Įpurškimo liejimo mašina

Wittmann Battenfeld EcoPower 110/130

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 13 450 mm, bendras plotis: 4 135 mm, bendras ilgis: 3 092 mm, keliamoji galia vienai sandėliavimo sekcijai: 400 kg, įėjimo įtampa: 400 V, keliamoji galia: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13,450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of manufacture: 2016 Total load capacity: 2 x 30,000 kg Load per tray: 400 kg (evenly distributed) Tray dimensions: 3625 x 815 mm Number of trays (approx.): 91 units Touchscreen: 15.6 inch Shuttle dimensions (W x D x H): 4135 x 3092 x 13,450 mm Power supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid while the system is still available Technical specifications for each Logimat: – Maximum total capacity of Schäfer Logimat: 2 x 30,000 kg – Maximum tray capacity (approx.): 91 trays, 400 kg each, evenly distributed – Tray dimensions: 3625 x 815 x 100 mm – Tray dead weight: 70 kg – Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm – System footprint (approx.): 12.8 m² – Capacity with 91 trays: approx. 269 m², each tray approx. 2.95 m² – Average tray retrieval time: 26 sec – Maximum tray retrieval time: 26 sec – Average tray exchange time: 51 sec – Maximum tray exchange time: 72 sec – Machine weight without trays: 5200 kg – Equipped with LogiTilt Fsdjru A Atepfx Admogk – Equipped with LogiPointer – Equipped with LogiGate – Equipped with LogiStainless Machines have been professionally dismantled and can be reassembled by the same technicians if required. Photos and videos of operation and dismantling available upon request by email. Price: special export price Price: excl. VAT Availability: in stock We have 3 Schäfer Logimat units in stock Machinehandel De Leeuw BV specializes in used paternoster systems, including Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Sąlyga: naudotas, Gamybos metai: 2007, No. 3177 Grecon Dimter OptiCut 200-1 Optimizing Cross-Cut System Fodpfx Adeu Atmuemogk Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: - Infeed lengths min./max. 3000 - 5000 mm - Infeed widths min./max. 80 - 200 mm - Infeed thicknesses min./max. 38 - 80 mm - Maximum wood cross-section: 200 x 50 mm - Final wood length min./max. 700 - 1000 mm - Average number of cuts per board: 5 - Types of wood: softwood or hardwood Machine performance: - Max. feed speed: 180 m/min, infinitely variable - Time per cutting operation incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt, positioned before the saw - Length: 1.5 m, coupled with saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version - Equipped with integrated length measuring wheel and built-in waste air blast mechanism - Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control - The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station - With drive unit, without ejector - Belt length approx. 1.5 m Machine already dismantled and stored - The infeed table was not used by the previous owner. Two feed rollers were mounted for material infeed. The feed table is available, only the rubber belt is missing. For sale on behalf of customer, ex-site Austria, without transport and assembly - Errors in description and price are reserved - Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as-is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and previous owner, without guarantee - Subject to prior sale - For used machines, any guarantee/liability is excluded; 'sold as inspected' applies - Photos and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, veikimo valandos: 56 000 h, Parduodama Arburg 570-2000-800 liejimo mašina, 2008 metų. Labai geros techninės ir vizualinės būklės, labai tyliai veikia, nėra jokio alyvos nuotėkio. Selogic valdymas. Bimetalinis liejimo blokas, 45 mm diametras. 1 x oras, 2 x hidraulinis branduolys, roboto išvestis. Mašina parduodama be medžiagos ir spalvos dozatoriaus. Fgedpfjukirbox Admjk

