Hidraulinis vienos kolonos presas

ZEULENRODA PYE 63 S 1 M

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Ffodpfx Abefxyhfs Set Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Sąlyga: naudotas, Gamybos metai: 2011, Funkcionalumas: ribota funkcionalumas, strypo praėjimas: 51 mm, bendras svoris: 6 000 kg, capacità barra 51 mm - tre torrette - tre assi Y - portautensili fissi/motorizzati - caricatore barre LNS Sprint 552 nuovo del 2011 - Controllo Fanuc Ffjdpfxewvvyre Ab Set

Gamybos metai: 1978, Sąlyga: naudotas, Pressure 100 t Throat depth 380 mm Stroke 400 mm Drive power 22 kW Ffedpfx Aelp U Dpjb Set Installation height 600 mm Ram area 600x500 mm Table area 720x600 mm Machine weight approx. 9 t Two-hand operation, Stroke and pressure cutoff, Pressing time

Sąlyga: naudotas, Gamybos metai: 1992, Technical details: Spindle diameter: 100 mm X travel: 1,500 mm Y travel: 1,450 mm Z axis: 930 mm W axis: 506 mm B axis (table): 360° CNC control: Heidenhain TNC 407 Tool holder: SK50 Spindle speed: 5 – 1,600 rpm / stepless Table load capacity: 4.0 t Table size: 1,100 x 1,400 mm Table rotation: 360° Feed rates X/Y/W/Z axis: 2 – 2,000 mm/min Rapid traverse X/Y/W/Z axis: 5,000 mm/min Total power requirement: 40 kW Electrical cabinet dimensions: 2,000 x 600 x 2,000 mm Machine dimensions (LxWxH): 4.9 x 3.7 x 3.8 m Machine weight approx.: 14 t CNC boring and milling machine with hydraulic unit Equipment: Measuring probe Fjdpfx Asu Idqbjb Soft electronic handwheel hydraulic weight compensation on Y axis universal milling head A wide range of accessories included – please inquire! In good condition.

Sąlyga: naudotas, Gamybos metai: 2010, Maximum turning diameter: 320 mm Turning length: 810 mm Control: MSX 701 Maximum spindle speed: 6,000 rpm Main spindle drive power: 22 / 18 kW Max. usable bar diameter: 52 mm C-axis: 0.001° Spindle nose: JIS A2-5 Collet chuck: 140 mm Maximum speed (sub spindle): 6,000 rpm Sub spindle drive power: 22 / 18 kW Max. usable bar diameter (sub spindle): 52 mm C-axis (sub spindle): 0.001° Spindle nose (sub spindle): JIS A2-5 Collet chuck (sub spindle): 140 mm Number of tool stations: 16 pos. Number of driven tool stations: 16 pos. Speed range - driven tools: max. 6,000 rpm Drive power - driven tools: 7.5 / 5.5 kW Y-axis travel: 110 mm Number of tool stations: 16 pos. Number of driven tool stations: 16 pos. Speed range - driven tools: max. 6,000 rpm Drive power - driven tools: 7.5 / 5.5 kW X-travel (1/2): 210 mm Y-travel: 110 mm Z-travel (1/2): 810 mm B-axis: 900 mm Total power requirement: 86 kVA Machine weight approx.: 8.1 t Space requirement approx.: 8.0 x 3.5 x 2.8 m Fsdpfsv E R E Aox Ab Ssft CNC turning and milling center MORI SEIKI - NZ 1500 T2Y - Main and sub spindle - 2 turrets, upper and lower - Y-axis - 2x 16 driven tool positions

Sąlyga: naudotas, Gamybos metai: 1997, Slėgis: 40 t Gylis nuo stulpo: 300 mm Eiga: 630 mm Įrengimo aukštis: 900 mm Stalo matmenys: 620 x 520 mm Anga stalelyje: 150 mm Stalo aukštis virš grindų: 600 mm Stūmoklio paviršius: 150 mm Bendras galios poreikis: apie 15,0 kW Mašinos svoris: apie 4,5 t Fedovuuckjpfx Ab Seft Užimama vieta: apie 1,0 x 1,9 x 3,0 m Leidžiama rankiniam detalių įdėjimui pagal CE standartą Su alyvos hidrauline pavara, valdymas pagal slėgį/laiką ir eigą, dviem rankomis valdoma Presą galima apžiūrėti veikiančią mūsų sandėlyje.

