Automatinė perforavimo mašina

HAULICK & ROOS RVD 80 - 800 NS

Būklė: labai geros būklės (naudotas), Gamybos metai: 1990, mašinos/transporto priemonės numeris: 1203697, Used Punch Press Manufacturer: Haulick & Roos Model: RVD 8/800 NS Press with separate control panel: Haulick & Roos RVD 80-800NS Eccentric press with double connecting rods and a fourfold mounted eccentric shaft No: 1203697 Year of manufacture: 1990 Pressing force: 800 kN Speed: 30–300 strokes/min Drive power: 26 kW Ram stroke: 4–60 mm Ram adjustment: 80 mm Table size: 800 x 640 mm Drop-through hole: 780 x 60–160 mm Table height above floor: 1240 mm Upright distance: 780 mm Dksdpfx Asudn Utog Nsi Lateral upright distance: 350 mm Installation height (max. stroke down/ram up): 300 mm Press dimensions (LxWxH): 3200 x 1700 x 3000 mm Control cabinet (LxWxH): 1800 x 400 x 1900 mm Weight: 12,000 kg Decoiler: Eigl 2527-90 Powered: No Straightening unit with loop control sensor: Eigl RST W37/300 (2528-90) Max. width: 300 mm Max. thickness: 3 mm Number of rollers: 5 Feeder: Haulick & Roos RS 260/120°/2727 Max. feed length: 260 mm Max. width: 260 mm Max. thickness: 3 mm Feeding speed: 40 m/min Material cross-section up to 800 mm?

Būklė: naudotas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: TET351P5-offAD-Bypass - 2200373733, vėsinimo galia: 66 kW (89,73 AG), įvesties srovės tipas: trifazis, aušinimo tipas: vanduo, bendras svoris: 1 082 kg, aplinkos temperatūra (maks.): 46 °C, aplinkos temperatūra (min.): −5 °C, įėjimo įtampa: 400 V, slėgis: 6 juosta, temperatūra: 7 °C, tūrio srautas: 11,2 m³/val, siurblio slėgis: 4,68 juosta, bendras plotis: 866 mm, bendras ilgis: 2 250 mm, bendras aukštis: 2 054 mm, garantijos trukmė: 3 mėnesiai, įėjimo dažnis: 50 Hz, Įranga: Tipinė plokštelė prieinama, Process chiller / air-cooled water chiller, Type: TAEevo Tech 351 P5-offAD-Bypass MTA S.p.A. Chiller, Water Chiller; Cooler TAEevo Tech 351 P5-offAD-Bypass are air-cooled, compact water chillers suitable for outdoor installation down to -5°C. Features include crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and built-in P5 high-pressure pump. Special equipment: - Open filling system / integrated tank - Manual bypass valve between water inlet and outlet Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 66 kW Chilled water outlet/inlet temp. (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R410A Electrical Data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power consumption (kW): 39 Max. current (A): 68 Starting current (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Connection: Rp 2" Serial number: 2200373733 Year of construction: 2021 Condition: Visually grade 2, Technically OK Used (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 88131 Lindau Used machines may have visual defects due to usage. (Technical modifications and prior sale reserved!) Dkodjwlt Rajpfx Ag Nei

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 25.12.15, Fresan FP 100P - C-Frame Eccentric Press - 100 Tons (1000 kN) TECHNICAL DETAILS: * Capacity: 100 tons (1000 kN) * Strokes per minute: 60 SPM (adjustable) * Table to slide distance: 445 mm * Stroke adjustment: 0 - 132 mm * Slide adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm STANDARD FEATURES: * Equipment compliant with CE regulations * Welded steel frame construction * Crankshaft made of alloy steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction. * Bronze bearings quality SnBz-12 * Pneumatic clutch-brake combination * Fully enclosed, oil-lubricated helical gear drive * Press safety valve * Safety PLC & safety switches & light curtains (Pilz) * Six-point slide guidance with waste oil collector * 7-inch HMI touchscreen control panel Dedpfx Agonxh T Rs Neki * Adjustable stroke rate via AC inverter * Motorized slide adjustment * Mechanical overload protection (Hydraulic safeguard can be retrofitted to a standard machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & waste oil collector (spindle oil / slideway lubricant) OPTIONAL EQUIPMENT: * Additional clamping plate * Part ejector (upper and/or lower, mechanical or pneumatic) * Material feeding, loading and unloading systems (decoiler / uncoiler, straightener, pneumatic or servo feed unit) * Custom-engineered machine

Būklė: geras (naudotas), Gamybos metai: 2002, Manufacturer: BRÜCK Model: 12/1600 Dksdpfx Aehrnbkog Nji Load capacity: 12,000 kg Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Weight: approx. 14 t Without control cabinet.

