Lazerio pjovimo staklės

TRUMPF TruLaser 3030 Fiber (L49)

Būklė: naujas, Gamybos metai: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to a variety of surfaces. It is a dry finishing process in which a fine powder made from resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged, ensuring even adhesion to the surface and forming a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to provide a clean surface, which is essential for the powder to bond effectively with the substrate and produce a firm, long-lasting coating. Lasdpfswf Dpgex Alrsd A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spraying Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It usually includes devices such as powder pumps, feed hoses, and powder sieves to deliver the powder from storage to the spray gun. Pretreatment Equipment Pretreatment systems are used to prepare the substrate before powder coating application. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature, allowing the powder to melt, flow, and cure to form a durable surface. The oven typically features a conveyor or racks to transport coated parts through the oven chamber. Exhaust System An extraction system is installed in the facility to remove excess powder, fumes, or volatile compounds generated during the coating process. This helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2012, veikimo valandos: 55 771 h, lazero valandos: 35 157 h, lazerio galia: 3 200 W, maks. lakšto storis: 20 mm, plieno lakšto storis (maks.): 20 mm, aliuminio lakšto storis (maks.): 8 mm, stalo ilgis: 3 000 mm, stalo plotis: 1 500 mm, X ašies eiga: 3 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 150 mm, pozicionavimo greitis: 140 m/min, pozicionavimo tikslumas: 0,02 mm, paskutinio kapitalinio remonto metai: 2024, padavimo ilgis X ašis: 3 000 mm, padavimo eiga Y ašimi: 1 500 mm, padavimo ilgis Z ašis: 150 mm, Įranga: apsaugos šviesos užtvara, aušinimo blokas, dokumentacija / vadovas, Lazeris veikia, galima apžiūra ir išbandymas. Reguliariai prižiūrėtas, geros techninės būklės. Visi veidrodžiai buvo pakeisti 2024 metais. Lodov Hxbbjpfx Alread

Būklė: naudotas, Gamybos metai: 2012, X eiga 2134 mm Y eiga 1016 mm Z eiga 762 mm CNC valdymas: HAAS CNC Stalo dydis: 2134 x 914 mm Maks. stalo apkrova: 1814 kg Veleno tvirtinimas: SK 50 Veleno apsukos: 7500 aps/min Veleno pavara: 22,4 kW Pajudėjimo diapazonas: 1270 mm/min Greitasis eiga: 15,2 m/min Įrankių keitimo įrenginys: 30 pozicijų Aušinimo sistema: IKZ Darbinė įtampa: 400 V Staklių svoris apie: 13,2 t Vietos poreikis apie: 4,70 x 2,95 x 2,99 m - Gamyklos Nr.: 1099476 - Pagaminimo metai: 2012/11 - Vidinis aušinimo skystis per veleną - 5 ašių plėtinys su papildomu TR310 pasukamu stalu (kaip naujas) Lasdpjx E Dn Nsfx Alrsd KAINA UŽ STAKLES BE PASUKAMOJO STALO TR310: 82.000,- EUR + PVM.

Gamybos metai: 2011, būklė: paruoštas naudoti (naudotas), Travel range X/Y/Z: 3000mm/1500mm/115mm, max. material thickness for mild steel/stainless steel/aluminum: 25mm/20mm/12mm, axis speed: 140m/min, laser type: TruFlow 5000, laser power: 5000W (5kW), machine dimensions X/Y/Z: approx. 9300mm/4600mm/2200mm, weight: approx. 12000kg, operating hours (as of February): approx. 75000h, laser hours (as of February): approx. 42000h. Documentation available. An on-site inspection is possible. Lasdpfx Aswzbbrolrjd

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, galia: 88 kW (119,65 AG), temperatūra: 220 °C, šildymo galia: 30 kW (40,79 AG), ruošinio aukštis (maks.): 1 500 mm, ruošinio ilgis (maks.): 500 mm, izoliacinė medžiaga: Steinwolle, izoliacijos storis: 150 mm, ruošinio plotis (maks.): 500 mm, Scope of supply: 1. Chemical pre-treatment by spraying (in cycle operation) 2. Dryer 3. Powder coating system 4. Powder curing oven 5. Conveying technology, semi-automatic 6. Electrical control system Hall / Installation Area Maximum system footprint: 12,000 x 6,500 mm Floor type: Industrial floor Workpiece dimensions Maximum part dimensions: L = 500 mm, H = 1,500 mm, W = 500 mm Parts spectrum: Steel Conveying technology Lasdpfx Asulwg Nslrod P&F – Power & Free chain conveyor in cycle operation, semi-automatic Pre-treatment Chemical Energy supply Electricity: On-site power supply (max. 88 kW) Gas: On-site supply Compressed air: On-site supply Water: On-site supply Calculation System type: Cycle system Conveying speed: 3.2 meters / min Cycle length per step: L = 1,600 mm Time per conveying step (Tm): 1.6 meters / 3.2 meters/min = 0.5 minutes Dwell time per cycle (Ts): 8.5–12 minutes Total cycle time (Tt): Tm + Ts = 9–12.5 min Electrical power: Total capacity 88 kW Minimum average consumption: 60 kWh Maximum average consumption: 70 kWh

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, darbinio aukščio: 2 200 mm, Industrial Spray Washing System for Pretreatment of Parts Prior to Powder Coating Manufacturer: BUMEX Sp. z o.o. BUMEX Sp. z o.o. offers a professional industrial washing system for the preparation of components prior to the powder coating process. The system has been designed for demanding industrial environments where cleaning performance, process stability, and long-term reliability are crucial. The washing system enables effective preparation of steel and aluminum parts through a multi-stage cleaning, degreasing, and rinsing process. Technical Specifications Working Area Dimensions: 1500 × 3200 × 2200 mm Process Technology: 3-stage washing process Process Tanks The system is equipped with 3 process tanks: - Tank for cleaning/degreasing chemicals - Tank for rinse water - Tank for demineralized water (DI water) Tank Capacity: 1500 – 2000 liters DI Water Generator The system features a DI water generator, ensuring high-quality final rinsing and optimal surface preparation for the powder coating process. Heating System The chemical tank is fitted with a heating system for the process liquid. Available Heating Options: - Oil heating - Gas heating - Electric heating Maximum Operating Temperature: up to 60°C System Construction The system is manufactured entirely from high-quality stainless steel AISI 1.4301, offering the following benefits: - High resistance to chemicals - Long service life - Easy cleaning and maintenance Key Features of the Washing System: - Very robust industrial design - Fully insulated system to reduce energy loss - Spray system with minimal cross-contamination of process liquids - Pre-filter for contamination retention - High cleaning efficiency Control System The system is equipped with fully automated controls, allowing precise regulation of: - Process temperature - Pump operation - Washing time - Sequence of individual process stages Why Choose BUMEX? Our systems are characterized by: - Exceptionally high build quality - Rugged industrial construction - High operational safety - Complete technical documentation - Customization options for integration into existing production facilities All BUMEX Sp. z o.o. equipment carries CE marking. Additional Technological Support BUMEX also offers: - Powder coating booths - Extraction and filtration systems - Industrial ventilation systems Ljdpfxshfv D Sj Alroad - Professional technological consulting Delivery Conditions - In-house transport (price agreed individually) - Issuance of VAT invoices - Short delivery times - Possibility of manufacturing in custom configurations and dimensions

Gamybos metai: 2010, būklė: paruoštas naudoti (naudotas), Parduodama TRUMPF gamintojo CNC lazerinio pjovimo sistema. Lazerio galia: apie 3000 W (3 kW), darbinė sritis: X/Y/Z 3000 mm/1500 mm/115 mm. Papildomai siūlomas ir tinkamas Liftmaster iš 2015 metų, kurį galima įsigyti ir atskirai. Lajdjxxa Ucspfx Alred

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, lazerio galia: 6 000 W, X ašies eiga: 3 030 mm, Y ašies eiga: 1 520 mm, Z ašies eigos atstumas: 310 mm, bendras ilgis: 9 500 mm, bendras plotis: 4 500 mm, bendras aukštis: 2 050 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, aušinimo blokas, avarinis stabdymas, centralizuota tepimo sistema, dulkių šalinimas, dūmų ištraukimas, purkštukų keitiklis, VS-3015CE 6KW pluošto lazerinė lakštinio metalo pjovimo staklės Darbinis plotas (mm): 3000×1500 X ašies eiga (mm): 1520 Laodpfx Alov Ngrajrod Y ašies eiga (mm): 3030 Z ašies eiga (mm): 310 X/Y ašių pozicionavimo tikslumas: ≤0,03 mm/m X/Y ašių pakartotinio pozicionavimo tikslumas: ≤±0,02 mm Maks. sintezuotas pozicionavimo greitis: 150 m/min Maks. pagreitis: 2G Dvipusis valdymo pultas, adaptyvus daugiakampis išdėstymas, paprastas išardymas ir galima transportuoti standartiniame 40HQ konteineryje. Pramoninės klasės specialus oro kondicionierius – pastovi temperatūra ir drėgmė, užtikrinanti stabilius veikimo parametrus. Automatinė tepalo ir alyvos įpurškimo sistema, protingas oro slėgio stebėjimo įrenginys ir apsaugos nuo susidūrimo detektorius užtikrina išmanią apsaugą.

Būklė: geras (naudotas), Gamybos metai: 2007, Working area X 4000 mm, Y 2000 mm, Z 115 mm Weight 16,000 kg Dimensions (L x W x H): approx. 9800 mm x 5300 mm x 2000 mm Control: Siemens Sinumerik 840 D Laser type: TruFlow 4000 W Max. sheet thickness: 20 mm 4000 mm x 1250 mm Feed rate: 3400 mm Dismantling, loading, and crane work are not included in the machine price – additional charges apply for all services. NC: 88631 – Resonator/HD Pump 1: 87603 – Beam On / Pump 2: 53667 Lasdpfx Aljvtm Szersd Technical parameters: - Model: KNC/H 1500/65 - Maximum temperature: 650 °C - Recommended operating temperature range: 300°C – 600°C - External dimensions approx. (W x H x D): 2800 x 3200 x 2100 mm * Height including door mechanism for hydraulic opening - Internal dimensions (W x H x D): 1500 x 1000 x 1000 mm - Number of heating zones: 1 - Max. batch weight: 1000 kg - Heating power: 48 kW - Furnace weight: approx. 1300 kg - Voltage: 3/PEN 400/230 V AC 50 Hz - The damper is part of the furnace, serves for automatic temperature control inside the furnace, and is controlled by the controller’s program. - Including technical documentation in Slovak - Temperature field measuring and optimization report in accordance with DIN 17052-1 ΔT10°C (measured in an empty furnace at Tmax) - Technical documentation is in Slovak. Manufacturer: LAC, s.r.o., Czech Republic Year of manufacture: 2021 This is an electric furnace with a heating system consisting of resistance heating elements located near the fan unit. The fan circulates the atmosphere in the heating chamber over the heating branches, thereby heating both the working atmosphere and the load inside the furnace. The furnace working chamber is equipped with a separately controlled heating unit at the rear wall. For optimal temperature distribution throughout the working space, the furnace is fitted with a radial circulation fan with a horizontal shaft. The circulation fan drives the heated air through the circulation channels of the recirculation insert. All rotating parts are protected against accidental contact. The temperature profile of the device is managed by a programmable PID INDUSTRIAL controller. This controller allows up to 30 heat treatment programs to be created, depending on process technology requirements and the properties of the batch being processed. See attached drawing for dimensions.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, Panelių lankstymo staklės Trumpf modelis 7030, pagaminimo metai 2016, įrengtos 2017 m. gegužę, pilnai sukomplektuotas įrenginys su visomis opcijomis, įskaitant ACB lazerinio lenkimo kampą ir Tec Zone programavimo sistemą, galima iš karto. Ledpfsyw Uggsx Alread