Svirtinis grandininis keltuvas, 30 vnt.

YALE 750-3200 kg

Sąlyga: paruoštas naudoti (naudotas), Technische Details: Geschwindigkeit - 130 m/min, Baujahr - 2006, Auslauftisch - 6 m, Drahtdurchmesserbereich 4-12 mm. Podpfotndgpsx Af Nsgg

Gamybos metai: 2006, Sąlyga: geras (naudotas), Power generator, emergency power generator, generator set, unit, current generator, power unit, emergency generator - Soundproofed - Output: 7.0 kVA 50 Hz - Petrol engine: Honda Psdpfx Aecgan Asf Njgg - 2x: Schuko 230 Volt - 1x: CEE 380 Volt socket - 1x: charging cable socket 12 Volt - Unit dimensions: 590/780/H750 mm - Weight: 136 kg

Sąlyga: naudotas, Gamybos metai: 1977, Pressure: 250 t Stroke: 40 - 190 mm Stroke rate: 40 /min Throat depth: 500 mm Clearance between frame sides: 1050 mm Installation height: 615 mm Table size: 1380 x 880 mm Pedjvuuaijpfx Af Njgg Pass-through opening in table: 450 mm Table height above floor: 800 mm Ram area: 1200 x 800 mm Ram adjustment: 125 mm Drive power: 22.0 kW Weight: 24.0 t Required floor space approx. 2.0 x 2.5 x 3.95 m (L x W x H) Approved for manual feeding operations in compliance with German accident prevention regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, clamping plate, two-hand control.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, bendras svoris: 35 000 kg, spaudimo jėga: 250 t, įvesties srovės tipas: trifazis, galia: 30 kW (40,79 AG), perforavimo jėga: 250 t, įėjimo įtampa: 200 V, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Pgjdpou Dxb Tofx Af Njg Manufacturer: AIDA Model: NC2-250(1) Press Force: 160 t Year of Manufacture: approx. 1991 Stroke Length: 170 mm Die Height (adjustable): 280–400 mm Table Dimensions: 2700 x 760 mm Ram Dimensions: 2100 x 700 mm Electrical Supply: 3x200V (!!), 30 kW – Japanese standard Net Weight: 35,000 kg Dimensions: 2760 x 2800 x 3980 mm Automatic lubrication system. Automatic cutting oil dosing – RAZIOL EST-02 Optionally available with decoiler and straightening machine.

Sąlyga: naudotas, Technical Details: Grinding length: 12,000 mm Pjdpswc A Snsfx Af Njgg Grinding width: 2,800 mm Workpiece height: 2,510 mm Max. workpiece weight: 24,000 kg Table surface: 11,990 x 2,500 mm Passage between columns: 2,820 mm Crossrail adjustment: 2,510 mm Table feed rate: 1 – 40 m/min Total power requirement: 110 kW Machine weight approx.: 151 t Space requirements approx.: 32.5 x 9 x 6.73 m The machine is in very good condition for high-precision grinding! In 2022, mechanical components were overhauled by WALDRICH COBURG at a cost of approx. EUR 600,000. Equipped with CNC control SIEMENS 840 D 1 universal grinding support, 22 kW Swiveling grinding spindle +/- 110° Peripheral grinding wheel dimensions: dia. 700 x 130 mm Vertical adjustment: 1,000 mm With dressing device 1 peripheral grinding support, 30 kW Grinding wheel dimensions: dia. 600 x 150 mm Vertical adjustment: 230 mm With dressing device Coolant and filtration unit Various grinding wheel mounts

Sąlyga: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Grinding wheel: 508x254 (305) mm, regulating wheel: 330x254 (305) mm, regulating wheel speed: 0–115 rpm, grinding wheel peripheral speed: 45 m/s, grinding diameter: 2–150 mm, grinding wheel drive: 45 kW, machine weight: 6.5 t, required installation space: approx. 3.0x1.5 m. Pjdpfouy Ifgsx Af Njgg The machine will be fitted with a new Siemens S7 control system including new operator panel before sale. The dressing spindle (SS) is electrically actuated via a servomotor. The machine will be thoroughly inspected, with defective parts repaired or replaced. Various options available (coolant system, infeed/outfeed, workpiece guides, etc.).