Sąlyga: naudotas, Gamybos metai: 1983, Technical details: Pressure: 160 t Fjdpsu Nfvuofx Ab Seft Throat depth: 360 mm Ram stroke - max.: 500 mm Distance table to ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through opening in table: 4x Ø 62 mm Ram speed, forward: 200 mm/s Ram speed, return: 125 mm/s Ram area: 450 x 850 mm Pin hole in ram: Ø 49 mm Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7200 kg Machine dimensions (LxWxH) approx.: 2.1 x 1.4 x 3.4 m Manual counter i.e. *

Sąlyga: geras (naudotas), Gamybos metai: 1991, Sheet width: 2500 mm Sheet thickness: 4 mm Cutting angle: 1.49° Strokes per minute: 40–80 Frame throat: 200 mm Number of hold-downs: 13 units Backgauge adjustment range: 5–1000 mm Table height: 750 mm Oil capacity: 85 l Required air pressure: 5 bar Ffedpfstq S T Nex Ab Sjt Machine weight approx.: 3600 kg

Sąlyga: naudotas, Gamybos metai: 1986, Spaudimas 160 t Išsikišimas 360 mm Eiga 500 mm Nusileidimo greitis 200 mm/sek. Pakėlimo greitis 125 mm/sek. Fjdpfsv Rgwxjx Ab Ssft Max. atstumas stalas - stūmoklis 1000 mm Stalo matmenys 900 x 630 mm Stūmoklio matmenys 850 x 450 mm Tvirtinimo kaiščio skersmuo x gylis 50 H7 / 85 mm Bendras energijos poreikis 17 kW Staklių svoris apytiksl. 7 t Užimamas plotas apytiksl. IxPxA 1,25 x 2,2 x 3,45 m

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, mašinos/transporto priemonės numeris: NEBR-4397, Here are the technical specifications of the offered machine: If the press does not exactly match your requirements, please request a customized offer tailored to your needs with just one click: Contact us for a tailored quotation. HIDROBRASIL manufactures presses exactly to your specifications at surprisingly affordable prices! ##### Technical Details Press force: 15 t Technology Stroke: 160 mm Machine weight: approx. 330 kg Ffodsfhcc Ispfx Ab Sot Oil tank: 10 l Robust machine body with solid welded steel construction, manufactured in accordance with DIN 8651 ##### Additional Information Low-maintenance and reliable due to sturdy engineering Cylinder features induction hardening and chrome plating Steel grade: Structural steel LCG ASTM A36 4 support feet with M30 holes for floor anchoring ##### Equipment / Features 1.5 T rotary punch attachment, mechanical, with locking device, spline shaft, and brake, and 220 mm travel Hydraulic hand pump, max. 15 T pressure and 160 mm stroke, with return spring Throat depth (back wall to center of tool holder): 280 mm Assembly table can be swiveled 180 degrees to the right, with 60 mm center hole, M12 T-slots Daylight opening between swing table and ram/rotary punch guide: 450 mm Daylight opening up to optional insert table: 650 mm and 800 mm Insert table with center hole, 60 mm, insertable, M12 T-slots, size 270x200 mm Height of the base with two storage compartments for insert table: 750 mm At the cylinder, a hardened pressure plate, 10 mm larger diameter than the cylinder Tool holder in cylinder head: M30 Pump lever operates downward Oil tank for 10 L hydraulic oil AW 46 Machine body finish: Blue, RAL 5012, textured paint Attachment finish: Anthracite, RAL 7021 Hydraulic single-column combination press, special model, 15 tons, manual operation (C-frame press, hydraulic press) ##### Looking for a custom-fit machine? Contact us for your individualized offer. Our hydraulic presses are manufactured in compliance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses surpass Canadian and European safety requirements, as they fully comply with the national Brazilian safety guideline NR 12, which is based on these standards. Our core competence is special-purpose machine construction and press automation. We offer made-to-measure hydraulic presses, press brakes, and guillotine shears at surprisingly competitive prices. For the hydraulics, we predominantly use components from leading European manufacturers.