Padėklų diržų griovelių ruošimo staklės

WACO T2-SL

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 600 mm, darbinio aukščio: 900 mm, pjūklo pavara: 7 500 W, 45° tilt-able chainsaw Fsdpfjwzg E Nsx Ac Hsfw Equipped with a 6-meter pusher Drop deck with 6-strand loading chains for faster loading Machine overhauled and fitted with a new digital touchscreen

Būklė: geras (naudotas), Gamybos metai: 1996, Four-Sided Planer Weinig Unimat 23 – German-made – Serrated table – Year of manufacture: 1996 – Driven feed rollers in the table Fodpfx Acsh Dwl Do Hefw TECHNICAL SPECIFICATIONS: Planing width: 230 mm Planing height: 160 mm Serrated table Spindle diameter: 40 mm 1st bottom spindle: 7.5 kW 2nd right spindle: 7.5 kW 3rd left spindle: 7.5 kW 4th top spindle: 11 kW 5th bottom spindle: 7.5 kW Infinitely variable feed speed: 6–36 m/min Feed motor power: 5.5 kW Six upper steel feed rollers Two upper rubber feed rollers Three driven rollers in the table Pneumatic feed pressure Pneumatic pressure shoe Spindles with brakes Infeed table length: 1970 mm Electric height adjustment Centralized (split) lubrication Extraction port diameter: 140 mm Machine dimensions (L/W/H): 410 / 200 / 180 cm Weight: approx. 3000 kg

Būklė: naujas, VKM supplies spare parts for the complete range of VKM and Oswald equipment, as well as selected Bezner-Oswald and Wema Probst machines, BÖGLI band saws, and custom replacement knives produced to drawing for a wide variety of woodworking machines. Many items are available from stock. Below is a list of some of the most frequently requested parts: Centering rollers, 40 mm bore €112.00/each Centering rollers, 50 mm bore €156.00/each Feed roller, 40 mm bore €118.00/each Feed roller, 50 mm bore €138.00/each Discharge roller, 40 mm bore €102.00/each Feed roller, 50 mm bore €126.00/each Bezner WP35 peeling disc €3,920.00/each Ffodpfx Aeg Rn Avsc How Oswald RM162 guide slide RM7072W €302.00/each Oswald RM162 knife holder RM7066W €215.00/each We will be happy to provide a quotation including commercial terms. Additional spare parts are available upon request.

Būklė: naudotas, Gamybos metai: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood, featuring automatic detection and removal of wood defects. Technical data: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Fodpfowtgcxsx Ac Hofw Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Fuse protection: 25 A Condition: used

Būklė: naudotas, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table crosscut saw ----- Maximum cutting range: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards, max. height: 100 mm. The frame is entirely constructed from thick-walled, reinforced, fully painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Two-hand safety cutting control positioned ergonomically. Saw motor power: 5.5 kW. Adjustable cutting speed via pneumatic regulator. Maximum system for weight balance and durability. Shock-absorbing system. Independent pneumatic adjustments for adaptation to different processing types. Durable and easily replaceable saw blade guide bar. TCT circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece hold-down with electro-pneumatic control. Pressing system operates via innovative ball bearings with dual dust protection and automatic lubrication system. CE-compliant electrical system. CE-certified models must be equipped as standard with infeed and outfeed support tables/roller conveyors of at least 1 meter in length. Technical Specifications: ----- Maximum cutting cross section, mm: 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Ffedpfx Acev Uq Tls Hew Saw blade diameter: 500 mm Saw blade type: TCT Z=108 Saw blade speed: 2800 rpm Air consumption per cycle: 5 Nl Extraction connections: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400 V / 50 Hz, 3-phase Working table height: 900 mm ± 20 mm Color tone: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity: 230 kg, diameter: 60 mm, spacing: 250 mm, width: 320 mm. Area between rollers enclosed with painted steel. Including side guide. 2 m roller conveyor (left of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity: 230 kg, diameter: 60 mm, spacing: 250 mm, width: 320 mm. Area between rollers enclosed with painted steel. Including side guide, stop guide, and millimeter scale. 2 robust pneumatic stops, width 200 mm ----- Total price ex works: on request! ----- Pictures and video not original; show an identical model. Additional options (e.g., longer infeed/outfeed tables, stop systems) available on request! (Technical data according to manufacturer's information—subject to change!)

