Keturpusis oblius WEINIG tipo Unimat 23 E

Weinig Unimat 23 E

Sąlyga: naudotas, Gamybos metai: 1999, Keturpusė obliavimo staklės Mažoji Unimat 23 E Pagaminimo metai: 1999 Serijos numeris: 88103 Padavimo greitis: 5/24 m/min Rušinės plotis min./maks.: 20/230 mm Rušinės aukštis min./maks.: 8/160 mm Veleno skersmuo: 40 mm Įvado stalo ilgis: 1950 mm Griovelių stalas 1. apatinis velenas: 5,5 kW 2. ir 3. dešinysis ir kairysis velenai: 11 kW 4. viršutinis velenas: 15 kW 5. viršutinis velenas: 11 kW 6. apatinis velenas: 5,5 kW Ijdpfx Aswnh Sqjfwea Bendra galia: 54 kW Iš viso 117 amperų. Saugiklis: 125 amperų. Transportavimo matmenys: 4200x2000x2100 mm (IxPxA), Svoris +/- 4500 kg. - Pagaminimo metai: 1999 - Dokumentacija prieinama: Ne - CE sertifikatas: Nėra - Serijos numeris: 88103 - Velenų kiekis [vnt.]: 5 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumo apmokestinimas: PVM atskaitomas verslininkams Pristatymas ir priėmimas galima bet kada viskam iš pramoninės srities Yorick Diebels

Sąlyga: beveik kaip naujas (naudotas), WEINIG Hydromat H30N, S/N 253-886, Year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system Ijdetynpxspfx Afwsa • Maximum working width: 300 mm • Maximum working height: 140 mm • Electronic, stepless feed, 12–120 m/min. • Feed motor: 22.0 kW • 1st spindle below: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW • 6th spindle top: 22.0 kW • 7th spindle below: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle below: 11.0 kW • All spindle motors with electronic brake • COMPLETELY NEW CUTTERHEAD SPINDLES • Spindle diameter: Ø 50 mm • Spindle speed: 6,000 rpm • 6 powered feed rollers in the table – hard-chromed • Spindles 1 + 6 + 7 + 8 + 9 with NEW counter bearings • Hydraulic counter bearing clamping • Spindles 2 + 3 + 8 + 9 with straight jointer • Spindles 4 + 6 pneumatic pressure • NEW feed rollers, D=170 mm • Hard-chromed table plates • Hard-chromed fences • Heavy-duty top pressure rollers – pneumatic • Heavy-duty side pressure rollers – pneumatic • Automatic table lubrication – NEW • Central lubrication points • NEW standalone control panel, 5 m cable • NEW standalone control cabinet, 5 m cable • Operating manual, spare parts list, and circuit diagram included + Many NEW spare parts/accessories Dimensions: • Total length: approx. 6,150 mm • Total width: approx. 2,160 mm • Machine weight: approx. 9,500 kg Power connection: • Total connected load: approx. 157 kW Condition: Machine as shown in photos – technically as-new Payment: Payable in full by bank transfer prior to loading Delivery time: By arrangement Delivery: EXW Inspection: Possible anytime by appointment Offers & inquiries only with complete company details Errors and prior sale excepted

Sąlyga: naudotas, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Jointer table length: 2000 mm Feed motor: 4 kW Feed speed: 5-24 m/min 1 WEINIG Planer and Moulder Unimat 23 E ----- 6 spindles (2 of which are right-hand), reinforced motors, 8,000 rpm, ATS control system Machine will be cleaned and function-tested prior to delivery Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle, bottom, 5.5 kW (motor replaced) ----- Diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 125 - 180 mm Rabbetting unit incl. tooling Hardened table insert in front of 1st bottom spindle 2nd spindle, right, 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, left ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of left spindle, incl. spring-loaded side roller pressure 4th spindle, right, 8.3 kW (motor replaced) ----- Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle, top, 7.5 kW ----- Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 200 mm Max. profiling depth: 35 mm Iedexz Hh Uopfx Afwea Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable to tool swing diameter and swivelling away from tool, spring-loaded 6th spindle, bottom, 4.0 kW ----- Diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 112 - 250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles - General ----- All profiling spindles with high concentricity. Lubrication points for axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed steplessly adjustable 5–24 m/min Infeed roller in front of 1st bottom tool, pneumatically controlled high/low Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Feed roller adjustment relative to left spindle, axial 35 mm Machine electrics ----- Operating voltage: 440 V (voltage range 380 - 420 Volt), 50 Hz Machine base, tables, and fences ----- Jointer table 2.0 m long (incl. straight edge) Manual Waxilit pump for table de-resining One powered rubber roller (spring-loaded in outfeed table) Two powered rollers in machine table, hardened Machine operation ----- Pressure shoe in front of top spindle with mechanical digital indicator Ejection after top spindle with mechanical digital indicator ATS/system, automatic 2-axis positioning for spindles no. 3 and 5 Min. working height: 12 mm Electric height adjustment for top spindles and feed Centralized lubrication points located at machine front Electronic digital displays at spindle 3 and 5 (axial), spindle 6 (radial), and spindle 4 (axial and radial) Safety and sound insulation ----- Full safety enclosure Easily high...

