Vertikali plokščių pjovimo staklės

Striebig CONTROL 18 5224

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, paskutinio kapitalinio remonto metai: 2025, 1) Log Sort Yard with 10 Boxes (Drop Boxes) – New and Used New log infeed and sorting line Feed speed: 50 m/min. Including the following used components: - New infeed cross conveyor with step feeder, - Used log haul, - Used log haul with ejector, - Used Cambio 50 debarker, - Used sliver scanner with conveyor belt, - Measuring section and sorting log haul. Includes debarker; inspection and painting; includes log infeed. Excludes boxes, sheet metal covering, measurement, sequence control, and control cabinet. Root reduction. 2) Log Infeed for Chipper Line Heavy-duty log cross conveyor – NEW Four-strand log cross conveyor Axle distance: 7.5 m Total length: 8.0 m Drive shaft: 100 mm diameter Chain: bushing conveyor chain, 100 mm pitch – heavy-duty version Fixed end stops at rear, without sheet metal covering Steel substructure: HEB 200 Kdedeykr Aqjpfx Aggsu Construction height: 1,000 mm Drive: gear motor 7.5 kW 3) Equalizer – NEW Number of chains: 4 pcs Axle distance [mm]: 3,500 Overall width [mm]: 5,730 Pusher spacing [mm]: 1,000 Drive shaft Ø [mm]: 100 Drive SEW [kW]: 7.5 Speed [m/min]: 10 Design: completely sheeted between chain tracks 4) Step Feeder – NEW Feed steps: 4 pcs Overall width [mm]: 4,200 Sheet thickness [mm]: movable steps 12 mm, fixed steps 20 mm Drive SEW [kW]: 18.5 Drive via crank mechanism and gear motor 5) Chipper Line (WD Make) Log haul before RB 2 feeding station Length: extend to 18.5 m – drive and return RB 2 Feeding Station With driven chain bed with steel enclosure, designed for lateral feed-in of logs. Conveyor chain with driver attachments, frame in welded construction. Infeed and centering device ZE Including log turner TDV and centering unit. Feeding system ZE Log length: 2.5 – 5 m Clear width: min. 80 mm, max. 780 mm Construction height: 1,000 mm Weight: 5,400 kg Profile Chipper FZ 3 Machine frame with base frame 2 cutterhead housings with main shaft bearings 2 cutterheads with finishing segments Drive power: 90 kW Log diameter: min. 100 mm, max. 400 mm Chipping height above the chain: max. 515 mm Distance between discs: max. 570 mm, min. 60 mm Disc diameter: 1,260 mm Positioning via electric motors 2 hydraulic units 35 kW each for pre-cut and post-cut Pre-cut cant turner Electrically driven roller conveyor TR 800 Centering and feeding system ZE with FZ 3 chipper

Būklė: naudotas, mašinos/transporto priemonės numeris: 007984, Didžiausias apdirbamas plotis: 1300 mm Mažiausias apdirbamas storis: 4 mm Darbo stalas: fiksuoto aukščio Vakuuminis konvejeris: taip Kodpfx Agewqdbmsgjdu Darbo agregatų skaičius: 4 vnt

Būklė: naujas, Panel Saw HOLZ-HER 1255 SECTOR pro - Ex-Demonstration Machine - Cutting Height: 2,200 mm Cutting Length: 5,300 mm Vertical Precision from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience with a robust design, delivering an exceptional price-performance ratio. Your advantages: - Fully welded frame for exceptionally high rigidity - Precise cutting quality - Ready-to-glue cut edges for immediate edge banding - High-torque saw motor with 4 kW power - Space-saving panel cutting with a footprint from as little as 4 m² - Smooth and ergonomic operation TRK Extraction (mandatory in all CE countries - option): Workplaces must meet the highest standards of health and safety. HOLZ-HER saws are among the cleanest and safest in the world. Accessories The extensive range of accessories includes everything from convenient digital measuring displays to our patented Super Cut plus scoringsystem. TECHNICAL DATA Vertical panel saw for cutting sheet materials such as chipboard, MDF panels, veneered boards, multiplex, etc. Base machine: Fully welded frame with extremely high rigidity. Precision guidance of the saw beam/aggregate for accurate cuts. Manual feed for vertical and horizontal cuts. Maximum cutting depth: 60 mm Kdedpfx Ageu R Syijgeu Saw Beam: Stable saw beam guided on precision rails. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in the vertical cut. Saw Unit: Effortless, ergonomic operation for engaging and disengaging the saw unit. The plunge lever can be folded away in the upper position for precise engagement. Generously sized levers ensure easy pivoting. The housing cover opens the entire saw unit for simple tool changes, including ProLock quick-change chuck. Viewing Window: Riving knife can be retracted. Control Panel: Efficient machine control ergonomically positioned at eye level. Bottom Workpiece Support: Robust, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through. Extraction: Effective dust extraction with two connections: saw unit Ø 120 mm, frame end Ø 100 mm (with TRK version) Lifting Roller Transport System: Manually raiseable/lowerable rollers for easy and gentle panel transport. Measuring Tape: For horizontal cut measurement with three manual displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Series cuts from the top edge of the panel This offer includes an equipment package. The following items and options are included in the price: - Sliding grid - Longitudinal fence, manual for vertical cut - Digital measuring display for horizontal cuts - 3 adjustable stops in the saw beam - TRK extraction unit SH 2,200 - Strip stop for recurring horizontal cuts - New ex-demonstration machine -