Gamybos metai: 1970, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Stenner RESAW VHL 48 Hersteller: Stenner UK Seriennummer: J2103 Baujahr: 1970 (Originalfotos folgen in Kürze) Hauptmaße und Daten: Ffjdpfxevuhumj Ac Hjw - Durchmesser der Sägebandrollen: 48" = 1220 mm - Breite der Bandrollen-Auflagefläche – Standard: 5" (127 mm) - Breite der Bandrollen-Auflagefläche – optional: 5 1/2" (140 mm) - Maximale Sägeblattbreite – Standard: 5 1/2" (140 mm) - Maximale Sägeblattbreite – optional: 6" (150 mm) - Minimale Sägeblattlänge: 25' 8" (7820 mm) - Maximale Höhe der oberen Sägebandführung über Tisch: 28" (710 mm) - Tischhöhe ab Boden: 31 1/2" (800 mm) - Gesamthöhe ab Boden: 9,1' (2770 mm) - Gesamtbreite: 8,1' (2460 mm) - Umlaufgeschwindigkeit der Bandrollen: 8.000 ft/min (2.440 m/min) - Motorleistung: 30 kW - Maße der Antriebs- und Loserrolle: 20" x 6 1/2" - Vorschubgeschwindigkeit Standard: 0–140 ft/min (0–42,6 m/min) - Versandgewicht (Nettogewicht): 3.583 kg Beschreibung: Die VHL 48 ist ein Bandsägewiderlaufschnittautomat moderner Bauart, der zahlreiche neue Merkmale umfasst, die durch umfassende Analyse der Anforderungen von Anwendern und Bedienern entwickelt wurden. Ziel ist eine schnelle und präzise Bearbeitung bei gleichzeitig einfachem Handling, reduzierter Bedienerer­müdung, geringem Wartungsaufwand und erhöhter Sicherheit. Die Konstruktion erfüllt alle wesentlichen Kriterien für einen maximal effizienten Betrieb. Die Maschine ist in erster Linie für Hobelwerke und Zimmereibetriebe konzipiert. Das dünne Bandsägeblatt ermöglicht eine hohe Holzausbeute, da der Verlust durch Schnittfuge (Sägeschnittbreite) sehr gering ist. Im Vergleich zu einer Kreissäge mit Radialarm ist die VHL schneller, verursacht weniger Verschnitt und benötigt weniger Energie bei vergleichbarer Leistung. Allgemeines: Die VHL ist ausschließlich als Linksausführung lieferbar, d. h. die Bandrollen laufen in Vorschubrichtung gesehen gegen den Uhrzeigersinn. Der Antrieb ist so ausgelegt, dass die Sägegeschwindigkeit 8.000 Fuß/Minute (2.440 m/min) beträgt. Hauptantrieb: Der Hauptantrieb erfolgt auf die untere Bandrollenwelle, die vorbereitet ist für Keilriemen, Flachriemen oder lose und feste Flachriemenscheiben – je nach geplanter Antriebskonfiguration. Komplettausstattungen mit Elektromotoren bis 40 PS (ca. 30 kW) für die meisten Netzformen können geliefert werden; inklusive zwei Keilscheiben, Keilriemensatz, Schutzverkleidung, Motor mit Schlitten, Starter und einem am Maschinengestell in Bedienernähe angebrachten Haupt-Not-Aus-Taster. Horizontale Rollen: Die horizontalen Rollen haben 6" (152 mm) Durchmesser und reichen auf der Anschlagseite über die gesamte Öffnung und auf der offenen Seite 6" (152 mm) über den Tisch hinaus. Standardmäßig sind es freilaufende Leerlaufrollen. Optional können sie hydraulisch angetrieben werden – entweder ab Werk oder nachträglich. In diesem Fall erfolgt der Antrieb synchron zu den Hauptvorschubwalzen über einen separaten Motor. Die offene Rollen an der Auslaufseite drehen dann gegenläufig zur Erleichterung des Rücktransports von Holz zum Bediener. Die Rolle vor der Säge ist seitlich verstellbar, um einen schnellen Sägeblattwechsel zu ermöglichen.

Gamybos metai: 2019, būklė: beveik kaip naujas (parodų įrenginys), Aluminium flat conveyor belt incl. 4 suspension points Dimensions: 6000 + 520 x 105 mm Ffsdpsd Ra Ttefx Ac Hjw Conveyor belt width: 400 mm PVC conveyor belt incl. cleats and corrugated sidewalls * Optionally available with magnetic deflection roller at the end of the conveyor. * Optional underframe available * Custom-made versions in all designs possible.