Būklė: naujas, veleno skersmuo: 80 mm, - Ring bending machine - Shaft diameter 80 mm - The two lower rolls are hydraulically adjustable - Three driven rolls - 2 digital displays - Brake motor - Usable in horizontal or vertical position - Mobile control panel - Emergency stop - Documentation - 400V Dkodpoucqqujfx Ag Nei

Gamybos metai: 2002, būklė: naudotas, Press pressure: 63 t Throat depth: 315 mm Stroke: 8–100 mm Strokes per minute: 140 spm Ram adjustment: 63 mm Table area: 1200 x 630 mm Ram area: 800 x 315 mm Through-hole in table: Ø 110 mm Table height: 820 mm Ram bore: Ø 50 mm Installation height: 335 mm Total power requirement: 7.5 kW Machine weight approx.: 5 t Pneumatic clutch-brake combination Dkodpfelp U D Tsx Ag Nsi Centralized oil lubrication Hydraulic overload protection Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation Roller block rails in table Hydraulic tensioner on ram Counterbalance cylinder Approved for manual loading and unloading

Būklė: geras (naudotas), Gamybos metai: 1956, Sunkioji tekinimo staklės, tekinimo staklės, tekinimo suolas, priekinės ir galinės ašies tekinimo staklės - Gamintojas: Meuser, priekinės ir galinės ašies tekinimo staklės tipas M3A - Tekinimo ilgis: 1400 mm Djdpfxsh Uuzyj Ag Njki - Tekinimo Ø virš lovos: 550 mm - Tekinimo Ø be lovos: 800 mm - Tekinimo Ø virš suporto: 300 mm - Špindelio skylė: Ø 58 mm - Špindelio apsisukimai: 15 - 810 aps./min - 3 žandikaulių griebtuvas: Röhm Ø 250 mm - Diskinė plokštuma: 500 mm - Priedai: įskaitant įrankių laikiklį/įrankius, žr. nuotraukas - Galinės atramos tvirtinimas: MK5 - Matmenys: 2770/1160/H1310 mm

Būklė: naudotas, Medžiagos plotis 300 mm Ritės svoris 3 t Medžiagos storis 2 - 4 mm Tiesinimo staklės, 7 volai, gam. Schleicher, tipas RM 6-95/160 Juostos plotis: 300 mm Juostos storis: 2 - 4 mm Dodecdrmmspfx Ag Neki Tiesinimo skerspjūvis: 1200 mm² Įtampa: 220/380 V 50 Hz Galia: 3,1 kW Ritės laikiklis su prispaudimo voleliu, gam. Schleicher, tipas H-3 Maks. apkrova: 3 t Juostos plotis: 400 mm Įtampa: 220/380 V 50 Hz Galia: 3,92 kW be valdymo

Gamybos metai: 1976, būklė: geras (naudotas), Strip width: 300 - 1,350 mm Strip thickness: 0.35 - 3 mm Coil weight: 12.5 t Dkodpjbh Ubwjfx Ag Nei Mandrel Ø: 508 mm

Būklė: naujas, Gamybos metai: 2025, The automatic basket cleaning system XTON Smart Cleaner SC1000™ is made of stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in various industrial sectors and the automotive industry. The cleaning system is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned components. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA liquid, which, in combination with optimal temperature and pressure, effortlessly removes all types of contaminants. The system operates in a closed-loop circuit at temperatures up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-liter tank, which can optionally be thermally insulated to prevent rapid cooling of the liquid. The Smart Cleaner SC1000™ offers high cleaning quality, saves time and energy, and ensures safe and convenient operation. The cleaning unit is designed for the automatic removal of contaminants from cast iron, aluminum, and steel surfaces. The design and construction of the Smart Cleaner SC1000™ comply with the highest quality standards ISO 9001 and environmental standards ISO 14001. Dkjdpfx Agou R Urho Nei EQUIPMENT: - Rotating basket with a diameter of 100 cm - Heated tank with a capacity of 300 liters - Dual liquid filtration system - Sensors for liquid level and temperature - Oil separator - Height-adjustable feet (up to 100 mm) - XTON Active Cleaner BA (5-liter starter pack) TECHNICAL DATA: - Weight: 200 kg - Exterior dimensions – Open chamber (W x D x H): 150 x 120 x 250 cm - Exterior dimensions – Closed chamber (W x D x H): 150 x 120 x 140 cm - Diameter of rotating basket: 100 cm - Load capacity of rotating basket: 300 kg - Adjustable working time: 0 – 99 min - Washing/fluid temperature: up to 80°C - Heating power: 9 kW - Tank capacity: 300 L - Tank volume to oil separator: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 – 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency stop switch, limit switch - Protection rating: IP 54 - Declaration of conformity: CE