Sąlyga: geras (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, ašies skersmuo: 40 mm, darbinis plotis: 230 mm, X ašies padavimo greitis: 5 m/min, Y ašies padavimo greitis: 36 m/min, obliavimo plotis: 20 mm, aukščio reguliavimo tipas: elektrinis, obliavimo aukštis: 160 mm, darbinio aukščio: 8 mm, Įranga: kabina, variklio stabdis, Weinig Unimat 23 E 6-galvos obliavimo-frezavimo staklės. Apatinė galva – 10 AG Tvoros ir artima galva – 15 AG (bendras variklis) Pirmoji viršutinė galva – 15 AG Antroji viršutinė galva – 15 AG Antroji apatinė galva – 10 AG Veleno greitis – 6000 aps./min. Padavimo greitis – min/5 m/min, maks/36 m/min Isdpsv A Rpcsfx Afwja Darbinis plotis – min 20 mm, maks 230 mm Darbinis aukštis – min 8 mm, maks 160 mm Veleno skersmuo – 40 mm Įrenginys šiuo metu vis dar eksploatuojamas, apžiūra galima ir laukiama.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2011, Wide-belt sander DMC USK 1350 M3 – Made in Italy – Cross-belt unit (so-called 'sergeant') – Year of manufacture: 2011 – Electric and pneumatic ionizer TECHNICAL SPECIFICATIONS: Sanding width: 1350 mm Sanding height: 4–170 mm Minimum workpiece length: 365 mm Vacuum table Iedegr Er Sspfx Afwja 1st unit: Cross-belt (so-called 'sergeant') Motor power: 12 kW 2nd unit: Rubber roller Hardness: 95 Shore Diameter: 240 mm Motor power: 18.5 kW 3rd unit: Rubber roller Hardness: 55 Shore Roller diameter: 300 mm Motor power: 15 kW 4th unit: Pneumatic pad Motor power: 15 kW 5th unit – Cleaning brush – 2.2 kW 6th unit – Air blower Blower for the belt Pneumatic oscillation Feed speed: 2.5 – 18 m/min Pneumatic belt tensioning Electric height adjustment Extraction port diameters: 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm Transport dimensions (L/W/H): 370 / 250 / 250 cm Weight: 5000 kg

Sąlyga: labai geros būklės (naudotas), Keturių pusių obliavimo staklės WEINIG Unimat 23 E maksimali obliavimo plotis 230 mm, obliavimo aukštis 130 mm, 5 velenai, Rankinis obliavimo matmenų nustatymas, velenų išdėstymas: apatinis 7,5 kW; kairys ir dešinys – 11 kW; viršutinis 11 kW; apatinis 7,5 kW, varikliai su stabdžiais, veleno skersmuo 40 mm, Pilnai reguliuojami velenai, Įrenginys turi 4 traukiančius volus stalviršyje, tinka drėgnai medienai, padavimo sistema su kardano velenais, bepakopė reguliacija Įranga parduodama su galvutėmis, matomomis ant velenų, kardano velenai nesudilę, stalai nenudilę, veikia sklandžiai, be vibracijų ir drebėjimų, Isdpfoxvc Uajx Afwsa obliavimo staklės tvirtos, originalios, svoris apie 5 t. Labai gera būklė, viskas veikia.

Gamybos metai: 1997, Sąlyga: labai geros būklės (naudotas), Maximum workpiece width: 23 cm Maximum workpiece height: 18 cm 1 lower horizontal spindle 2 right vertical spindle 3 left vertical spindle 4 upper horizontal spindle Adjustable heads: up/down, right/left Spindle diameter: 40 mm Iodpfx Aok Dxraefwea Hydraulic side feed on the infeed table

Sąlyga: naudotas, Gamybos metai: 1997, Beam planer 260 x 160 mm, trailing chamfering unit on the upper spindle, air cushion table with two-axis control for left and upper spindle, factory-new control system (latest Weinig version) - Max. working width: 260 mm - Max. working height: 160 mm - Number of spindles: 6 1st spindle: bottom - Spindle diameter: 40 mm - Clamping length: 270 mm - Speed: 6000 rpm - Motor power: 11.0 kW 2nd spindle: right - Spindle diameter: 40 mm - Clamping length: 170 mm - Speed: 6000 rpm - Motor power: 11.0 kW (shared with left spindle) 3rd spindle: left - Spindle diameter: 40 mm - Clamping length: 170 mm - Speed: 6000 rpm 4th spindle: top - Spindle diameter: 40 mm - Clamping length: 270 mm - Speed: 6000 rpm - Motor power: 11.0 kW 5th spindle: bottom - Spindle diameter: 40 mm - Motor power: 11.0 kW - Speed: 6000 rpm - Clamping length: 270 mm 6th spindle: top, chamfering unit - Motor brakes: mechanical - Vertical adjustment of the upper spindle: electric - Optional with/without feed - Feed brake system: Yes - Feed speed, infinitely variable: 3 – 23 m/min - Feed roller pressure: pneumatic - Feed power: 4.0 kW - Feed drive: Cardan shaft - Lubrication pump: manual - Max. jointing depth: 10 mm - Jointing rebate cutter on jointer: Yes - Driven rollers in table: 1 - Control type: PLC control - Spindle position display: mechanical numeric indicator - Feed rollers before jointer: Yes - Air cushion table: three tracks - Central lubrication point: Yes Description: short infeed table 1050 mm with interior light Location: Nattheim Ijdpfewwwkhex Afwea

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Bendra informacija Staklių svoris: 3200 kg Šios WEINIG Unimat 23 E obliavimo staklės buvo pagamintos 1999 m., sukurtos efektyviam medienos obliavimui. Puikiai tinka medienos apdirbimo specialistams, siekiantiems padidinti gamybos našumą. Dėl išsamesnės informacijos susisiekite su mumis. Iedpfxsxn U Amo Afwsa Pritaikymo sritys: Obliavimas

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Parduodama keturpusė obliavimo staklė Weinig. Darbinis plotis: 230 mm, darbinis aukštis: 120 mm, padavimo greitis: 24 m/min, staklės matmenys I/P/A: apie 3500 mm/2000 mm/2000 mm, svoris: apie 3500 kg. Galima apžiūra vietoje. Isdpfx Afoxpw Uhewoa

Gamybos metai: 2002, Sąlyga: paruoštas naudoti (naudotas), Max. workpiece height: 280 mm, tool holder: HSK 63F, weight: 6.5 t, inspection is possible. Isdpfxjn Tpm Hj Afwoa

Sąlyga: naudotas, Gamybos metai: 2000, Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Planer table length: 2500 + 500 mm Feed motor: 3 kW Feed speed: 6–36 m/min 1 WEINIG Planing and Moulding Machine Unimat 23 E 6 spindles (including 2 right-hand spindles), powerful motors, EM 11 infeed magazine optional Working width: 20–230 mm Working height: 8–120 mm 1st spindle (bottom): 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–180 mm Rebate device incl. tool Table insert hardened in front of 1st bottom spindle 2nd spindle (right): 11.0 kW ----- Common motor with left vertical spindle Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–250 mm Max. tool diameter behind fence plane: 203 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm 3rd spindle (left) ----- Common motor with 2nd spindle Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–200 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm Pressure shoe in front of left spindle, incl. lateral spring-loaded roller pressure 4th spindle (right): 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–250 mm Max. tool diameter behind fence plane: 203 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm 5th spindle (top): 11.0 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–200 mm Max. profiling depth: 35 mm Axial adjustment range: 45 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from tool, spring-loaded 6th spindle (bottom): 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–250 mm Max. profiling depth: 15 mm Axial adjustment range: 45 mm Spindles in general ----- All moulding spindles with high rotational accuracy. Lubrication points for axial spindle movement. Vertical spindle length: 170 mm Feed system ----- Motor with mechanical brake, 3 kW Infinitely variable mechanical feed 6–36 m/min Infeed roller in front of 1st bottom tool, pneumatically controlled for up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Axial adjustment range of feed rollers relative to left spindle: 35 mm Extension of the oscillating shaft relative to left spindles to 150 mm Machine electrics ----- Operating voltage: 380–400–415 volts, 50 Hz Machine base, tables, and fences Isdpfowqr Rvsx Afwsa ----- Planer table 2.5 m long (incl. straightening guide) Aluminium extension 0.5 m for planer table, incl. extension of straightening guide Manual Waxilit pump for table resin removal One driven rubber roller (spring-loaded in outfeed table) Pressure elements and guides ----- Top pressure rollers, pneumatically operated Top pressure rollers can be swivelled away, opposite right spindles for easy tool change Machine operation ----- Pressure shoe in front of top spindle with mechanical digital display. Outfeed after top spindle with mechanical digital display. ATS/E system, automatic 2-axis positioning for spindle No. 3 and 4 Minimum working height: 12 mm Electric height adjustment of top spindles and feed Central lubrication points positioned at the front of the machine Safety and sound...

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, darbinis plotis: 255 mm, obliavimo aukštis: 160 mm, ašies skersmuo: 40 mm, obliavimo plotis: 255 mm, darbinio aukščio: 160 mm, padavimo variklio galia: 3 000 W, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 6 000 aps./min, aukščio reguliavimo tipas: elektrinis, obliaus veleno skersmuo: 40 mm, įvesties srovės tipas: trifazis, ašies skaičius: 5, įėjimo dažnis: 50 Hz, Įranga: kabina, variklio stabdis, Weinig Unimat 23 E with 5 spindles, Working width: 255 mm, Isdpfx Aoxg Sa Hefwoa Working height: 160 mm, Spindle diameter: 40 mm, Feed: 3 kW / 6 – 36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (7.5 kW) 4-Top (5.5 kW) 5-Bottom (4.0 kW) Driven roller in the outfeed table.

Sąlyga: naudotas, Saw blade tilting range: 0-45° Carriage length: 3,200 / 3,800 mm Cutting width: 1,300 / 1,500 mm Motor power: 7.5 kW Cutting height: 177 mm Cutting height at 45°: 133 mm Saw blade diameter: 500 mm Speed: 3000/3600/4200 RPM Working height: 870 mm Extraction nozzle diameter: 1x120, 1x100 mm Fimal Panel Saw P 3200-08 AX Partnership Edition ----- Manufacturer description: - Sliding table made of anodized aluminum, incl. high-precision guide rail made of hardened and ground steel - Sliding table lockable in any position - Saw blade guard with swing-away mechanism - Extension arm with adjustable angular stop and length compensation every 5° and at 22.5° - Mitre stop and eccentric clamp - Belt transmission for speed change from above (access opening in saw table) - Control lights for set saw blade speed - Electrical components and safety features according to CE standard Technical Data: - Saw blade tilt: 0° to 45° - Table dimensions: 1,030 x 680 mm - Working height: 870 mm - Sliding table dimensions: 3,200 x 400 mm - Cutting length with scoring unit: 3,420 mm - Cutting width at rip fence: 1,300 mm - Max. cutting height with 500 mm saw blade: 90°: 177 mm / 45°: 133 mm - 3 speeds: 3,000 / 3,600 / 4,200 rpm - Motors: Main saw: 7.5 kW / 10 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP - Sound level per EN 27960: 84.4 – 86.3 dB(A) - Extraction ports: 1 x 120 mm, 1 x 100 mm - Angle stop extendable to 3,400 mm ----- Equipment Partnership Edition P 3200-08 AX: - 3-axis programming unit for blade height adjustment, saw blade tilt adjustment and rip fence adjustment via TFT 15" touchscreen based on Windows, incl. 2,500 program storage slots, 2 USB ports and 1 Ethernet network connector - Scoring unit with electric height adjustment and motorized axial pulse adjustment, incl. digital display for height and width - Angle stop with 3 stop riders; 2 riders with digital display, 1 rider is analog but, via coupling to a digital rider, also adjustable digitally - Upper control panel incl. automatic star-delta starter Option at extra cost (on request): - Cutting width 1,500 mm, sliding table length 3,800 mm ----- Iedpfx Aetg Ailefwoa Price for the above-mentioned machine on request! ----- Prices plus packing and shipping Prices plus statutory VAT ----- (Technical information as per manufacturer - without guarantee!)

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Darbinis plotis: 230 mm, darbinis aukštis: 160 mm, velenų skaičius: 5, veleno diametras: 50 mm, veleno galia: 4x 5,5 kW / 2x 11 kW, padavimas: 24 m/min, padavimo stalo ilgis: 3000 mm, vertikalaus veleno ašinė eiga: 80 mm, horizontalaus veleno ašinė eiga: 45 mm. Bendras pajungimo galingumas: 126 kW, oro poreikis: 8400–9600 m³/val., staklių matmenys (X/Y/Z): apie 3500 mm / 2000 mm / 1800 mm, svoris: apie 3500 kg. Į komplektą įeina Weinig EM-11 įstūmimo įrenginys ir tinkamas ištraukimo paskirstytuvas. Dokumentacija yra. Galima apžiūrėti vietoje. Iedsu Damdepfx Afwsa