Juostinis pjūklas

SANDERS BMBS 220 H-G

Būklė: naujas, Bandsaw machine Brand: METALLKRAFT Model: BMBS 300 x 320 HA-DG Item No.: 3690041 Condition: New machine Cutting capacity (round): 300 mm Blade speed: 20-100 m/min, infinitely variable Standard features: Ppodpfx Ajilg Hdodzst - Fully hydraulic, semi-automatic design After starting, the machine automatically clamps, returns to the starting position after the cut, stops the saw blade, and opens the vice. - Cut sensor for automatic detection of material height - Horizontal vice, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Chip removal brush - Measuring stop with 1,000 mm scale - Coolant system - Operating manual

Būklė: naujas, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 165 x 310 mm Saw blade length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Ppodpehpktvsfx Adzet Machine weight: approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Coolant pump - Eccentric vice - Base frame - Saw blade - 400V plug (16A) The machine is delivered fully assembled and ready for immediate operation.

Būklė: naujas, Gamybos metai: 2026, For sawing, for example, stainless steel, tool steel, hollow profiles, and solid materials Two-pole drive motor enables band speeds of 30 and 65 m/min Saw blade tension is monitored electromechanically via a microswitch When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking on the cylinder required Saw arm inclined by 25°, resulting in longer blade service life Precise and robust blade guides with adjustable carbide plates After completion of the cutting process, the saw band stops automatically in the lower end position Saw arm lowering by gravity or manually Infinitely variable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Psdsg U Uv Rspfx Adzept Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Material feed table height: 925 mm Cutting capacities 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular horizontal (hollow profile): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular horizontal (hollow profile): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular horizontal (hollow profile): 90 x 90 mm Art. No.: 3680001 Location: Ex stock 54634 Bitburg - Immediately available -

Būklė: naujas, Cutting diameter: 225 mm Saw band length: 2480 mm Cutting width: 250 mm Cutting speed: 45 / 90 m/min Saw band dimensions: 2480 x 27 x 0.9 mm Ppedpfxjlb I Dao Adzst Cutting capacity at 45°: flat 135 x 185 - 145 x 150 mm Cutting capacity at 45°: round 150 mm Cutting capacity at 45°: square 145 mm Cutting capacity at 60°: flat 63 x 107 - 69 x 90 mm Cutting capacity at 60°: round 70 mm Cutting capacity at 60°: square 70 mm Cutting capacity at 90°: flat 240 x 160 - 250 x 110 mm Cutting capacity at 90°: round 225 mm Cutting capacity at 90°: square 185 mm Total power requirement: 0.75 / 1.1 kW Machine weight approx. 200 kg Space requirement approx. 1385 x 580 x 890 mm Technical Features: - Hydraulic system for controlled downfeed of the saw head - Automatic cut-off at end of cut - Powerful three-phase induction motor with 2 speeds and oil-bath gearbox - Saw bow, vise, and swivel components made of cast steel - Steel band guides with ball bearings - Quick-release vise - Front lever for locking the mitre adjustment - Coolant pump with aluminium housing - Large handwheel for easy blade tensioning - Pressure gauge to display band tension (600–1000 kg/cm³) - Emergency stop safety switch - Chip brush for cleaning the saw band STANDARD EQUIPMENT: - Mountable base cabinet - Coolant tank - Electric coolant pump - Length stop for serial cuts - Tools for blade change and adjustments - Chip removal brush - Hydraulic cylinder with feed control

Gamybos metai: 1992, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 29-0288, Offer 04612 Technical Data: - Cutting capacity at 90° round: 260 mm - Cutting capacity at 90° flat: 450 x 240 mm - Cutting capacity at 45° round: 230 mm - Cutting capacity at 45° flat: 240 x 200 mm - Machine mounted on original turntable - Saw band dimensions: 3660 x 25 x 0.9 mm Ppjdpjgin Ndsfx Adzet - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic lifting and lowering of the saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement approx.: W 2100 x H 1200 x D 1000 mm - Weight approx.: 500 kg

Būklė: naujas, Gamybos metai: 2025, Folding machines type ZGR-1400 are constructed and built to be exceptionally robust, making them well-suited for processing zinc, aluminum, and copper in common thicknesses. All in all, an excellent choice at an unbeatable price! The standard configuration offers a 145-degree bending angle, but upon customer request, we can also manufacture a press brake with a 165-degree bending angle. Press Brake 1400/2.0 incl. transport rollers Podpfx Aocpn Hbodzopt Technical Specifications: - Maximum working length: 1400 mm - Maximum sheet steel thickness: 2.0 mm - Bending beam: 24 mm - Weight of the hand-operated machine: approx. 190 kg - Cutting with shear along the entire working length - Upper beam can be raised in three positions - Maximum clear opening between beams: 80 mm - Delivery to Germany or Austria: 180 Euros - Optional rotary shear for 0.8 mm: 350 Euros - Delivery time: 2-4 days - Cash payment upon delivery - The rotary shear (max. cutting capacity up to 0.8 mm / steel sheet) - The machine complies with CE standards and comes with a 12-month warranty. We look forward to hearing from you!