Gamybos metai: 1985, Sąlyga: naudotas, Workpiece diameter: 25–90 mm Thread length: 3,000 mm Thread pitch: 2–16 mm Total power requirement: 25 kW Machine weight approx.: 10.5 t Space requirement approx.: m O F F E R We can offer you the following, subject to prior sale and errors excepted, ex stock without obligation. WALDRICH COBURG Whirling machine / peeling machine for the production of threads, worms, ball screws or similar components Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 – 90 mm Max. thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Pitch angle max. up to Ø 55 mm: 15° Pitch angle max. descending up to Ø 90 mm: 8° Whirling head speed, stepless: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore diameter of clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive approx.: 25 kW – 380 V – 50 Hz Weight: approx. 10,500 kg Accessories / special features: • Robust whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests, integrated with prism guides. Manual thread depth adjustment and optical pitch angle setting on the support. • Powered tool head, normally equipped with 4 tools: 2 roughing tools, 1 flank tool, 1 deburring tool. • Workpiece speeds and pitch feed are finely adjustable using change gears. Separate rapid traverse for resetting the whirling slide. • Simple indexing unit for whirling multi-start threads. • Additional setup for whirling threads longer than the centre distance with intermediate support. • For correcting lead-screw errors, thermal expansion of the workpiece, or errors during additional setups, the machine is equipped with a compensation device. This enables both an electronically programmed compensation of the lead-screw as well as workpiece-specific linear compensation using a wedge system. • Motorized tailstock adjustment with automatic stop by contact pressure sensor. • Comprehensive accessories including cutting tools, toolholders, collets, accessory parts, setting devices, gauges, and operating tools. • Central lubrication, coolant system, separate control cabinet, operating manuals. The machine is suitable for roughing and finishing of single and multi-start right- and left-hand threads, worms, ball screws or similar workpieces! Pedpfxjtzdyzo Af Njgg

Sąlyga: naudotas, Gamybos metai: 1988, veikimo valandos: 1 h, mašinos/transporto priemonės numeris: V 516, bendras plotis: 2 000 mm, bendras ilgis: 7 000 mm, bendras aukštis: 1 800 mm, darbinis slėgis: 300 juosta, spaudimo jėga: 90 t, aliuminio lakšto storis (maks.): 5 mm, galia: 11 kW (14,96 AG), tuščias svoris: 16 000 kg, pjovimo jėga: 90 t, paskutinio kapitalinio remonto metai: 2025, Package dimensions: 400x400 mm Pressing force, stage 1: 900 kN Pressing force, stage 2: 900 kN Steel throughput: 2,500–3,500 kg/h Aluminum throughput: 2,000–3,000 kg/h Drive power: 11 kW Pgjdolhqd Ropfx Af Nsg Footprint: 7 x 2 x 2.5 m Machine weight: 16 t With wheels or with oil drip tray Location: Austria Available from: 30/01/2026

Sąlyga: labai geros būklės (naudotas), Current gauge (track width) approx. 25.0 m Outreach: - Fixed support usable (possible)/total (possible) max. approx. 18.5 (21.5)/22.0 (25.0) m - Articulated support usable/total max. approx. 12.5/16.5 m Lifting height under spreader current/possible approx. 11.3/14.0 m Pgodpfx Afed N D U Ds Neg Manufacturer/refurbishment: TAKRAF/TEICHMANN Refurbished: 2019

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2017, Wheel diameter – max. 100 mm Wheel width 26 mm Module – max. 3 Module – min. 0.1 Control system Siemens 840 D SL Operating hours 9,598 h Total power requirement 45 kW Machine weight approx. 7 t Space requirement approx. 4x3x2.5 m Gleason 100S gear shaping machine For the production of internal and external cylindrical gears and other regularly recurring profiles and forms on the circumference of cylindrical workpieces, as well as for the production of profiles in individual part operations. Technical data: Nominal workpiece diameter 100 mm Maximum swing diameter 150 mm Nominal machine module approx. 3 mm (reference value depending on the machining task) Shaping spindle stroke rate range 0 - 3,000 strokes/min Adjustment range for stroke position (manual) 20 mm Maximum gear width 26 mm Smallest lead height of the hydrostatic inclined guide 400 mm Minimum/maximum distance between tool and workpiece axis -20/+180 mm Column tilt range (manual) -1/+11° Pgedpjv Ehbbofx Af Nsg Tool holder (manual clamping) HSK-D63 (hollow shank taper DIN 69063) Machine weight approx. 7,000 kg with robotic cell