Electric Press, Servo Press,C frame pres

TOX CMB008.407.A.001

Būklė: paruoštas naudoti (naudotas), An automated tube bending system with two Wafios bending heads and a Kuka twist robot is available. 1) Wafios RB20 bending head, bending direction: left and right, max. total tool height: 78 mm, bending capacity: 360 Nm, bending speed: 560°/s, bending radius: 57 mm, repeat accuracy for bending, rotation, and feed: +/-0.05 mm. 2) Kuka KR 16-2 KRC 2 robot, axes: 6, payload: 16 kg, max. reach: 1611 mm, repeat accuracy: +/-0.05 mm, weight: approx. 235 kg. Including overhead magazine, Kuka control cabinet, discharge conveyor, safety fence, mobile control panel, docking station, and work table. Documentation available. An on-site inspection is possible. Bledpswwlkiofx Ai Esp

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 181199, Machine No.: 181199 Manufacturer: AGTOS Type: Drum Blast Machine Model: TS 150-3.6-01-15.0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3,000 m³/h Max. batch weight: approx. 1,000 kg Filter type: Sintered lamella filter Other Details Characteristics of the installed filter unit Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting unit Abrasive (material and size): Wire shot Abrasive quantity (initial fill): approx. 1,000 kg Bljdorq Hmzjpfx Ai Eop Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. drum load: 250 kg Max. weight per individual part: 5 kg Capacity: 150 liters Max. lifting capacity of loader: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)

Gamybos metai: 1981, būklė: naudotas, Press force: 63 t Stroke: 6–60 mm Bljdpfxjlp U R Ij Ai Esp Stroke rate: 90–550 strokes/min Die height (bottom, ram adjustment top): 300 mm Table area: 780 x 600 mm Ram area: 807 x 460 mm Ram bore diameter: 40 mm Ram adjustment: 80 mm Total power requirement: 15 kW Machine weight approx.: 8 t Space requirement approx. (WxDxH): 2900 x 2000 x 3000 mm Centralized oil lubrication system IMCO press force measuring device

Būklė: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] Blodpfx Aieuhaxfe Eop ELECTRICAL SUPPLY - Supply voltage: 400 [V] EQUIPMENT - Control: Traub TX8i - Driven guide bushing - Coolant tank - Bar loader: LNS TRYTON HYBRID

Būklė: geras (naudotas), Gamybos metai: 1999, Pneumatic press, manufacturer SCHMIDT, type: ZHS-2/22, year 1999. Equipped with two-hand operation. Blodpfeiduvcjx Ai Esp Safety inspection (UVV) valid until 2023.

Gamybos metai: 2023, būklė: naudotas, Sheet width: 300 mm Coil weight: 1 t Coil inner diameter: 375–550 mm Coil outer diameter: 1600 mm Machine weight: approx. 0.5 t Space requirement: approx. 1500x1500x1900 mm Hydraulic expansion Loop control 6x guide arms Bodolp U Tbspfx Ai Eolp Safety device Machine number: 35223

Būklė: naudotas, Gamybos metai: 1992, mašinos/transporto priemonės numeris: 120 4687, Press force: 80 t Adjustable ram stroke: 4 - 60 mm Ram adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Distance between uprights (L-R): 800 mm Table height above floor: 1,150 mm Table clamping surface approx.: 780 x 640 mm Ram clamping surface approx.: 800 x 460 mm Blsdouqc I Aepfx Ai Eep Pass-through opening in table: 690 x 170 mm Strokes per minute: 30 - 300 min⁻¹ Power requirement: 21 kW Height above floor approx.: 2,900 mm Machine weight approx.: 12 t Control: Siemens S5 Standard equipment: Roller feed type WAV - RDS 2E 1125 Maximum strip width: 310 mm Strip thickness: 0.3 - 3 mm Strip cross-section: 630 mm² Feed speed: 80 m/min Roller diameter: 125 mm

Būklė: geras (naudotas), Būgninė gumine juosta abrazyvinio valymo mašina Didžiausias partijos tūris: 140 l Didžiausias partijos svoris: 300 kg Didžiausias detalės svoris: 10 kg Skyriaus skersmuo: 700 mm Skyriaus plotis: 850 mm Turbinų skaičius: 1 Turbinos galia: 4 kW Didžiausias turbinos srautas: 56 kg/min Valiklio tipas: oras Pagrindas: ne Korpuso apsauga: Mn + guma Filtravimo vienetas: TAIP Blodpfx Aiozbrftj Esp Didžiausia įrengta galia: apie 12 kW !!! NAUJA guminė juosta sumontuota !!!

Gamybos metai: 1994, būklė: naudotas, Bandwidth: 20-80 mm Material thickness: 0.3-1.5 mm Speed: 0 - 40 meters/min. Working direction: left to right Blodpfxsdc Ez Ho Ai Ejp Straightening rollers: 20 pieces, diameter 30 mm Decoiler load capacity: 300 kg Expansion range: 200-540 mm Outer diameter: 1000 mm Braking: pneumatic

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, INJECTION MOLDING MACHINE Arburg ALLROUNDER 1300 T 1000 – 170 Year of manufacture: 2023 Technical Specifications Clamping Unit: - Clamping force: 1000 kN – ensures high process stability - Rotary table diameter: 1300 mm – optimizes the production cycle - Usable mold mounting area: 800 × 590 mm - Minimum mold height: 300 mm - Maximum daylight between tables: 585 mm Injection Unit (3 interchangeable barrels): Bjdpfxexzklqj Ai Eolp - Barrel Ø 30 mm: 83 cm³ at 2200 bar - Barrel Ø 40 mm: 140 cm³ at 1250 bar - Barrel Ø 20 mm: 36 cm³ at 2500 bar Additional Equipment: - 2 hydraulic core pulls – for complex mold handling - 2 pneumatic valves – for additional mold functions - GK controller – enables control of 3 heating zones directly from the machine - SELOGICA DIRECT control system – precise process control, allows programming of custom sequences Year of manufacture: 08/2023 Pump operating hours: 1062 h Detailed Description The machine is equipped with hydraulics comprising two energy-efficient variable-capacity pumps and a servo valve for precise pressure and movement control. The hydraulic power unit is mounted outside the injection molding machine body, significantly reducing operating noise. Thanks to precise filters and a small oil volume, the oil change interval is extended to 20,000 hours. T2 technology with servo control features: - two variable displacement, adjustable pumps - programmable, adjustable and stabilized clamping force - programmable, manually adjustable nozzle contact force - ability to perform parallel movements (nozzle, ejector, cores) The machine also includes: - Additional system for continuous oil filtration and cooling (bypass circuit) - AES system – automatic main drive optimization, reducing energy consumption by dynamically adjusting pump speed to the machine load (for motors 15–75 kW, 380–480V, 50–60 Hz) Required option: 525/02 – adjustable machine cooling circuits Tool plates are equipped with a central injection position and a centering hole Ø 125 mm.