitinka CE reikalavimus Papildomai: - Kintamas sukimosi greitis EURO 5.858,-- - Medžiagos padavimo stalas pagal užklausą - Alyvos aušintuvas STD. - Centrinė atrama EURO 18.750,-- - Šoninės atramos EURO 15.400,-- Turime daug nuorodų!

Būklė: naujas, Lakšto ilgis: 2100 mm Lakšto storis: 40 mm Lenkimas: 30 mm Viršutinio veleno skersmuo: 390 mm Šoninis velenas: 360 mm Variklis: 22 kW Matmenys (Ilgis x Plotis x Aukštis): 4900 x 1950 x 2200 mm Svoris apytiksliai: 17000 kg Techniniai duomenys: - Grūdinti ir poliruoti volai - Visiškai iš ST-52 plieno pagamintas korpusas - Kūginio lenkimo įrenginys - Šoninio veleno skaitmeninis ekranas - Perkeliama valdymo pultas Knodpfsd Ab Syex Af Hea - Visi volai sumontuoti su guoliais - Viršutinio veleno dangtis, hidrauliškai atidaroma ir uždaroma per valdymo skydelį - Visi volai varomi hidrauliniais varikliais ir planetiniais reduktoriais - Šoninis judėjimas hidrauliškai valdomas Pasirinktys: - Kintamas sukimosi greitis: 4.682 EUR - Medžiagos padavimo stalas pagal užklausą - Alyvos aušintuvas: 1.040 EUR - Centrinė atrama: 13.600 EUR - Šoninės atramos: 9.250 EUR Turime daug nuorodų!

Būklė: naujas, Sheet thickness: 35 mm Bending length: 4100 mm Top roll diameter: 540 mm Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movements of the bottom roll are hydraulically driven - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed: EURO 6,940 - Material feed table: EURO 5,100 - Oil cooler: STD - Central support: EURO 18,750 - Side supports: EURO 17,000 - Automatic material extractor - PLC control - CNC control Ksdpod Ab N Iefx Af Hsna - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Būklė: naujas, Sheet thickness: 70 Ksdpfxod Ab N Ss Af Hena Bending length: 2100 Upper roll diameter: 540 Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - 4 rolls arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic positioning - Top and bottom rolls are driven by hydraulics and gearbox - Vertical movement of the lower roll is hydraulically operated - Movable control panel - In accordance with CE standards Options: - Variable rotation speed EURO 6,940 - Material feeding table EURO 5,100 - Oil cooler STD - Central support EURO 19,500 - Side supports EURO 10,400 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable bottom roll support system (for special customer requirements) We have many references!

Būklė: naujas, Sheet thickness: 45 Bending length: 3100 Top roll diameter: 480 - Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically driven top cover for easy material removal - Digital display for bottom and side roll position - Hydraulic adjustment - Top and bottom rolls are driven by hydraulics and gearbox - The vertical movements of the bottom roll are hydraulically driven - Movable control panel - Conforms to CE standards Options: - Variable rotation speed (on request) - Material feed table (on request) - Oil cooler (on request) - Central support (on request) - Side supports - Automatic material extractor (on request) - PLC control (on request) - CNC control (on request) - Automatic material loading system (on request) - Interchangeable top roll (on request) - Adjustable bottom roll support system (for special customer requirements) (on request) We have many references! Kodpfxjd Ab Rco Af Hjna

Būklė: naujas, Sheet thickness: 45 Bending length: 2100 Top roll diameter: 430 Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - 4 symmetrically arranged rolls - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movement of lower roll hydraulically powered - Movable control console - In compliance with CE standards Options: - Variable rotation speed: EUR 5,858 - Material feed table: EUR 3,506 - Oil cooler: EUR STD - Central support: EUR 13,600 Knodpfxod Ab Rne Af Hja - Side supports: EUR 9,600 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Būklė: naujas, Bending length: 3100 mm Sheet thickness: 45 mm Top roll diameter: 510 mm Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted on bearings - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements powered hydraulically Options: - Variable rotation speed EUR 5,858 - Material feed table on request - Oil cooler standard - Central support EUR 18,750 Knsdpfxjd Ab Sno Af Hoa - Side supports EUR 15,150 We have numerous references!

Būklė: naujas, Bending length: 2100 mm Sheet thickness: 16 mm Top roll diameter: 270 mm Technical specifications: - Rolls are hardened and polished - Entire frame made of ST-52 steel - Conical bending device - Digital display for side rolls Kedpod Ab Tfefx Af Hona - Portable control console - Rolls mounted with bearings - Top roll cover hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements driven hydraulically Options: - Variable rotation speed: EUR 4,682 - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 8,250 - Side supports: EUR 5,700 We have numerous references!

Būklė: naujas, Sheet thickness: 40 mm Bending length: 3100 mm Top roll diameter: 460 mm Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for the position of the lower and side rolls - Hydraulic adjustment - Top and bottom rolls powered by hydraulics and gearbox - Vertical movement of the lower roll is hydraulically driven - Movable control panel - In compliance with CE standards Options: - Variable rotation speed EUR 5,858 - Material feed table EUR 5,100 - Oil cooler STD - Central support EUR 18,750 Knedpfxjd Ab Rfe Af Hja - Side supports EUR 15,000 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Exchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Būklė: naujas, Sheet thickness: 35 Bending length: 3100 mm Upper roll diameter: 460 mm Technical Data: - Hardened and polished rolls - Complete frame made of ST-52 steel - The 4 rolls are symmetrically arranged - Hydraulically operated top cover for easy material removal - Digital display for bottom and side roll positions - Hydraulic adjustment - Upper and lower rolls driven by hydraulics and gearbox Knedpfxed Ab Rgj Af Hsa - The vertical movements of the lower roll are driven hydraulically - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed EURO 5,325 - Material feed table EURO 3,896 - Oil cooler STD. - Central support EURO 12,058 - Side supports EURO 11,258 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for specific customer requests) We have numerous references!

