CNC šveicariško tipo tekinimo staklės

TRAUB TNL 12/7

Būklė: naudotas, Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, TECHNICAL DATA Spindle Head Maximum Bar Diameter (mm): 13.0 Material Quality (DIN 671) (mm): Ø X h9 Collet, optional: Through-hole Guide Bush, optional: Through-hole Max. Turning Length / Spindle Stroke With Fixed Guide Bush (mm): 130 With Rotating Guide Bush (mm): 80 With Programmable Guide Bush (mm): 80 Spindle Speed: 12,000 min⁻¹ Fodpjyr N Dzjfx Abbspd C-Axis Electronic Resolution (degrees): 0.001 Rapid Traverse Z1 (m/min): 30 Tool Carrier 1 Slide Travel X1 (mm): 35 Slide Travel Y1 (mm): 38 (-10 +28) Rapid Traverse X1 / Y1 (m/min): 15 Tool Stations (number): 6 (12) Turning Tool Cross-section (mm): 8x8 or 12x12 Clamping Range for Driven Drilling Tools (mm): 0.5 - 7 Tool Change Time (sec): 0.3 Tool Carrier 2 Slide Travel X2 (mm): 35 Slide Travel Z2 (mm): 50 Rapid Traverse X2/Z2 (m/min): 15 Tool Stations (number): 6 Turning Tool Cross-section (mm): 8x8 or 12x12 Clamping Range for Driven Drilling Tools (mm): 0.5 - 7 Tool Change Time (sec): 0.3 Driven Tool System for Tool Carrier 1 and 2 Speed (min⁻¹): 0...8000 Maximum Number of Tools: 2x6 Clamping Range for Drilling Tools (mm): 0.5-7 Sub-Spindle / Front Device Maximum Bar Diameter (mm): 13.0 Maximum Longitudinal Stroke 23, 24 / X3 (mm): 140 / 228 Rapid Traverse 23,24/X3 (m/min): 30 Tool Stations (number): 4 Spindle Speed: 12,000 min⁻¹ C-Axis Electronic Resolution (degrees): 0.001 Backworking Attachment, Synchronous / Fixed Z-Axis Stroke Synchronous with Work Spindle (mm): 80 Tool Holder Diameter (mm): 20 Tool Stations (number): 3 Backworking Attachment (X4 Axis) X4 Stroke (mm): 39 Rapid Traverse (m/min): 15 Tool Holder Diameter (mm): 28 Tool Stations (number): 4 Driven Tool System for Backworking Attachment (with X4 Axis) Speed: 0...10,000 min⁻¹ Maximum Number of Driven Tools: 4 Clamping Range for Drilling Tools Driven (mm): 0.5 - 7 Non-driven (mm): 0.5 - 10 Coolant System Pump Pressure, single-stage (bar): 3 120 bar Pump for Front/Rear Attachment Tank Capacity (l): 180 Flow Rate (l/min): 40

Gamybos metai: 2001, būklė: labai geros būklės (naudotas), Schütte AG20 multi-spindle automatic lathe Fpedjhrihyjpfx Abbed

Būklė: geras (naudotas), Gamybos metai: 2002, TRAUB TNL 12/7 CNC Long Turning Automatic Lathe Fpjdpfx Abet E Dbyjbod TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF DELIVERY Includes (not limited to): Traub TNL 12/7 CNC Turning Machine Meyrat High-Frequency Spindles, 2 units Tool holders (driven and non-driven) FMB Minimag 3200 C Bar Feeder Hydraulic unit High-pressure pump Chip conveyor Exact scope of delivery as shown in the photo series No liability is assumed for the correctness, completeness, or up-to-dateness of the information provided.

Būklė: naudotas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bush): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] Fedpfx Abjuhav Debjpd - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven stations on turret: 6 - Max. diameter in sub spindle: 12.7 [mm] - Sub spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] ACCESSORIES - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub spindle - Brake for main spindle and sub spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various fixed and driven tool holders

Būklė: naudotas, Gamybos metai: 2000, Didžiausias apdirbimo skersmuo: 20 mm Didžiausias apdirbimo ilgis: 320 mm Veleno praėjimas: 24 mm Veleno greitis: 200–10 000 aps./min Valdymas: MITSUBISHI CNC ilginis tekinimo automatas | CITIZEN - M-20 su strypų padavėju. Staklės yra labai geros, prižiūrėtos būklės. Fjdpfsvnwfzjx Abbjpd Daugiau techninės informacijos rasite pasiūlyme.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Number of turrets: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 mm - Y-axis travel: -9.5/+28 mm - Z stroke: 48 mm LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z travel: 35/79.5 mm FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 rpm - X/Z travel: 415/138.5 mm BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V ACCESSORIES - CNC control: Traub TX8i - Driven guide bushing - Coolant tank - Bar loader: FMB Minimag Fodpjuhaw Uefx Abbepd

Būklė: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] Fodpfjuhaxfex Abbjpd - Number of turret heads: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] EQUIPMENT - Control: Traub TX8i - Driven guide bushing - Coolant tank - Bar loader: LNS TRYTON HYBRID

Būklė: beveik kaip naujas (parodų įrenginys), Various versions available, such as round, hexagonal, or square, in smooth finish, cross-grooved design, or with longitudinal and transverse grooves. Fpjdpjh Dmamofx Abbod A current list of available as-new and new clamping heads SK32/SK42/SK52/SK65/SK80/SK100 can be found on our website. We look forward to your inquiry. STALEX Werkzeugmaschinen GmbH

Būklė: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machinable length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of live positions: 6 - Travel path X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT TOOL HOLDER - Number of positions: 4 COUNTER OPERATION - Number of positions: 4 - Number of live positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 18 kW ACCESSORIES - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts removal device - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeve: 4 - Set of jaws and collets for bar feeder magazine Fedpfx Abouhawzsbopd - Set of spare parts

Būklė: naudotas, Gamybos metai: 2015, Techninės detalės: Velenų skaičius: 6 Veleno pratekėjimas: 22 mm Fodjxc Idmepfx Abbjpd Pilnas strypų padavėjas: 4,70 m – 3 metrų ilgio medžiagai Staklės vis dar pajungtos prie elektros Ant staklių apdirbama medžiaga: plienas Apdirbama naudojant aliejų Staklėse tik viengubas NCU, be PCU. Visų 6 pagrindinių velenų energijos tiekimas buvo pakeistas 2025 m. balandį.