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. Ksdpemhhypjfx Aggsdu When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), WEINIG window production line comprises: Unirex 3000 machining center Univar 15 Kedpsh H Iyxofx Aggjdu Unitex 15

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Four-side planing machine Weinig Profimat 23 Fortec Working width: 230 mm Kdedsumxqropfx Aggeu Working height: 140 mm Number of spindles: 6 Spindle configuration: Bottom: 7.5 kW Right Left: 11 kW Top: 7.5 kW Top: 5.5 kW Bottom: 5.5 kW Pneumatic pressure rollers Feed speed adjustable via variator Drive via cardan shafts CE certificate

Gamybos metai: 1995, būklė: labai geros būklės (naudotas), Liniją sudaro šie elementai: 1) Weinig Profimat 23 frezavimo staklės 2) KOCH – T-100-B juostinis padavėjas (250 x 4550) 3) Weinig Uniplan frezavimo staklės 4) KOCH T-100-B juostinis padavėjas (250 x 7050) Ksdpohm Exdjfx Aggsdu 5) KOCH SF-3 dildavimo staklės 5a) Apatinis juostinis padavėjas atliekoms (prie dildavimo staklių, 300 x 6050) 5b) Šoninis juostinis padavėjas atliekoms (prie dildavimo staklių, 300 x 1800) 6) KOCH T-100-B juostinis padavėjas (250 x 5020) 7) KOCH T-100-A juostinis padavėjas (300 x 3050) 8) KOCH T-100-B juostinis padavėjas (300 x 3500) 9) KOCH T-100-B juostinis padavėjas (300 x 4530) 10) Weinig U2G frezavimo staklės 11) KOCH juostinis padavėjas (250 x 4050) Linija buvo naudojama labai mažai, beveik kaip nauja. Liniją sudarančių staklių pagaminimo metai – 1995. Be to, prie kiekvienų staklių pridėsiu komplektą Leitz firmos frezų, skirtų euro 68 profilio langams. Naujos linijos kaina šiuo metu viršija 1 mln. eurų.

Būklė: naujas, Gamybos metai: 2025, Roll diameter: mm 800 Max. cutting height: mm 400 Kdsdpfsglfv Dox Aggsu Fixed work table: mm 1290 x 800 Max. saw blade width: mm 54 x 0.9 Max. and min. blade length: mm 5530 / 5380 Motor power: kW 15 (HP 20) Extraction hoods: No. 2 Ø 120 / No. 1 Ø 100 Compressed air consumption (wheel braking and feed roller opening): bar 6 Net weight: kg 880 "Dedoubleur" (splitter unit) Feed belt height: mm 300 Stop fence length: mm 750 Roller diameter: mm 160 Max. roller opening from blade: mm 200 Max. stop opening from blade: mm 200 Infinitely variable feed speed: m/min 0–30

Būklė: nepatikrintas (naudotas), Grooving spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, plus VARIO table and trimming carriage ..... Machine professionally dismantled and in stock at our warehouse in 73447 Oberkochen. Video and photos were taken before dismantling. Technical Data Summary (Please inquire about any additionally included accessories) ..... Cross-cut saw ..... > Cross-cut saw electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.7 kW > Laser guideline for cutting section recognition > Axial adjustment travel: 150 mm NC axis, electronically infinitely adjustable > Radial adjustment travel: pneumatic, 8 positions for e.g. top edge rounding Rounding unit ..... > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Maximum tool diameter: 130 mm > Axial adjustment mechanically linked to cross-cut saw > Radial adjustment pneumatically controlled On/Off electronic length stop ..... Kjdpfx Agjx H Al Njgedu > Length: 4500 mm 1st Tenoning and Grooving Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Maximum tool diameter: 400 mm > Anti-spin counter, full clamping length is countered 2nd Tenoning and Grooving Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Maximum tool diameter: 400 mm > Anti-spin counter, full clamping length is countered Transfer belt ..... For transferring parts to the longitudinal processing unit, including double-part singulation before infeed into the longitudinal processing. 1st Profiling Spindle (Climb and Counter Direction) ..... > Position: vertical, right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm NC axis, infinitely adjustable > Radial adjustment travel: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically controlled to tool diameter 2nd Profiling Spindle ..... > Position: vertical, right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm NC axis, infinitely adjustable > Radial adjustment travel: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2004, automatic fan press after complete overhaul automatic Kdjdpfx Agolnanwjgsu