Formatinė pjovimo staklės

Wegoma SC25

Būklė: naujas, „Ruchser“ stiklinės juostos tvirtinimo įrenginys „2 P Jumbo automatic E.C.“ – naujas – Jūsų privalumai: – Kampiniai sujungimai yra uždaryti. – Nėra atvirų stiklinių juostų siūlių. – Nėra spalvų skirtumų dažant. – Stiklinių juostų rėmus lengva sujungti. Stiklinės juostos kampinių sujungimų įrenginys 2P „Jumbo Automatic E.C.“ skirtas stiklinių juostų rėmų tvirtinimui. Galima pasirinkti automatinį arba rankinį režimą. Įrengtas kampinis atraminis įtaisas, tvirtinimo įtaisas iš viršaus ir priekio. Slėgis reguliuojamas atskirai. Galima naudoti lygiagrečias ir vieną ant kitos dedamas tvirtinimo detales, valdomas elektroniniu programiniu įrenginiu. Įrenginys gali būti montuojamas ant tinkamo darbo stalo, valdomas pėsčiuoju pedalas. ----- Šios konfigūracijos kaina – pagal užklausą! Prie kainos pridedamas įstatymų numatytas PVM ir pakavimo/siuntimo išlaidos. ----- Nuotraukose – stiklinės juostos kampinių sujungimų įrenginys 2P su galimybe naudoti judamąjį darbo stalą (išsamesnė informacija apie papildomą kainą rasite skyriuje „Papildomos kainos“). Papildomos kainos: ----- Judamasis darbo stalas aukštis reguliuojamas nuo 700 iki 1000 mm, 2 vnt. įkišamų atraminių strypų, 1000 mm ilgio, 2 vnt. pasukami ir stumiami atraminiai strypai, 1000 mm, atraminiai strypai dengti filcu, 4 vnt. pasukami ratai, iš jų 2 su stabdymo įtaisu. ----- Papildoma kaina: 1 311,00 Eur (be PVM) Tvirtinimo detalės: paketai Godpfxevnh T No Al Nsud 15 mm tvirtinimo detalės (2000 vnt. pakete): kaina 22,00 Eur 12 mm tvirtinimo detalės (3000 vnt. pakete): kaina 32,00 Eur 10 mm tvirtinimo detalės (3000 vnt. pakete): kaina 32,00 Eur Matmenys ir svoris ----- „Jumbo Automatic E.C. – 470 x 370 x 300 mm, 35 kg Darbo stalas – 32 kg Visos kainos nurodytos be PVM. PVM ir pakavimo bei siuntimo išlaidos pridedamos atskirai. (Techniniai duomenys pagal gamintojo teiginius – be garantijos!)

Gamybos metai: 2026, būklė: naujas, The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table product range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested in Accordance with BGI 739-1” seal. This makes it suitable for hand sanding tasks as well as for processing workpieces using handheld machines. The sanding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to its funnel-shaped design with an integrated air duct, the airflow is precisely guided towards the extraction port. Depending on the required extraction performance, the unit can be connected to the on-site extraction system via a Ø 140 mm or Ø 160 mm connection port. The folded edges along both sides of the work surface allow for face-end working on workpieces. The extraction grates are aerodynamically aligned with the extraction port to ensure optimal extraction results. For cleaning inside the sanding table, the slatted grid can be removed and the air duct can be detached by loosening just a few screws. The sanding table is delivered pre-assembled; only the legs need to be installed and adjusted to the required working height. Your advantages: • Accessible from all four sides • Loadable up to 150 kg • Manual, tool-free height adjustment with scale • Offset side edges for edge sanding • Workpiece-friendly beech slatted grid (removable) • Funnel-shaped air guidance to the extraction port Guodpjfyadbefx Al Nod Technical data: • Extraction port: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at port at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working surface (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Gamybos metai: 2024, būklė: naujas, Vežimėlis profilių transportavimui ir sandėliavimui vertikalioje padėtyje COMALL CARR 300 Q, naujas Techninės specifikacijos: - 10 skyrių, darbinis dydis 128 mm Gsdpof Nk H Hofx Al Noud - Kontaktiniai paviršiai padengti nesibraižančia ir smūgiams atsparia plastikine medžiaga - 4 ratai, Ø 125 mm, 2 iš jų su fiksavimo mechanizmu - Reguliuojamos atramos – 5 skirtingos padėtys - Guminis atraminis stalas - Keliamoji galia: 650 kg

