Klimato bandymų kamera su drėgmės palaikymu

Weiss SB2/500/80 -75°C bis +180°C

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, bendras ilgis: 620 mm, Mechanics: All wear parts of the machine are replaced, including the feed spindle on the X-axis. All assemblies are restored to a like-new condition. After the overhaul, the machine is comparable to a new unit. Geometry: The machine is completely disassembled down to the guideways. Before the geometry of each table and assembly is restored, both the X and Z-axis guideways are hand-scraped and restored to like-new condition. Upon completion, the machine receives a measurement protocol according to the manufacturer's specifications. Painting: After the machine's geometry is restored, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also fully overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Machine Specifications: Technical Data: Centre height: 150 mm Centre distance: 680 mm Grinding length: 620 mm Hfjdpfxeurw Uys Af Ieb Machine Weight and Dimensions: 2,500 kg // 2340 x 1445 x 1900 mm Machine Equipment (Standard): 1x Workpiece headstock MK5 1x Operator panel 1x Mount for internal grinding spindle 1x Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1x Hydraulic unit Optional: - 2-axis digital readout system - Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds possible upon clarification of technical details) - Separate low speed for part alignment

Gamybos metai: 2003, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Stock no. 2651 Hjdpfxeiyyf Io Af Iofb 1 used underwater pelletizing system, partially overhauled in 2023 Throughput up to approx. 450 kg/h, depending on material, comprising: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, 4.4 kW drive By-pass system TVE 1000 ED pellet dryer with 4 kW drive included Agglomerate catcher Temperature-controlled water system with 200 L water tank, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further underwater pelletizing systems available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: complete compounding and pelletizing lines, with single-screw or twin-screw extruders.

Gamybos metai: 1986, Sąlyga: labai geros būklės (naudotas), Dimensions (LxWxH): approx. 450 x 300 x 1700 mm Maximum drilling depth: 60 mm Maximum workpiece height: 350 mm Table dimensions: 250 x 250 mm Hfsdpfx Aeh Dimyof Ijb Spindle speed: 430 - 9000 rpm (12 speed settings) 2 motor speeds Speed adjustment via V-belt Includes drill chuck Includes 16 A connection plug Includes base frame

Gamybos metai: 2004, Sąlyga: labai geros būklės (naudotas), ARTIKEL: A-QB1200, PULVERBLANDER FOODTECH Dissolver-blanderenhed PU133 Mærke: QB Food Tech. Type: QB 1200 Volumen: 1.200 liter. Med kappe til køling/varme. Blandeomrører. Hsdpfx Afopcg Haj Iefb Vægtceller.

Sąlyga: naudotas, Gamybos metai: 2017, kuro tipas: dyzelinas, Įranga: kabina,

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Drying system / dryer suitable for various materials such as powders, granulates, etc. - Control system for temperature regulation Hfjdpfx Asqu R Nasf Isb This machine is connected and ready for testing in our machinery hall.

Sąlyga: labai geros būklės (naudotas), Here we offer a Heraeus Vötsch temperature chamber. Heraeus Vötsch Temperature Chamber, water-cooled Test chamber volume: 110 liters Test chamber dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Hfjdpfx Aehrdy Ssf Iob Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Temperature change rate (cooling): 3.2 K/min Temperature change rate (heating): 3.5 K/min Refrigerant: R-404 A / R 23 Voltage: 1/N/PE AC 230V±10% 50Hz Rated power: 1.8 kW Rated current: 12 A Type: VT 7011 Important information for your peace of mind as a buyer: The following procedures are carried out on all chambers offered by us: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) (Specifications and technical details are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), CTS Test Cabinet / Climate Chamber We are offering a CTS climate chamber for sale. Air-cooled Test chamber volume: 200 liters Internal chamber dimensions: height 750 mm, width 650 mm, depth 400 mm External dimensions: height 1800 mm, width 920 mm, depth 1345 mm Temperature operating range Temperature range: -40°C to +180°C Cooling rate: 4 K/min Heating rate: 4 K/min Maximum heat input at +20°C: 3500 W Temperature stability (temporal): ≤± 0.3 K Climate operating range Temperature range: +10°C to +95°C Humidity range: +10% to +98% RH Connection: 400 V +6% -10%, 3/N, 50 Hz Hodpjhwhzwsfx Af Iofb Rated current: 9.4 A Rated power: 4.8 kW Weight: approx. 450 kg Refrigerant: R404A Model: CTS C-40/200 The following points are performed on the chambers we offer in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see photo) (Technical data and information may be subject to change and error!) If you have further questions, feel free to contact us by phone.

Sąlyga: geras (naudotas), 1 x drilling and tapping machine Steinel Hedpfjma Efysx Af Ijfb GT.6.52 Technical data: Speeds: 500/630/1000/1250 rpm Capacity in steel: M6 Max. chuck clamping diameter: 10 mm The machine can be inspected under power.

Sąlyga: naujas, Saw blade diameter: 315 mm Cutting diameter: 90 mm Stroke: -- mm Mitre cuts: -45° to +45° Speed: 40 / 80 rpm Machine weight: approx. 165 kg Space requirement: approx. 1.0 x 1.15 x 1.48 m Manual Metal Circular Saw MKS 315 N Promotion Set / Art. No. 3620303SET - Two cutting speeds - Rotating machine head, 45° left and 45° right - Reduction gearbox, quiet operation in oil bath - Automatic diaphragm coolant pump with coolant filter - Vice with counter-vice, quick-clamping and anti-burr jaws ensures precise and burr-free cuts - Side material support arm with roller - Vice swivels 45° left and 45° right - Movable safety guard provides optimal operator protection during cutting - Control handle with safety switch - Vice with counter-vice, quick-clamping and anti-burr jaws - Side material support arm with roller - Longitudinally adjustable vice for longitudinal cuts and slotting Hfjdpfoibw Smex Af Iob 0° (round) solid material: 55 mm 0° (round) tube: 90 mm 0° (square) tube: 80 x 80 mm 0° (rectangular) tube: 115 x 70 mm -45° (round) solid material: 50 mm -45° (round) tube: 80 mm -45° (square) tube: 70 x 70 mm -45° (rectangular) tube: 70 x 70 mm +45° (round) solid material: 50 mm +45° (round) tube: 80 mm +45° (square) tube: 70 x 70 mm +45° (rectangular) tube: 70 x 70 mm