Keturios šoninės obliavimo staklės

WEINIG Variomat_Multifunktionstisch

Sąlyga: naudotas, Number of spindles: 6 pcs. Working width: 240 mm Planing height: 200 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 6-36 m/min Dimensions (L x W x H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window production ----- The machine has been cleaned and functionally tested! Technical data: ----- Maximum working width: 240 mm Maximum working height: 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Tedpfxjvnv Uzj Ag Ref Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd HSK tool holder ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3rd HSK tool holder ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Additional technical features: ----- 2 feed units after the upper spindles to reduce the axle spacing from 620 mm to 450 mm Air-cushion lubrication on the worktable 2 x milling units with belt drive and quick-change HSK 85 system in positions 2 – 3 Working height of 200 mm instead of 120 mm 5 x electronic horizontal positioning positions (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) positions (3 – 4 – 5) Mobile 10 control PRL equipment for cutting out the glazing bead on 2nd upper horizontal spindle Machine is supplied without processing tools (Technical data according to manufacturer's information—no guarantee!)

Sąlyga: naujas, Gamybos metai: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Swivel adjustment with hand crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Todpfx Agjizkhvj Rof Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction connection: 100 mm Roller conveyor length: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Sąlyga: naudotas, Gamybos metai: 2014, Number of spindles: 5 pcs. Working width: 230 mm Planing height: 120 mm Surface table length: 2,500 mm Feed motor: 4 kW Feed speed: 5-30 m/min Control: Memory function Weinig Powermat 600 Compact ----- Machine is cleaned and fully inspected. Brief summary: ----- - 5 spindles - Powerful motors - Left and top spindle controlled for width and height Detailed description: ----- Technical data: Working width: 20-230 mm Working height: 10-120 mm Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 125 - 145 mm Tool circle diameter with rebate cutter: 130 - 160 mm Axial adjustment range: 5 mm Rebate device MarathonCoatin for table insert in front of the 1st lower tool holder Electronic digital readout for radial adjustment 2nd spindle - right ----- Motor with brake: 11.0 kW Shared motor with left tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter 40 mm below table level: 93 - 200 mm Tool circle diameter 55 mm below table level: 93 - 180 mm Tool circle diameter for straight knife cutterheads max.: 163 mm Max. tool diameter behind fence line: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm 3rd spindle - left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter 40 mm below table level: 93 - 200 mm Tool circle diameter 55 mm below table level: 93 - 180 mm Tool circle diameter for straight knife cutterheads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Radial spindle CNC-controlled 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 93 - 200 mm Tool circle diameter for straight knife cutterheads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Radial spindle CNC-controlled Todpfswzmu Rex Ag Rsf Divided pressure shoe in front of the top tool holder, adjustable to tool circle diameter and can be swung clear of the tool, spring-loaded. Pressure shoe before and outfeed after top spindle with electronic digital readouts, integrated in the memory function or PowerCom 5th spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 93 - 200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller before 1st lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment range of feed rollers relative to left tool holder, axial 35 mm Machine electrics ----- Operating voltage: 400 V (voltage range 380 - 420 Volts), 50 Hz. All spindles IE 2 version Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN60204, IEC-204-1. Other electrical standards are not taken into account. Mach...