Gamybos metai: 2003, Sąlyga: paruoštas naudoti (naudotas), Seven Arburg injection molding machines are available: 1) Arburg 320C 600-250, Year: 2001, Operating hours: 83,365h, Clamping force: 600kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. Fedpfx Adstyyn Homjgk 2) Arburg 420C 1000-250, Year: 2001, Operating hours: 90,769h, Clamping force: 1000kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 750mm, Daylight between platens: 750mm, Platen dimensions X/Y: 570mm/570mm, Tie bar spacing: 420mm/420mm, Core pulls: 2, Machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, Year: 1999, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 1, Temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, Year: 2000, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 125mm/110mm, Max. opening stroke: 350mm, Daylight between platens: 350mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 1, Temperature control units: 6. 5) Arburg 220C 250-60, Year: 2001, Operating hours: 86,595h, Clamping force: 250kN, Screw diameter: 22mm, Shot weight: 27g, Max. injection pressure: 2340bar, Injection volume: 30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6. 6) Arburg 270C 300-100, Year: 2007, Operating hours: 59,885h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, Year: 2001, Operating hours: 57,504h, Clamping force: 250kN, Screw diameter: 18mm/22mm, Shot weight: 18g/27g, Max. injection pressure: 2500bar/2340bar, Injection volume: 20cm³/30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6, Machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. Inspection on site is possible.

Gamybos metai: 1996, veikimo valandos: 24 222 h, Sąlyga: geras (naudotas), This injection moulding machine from Dr. Boy is located at Plastima Used Machinery in machine storage. The machine dates from 1996 and has relatively low operating hours for its age. – Brand: Dr. Boy – Model: 80M – Year of manufacture: 1996 – Screw diameter: 42 mm – Shot volume: 200 cm³ – Clamping force: 80T Fgsdpfxopwh Akj Admsk – Operating hours: 24,222

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, centro aukštis: 100 mm, šlifavimo disko skersmuo: 350 mm, ruošinio svoris tarp centrų: 20 000 g, atstumas tarp centrų: 400 mm, įvesties srovės tipas: trifazis, šlifavimo ratuko plotis: 30 mm, veleno greitis (maks.): 1 200 aps./min, veleno greitis (min.): 30 aps./min, padavimo ilgis Z ašis: 420 mm, šlifavimo veleno variklio galia: 3 000 W, bendras svoris: 1 600 kg, paskutinio kapitalinio remonto metai: 2025, įėjimo įtampa: 400 V, Cilindrinis šlifuoklis STUDER S 20 Favorit TECHNINĖS CHARAKTERISTIKOS: Pagaminimo metai: 1997 Atstumas tarp centrų: 400 mm Centrų aukštis: 100 mm Z ašies eiga: 420 mm Darbinis padavimo greitis Z ašyje: 100 – 3500 mm/min Stalo pasukimo kampas: 0 – 30° Šlifavimo veleno variklio galia: 3 kW Didžiausias šlifavimo disko skersmuo: 350 mm Didžiausias šlifavimo disko plotis: 30 mm Šlifavimo disko tvirtinimo skersmuo: 127 mm Ruoinio veleno galas: W20 Ruoinio veleno min. greitis: 30 aps./min Ruoinio veleno maks. greitis: 1200 aps./min Maks. detalės masė laikiklyje tarp centrų: 20 kg Ruoinio pasukimo diapazonas: 0° / +90° Fsdpfx Adowt Tgwomjgk Ruoinio veleno galia: 0,5 kW Uždėjimo centras: MT2 Galvutės sustūmos eiga: 20 mm Maitinimo įtampa: 400 V Bendras reikalingas galingumas: 8 kVA Staklių matmenys: 2350 x 1480 mm Svoris: 1600 kg KOMPLEKTACIJOJE: x1 popierinės juostos filtravimo įrenginys x1 SONY LH 31A dviejų ašių skaitmeninė padėties rodymo sistema x1 WALDMANN LED lempa x1 vidinio šlifavimo velenuas tipas 82060B, greičiai: 11 900–28 400 aps./min x1 SENSITRON kontaktinis indikatorius x1 šlifavimo disko balansavimo įrenginys x1 šlifavimo disko balansavimo velenas x1 trijų žandų griebtuvas FN Ø100 mm MT3 x1 magnetinis griebtuvas Ø160 mm MT3 x1 stalas su disko apdorojimo įtaisu x37 W20 griebtuvai x2 pusiniai centrai x2 pilni centrai x1 bukas centras x1 skriemulys Ø105 mm vidinio šlifavimo velenui x2 išorinio šlifavimo diskų flanšai x1 TYROLIT 494271 šlifavimo diskas išoriniam šlifavimui Įvairūs vidiniai šlifavimo diskai x4 ruoinių laikikliai Įvairūs kiti priedai Staklės įjungtos demonstruojamos mūsų patalpose tik iš anksto susitarus. Kaina pagal užklausimą, krovimas į transporto priemonę įskaičiuotas. Galimas pristatymas visame pasaulyje. Šio puslapio informacija pateikta geriausiomis mūsų žiniomis, tačiau jos tikslumas negarantuojamas. Panašūs įrenginiai: Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Vidinis ir išorinis šlifavimas (ID/OD). Taip pat galite domėtis paviršiaus šlifuokliu, tekinimo staklėmis, apdirbimo centru, frezavimo staklėmis.

