Temperatūros spintelė

WEISS WT3- 180/40

Sąlyga: labai geros būklės (naudotas), Weiss Type: WT3-1000/40 Weiss Temperature Test Chamber with S!MCON / 32 Control, Water-Cooled Control Panel »Touch Panel« All control and operation commands can be triggered on the control panel »touch panel« by simply touching the function symbols. Leveling Feet To compensate for floor unevenness and to ensure adequate ventilation of the machine component, the test chamber is equipped with adjustable feet. Cable Ports The test chamber is equipped with cable ports on the right and left sides. Measuring cables and testing equipment can be routed into the test compartment through these ports. Cable ports included in the standard version: R1: Nominal width 125 mm L1: Nominal width 50 mm Test Chamber Volume: approx. 990 liters Test Chamber Dimensions: Height 950 mm, Width 1100 mm, Depth 950 mm External Dimensions: Height 2000 mm, Width 1415 mm, Depth 2105 mm Temperature Test Data: Temperature Range: -40 to +180 °C Temperature Fluctuation over Time at Chamber Center: ± 0.1 to ± 0.5 K Spatial Temperature Deviation: ± 0.5 to ± 1.5 K Temperature Change Rate: Heating: 4.0 K/min Cooling: 3.0 K/min Maximum Heat Compensation: 4500 W Operating Data: Test Chamber Lighting: Halogen bulb 2x 24V, 50W Rated Voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated Current: 22.0 A, Rated Power: 11.5 kW Protection (on-site): 32 A slow-blow fuse Sound Pressure Level: Measured at 1m distance from the front, 1m height: 56 dB(A) Refrigerant: R-404A Weight: 840 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant Djdpfx Asthhw Asdmocn 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Technical specifications subject to change and error!) We are happy to answer any further questions you may have by phone.

Sąlyga: labai geros būklės (naudotas), We are offering a Weiss temperature test chamber. Weiss Temperature Test Chamber with S!MCON / 32 Controller, Water-Cooled Control Unit: "Touchpanel" All control and operation commands can be triggered simply by touching the function symbols on the "Touchpanel" control unit. Adjustable Feet To compensate for floor unevenness and ensure sufficient ventilation of the machine components, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These allow measuring lines and test devices to be routed into the test chamber. Standard feedthroughs installed: R1: Nominal width 125 mm L1: Nominal width 50 mm (Refrigerant converted to R-452A) Test Chamber Volume: approx. 600 liters External Dimensions (with hinges and door lock): Height 1995 mm, Width 1090 mm, Depth 1660 mm External Dimensions (without hinges and door lock): Height 1995 mm, Width 1000 mm, Depth 1660 mm Internal Dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Dodpfx Aerak Rmodmscn Cooling: 3.0 K/min Heat compensation max.: 2500 W Operating Data: Internal lighting: Halogen bulbs 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power: 7.8 kW Main fuse (on-site): 16 A slow-blow Sound pressure level: approx. 58 dB(A) (measured 1m in front, 1m height) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your safety as a buyer, please note the following information! The following steps are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data and details subject to change and errors excepted!) Feel free to contact us by phone for any further questions.

Sąlyga: labai geros būklės (naudotas), Here we offer a Weiss temperature chamber. Dcsdpfxerak S Ds Admen Weiss temperature test chamber with S!MCON / 32-controller, air-cooled (Refrigerant converted to R-452A) Control unit: Touch panel All control and operational commands can be executed on the touch panel simply by touching the function icons. Leveling feet To compensate for floor irregularities and ensure adequate ventilation for the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is fitted with access ports on both the right and left sides. These allow measuring cables and test equipment to be routed into the test chamber. Standard ports installed: R1: Nominal width 125 mm L1: Nominal width 50 mm Test chamber volume: approx. 600 liters External dimensions including hinges and door locks: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door locks: Height 1995 mm, Width 1000 mm, Depth 1660 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Technical data for temperature tests: Temperature range: -42 to +180 °C Temporal temperature deviation at center of useful space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min Thermal load compensation max. 2500 W Technical data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power: 7.8 kW Site circuit protection: 16 A slow-blow fuse Sound pressure level approx.: Measured at 1 m distance in front at 1 m height: 61 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your security as the buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors. All information is subject to confirmation!) If you have further questions, we will be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer a Weiss temperature test chamber. Weiss Temperature Test Chamber with S!MCON / 32-Control Unit, Water-Cooled (Refrigerant converted to R-452A) Control Panel »Touchpanel« All control and operation commands can be executed simply by touching the function symbols on the control panel “Touchpanel.” Adjustable Feet To compensate for uneven floors and ensure proper ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is fitted with feedthroughs on both the right and left sides, allowing measurement leads and testing equipment to be routed into the test space. Feedthroughs are included as standard equipment: R1: internal diameter 125 mm L1: internal diameter 50 mm Test Chamber Volume: approx. 335 liters Test Chamber Dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External Dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for Temperature Testing: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 3.2 K/min Cooling: 4.0 K/min Heat compensation max. 2300 W Operating Data: Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Rated power: 4.1 kW External fuse: 16 A slow-blow Sound pressure level (approx.): Measured at 1m distance from front, 1m height: 56 dB(A) Refrigerant: R-452A Dedpfx Aorbigfjdmjcn Weight: 515 kg Type: WT3-340/40 Important Information for Your Security as a Buyer! The following measures are carried out in advance for all test chambers offered by us: 1. Functional check and replacement of necessary components 2. If necessary, new filling with refrigerant in accordance with legal requirements 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photos) (Technical data subject to change and errors reserved!) For further questions, we are happy to assist you by phone.