Būklė: naujas, Sheet thickness: 50 | Bending length: 2600 | Top roll diameter: 510 Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - The 4 rolls are symmetrically arranged Knedpfx Afsd Ab Rae Hja - Hydraulically driven top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movements of the lower roll are hydraulically powered - Movable control panel - In compliance with CE standards Options: - Variable rotation speed EURO 5,858 - Material feed table EURO 5,100 - Oil cooler STD. - Center support EURO 18,750 - Side supports EURO 12,750 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Exchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!

Būklė: naujas, Sheet thickness: 20 mm Bending length: 3100 mm Top roll diameter: 360 mm Technical specifications: - Hardened and polished rolls - Entire frame made from ST-52 steel - 4 rolls arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll position - Hydraulic adjustment - Top and lower rolls driven by hydraulics and gearbox - Vertical movement of the lower roll is hydraulically driven - Mobile control panel Knsdped Ab Rvjfx Af Hoa - CE compliant Options: - Variable rotation speed: EUR 4,681 - Material feed table: EUR 3,400 - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 9,400 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Būklė: naujas, Sheet thickness: 20 mm Bending length: 2600 mm Top roll diameter: 330 mm Technical data: - Hardened and polished rolls - Entire frame made of ST-52 steel - 4 rolls arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for bottom and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movement of bottom roll is hydraulically powered - Movable control panel - In compliance with CE standards Options: - Variable rotation speed EUR 4,681 - Material feed table EUR 3,400 - Oil cooler EUR 1,040 Kodpfed Ab R Aox Af Hona - Central support EUR 13,600 - Side supports EUR 9,200 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable bottom roll support system (for special customer requirements) We have many references!

Būklė: naujas, Bending length: 4100 mm Sheet thickness: 20 mm Top roll diameter: 430 mm Technical data: - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control console - Rolls mounted with bearings - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically powered Knedpod Ab Srsfx Af Hea Options: - Variable rotation speed EUR 5,858 - Material feed table on request - Oil cooler STD. - Central support EUR 13,600 - Side supports EUR 15,400 We have numerous references!

Būklė: naujas, Bending length: 3100 mm Sheet thickness: 35 mm Upper roll diameter: 430 mm Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Top roll cover hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements driven hydraulically Options: - Variable rotation speed: EUR 5,858 Ksdpfed Ab Stox Af Hena - Material feed table on request - Oil cooler standard - Central support: EUR 13,600 - Side supports: EUR 12,000 We have numerous references!

Būklė: naujas, Bending length: 2100 mm Sheet thickness: 30 mm Upper roller diameter: 360 mm Technical specifications: - Hardened and polished rollers - Complete frame made of ST-52 steel Knjdpfod Ab S Ejx Af Hsa - Conical bending device - Digital display for side rollers - Mobile control console - Rollers mounted with bearings - Upper roller cover hydraulically openable and closable via control panel - All rollers are driven by hydraulic motors and planetary gear units - Lateral movements are hydraulically driven Options: - Variable rotation speed: EUR 4,682 - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 9,060

Būklė: naujas, Sheet length: 2600 mm Sheet thickness: 20 mm Top roll diameter: 330 mm Technical data: - Hardened and polished rollers - Full body made from ST-52 steel - Conical bending device - Digital display for side rollers - Portable control panel Kodpfx Ajd Ab S Nsf Hjna - Rollers mounted with bearings - Top roller cover, hydraulically openable and lockable via control panel - All rollers powered by hydraulic motor and planetary gear system - Lateral movements are hydraulically driven Options: - Variable rotation speed EURO 4,682 - Material feed table upon request - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 9,200 We have numerous references!

Būklė: naujas, Bending length: 2100 mm Sheet thickness: 25 mm Top roll diameter: 330 mm Technical data: Knjdpfx Afjd Ab S Re Hja - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Top roll cover, hydraulically openable and lockable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements are hydraulically powered Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 8,400 We have many references!

Būklė: naujas, Bending length: 2600 mm Knedpjd Ab S Ujfx Af Hoa Sheet thickness: 16 mm Top roll diameter: 300 mm Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control console - Rolls mounted with bearings - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements are hydraulically powered Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 8,250 We have numerous references!

Būklė: naujas, Sheet thickness: 30 mm Bending length: 4100 mm Top roll diameter: 510 mm Technical specifications: - Hardened and polished rolls Kedpfed Ab N Tsx Af Hjna - Complete body made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls are driven by hydraulics and gearbox - The vertical movement of the lower roll is hydraulically powered - Movable control panel - In compliance with CE standards Options: - Variable rotation speed: EUR 5,858 - Material feed table: EUR 5,100 - Oil cooler: standard - Central support: EUR 18,750 - Side supports: EUR 16,800 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Būklė: naujas, Sheet thickness: 45 mm Bending length: 3100 mm Top roll diameter: 510 mm Dimensions (LxWxH): 6300 x 2300 x 2590 mm Pre-bending: 35 mm Approx. weight: 33,500 kg Technical Data: - Hardened and polished rolls - Complete frame made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulics and gearbox Ksdpfxed Ab N Us Af Hena - Vertical movement of the lower roll is hydraulically powered - Movable control panel - In compliance with CE standards Options: - Variable rotation speed EURO 7,000 - Material feed table EURO 3,700 - Oil cooler EURO 800 - Central support EURO 9,500 - Side supports EURO 10,200 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (customized for special customer requirements) We have numerous references!