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), WEINIG window production line Gedpfx Aoh H Iyxsl Nsud comprises: Unirex 3000 machining center Univar 15 Unitex 15

Būklė: naujas, Gamybos metai: 2025, Suction nozzle diameter: 1 x 200 mm, 3 x 100 mm Nominal volumetric flow rate: 1,760 m³/h Gedohpmawopfx Al Njud Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Filter cleaning: motorized Motor power: 3 kW Noise level: 78 dB(A) Machine length: 1,340 mm Machine width: 900 mm Machine height: 2,170 mm Weight: 178 kg

Būklė: dilaminuotas dirbtuvėje (naudotas), Grinding table dimensions: 2500 x 800 mm Abrasive belt dimensions: 6800 x 150 mm Gsdpfxov D H Sio Al Nsud Motor power approx. 3.0 kW Table height adjustment: mechanical Right/left rotation 2 belt speeds Top abrasive belt cover CE compliant Incl. special grinding shoe Note on used machines: • Errors in technical data and prior sale excepted. • The listed prices are ex-works - free loading! • The machines have been cleaned and function tested. • All machines are sold as inspected with no guarantee or warranty. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Būklė: naujas, Working length: 2451 mm Working width: 2170 mm Working height: 800–1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- Base Frame Guodpfx Aoi Hmpiol Nod - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800 mm–1000 mm) - Conveyor system for timber lengths from 300 mm to 4,200 mm - Conveyor system for timber widths up to 240 mm Roller Conveyor – Infeed - Continuously driven roller conveyor, approx. 5–25 m/min - Drive via 0.37 kW geared motor, drive shaft and PU round belt - Roller diameter 50 mm, roller cover length 240 mm with PVC coating - Transfer to cross conveyor by raising/lowering the roller conveyor - Roller covers in accordance with HBG Cross Conveyor - Cross conveyor with 6 traverses - PVC-coated conveyor belts (green), 50 mm wide, guided in plastic channels - Continuously driven cross conveyor approx. 5–20 m/min - Drive via 0.37 kW geared motor - Approx. 1,750 mm from stop to stop Roller Conveyor – Outfeed - Continuously driven roller conveyor, approx. 5–25 m/min - Drive via 0.37 kW geared motor, drive shaft and PU round belt - Roller diameter 50 mm, roller cover length 240 mm with PVC coating - Transfer to cross conveyor by raising/lowering the roller conveyor - Roller covers in accordance with HBG ----- Belt Conveyor approx. 320 mm x 3,500 mm Base Frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800 mm–1000 mm) - Belt conveyor for timber lengths from 300 mm to 4,200 mm - Belt conveyor for timber widths up to 240 mm - Belt conveyor on castors with brakes Belt - Continuously driven, approx. 5–25 m/min - Drive via 0.37 kW geared motor - Belt, PVC-coated, 260 mm wide - Adjustable stops approx. 15 mm on each side ----- Control System: - Plug-and-play with its own control system and logic - Siemens PLC, 24 V DC - Siemens frequency inverter - Optical limit switches and emergency stop loop - Fully installed with 16A European plug - Connection: 400V AC, 2 kW, 50 Hz ----- Pneumatics: 6–8 bar, consumption approx. 16 NL/min Colour: RAL 7035 light grey Complies with basic EU directive 2006/42/EC in accordance with 2006/95/EC Electrical Equipment (Low Voltage Directive) and 2004/108/EC EMC Directive ----- Price for the above-mentioned specification ex works: on request! plus packaging and transport costs ----- (Technical information according to manufacturer. Subject to change and without guarantee!)

