Frezavimo staklės

TRAK DPM 750

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3020 mm Press force: 320 t (also available in many other configurations!) Approach speed: 140 mm/s Bending speed: max. 10 mm/s Return speed: 130 mm/s Y-axis stroke: 400 mm Installation height: 650 mm Throat depth: 450 mm Clear gap between uprights: 2555 mm Machine length: 3785 mm Machine width: 2290 mm Width without support arms: 1740 mm Overall height: 3100 mm Table height: 920 mm Motor power: 22 kW Oil tank: 300 l Machine weight: 14,450 kg (Data may vary depending on equipment) Standard equipment: • 3 CNC axes (Y1, Y2, X) • Press beam with double guidance, stable and precise • Sturdy, double-guided backgauge • Gauge fingers with double guidance on linear guides • Sliding front arms with height adjustment • Lateral and rear safety covers • Lower die adapter rail 60mm • Manual upper tool clamping system (Promecam system) • Foot switch with emergency stop • 380 V, 50-60 Hz, 3-phase • LED lighting Additional equipment: • Delem DA 66T CNC control • R-axis of backgauge CNC-controlled • CNC-controlled crowning • Fiessler Akas 2M laser safety system • 2 additional gauge fingers (total 4) • 1 set of upper and lower tools - Additional working lengths and capacities available with suitable accessories! - Cjdpfxsuf Nr Ao An Hjrc

Gamybos metai: 1963, būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Tekinimo skersmuo: 600 mm Tekinimo ilgis: 1000 mm Crodpfx Anoyx Dtle Hjc Įranga: - Trijų žandų tekinimo griebtuvas, Ø 250 mm - Keturių žandų tekinimo griebtuvas, Ø 250 mm - Centrinis taškas - Greitai pakeičiamas gręžimo griebtuvas MK5 - Dokumentacija

Gamybos metai: 1963, būklė: paruoštas naudoti (naudotas), Lifting capacity: 18 t, lifting height: 10,750 mm, span: 23,000 mm, weight: 35.1 t. The machine has been regularly maintained and inspected. Cjdpfx Aoh I Edvon Horc

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swiveling: ±8° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Cross travel max.: 270 mm Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mounting: 80 mm Tailstock quill mounting: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a delivered machine. - Very simple operation via touch panel. - Symbol layout on control panel almost identical to original control, so no retraining necessary. - Diagnostic function with display of PLC messages and digital I/Os - Dressing function can be modified or expanded as per customer request. - Oriented spindle stop for the workpiece spindle available on request. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital readout in 2 axes. X-axis resolution: 0.5 micron Options: - Encoder with digital display in the workpiece spindle headstock - Encoder with digital display in the grinding spindle headstock (height adjustment with spindle not possible) - New, robust internal grinding attachment, 80 mm or 100 mm diameter - Increased centre height up to max. 225 mm - Grinding spindle speed control Included: - Operating tools - Clamping tube for chuck Cjdjuxfupjpfx An Herc Further accessories on request. The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic table longitudinal and rapid traverse movement. Versatile use in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single clamping for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control The machine tool currently does not comply with the basic safety and protection requirements as stated in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives.

Gamybos metai: 1999, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition, equipped with a tool lift system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Tool holder in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by the machine body of the tool tray) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine dimensions (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt, 50 Hz Connected load: 9 kW Equipment: • The machine has an electric control for the broaching stroke movement with both manual and automatic operation. • Integrated coolant/lubrication system Csdper A Hcbofx An Hjrc • Tool lift system for flat broaching tools (no automatic feed) • The broaching slide with pull head holder is equipped with flat guides on both sides Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg) • Complete machine documentation, including CE declaration of conformity Remarks: The machine is ideal for manufacturing keyway slots. Thanks to its robust machine bed and the integrated tool lift system, it is especially well-suited for quick and easy use of flat broaching tools. The machine has had very limited use and is in near-new condition. The machine is available for inspection at our warehouse and can be demonstrated under power. Our direct contact details and further information about the machine can be found in the attached PDF document.

Gamybos metai: 1967, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 7011/C, Table clamping surface: 310 x 1400 mm Crodpfod Rxw Hjx An Hjc Table travel X-axis: approx. 950 mm Table travel Y-axis: 325/345 mm Table travel Z-axis: approx. 500 mm Spindle speeds: 20 - 1500 rpm Longitudinal and cross feeds: 18 - 620 mm/min Vertical feeds: 18 - 620 mm/min Electrical connection: 380 V kW Required space: 1900 x 1600 x 1750 mm Weight: approx. 1500 kg

Būklė: naudotas, TECHNICAL DATA - Number of Axes: 7 MILLING SPINDLE - Tool Holder: HSK40 - Spindle Speed: 30,000 rpm LINEAR AXES - Travel X/Y/Z axes: 450/270/310 mm Cjdpfxeuhbr Te An Hjrc - Rapid Traverse Speed (X/Y/Z): 75 m/min SWIVEL AXIS B - Travel Range: -20/+90 degrees - Minimum Resolution: 0.001 degrees TOOL CHANGER - Tool Changer Type: Parapluie (umbrella type) - Magazine Capacity: 40 tools TURNING SPINDLE - Spindle Speed: 8,000 rpm - Max. Bar Diameter: 32 mm - Minimum Resolution C-axis: 0.001 degrees - Travel Range: 360 degrees ELECTRICAL SUPPLY - Supply Voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 1500 x 2600 mm - Machine Height: 2300 mm - Machine Weight: 2850 kg OPERATING HOURS EQUIPMENT - Control System: Siemens 840 D - 3-color Status Light

Būklė: naujas, Gamybos metai: 2025, x-axis travel 580 mm y-axis travel 200 mm z-axis travel 340 mm Spindle speeds 115 - 1750 rpm Table size 1000 x 240 mm Tool holder ISO 40 Total power requirement 4.5 kW Machine weight approx. 820 kg Space requirement approx. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling operations, featuring a digital 3-axis position display DPA 31 Plus Description: - Heavy, robust design made from high-quality, vibration-absorbing cast iron - Oil-bath gearbox with ground and hardened gears - Coolant system - Halogen machine lamp with focused beam - Large, heavy-duty precision cross table, ground surface, with T-slots and adjustable gib strips - Milling head tiltable ± 45° - Clockwise/counterclockwise rotation Cedetv Riaepfx An Hsrc - X-axis movement selectable via handwheel or table feed unit - Automatic end-stop for the X-axis - Height-adjustable safety screen with microswitch, shielding against flying chips and parts for maximum operator protection Scope of delivery: - Keyed drill chuck 1 - 16 mm / B18 - Drill chuck arbor ISO40 / B18 - Horizontal milling spindle with counter bearing, arbor for slitting saws Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Drawbars for vertical and horizontal operation - T-slot nuts - Drift key - Operating tools

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 36 kW (48,95 AG), pavaros tipas: hidrostatinis, kuro tipas: dyzelinas, kuro bako talpa: 45 l, spalva: geltonas, bendras svoris: 2 900 kg, didžiausias leistinas svoris: 4 000 kg, kėlimo aukštis: 1 014 mm, padangos dydis: 11.5/80-15.3 Mitas TS-05, padang padangų: 100 procentas, ašių konfigūracija: 4x4, sėdimų vietų skaičius: 1, emisijos klasė: Euro 5, Gamybos metai: 2025, veikimo valandos: 1 h, Įranga: visų varančiųjų ratų pavara, === TECHNISCHE HAUPTDATEN === Baujahr: 2025 Betriebsstunden: 2 h Betriebsgewicht: 2.690 kg Maximale Nutzlast: 4.000 kg Muldenvolumen: 2,3 m³ (gehäuft) Getriebe: Hydrostat Allradantrieb: Ja Differentialsperre: Ja Schnellwechsler: Nein Kabinentyp: Offene ROPS / Optional geschlossene Kabine Heizung: Nein Klimaanlage: Nein Bereifung: Geländereifen 4x4 Motorhersteller: Perkins 403J-E17T Motorleistung: 36 kW (49 PS) Abgasnorm: Stufe V Hydraulikleistung: n. a. CE-Zertifizierung: Ja === BESONDERHEITEN === Crodpfxjxg Dcas An Hjc Neues 2025er Modell mit nur 2 Betriebsstunden Perkins-Motor Stufe V – leistungsstark und kraftstoffeffizient ROPS-Schutzbügel oder optional geschlossene Kabine Komplette CE-Zertifizierung und Dokumentation enthalten Kompakter und robuster Dumper für schwere Einsätze Verstärkte Mulde mit 2,3 m³ gehäuftem Fassungsvermögen === ZUSTAND === Neu, unbenutzt und voll funktionsfähig Geprüft und sofort einsatzbereit Direkt ab Lager Sittard verfügbar === STANDORT & LIEFERUNG === Standort: Sittard, Niederlande Weltweite Lieferung möglich Preis auf Anfrage (EXW, zzgl. MwSt.) Zuverlässiger Dumper aus Erstbesitz mit vollständiger CE-Zulassung und Prüfdokumentation Ideal für Erdbau, Bauwesen und innerbetriebliche Transporte In Österreich nach höchsten Qualitätsstandards gefertigt Unterstützt durch das professionelle Service-Team von Colle Rental & Sales === LIEFERUNG === Kranverladung auf Wunsch für einfaches Handling Flexible Transportlösungen auf Ihre Anforderungen abgestimmt Sämtliche Logistik professionell abgewickelt durch Colle Rental & Sales

Būklė: naujas, Sheet width 3100 mm Sheet thickness 10 mm Cutting angle 2° Hold-downs 14 units Strokes 13 strokes/min Throat depth 350 mm Oil capacity 260 l Control system CYBELEC CybTouch 8 Total power requirement 22 kW Machine weight approx. 10,550 kg Space required approx. 4000x2250x2050 mm Features: - Hydraulic swing beam plate shear - Touchscreen controller with digital display for backgauge - Automatic blade gap adjustment via the control system - Backgauge control, 1000 mm travel with ball screw spindles - Swing beam machine with blade gap adjustment - 2 support arms Crjdpfxjk Tzztj An Hjc - 1 side gauge - Light curtain at the rear of the machine - Cutting length limiter - Cutting line illumination - Chromium steel blades - Ball transfer table - Flip-up finger guard with limit switch - Foot pedal - CE mark / Declaration of Conformity - Operating manual in German