Liejimo staklės

Weinig E3 infeed + A3 outfeed

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Weinig E3 podavač a A3 výstup E3 podavač: Nůžkový zvedák před příčným podávacím stolem. Příčný podávací stůl k podávacímu urychlovači. Pgsdoxtwm Eepfx Afwow Podávací urychlovač před hoblovkou (moulder). A3 výstup: Výklopné rameno. Pásový příčný dopravník. Nůžkový zvedák s balícími řetězy. Výstupní balící řetězy.

Sąlyga: naujas, Gamybos metai: 2025, 20T Premium Plus Loading Ramp, internal usable width 20 m. TM-GROUP – the best choice on the market. ⭐️ Galvanized load-bearing grating on the upper section of the ramp as well! ⭐️ ✅ Specification: - Manufacturer: TM-GROUP - Maximum load capacity: 20 tons - Internal ramp width: 2000 cm - PREMIUM PLUS variant – galvanized grating also on the upper part of the ramp (highlighted in red in one of the last photos) - ELECTRIC and manual ramp height adjustment from 1 m to 1.6 m - Galvanized drive-on grating - Reinforced side guardrails on both sides of the ramp - Solid rubber transport wheels - Central ramp handle for maneuvering with a forklift - Adjustable angle and height of the ramp flap - Both-side, reinforced ramp supports - Moving ramp components equipped with grease fittings - Ramp also equipped with a winch ✅ Drive-on Grating: - Galvanized grating with anti-slip grooves. Secure and safe surface. Both forklifts and pedestrian traffic are ensured maximum grip and stability. Competitors usually offer ramps where the drive-on is made of sheet metal with mesh overlay. Our product features a grooved grating, a much more durable solution that lets dirt from forklift wheels fall through and keeps the ramp clean and slip-resistant. ✅ Forklift holder – can be installed on either side: - Convenient and fast mounting for a forklift enables moving the ramp in all directions. Specially designed handle allows maneuvering even in confined spaces. ✅ Chain for attachment to a truck, railway wagon, or fixed dock: - A solid steel chain provides additional securing, preventing any ramp movement during loading operations. Podpjwb A Elefx Afwjgw ✅ Heavy-duty side barriers: - Safety railing that can be unscrewed to allow installation of a frame/awning (awning optional). ✅ Electric ramp height control: - Smooth electro-hydraulic drive with high-quality pump. The pump requires 230V (standard socket operation). ✅ Double-acting hand pump: - Hydraulic manual pump for height adjustment in case electro-hydraulic power is unavailable – dual-direction lifting. This solution ensures operation in all conditions. ⭐️ Available variants: ⭐️ - Drive-on width: 1700 mm, 2000 mm, and 2500 mm in Standard, Premium, and Premium Plus versions - Mobile ramps with load capacities of 10, 15, 20, and 25 tons - Grating thickness for drive-on surface: 3–5 cm - Colors: red, blue, black, and green (custom colors available on request) - Mobile ramp with tarpaulin covering As a manufacturer, we offer ramps tailored to individual requirements – custom dimensions, load ratings, and options. Looking for a bespoke solution not found among our listings? Contact our specialist. Tags: Dock ramp, unloading ramp, loading ramp, mobile dock ramp, loading dock, mobile loading dock ramp, mobile loading ramp.

Sąlyga: beveik kaip naujas (naudotas), WEINIG Hydromat H30N, S/N 253-886, Year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system • Maximum working width: 300 mm • Maximum working height: 140 mm • Electronic, stepless feed, 12–120 m/min. • Feed motor: 22.0 kW • 1st spindle below: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW Psdpfx Aotynpxefwsgw • 6th spindle top: 22.0 kW • 7th spindle below: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle below: 11.0 kW • All spindle motors with electronic brake • COMPLETELY NEW CUTTERHEAD SPINDLES • Spindle diameter: Ø 50 mm • Spindle speed: 6,000 rpm • 6 powered feed rollers in the table – hard-chromed • Spindles 1 + 6 + 7 + 8 + 9 with NEW counter bearings • Hydraulic counter bearing clamping • Spindles 2 + 3 + 8 + 9 with straight jointer • Spindles 4 + 6 pneumatic pressure • NEW feed rollers, D=170 mm • Hard-chromed table plates • Hard-chromed fences • Heavy-duty top pressure rollers – pneumatic • Heavy-duty side pressure rollers – pneumatic • Automatic table lubrication – NEW • Central lubrication points • NEW standalone control panel, 5 m cable • NEW standalone control cabinet, 5 m cable • Operating manual, spare parts list, and circuit diagram included + Many NEW spare parts/accessories Dimensions: • Total length: approx. 6,150 mm • Total width: approx. 2,160 mm • Machine weight: approx. 9,500 kg Power connection: • Total connected load: approx. 157 kW Condition: Machine as shown in photos – technically as-new Payment: Payable in full by bank transfer prior to loading Delivery time: By arrangement Delivery: EXW Inspection: Possible anytime by appointment Offers & inquiries only with complete company details Errors and prior sale excepted

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SK-K-24001, 1 optimized cross-cutting line with scanner Manufacturer: Dimter Pedpfxowya Syj Afwogw Model: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 DIMTER cross-cutting system with 1 x OptiCut 450 and feeding system F 100 featuring LuxScan CombiScan+ C 200 with curvature measurement The system was operational until 2024, has been professionally dismantled, and can be inspected in this condition.