Būklė: naujas, Gamybos metai: 2025, 10T Ramp, Usable Internal Width 1.7 m – TM-GROUP, the Best Choice on the Market ✅ Specification: - Manufacturer: TM-GROUP - Maximum Load Capacity: 10 tons - Internal Width of Ramp: 1700 mm - Reinforced Side Rails on Both Sides - Ramp Rollers for Easy Maneuvering - Central Handle for Positioning with a Forklift - Adjustable Ramp Angle and Flap Height - Double Reinforced Ramp Supports - All Moving Parts Equipped with Grease Nipples - Ramp also Equipped with a Winch - ELECTRIC as well as Manual Height Adjustment ✅ Loading Grid: Grid with anti-slip grooves. Provides a safe and stable surface. Both forklifts and pedestrians benefit from maximum traction and stability. Competing products often use plain sheet metal with grid covering—our ramp features a grooved grid, a much more durable solution that prevents debris from accumulating and ensures the forklift doesn’t slip. ✅ Forklift Receiver – Can Be Mounted on Both Sides: Practical and rapid connection for forklifts enables the ramp to be transported in any direction. The specially designed handle allows precise maneuvering even in tight spaces. ✅ Chain for Connecting to Lorry, Railcar, or Fixed Warehouse Ramp: A heavy-duty steel chain adds extra safety and prevents the ramp from shifting during loading and unloading. ✅ Durable Side Rails: Protective rails with the option to remove or mount a frame/roof (roof available as an option). ✅ Electric Height Adjustment: Smooth electro-hydraulic drive with premium pump. Requires only 230V – suitable for standard power outlets. ✅ Two-Way Hand Pump: Ffodpfx Acowa Nr Nj How Hydraulic pump for height adjustment when electrical power is unavailable—raising and lowering from both sides. Perfect solution for all operating conditions. ⭐️ Available Variants: ⭐️ Ramp widths: 1700 mm, 2000 mm, and 2500 mm – Standard, Premium, and Premium Plus Mobile ramps with load capacities of 10, 15, 20, and 25 tons Grid thickness: 3–5 cm Colors: Red, Blue, Black, and Green (custom colors on request) Mobile ramp with tarpaulin As the manufacturer, we offer custom-built solutions to meet your individual requirements – in various sizes, load capacities, and configurations. Need a tailored solution you can't find anywhere else? Contact our specialist! Keywords: loading ramp, unloading ramp, access ramp, mobile ramp, loading platform, transfer ramp, mobile loading ramp, mobile access ramp.

Gamybos metai: 2021, būklė: naujas, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm – NEW – : Price ex stock incl. loading! 1 racking unit with 4 uprights €3,875 (net)! Shipping within Germany (excluding islands): €550 (net)! Of course, you can build longer or shorter racking units by omitting or purchasing additional frames (or by adjusting the bay width), the example with 4 uprights is simply the most common racking solution!! A cantilever racking system, hot-dip galvanized, consisting of: 4 double-sided uprights approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 adjustable arms of 1.20 m, 500 kg load capacity per arm with bracing approx. 1.30 m Double-sided uprights approx. 5180mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable racking arms each Fjdpeddmq Tjfx Ac Hjfw Load capacity at load center of 600 mm: 500 kg per arm / 2,600 kg per upright side With longitudinal and diagonal bracing, bay width = 1,300mm. Standard is 1.30m. Other standard bay widths available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m! For bay widths from 1.50m, a small surcharge applies to the stated price! Special dimensions (other bay widths) are also available on request, subject to surcharge and longer delivery times as these are made to order! If you do not specify a different bay width, we will supply the rack with a bay width of 1.30m. In this case, the length of one row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany directly from Würth), ground anchors not included. Other configurations (upright height, arm lengths, types of arms, etc.) available on request! Please contact us! Photos show a similar rack!

Gamybos metai: 1990, būklė: dilaminuotas dirbtuvėje (naudotas), Four-side planer WEINIG, 7-head, universal, head configuration: bottom horizontal, right vertical, left vertical, right vertical, top horizontal, bottom horizontal, and final universal head. Drive is implemented using cardan shafts. Head protection with Rotax safety clutches. Workpiece feed clamped pneumatically. Continuously adjustable feed through frequency inverter. Feed speed: 0–42 m/min. Motors: 2.5 kW and 7.5 kW. Table reground and new. Additionally equipped with new wiring and new electrics. Machine fully refurbished. Warranty provided. Ffjdspqxnxopfx Ac Hew