CNC tekinimo ir frezavimo centras

Nakamura-Tome NTY3-51

Sąlyga: naudotas, Gamybos metai: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Number of tool stations: 35 Approx. machine weight: 3.3 t Space requirements (approx.): 2.11 x 1.2 x 1.89 m Hodpfx Afsvivx Nj Ijfb Used CNC sliding and fixed headstock turning/milling center with B-axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, up to 5-axis simultaneous machining B-axis: freely programmable from 0°–130° Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: main and counter spindle Number of linear slides: 2 Total number of tool stations: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding head and fixed head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear carriage with Y-axis Cross drilling at the rear Chip conveyor Fire extinguishing system FMB Minimag 20 bar feeder, year 2012 Approx. 7,200 operating hours

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Control: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Hfjdpfxevgxfyj Af Iob Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Through-spindle coolant Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel Machine is delivered with many tools

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 160 mm, Y ašies eiga: 762 mm, Z ašies eigos atstumas: 650 mm, greitas poslinkis X ašimi: 24 m/min, greitas poslinkis Y ašis: 24 m/min, greitasis eiga Z ašyje: 24 m/min, valdiklių gamintojas: FANUC, valdiklio modelis: FANUC 0i-MD, bendras aukštis: 3 170 mm, bendras ilgis: 5 500 mm, bendras plotis: 2 892 mm, stalo plotis: 760 mm, stalo ilgis: 2 160 mm, stalo apkrova: 1 800 kg, bendras svoris: 15 000 kg, veleno greitis (min.): 60 aps./min, veleno greitis (maks.): 12 000 aps./min, aušinimo skysčio tiekimas: 20 juosta, atstumas nuo stalo centro iki veleno galo: 800 mm, ašies variklio galia: 18 W, veleno nosis: ISO 40, ašies skaičius: 1, įrankių magazino lizdų skaičius: 40, įrankio ilgis: 300 mm, įrankio skersmuo: 80 mm, įrankio svoris: 8 g, įėjimo įtampa: 400 V, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Usato centro di lavoro verticale “DOOSAN mod. DNM 750L-” con CNC FANUC 0i-MD Hfjdpjw D Aynjfx Af Ijb

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 500 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 610 mm, nominali (akivaizdi) galia: 37 kVA, sukimo momentas: 236 Nm, valdiklių gamintojas: Heidenhain iTNC530, valdiklio modelis: iTNC530, stalo plotis: 700 mm, stalo ilgis: 1 700 mm, stalo apkrova: 700 kg, sukimosi greitis (maks.): 12 000 aps./min, bendras svoris: 9 000 kg, veleno greitis (maks.): 12 000 aps./min, veleno veikimo valandos: 16 580 h, ašies variklio galia: 37 W, ašies skaičius: 1, įrankių magazino lizdų skaičius: 48, Įranga: dokumentacija / vadovas, drožlių transporteris, 3-axis CNC machining center Heidenhain iTNC530 X travel: 1500 mm Y travel: 700 mm Z travel: 610 mm Table size: 1700 x 700 mm Tool holder: SK40 Tool magazine: 48 tools Hjdpfx Aevz Tyusf Isfb Rapid traverse: 36 m/min Table load capacity: 700 kg Through-spindle coolant: 20 bar Chip conveyor Handwheel

Sąlyga: naudotas, Gamybos metai: 2007, Didžiausias tekinimo skersmuo 42 / 140 mm Tekinimo ilgis 170 mm Valdymas Mitsubishi Meldas Sūkių dažnis 80-8.000 aps./min C ašis 0,001° Revolverinė galva (x kartų) 2x 12 (VDI 20) varoma Sūkių dažnis 45-4.500 aps./min Velenas 1 kW Perėmimo stotis 42 mm Sūkių dažnis 60-6.000 aps./min C ašis 0,001° Valdomų ašių skaičius 8 Griebtuvo įrenginys 48 DIN 6343 Darbo valandos 10 769 h Drožlių transporterio sistema taip / yes, gamybos metai 2018 Bendras galios poreikis 7,5 / 11 kW Hedpfevyli Eex Af Isfb Staklių svoris apie 3,3 t Užimamas plotas apie 2,4 x 1,6 x 2,2 m CNC tekinimo-frezavimo staklės CITIZEN BOLEY BE 42, pagaminta 2007 m. Simultaniškas darbas su 7 ašimis ant pagrindinio ir perėmimo velenų Labai gera būklė, darbo valandos 21 999 h (2024 m. rugsėjis) Priedai: # įvairūs įrankių laikikliai: 5x ašinių varomų įrankių laikikliai # Griebtuvų korpusas spaudimo griebtuvams, tipas 173E # Papildomas aušinimo skysčio šaldytuvas # Knoll drožlių transporterio sistema, gamybos metai 2018 Boley BE 42 parduodama be strypų padavimo magazino. Yra sąsaja. Visiškas baterijos pakeitimas atliktas 2025-12-22