Sąlyga: naudotas, Gamybos metai: 2001, spaudimo jėga: 60 kN, darbinio tūrio: 224 cm³, įpurškimo slėgis: 2 224 juosta, bendras svoris: 3 350 kg, darbo valandos: 60 790 h, sraigtinio konvejerio skersmuo: 18 mm, Min. mould installation height: 15 mm_Max. platen clearance: 575+ mm Payment terms: 100% before collection of the machine, strictly net Manufacturer: Battenfeld Model: BA600-50CDC Condition: Refurbished Operating hours: 60,790 CLAMPING UNIT: - Clamping force: 60 t Opening stroke: 425 mm Min. mould installation height: 350 mm Max. mould installation height: - Tie bar spacing (h x v): 320 x 320 mm Platen dimensions (h x v): 490 x 490 mm Centres (nozzle/ejector plate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Shot weight in polystyrene: 20.4 g Stroke volume: 22.4 cm³ Injection pressure: 2,224 bar CONTROL: Unilog 4B Display languages: DE Operating manual: DE EQUIPMENT: - Fgjdsh Tk Rvopfx Admjk Core pulls: ! Air valves: - Hot runner controllers: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating power: 3.6 kW Pump drive power: 11.0 kW Total connected load: Motor + heater Total weight: 3,350 kg Dimensions L x W x H: 4.0 x 1.5 x 2.1 m

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Used straightening press in very good condition for sale. This universal and robust Stierli straightening press is equipped with a 5m straightening beam. It is capable of processing beams up to HEA-600 and HEB-600 (with S-235). The machine is operated with Stierli’s proven stroke fine adjustment control, making it very easy to use and enabling fast, precise straightening and bending operations. Fsdpfx Adeufhzvomogk Additional options can be added upon request, such as powered roller conveyors, NC control, laser measurement, etc. (Note: The photo does not show the original machine.)

Sąlyga: naudotas, Gamybos metai: 2006, Technical Details: X-axis travel: 800 mm y-axis travel: 800 mm z-axis travel: 800 mm Spindle speed: 12,000 rpm Tool holder: SK 50 CNC control: SIEMENS 840D shopmill Tool magazine capacity: 240 positions Pallet size: 630 x 630 mm Spindle: 52 kW / 430 Nm Total power requirement: 87 kVA Machine weight approx.: 15 t Fsdpfxepumdce Admjgk Horizontal machining center with pallet storage, NC rotary table, 2-station pallet changer, IKZ (internal coolant supply) 40 bar, Prepared for Renishaw MP 10 infrared measuring probe, probe not included, Mechanical tool breakage detection, MQL (minimum quantity lubrication), Through-spindle air blast, Electrical oil mist extraction, Electronic handwheel, TRANSMIT function, Precision package, BA 4, Laminated safety glass (right door), Including FASTEMS FPC 1000 pallet system for a total of 14 pallets, including loading station, stacker crane, master computer and 10 pallets. Approx. 98,500 hours main switch ON Approx. 45,500 spindle hours

Gamybos metai: 1999, Sąlyga: labai geros būklės (naudotas), INJECTION MOLDING MACHINE KRAUSS-MAFFEI 150-700 C1 Year: 1999 Screw diameter: 55 mm In excellent condition, still in operation Fjdpoh S Dncofx Admogk