Būklė: naudotas, Gamybos metai: 2005, galia: 7,5 kW (10,20 AG), pjovimo aukštis (maks.): 170 mm, pjovimo plotis (maks.): 1 100 mm, pjūklo disko skersmuo: 500 mm, pjūklo disko nuolydžio reguliavimas: 46 °, aukščio reguliavimo tipas: hidraulinis, pjūklų disko skylė: 30 mm, sukimosi greitis (maks.): 5 500 aps./min, sukimosi greitis (min.): 2 800 aps./min, bendras ilgis: 3 300 mm, bendras plotis: 2 000 mm, bendras aukštis: 1 800 mm, bendras svoris: 1 500 kg, Įranga: CE žymėjimas, No. 04528 Martin T 73 BASIC Panel Saw Used, year of manufacture 2005 Sliding table: 3000 mm Max. cutting height: 170 mm Max. saw blade diameter: 500 mm Saw blade bore: 30 mm Rip capacity: 1100 mm Motor: 7.5 kW Speeds: 2800 / 4000 / 5500 rpm Hydraulic blade tilting: 0° - 46° Hydraulic cutting height adjustment Lowerable rip fence Pneumatic saw shaft lock Crosscut table with fixed angle setting Telescopic cutting length stop up to 3300 mm Sliding table with stepless locking Integrated contact for dust extraction activation Central lubrication point Transport dimensions: approx. 3300 x 2000 x 1800 mm (L x W x H) Weight: approx. 1500 kg To avoid misunderstandings, inspection on site by appointment is possible and recommended. Guedpjyymtdjfx Al Ned Sale as is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, no guarantee. Subject to prior sale. No warranty is given on used machines; sale as inspected applies. Payment terms: Prices plus statutory VAT. Payment prior to collection or dispatch. Delivery terms: ex stock.

Būklė: naujas, Saw blade diameter 350 x Ø 30/40 mm Cutting diameter 135 mm Cutting length 430 mm Saw blade dimensions 350x3.0/2.4x40 mm Speed 3800 rpm Extraction nozzle diameter 100 mm Total power requirement 3.0 kW Machine weight approx. 100 kg Space requirement approx. 1300 x 800 x 1600 mm - Crosscut and mitre circular saws for crosscutting operations - Double-sided mitre adjustment (60° / 45°), with fixed stop - Single-sided bevel cut up to 45°, with fixed stop - Sturdy cast iron construction - Precision ball bushing guide of the tool carriage on hardened and ground steel shafts Gusdpoxabqzjfx Al Njd - Manual saw feed - Saw blade infinitely height-adjustable - Port for optional extraction Cutting data: - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x Carbide-tipped circular saw blade 350 x 3.0/2.4 x 40 mm * Z = 108 FTZ negative for aluminium and plastics - Hydraulic feed brake, steplessly adjustable - Pneumatic material clamping from above, consisting of: * 2 vertical clamping cylinders, adjustable with hand lever valve - 1x Machine stand - More powerful drive motor (3.0 kW)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Variklių skaičius: 1 vnt. Darbinis ilgis: 2500 mm Valdymas: nėra „Hecht ES 350“ – vienpusė stiklo juostų pjovimo staklė ----- Pasukimas pneumatiniu būdu, atremiant į fiksuotus atraminius elementus. 45º/90º/135º Su pneumatiniu pjovimo disko stūmimo mechanizmu Pneumatinis pasukimas per rankinį pasukimo atraminį elementą Gedpfx Alsvpr N Re Noud Su staklės pagrindu, pneumatinis įtempimas Pjovimo diskas HM 350 x 3,0/2,2/30 Z 100 Pjovimo stendo matmenys: ilgis 700 mm, gylis 1600 mm, aukštis 1500 mm Atraminis elementas 1,5 m Atrama 1,5 m su atramine konstrukcija Atraminis elementas 3 m Atramos ilginimas nuo 1,5 m iki 3 m su atramine konstrukcija Stalo įdėklai su grioveliais, skirti apdorotiems stiklo juostoms „HECHT ASB“ – rankinis ilgio atraminis elementas su skaitmeniniu ekranu, 2500 mm Su dulkių surinkimo įrenginiu (techninės specifikacijos pagal gamintojo duomenis – be garantijos!)