Sąlyga: geras (naudotas), Four-side planer Weinig Unimat 23 Lamella Machine 9 spindles, grooved bed Working width: 230 mm, Working height: 170 mm, Spindle diameter: 40 mm, Feed: 5.5 kW / 6 – 36 m/min, Spindle configuration: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (5.5 kW) 4-Right (5.5 kW) Pgedpfx Afjpq T Rbjwsw 5-Top (11 kW) 6-Bottom (5.5 kW) 7-Top (7.5 kW) 8-Bottom (37 kW) 9-Universal (11 kW) 5 powered feed rollers in table

Sąlyga: naudotas, Gamybos metai: 1997, Beam planer 260 x 160 mm, trailing chamfering unit on the upper spindle, air cushion table with two-axis control for left and upper spindle, factory-new control system (latest Weinig version) - Max. working width: 260 mm - Max. working height: 160 mm - Number of spindles: 6 1st spindle: bottom - Spindle diameter: 40 mm - Clamping length: 270 mm - Speed: 6000 rpm - Motor power: 11.0 kW 2nd spindle: right - Spindle diameter: 40 mm - Clamping length: 170 mm - Speed: 6000 rpm - Motor power: 11.0 kW (shared with left spindle) 3rd spindle: left - Spindle diameter: 40 mm - Clamping length: 170 mm - Speed: 6000 rpm 4th spindle: top - Spindle diameter: 40 mm - Clamping length: 270 mm - Speed: 6000 rpm - Motor power: 11.0 kW 5th spindle: bottom - Spindle diameter: 40 mm - Motor power: 11.0 kW - Speed: 6000 rpm - Clamping length: 270 mm 6th spindle: top, chamfering unit - Motor brakes: mechanical - Vertical adjustment of the upper spindle: electric Psdpfxswwwkhe Afwsgw - Optional with/without feed - Feed brake system: Yes - Feed speed, infinitely variable: 3 – 23 m/min - Feed roller pressure: pneumatic - Feed power: 4.0 kW - Feed drive: Cardan shaft - Lubrication pump: manual - Max. jointing depth: 10 mm - Jointing rebate cutter on jointer: Yes - Driven rollers in table: 1 - Control type: PLC control - Spindle position display: mechanical numeric indicator - Feed rollers before jointer: Yes - Air cushion table: three tracks - Central lubrication point: Yes Description: short infeed table 1050 mm with interior light Location: Nattheim

Gamybos metai: 1996, Sąlyga: geras (naudotas), Four-Sided Planer Weinig Unimat 23 – German-made – Serrated table – Year of manufacture: 1996 – Driven feed rollers in the table TECHNICAL SPECIFICATIONS: Planing width: 230 mm Planing height: 160 mm Serrated table Pgsdpfeh Dwl Dex Afwow Spindle diameter: 40 mm 1st bottom spindle: 7.5 kW 2nd right spindle: 7.5 kW 3rd left spindle: 7.5 kW 4th top spindle: 11 kW 5th bottom spindle: 7.5 kW Infinitely variable feed speed: 6–36 m/min Feed motor power: 5.5 kW Six upper steel feed rollers Two upper rubber feed rollers Three driven rollers in the table Pneumatic feed pressure Pneumatic pressure shoe Spindles with brakes Infeed table length: 1970 mm Electric height adjustment Centralized (split) lubrication Extraction port diameter: 140 mm Machine dimensions (L/W/H): 410 / 200 / 180 cm Weight: approx. 3000 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus,

Sąlyga: naudotas, Gamybos metai: 2014, Number of spindles: 5 pcs. Working width: 230 mm Planing height: 120 mm Pgjdpfx Afowzmu Rowew Surface table length: 2,500 mm Feed motor: 4 kW Feed speed: 5-30 m/min Control: Memory function Weinig Powermat 600 Compact ----- Machine is cleaned and fully inspected. Brief summary: ----- - 5 spindles - Powerful motors - Left and top spindle controlled for width and height Detailed description: ----- Technical data: Working width: 20-230 mm Working height: 10-120 mm Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 125 - 145 mm Tool circle diameter with rebate cutter: 130 - 160 mm Axial adjustment range: 5 mm Rebate device MarathonCoatin for table insert in front of the 1st lower tool holder Electronic digital readout for radial adjustment 2nd spindle - right ----- Motor with brake: 11.0 kW Shared motor with left tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter 40 mm below table level: 93 - 200 mm Tool circle diameter 55 mm below table level: 93 - 180 mm Tool circle diameter for straight knife cutterheads max.: 163 mm Max. tool diameter behind fence line: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm 3rd spindle - left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter 40 mm below table level: 93 - 200 mm Tool circle diameter 55 mm below table level: 93 - 180 mm Tool circle diameter for straight knife cutterheads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Radial spindle CNC-controlled 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 93 - 200 mm Tool circle diameter for straight knife cutterheads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Radial spindle CNC-controlled Divided pressure shoe in front of the top tool holder, adjustable to tool circle diameter and can be swung clear of the tool, spring-loaded. Pressure shoe before and outfeed after top spindle with electronic digital readouts, integrated in the memory function or PowerCom 5th spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 93 - 200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller before 1st lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment range of feed rollers relative to left tool holder, axial 35 mm Machine electrics ----- Operating voltage: 400 V (voltage range 380 - 420 Volts), 50 Hz. All spindles IE 2 version Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN60204, IEC-204-1. Other electrical standards are not taken into account. Mach...

Sąlyga: paruoštas naudoti (naudotas), Technical characteristics: Pjdot T U E Sjpfx Afwsgw Multifunctional bridge mechanization CNC machining Frame assembly line with 3 assembly tables, 50 meters long Nice unit, in very good condition, to be dismantled on site Power and Motors: Overall dimensions: