Švytuoklinis smūginis bandymo prietaisas 5,5 J

Zwick Roell HIT5.5P

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, Zwick Roell pendulum impact tester HIT5P Plus including TestXpert III software and 2 Charpy pendulums Year of manufacture: 2019 Dossier number: DO733812 Safety guard, fixed on the left • 010924 Software TestXpert III Kedpfxew H Ands Aa Isnd TestXpert III Basic Program 1035123 TestXpert III Standard Test Program 1035790 Manual Charpy pendulum 1J BPI-ACPECHI.112 Charpy pendulum 5J BPI-ACPECHI.115 Testing according to Charpy ISO 179-1:2000 + amd. 1:2005 German Version EN ISO 179-1:2000 + A1_2005 Dimensions: 680 x 658 x 404 mm (without guard) Max. working capacity: 5 J Dimensions (W x H x D): 680 x 658 x 404 mm (without guard) Weight (without fixtures): approx. 75 kg Electrical connection: 100 to 240 V, 50/60 Hz, 70 W Interfaces: RS232, USB Angular resolution: 0.018° Test results (numeric): Impact energy [%] Impact energy [J; ft lbf] Impact toughness [kJ/m²] Control function: Pendulum vertical position Oscillation time Pendulum vertical position Oscillation time Correction function: friction correction Impact tensile test: Air and bearing friction - kinetic crosshead energy 3.1 Charpy Tests The Charpy supports consist of a solid cast base body. Test-specific components, such as supports and anvils, are selected according to the specimen spectrum. The anvils, whose surface roughness and radius can have a significant effect on the test results, are fully precision CNC-manufactured and 100% measured. ZwickRoell does not offer one-piece anvils, for which dimensional accuracy cannot be consistently achieved. During assembly, the spatial position of the anvil relative to the pendulum striker can be ensured by an optional gauge. Anvils are subject to higher wear than supports; two-piece anvils can be replaced cost-effectively and independently of other accessories. Quick-change adapter plates are used to adjust the impact point to the specimen width in the direction of impact. Adjustment to the specimen thickness (vertical direction) is achieved using appropriately sized supports, which are positioned precisely with locating pins. Optional accessories for the supporting frame include a pivoting protective screen and alignment units, which position the specimen either at the notch or at an end face to the point of impact. Advantages: • Fast changing of the support frame • Precision manufacturing and documented 100% dimensional accuracy inspection of anvils

Sąlyga: geras (naudotas), Gamybos metai: 2003, Ram stroke – max. 100 mm Module – max. 8 Table diameter – 400 mm Workpiece diameter – 600 mm Strokes per minute – 80–1200 spm Radial axis feed range – 1 to 3750 mm/min Adjustable angle range – -0.5° to +0.5° Accessories: Knjdsvfwuqspfx Aa Ijd - Various tool holders - Various clamping devices - Documentation

Sąlyga: naudotas, TECHNICAL DATA - Pulling force: 80 [kN] - Maximum broaching stroke: 1250 [mm] - Maximum feed travel: 500 [mm] - Broach lengths: 650 - 1400 [mm] - Table width: 400 [mm] - Broaching speed: 1 - 10 [m/min] - Return stroke speed: 1 - 15 [m/min] Ksdpfou E U R Tex Aa Ijnd - Installed power: 25 [kW] - Machine weight: 4300 [kg]

Sąlyga: labai geros būklės (naudotas), Here we offer a Weiss climate test chamber. Model: SB2/500/80, water-cooled Cooling-heating operation: -75°C to +180°C Climate operation: +10°C to +95°C Humidity range: 10% to 98% relative humidity Temperature stability, temporal: ±0.2K Kjdjm Tvzcopfx Aa Iend Humidity stability: ±1% r.H. Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height 1980 mm, Width 1265 mm, Depth 1365 mm Feedthroughs: Left side: ∅ 100 mm Right side: ∅ 50 mm Connection voltage: 400V/3Ph+N+PE/50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerants: R404a / R23 For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Type: SB2/500/80 Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change and error!) We are happy to answer any further questions you may have by phone.

Sąlyga: naudotas, Gamybos metai: 2003, Wheel diameter – max. 600 mm Wheel width 92 mm Module – max. 8 mm Ram stroke – max. 100 mm Table diameter 400 mm Knedpsvzhflsfx Aa Ijd Workpiece diameter 600 mm Max. shaper normal module 8 mm Adjustable angle from -0.5° to +0.5° Stroke rate range 80 – 1200 strokes/min Radial axis feed (machine base) 1 – 3750 mm/min Accessories: - Various shaper tool holders - Various clamping devices - Documentation

Sąlyga: naudotas, Voumard Knedpfxotzarnj Aa Isd

Sąlyga: naudotas, Gamybos metai: 1996, Workpiece diameter: 240 mm Centre distance: 0 mm Maximum honing length: 500 mm Maximum module: 5 Total power requirement: 12 kW Kjdpfjt Hwvmjx Aa Ijnd Machine weight approx.: 5,000 kg Required floor space approx.: [missing] R E I S H A U E R (Switzerland) CNC-Controlled Gear Honing Machine Model: RZR, Year: 1996 # 74 105 _____ Wheel diameter min./max.: 10 - 240 mm Module: 0.5 - 5 Helix angle: +/- 30° Workpiece slide stroke (Z-axis): 275 mm Honing tool traverse stroke (X-axis): 128 mm X-axis infeed: 0.001 mm/stroke Crowning approx.: 0.5° Workpiece clamping length approx.: 500 mm Max. workpiece oscillation approx.: 3,000 mm Honing tool external/internal diameter x width: 325/308 x 45 mm Honing tool rotational speed: 100 - 1,200 rpm Honing tool dressing speed: 30 - 1,000 rpm Spindle drive: 4 kW Total drive approx.: 12 kW - 400 V - 50 Hz Total weight approx.: 5,000 kg Accessories / Special equipment: - SIEMENS CNC path control type 810 G allows input of all relevant gear data and dialog-based workpiece setup with the controller. With DNC interface RS 232 for data input and output. - A-axis = swiveling/helix adjustment, Z-axis = table movement, X-axis = honing tool infeed, S-axis = honing wheel speed, U-axis = crowning adjustment. - Equipped with attached automatic device for threading the honing wheel into the tooth gap. - The tool swivel angle (A-axis) is also electrically positioned, fast and precise, and hydraulically clamped, resulting in reduced set-up times. - Hydraulic workpiece clamping via footswitch between the workpiece spindle headstock and tailstock, both units movable on the workpiece table depending on the workpiece. - Complete working area enclosure with sliding doors and safety interlock. - Extensive original REISHAUER honing oil processing system type RTO 40.10, with centrifuge and cooling unit for constant honing oil temperature, oil mist filter, etc. - Various diamond dressing tools mounted on arbors. - Separate ventilated and cooled electrical/control cabinet, separate hydraulic unit.

Sąlyga: visiškai atnaujintas (naudotas), Galimi gumos bandymo prietaisai 1 x Alpha Production MDR reometras (pageidaujant konteineryje su pneumatiniu mėginių štampavimo įrankiu) Knjdpfx Aaowmnlho Isd Prietaisas patikrintas, sukalibruotas ir aprūpintas nauja programine įranga naujame Tower kompiuteryje!

Sąlyga: labai geros būklės (naudotas), FOBA laser marking system, FOBALAS 100 CW/QS – Nd:YAG, 1.064 nm, laser marking device Kedpfx Aaolq Dkpo Isnd

Gamybos metai: 2024, Sąlyga: naujas, Punching dies made from solid steel, eroded Our punching dies are manufactured from selected steels and are available in a wide range of geometries and standards such as ISO, DIN, JIS, ASTM, and IEC. They are distinguished by: Knedskkhkujpfx Aa Ijd - Expert selection of steel - Material-specific cutting geometry - Optional configurations with various sample ejectors and clamping pins - Custom manufacturing in different heights possible - Available as multicutter versions - Excellent cutting finish - Optimal cutting results - Suitable for all types of presses, e.g., manual toggle presses, pneumatic and hydropneumatic presses