Sąlyga: naujas, Įranga: apšvietimas, Take your painting process to the next level – with mobile convenience. Mobile spray booths in container design for painting and coating various objects. They are specifically designed for mobility, making them easy to transport and set up at different job sites. The booth is typically equipped with a ventilation system to ensure air quality, lighting, and a filtration system to prevent the escape of paint overspray. The ventilation system ensures that fumes and particles released during painting are contained within the booth, eliminating any risk to the surrounding environment. Tedpoun Shgofx Ag Ref Mobile spray booths are a practical and flexible solution for companies that require a relocatable and effective painting system that can be transported from one job site to another. Overview of design and features Our mobile 20-foot Sapi spray containers are made with a robust steel frame and welded wall and ceiling panels. Inside, we can add special aids such as cranes or lifting devices. The floor is constructed from checker plate. Both doors feature ventilation grilles fitted with fine-pore filter mats. For safety, one door is designed as an emergency exit and includes a viewing window. It is important to note that these are not simply converted shipping containers! We manufacture all of our containers from the ground up ourselves. We use only the most durable materials that meet all requirements and have been safety tested and proven. Standard shipping containers would not meet the required safety standards. Paint extraction system in the mobile spray container The paint mist extraction wall for overspray separation is positioned in front of the rear wall and is equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, folded with baffles, including various suspension and fastening elements for filter mounting. The powerful and EX-protected extraction fan with drive motor is installed on a console on the outside of the rear wall of the container. Next-generation mobile spray booths: Meeting EU requirements and advancing coating solutions The new generation of mobile spray booths must comply with the highest EU standards. The introduction of new paint systems such as water-based coatings, polyurethane resins, epoxy zinc dust paints or epoxy iron mica coatings imposes stricter requirements on existing spray booths. This is why we have developed a new and unique mobile spray booth for the next generation of coating solutions. An important criterion is the transport of workpieces for painting and further processing steps. Do you need more information? Our engineers can provide expert advice and support. Whether you require dry or wet overspray separation, air humidification or air drying, low-temperature condensation drying or hot air drying, or pretreatment of workpieces by high-pressure washing with a recirculating water system, compressed air blasting, or centrifugal wheel blasting technology.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2018, Double Arbor Multiblade Saw model SQUALO 420 2x75kW – Completely Refurbished with Warranty – €65,000.00 Year 2018 Technical Data Sheet Infeed roller width: 420 mm Outfeed roller width: 520 mm Maximum saw unit width: 400 mm Maximum cutting height: 200 mm Minimum working length: 800 mm Maximum passage width: 700 mm Saw shaft diameter: 60 mm Maximum circular blade diameter: 370 mm Blade bore diameter: 80 mm Tsdpjhrdxiefx Ag Rsf Saw shaft speed: 3,800 rpm Feed speed by rollers: 4–36 m/min Weight: 5,500 – 6,000 kg Overall dimensions: 2500 x 2260 x 2000h mm

Sąlyga: naudotas, Gamybos metai: 2012, bendras plotis: 1 750 mm, bendras ilgis: 1 800 mm, bendras aukštis: 1 600 mm, Svoris: 1.900 kg Kaina: pagal užklausimą Tjdpfx Agswniide Rjf - Pagaminimo metai: 2012 - Dokumentacija prieinama: Taip - CE žymėjimas yra: Taip - CE sertifikatas yra: Ne - Serijos numeris: 12236 - Pjūklo disko skylės skersmuo [mm]: 650 - Transporterinės juostos variklio galia [kW]: 0,8 - Transporterinės juostos plotis [mm]: 350 - Įtampa [V]: 400 - Srovės suvartojimas [A]: 80 - Saugiklis [A]: 100 - Galia [kW]: 57,0 - Transportavimo matmenys: 1800mm x 1750mm x 1600mm (I x P x A) - Transportavimo svoris [kg]: 1900kg - Transporto paketai [vnt.]: 3 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/PVM skirtumo apmokestinimas: PVM atskaitomas verslui Pristatymas ir priėmimas mainais galimi bet kuriam pramonės sektoriui Yorick Diebels

Sąlyga: beveik kaip naujas (parodų įrenginys), 1 roller table, 3.0 m long x 0.77 m wide, equipped with 7 carrying rollers, pneumatic lifting alignment chain with worm gear and bellows cylinder, plus a wood transfer carriage with rubber turntable for single-person wood handling, and 2 foldable stop rollers for planks from the band saw that have already been edged on one side. 1 roller table, 3.5 m long x 0.77 m wide, with 8 carrying rollers, available with or without transfer carriage. Tsdpfxjt E Nw Ts Ag Rjf Other similar roller tables available.

Sąlyga: naudotas, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5–24 m/min Total power requirement: 27 kW Dimensions (L x W x H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig Four-Side Planer Profimat 23 Window Version with glazing bead cutting unit, alternatively usable as a grooving spindle ATS control and program control ----- Machine is currently being overhauled and function-tested Technical Data Summary (additional accessories, if included, upon request) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. Tedpfxou Su Hue Ag Ref > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle Arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically controlled up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatically controlled up/down Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Glazing bead cutting or usable as a grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package Combined control of right spindle and glazing bead discharge via manual selector switch on the control panel > Spindles with mechanical digital display Option: Used planer heads available (technical data as per manufacturer – no guarantee!)

Gamybos metai: 2004, Sąlyga: labai geros būklės (naudotas), Four-side planer - Maximum planing width: 23 cm - Maximum planing height: 16 cm Tedpfshlp D Nsx Ag Rsf - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 overhead transfer rollers in front of the bottom head, plus a roller device for short elements - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle.

Sąlyga: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW Tedpferigxyex Ag Rjf - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition