įrankių galąstuvė

ADELBERT HAAS Multigrind HT

Būklė: geras (naudotas), Gamybos metai: 2005, veikimo valandos: 114 129 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2820, Sale only within Germany Control: Siemens Sinumerik Software: Haas Software 7.3 Number of axes: 6 (X, X3, Y, Z, C, A) Grinding spindle: - Infinitely variable up to 8,000 rpm - Haas short taper - Max. grinding wheel diameter: Ø200 mm Workpiece spindle: - Up to 1,000 rpm - Center height: 175 mm - Clamping collet 3409 - Spindle taper: SK50 - Thru-hole diameter: Ø28.5 mm - Max. workpiece weight: 2.5 kg - Indexing accuracy: +/- 3.5 angular seconds - Input increment: 0.001° Workpiece support: Linear axis X3 with bushing holder Feed drives: - Linear axes with ball screw spindles - Direct path measurement with 0.0001 mm resolution Workpiece dimensions (drills): - Ø 0.8 - 15.0 mm - Overall length: 20 - 380 mm - Grinding length: 10 - 360 mm - Max. workpiece weight: 2.5 kg Chain magazine: - 42 positions - Ø 0.8 - 15.0 mm - Length: 80 - 250 mm - Max. workpiece weight: 1.5 kg Stack magazine: - Accommodation for stack magazine for indexable inserts Measuring system CCD area camera: - Indexing and positioning of tools by coolant channel (from Ø 0.8 mm) - Measurement of opening angle - Indexing of multi-flute drilling and reaming tools Renishaw probe: - Probing of workpiece length / tool tip - Scanning the flute helix - Positioning in a coolant channel hole at the tool tip Electrical connection: - 63A pre-fuse - Mains voltage: 400 V - Frequency: 50 Hz - Control voltage: 24 V - Rated power: 21 kW Weight: 8 t Incl.: - Control cabinet cooling: water-water heat exchanger - Fire protection system: Kraft & Bauer fire extinguishing system - Extraction unit: Büchel Smog-Hog SH 2000/T - Dressing unit (stationary dresser) - Hold-down device ----- Operating mode for drills: - Manual loading of the chain magazine outside the machine enclosure - Workpiece feed with automatic handling system - Workpiece clamping with automatic collet chuck - Positioning of workpieces in the work area - Workpiece machining - Automatic return of workpieces to powered conveyor belt Operating mode for solid carbide indexable inserts: - Manual loading of the stack magazine in work area - Workpiece feed with automatic handling system - Automatic clamping with special clamping device - Positioning of workpieces in the work area - Workpiece machining - Automatic return of machined workpieces to the storage system Drill grinding: - Grinding of flute profile - Grinding of cutting edge - Peripheral grinding Bsdpfowpqkrex Ab Tswn - Grinding of relief angle - Grinding of land - Cylindrical grinding Indexable insert grinding: - Grinding of contact surface and pin ----- Two further identical machines are available for sale!

Būklė: geras (naudotas), Gamybos metai: 2007, Naudojamas OKUMA tekinimo staklės - Modelis: LT200-M TwinStar - Gamybos metai: 2007 - su drožlių transporteriu - aušinimo skysčio baku - iš karto prieinama Bwsdpsv S Svvefx Ab Tjn

Būklė: naudotas, bendras ilgis: 6 800 mm, bendras plotis: 2 200 mm, bendras aukštis: 2 000 mm, Tuščias svoris: 11 000 kg Kaina: Pagal užklausą - Dokumentacija prieinama: Taip - CE sertifikatas: Ne - Valdymas: Konvencinis - Centre aukštis [mm]: 630 - Maks. aptekinimo skersmuo virš staklių [mm]: 1300 - Maks. aptekinimo skersmuo per skersinį stumoklį [mm]: 1000 - Centro atstumas [mm]: 4000 - Staklių pločio [mm]: 700 - Špindelio skylė [mm]: 120 - Min. špindelio sukimosi greitis [aps./min]: 2,8 - Maks. špindelio sukimosi greitis [aps./min]: 400 - Pasirinktys: Trijų žandų tvirtintuvas, keturių žandų tvirtintuvas, išimamas staklių lovys, greito keitimo laikiklis, fiksuota atrama, judanti atrama - Maks. aptekinimo skersmuo su išimamu loviu [mm]: 1700 - Transportavimo matmenys: 6800mm x 2200mm x 2000mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 11 000kg - Siuntinių skaičius [vnt.]: 2 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/Pirkėjo atskaita: PVM atskaitomas verslui Pristatymas ir priėmimas įskaitymui galimi bet kada visai pramoninei įrangai Bjdex Iriajpfx Ab Tjwn Lukas van Rossum

Būklė: geras (naudotas), Gamybos metai: 2006, Markė: GEMINIS Modelis: GHT4 G2 700x2000 Valdymas: FANUC 21 TB Atstumas tarp centrų: 2000 mm Ø virš lovos: 720 mm Bodpfx Asxdub Isb Tewn Ø virš vežimo: 470 mm Veleno skersmuo: 104 mm Maks. ruošinio svoris tarp centrų: 2 560 kg Veleno galas: DIN 55027-11 Galvos apsukos: 0–1 600 m/min Bendroji galia: 28 kW

Būklė: naudotas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 50 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW SUB SPINDLE - Max. bar diameter: 20 mm - Travel Z: 150 mm - Travel X: 225 mm - Spindle speed: 8,000 rpm - Spindle drive power: 1.1 kW - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 5 - Travel X/Y: 97/133 mm BACKWORKING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 6 kW WEIGHT AND DIMENSIONS - Required space: 1063/2033 mm - Machine height: 1666 mm - Machine weight: 1,700 kg ACCESSORIES - Control unit: CINCOM 18iTB - Coolant tank Bodsuha Umepfx Ab Tswn - Bar feeder: IEMCA SMART 320

Būklė: naujas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Stock machine "NEW" – available at short notice! (subject to prior sale) Control Unit: FANUC 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC storage LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Travel Ranges: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear Guides & Speeds: Ball guides on X/Y axis Roller guides on Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate when milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool Magazine (CAM-Type) / Changer: Number of magazine positions: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent empty slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/continuous): 18.5/11 kW 15,000 rpm direct drive spindle Spindle oil cooler Coolant, Chip, and Compressed Air Management: Coolant system incl. 300-liter tank and pumps External coolant around the spindle Chip augers right and left in the machine bed Compressed air nozzle on the spindle (M32/M33) Compressed air through the spindle (M38/M39) Compressed air and coolant gun Other Features: Swiveling control panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger on control cabinet Auto power OFF function Hand tool set Signal beacon Transformer 400 VAC, 50 Hz CE Declaration of Conformity in accordance with European directives Electrical and Pneumatic Requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Special Equipment Included: Spindle: - Direct drive spindle SK-40, 15,000 rpm - Drive power (30min/continuous): 18.5 / 15 kW, (FANUC motor) Tool Magazines / Changers: - Drum magazine with 30 stations, DIN69871, SK-40 Rotary or Additional Axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, Chip, and Compressed Air Management: - Bed flush - CTS coolant pump with 20 bar pressure for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip trolley (chip discharge to front on left machine side) Measuring and Monitoring Systems: - RENISHAW OMP-60 touch probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ laser tool measurement system and tool breakage control in the machine, incl. mount - Auto door (side door) - Pneumatic interface for workpiece clamping Bsdeifn N Njpfx Ab Tswn - Clamping devices as shown with RoboJob Mill Assist 25kg (year 2025 – NEW) - Full enclosure - Double gripper Available immediately

Būklė: naudotas, Gamybos metai: 1998, Bore diameter: 90 mm Stroke: 490 mm Throat depth: 400 mm Total connected load: 10 kW Machine weight approx. 3,500 kg Space requirement approx. m KADIA Vertical Honing Machine Model: VZH 90 / 450 F Year of manufacture: 1998 Serial no.: 50 / 1790 _____ Max. honing diameter: 10 - 90 mm Max. honing depth: 30 - 450 mm Max. spindle stroke: 490 mm Spindle throat: 400 mm Mounting height under spindle nose top approx.: 1,200 mm Table size approx.: 400 x 600 mm Max. workpiece diameter approx.: 700 mm Spindle speeds, infinitely variable: 160 – 830 rpm Stroke speed, infinitely variable: 25 mm/min Spindle drive: 4.5 kW Bwsdpfx Ast Hw T Ssb Ton Total drive: 10 kW - 400 V - 50 Hz Weight approx.: 3,500 kg Overall machine height approx.: 4,000 / 3,300 mm Accessories / Special equipment: • Machine equipped with SIEMENS S5 / Unipos 4.0 PLC for entry of all key honing parameters such as tool speed, stroke length, expansion, honing time, fault messages, etc. • With a fixed table 600 x 400 mm • Automatic shut-off after a preset time, followed by spindle return • Automatic motorized expansion of the honing tool via electromechanical feed head ESZ 90/1 D • Separate hydraulic unit, central lubrication, workpiece clamping device on the table • Currently no suitable coolant system, no honing tools included. Condition: good to very good - ready for demonstration Delivery: ex stock - as inspected here Payment: strictly net - upon receipt of invoice

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 31 000 h, Funkcionalumas: visiškai funkcionalus, CNC Swiss-type automatic lathe Brand: STAR Model: SV-38R Bsdpeytq Ahefx Ab Tjwn Year of manufacture: 2014 Equipped with: FANUC 31i - B control, synchronous sub-spindle, backworking capability, live tooling, turret with B, Y, X, and Z axes, 2x C-axis, Y2-axis, high-pressure pump, oil mist extraction unit, parts conveyor, chip conveyor, fire extinguishing system, can be used as either a short or long turning machine, bar feeder: FMB Turbo 5-55

Būklė: paruoštas naudoti (naudotas), Parduodamas Nikken CNC 400 besisukantis stalas labai geros būklės! Jis paruoštas Mazak M32 valdymui, tačiau pagal poreikį gali būti lengvai perdarytas. Disko skersmuo 400 mm. Matmenys I/P/A: 740/240/420 mm. Dėl papildomos informacijos mielai atsakysiu į klausimus. Bjdpoya Dtmofx Ab Tewn

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Cell with FANUC Arc Mate 100iD welding robot Year of manufacture: 2019 Bodpfx Aot Rwwrob Tewn Axes: 6 Reach: 1441 mm Payload: 12 kg Fanuc System R-30iB Plus robot controller and housing measuring 2 m x 2 m x 2.7 m (without Kemper extraction system)