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2017, veikimo valandos: 132 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20731, X ašies eiga: 500 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 300 mm, greitas poslinkis X ašimi: 90 m/min, greitas poslinkis Y ašis: 90 m/min, greitasis eiga Z ašyje: 90 m/min, nominali (akivaizdi) galia: 35 kVA, valdiklių gamintojas: Fanuc 31I, veleno greitis (maks.): 42 000 aps./min, veleno veikimo valandos: 132 h, aušinimo skysčio tiekimas: 20 juosta, ašies variklio galia: 15 W, veleno nosis: HSK E40, įėjimo įtampa: 415 V, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Die Maschine befindet sich in einwandfreiem Zustand. Die Bearbeitungsgenauigkeit beträgt +/-0,0015 mm (gemessen mit Zeiss Micura). Die Maschine ist mit einem Renishaw OMP400 sowie einem BLUM Pico zur Werkstück- und Werkzeugvermessung ausgestattet. Die Wiederholgenauigkeit liegt bei +/-0,001 mm. Hochgeschwindigkeits- und Hochgenauigkeitsoptionen auf Fanuc vorhanden. Die Maschine kann unter Strom besichtigt werden. Hsdpfxevcfi Dj Af Iefb

Sąlyga: geras (naudotas), Gamybos metai: 1999, Ranka parodytos dalys nepridedamos. Hfsdjwbz Tuspfx Af Ijb

Sąlyga: naudotas, Gamybos metai: 2000, Technical details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Turning length: 610 mm Cross travel (X-axis): 160 mm Longitudinal travel (Z-axis): 610 mm CNC control: Siemens 810D Spindle speed: 1 – 6300 rpm, stepless Spindle torque: 86 Nm Spindle bore: Ø 42 mm Spindle nose diameter at front bearing: Ø 80 mm Feed drive AC: X/Z: 5000 / 7000 N Rapid traverse X/Z: 16 / 20 m/min Tool turret – number of stations: 12 / VDI 30 Tailstock quill taper: MK4 Tailstock stroke: 500 mm (travel) Main spindle power: 7.5 kW (100% duty cycle = 11 kW) Electrical configuration – voltage/frequency: 3/PE ~ 400V and 50/60Hz Total power requirement: 20 kVA (11 kW) Machine weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 2.1 m The CNC lathe is equipped with a C-axis. Distance main spindle – tailstock: 805 mm Hydraulic power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Tool turret (12 positions available for driven tools) Currently, 8 tool holders are installed in the magazine, 4 of which are collet holders Hfjdpfxou Ixwis Af Ijb Coolant system, coolant supply through turret Control cabinet with cooling, Rittal Type SK3393100 Workpiece collection tray Machine lighting Accessories: 1x driven tool as per description.

Sąlyga: naudotas, Gamybos metai: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6 / 3.5 m Photos show identical machine with centre height 225 mm Base machine: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard equipment: - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - B-axis infinitely variable, high-resolution - Marposs measuring system for tool measurement - Active longitudinal positioning - GAP control on T1 and T2 by ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO, integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt driven Options available at extra cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm with integrated GAP sensor (lead time applies) - CNC-controlled C-axis - Non-circular (polygon) grinding - Hydrostatic lead screw in X - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Hsdpfx Aeuxfucjf Iofb Further options available on request Mechanical overhaul: - Complete machine overhauled in accordance with Kellenberger test protocol - New easy-maintenance enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDER CONTROL with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic license and various optional modules depending on the machine’s equipment. Basic software features: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal cylindrical oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zero setting - Wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressing units - Corrections - Z-position measurement (probe required) - GAP contact (touching device required) OPTIONS available at extra cost: Profile plunge grinding software: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single- and multi-start external and internal thread grinding with profile dressed on the wheel - Dressing of single- and multi-rib wheels - Flank angle freely selectable Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-round plunge grinding: - External and internal non-round oscillation grinding Non-round grinding software: Precondition for non-round grinding is equipping the workpiece spindle with a high-resolution rotary encoder to enable operation as a C-axis. The non-round...

Sąlyga: naudotas, TECHNICAL SPECIFICATIONS - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 [mm] Hfjdpfxsuha U Ho Af Isb - Max. machining length: 195 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 8.2 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 25.4 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 8.2 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 5,000 [rpm] TOOL HOLDER 2 - Number of positions: 8 SUB MACHINING - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 7,500 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 2,912 x 1,300 [mm] - Machine height: 1,720 [mm] - Machine weight: 2,400 [kg] MACHINE HOURS - Power-on hours: 44,140 [hrs] - Operating hours: 28,118 [hrs] - Spindle hours: 15,281 [hrs] EQUIPMENT - CNC control: Fanuc 31i-B - 3-color status light tower - Driven tool motorization at: S11, S51 - Powered guide bushing - Part catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank: KNOLL KF 200/1200 * with high-pressure pump - Bar feeder: Tornos Robobar SBF 326 - Fire extinguishing system * NB: Functionality not guaranteed. Must be checked by a qualified company appointed by the buyer.