Būklė: naudotas, Gamybos metai: 2011, Pjovimo skersmuo: 260 mm Juostos ilgis: 3340 x 27 x 0,9 mm Pjovimo sritis 90 laipsnių kampu: kvadratas 260 mm Pjovimo sritis 90 laipsnių kampu: plokščias 380 x 260 mm Juostos greitis: 37 / 74 m/min Pjūklo variklis: 1,5 kW Staklių svoris: apie 0,62 t Užimama vieta: apie 1,7 x 1,4 x 1,3 m Kampinis juostinis pjūklas - Pusiau automatinis Pjdpfjwkvq Hsx Adzopt - Dvigubas kampinis pjovimas - Medžiagos atpažinimas nuleidimo metu - Komplekte 7 juostiniai pjūklo geležtės

Būklė: naujas, Gamybos metai: 2026, CORMAK HBS275 Band Saw for cutting pipes, profiles, and bars is widely used in all locksmith workshops where precision, quality, and cutting speed are essential. The model is equipped with a swivel arm ranging from 0-60°, and the saw guides are based on carbide inserts. The frame construction ensures precise and quiet operation. Machine Features This horizontal metal band saw with a swiveling arm enables cutting on a plane perpendicular to the axis of the material as well as at any angle from 0 to 60°. The workpiece can be manually fed or handled by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide pads and bearings, significantly improving blade guidance, service life, straightness, accuracy, and cut quality. Carbide guidance greatly reduces wear on both the machine and the saw blade. The machine features an efficient coolant pump with a closed-circuit coolant system. The arm of the saw is made from a single cast iron piece, and together with the 27 mm-wide cutting blade, allows for full serial cutting of both profiles and solid materials. The vise is mounted on an adjustable bed and is fitted with a quick-release clamp. The blade guides are outfitted with hard metal — carbide inserts — and a rolling bearing system. These CARBIDE INSERT GUIDES are responsible for the precision and straightness of the cut. The cast iron work table, fixed to the base, comes with a swivel arm and a separate control panel. During the cutting process, the primary cutting movement is the movement of the cutting blade, while the arm descends as the feed stroke. The descending speed of the arm (cutting speed) is regulated using a hydraulic cylinder. Feed speed is adjusted on the saw’s control panel. You can select between two blade speeds: 37.5 or 75 m/min. Once the arm reaches its lowest position (after cutting the workpiece), the saw blade drive switches off automatically. Safety is ensured by blade covers and micro-switches that stop the motor at the end of the cutting cycle or when any guard is opened. Additional protection includes automatic shut-off of the saw if the blade breaks. The machine is powered by a worm gear motor. The motor with a thermal fuse protects against overheating during operation. Technical Data: TOTAL POWER: 1.5 kW POWER SUPPLY: 400V 50Hz ARM DESCENT CONTROL: hydraulic cylinder BLADE DIMENSIONS: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VISE BASE HEIGHT: 900 mm MACHINE DIMENSIONS (ARM RAISED) (L x W x H): 1720 x 800 x 1800 mm WEIGHT: 215 kg Cutting Capacity (Diameter / Dimensions in mm): ANGLE ROUND RECTANGLE SQUARE 0° ø220 260 x 140 200 x 200 45° R ø160 160 x 140 160 x 160 60° R ø100 120 x 100 100 x 100 Price does not apply to machines purchased in Poland. Pedpfx Adeudi Unozspt

Būklė: naujas, Gamybos metai: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85° Lower tools: 50, 35, 22, 16 Frame gap (B): 2550 mm Approach speed: 130 mm/s Working speed: 8 mm/s Return speed: 120 mm/s Crowning: Manual (CNC motorised version available at extra cost) X-axis travel: 750 mm X-axis speed: 250 mm/s Back gauge fingers: 2 pcs Front support arms: 2 pcs Hydraulic tank capacity: 180 litres Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Throat depth (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X), optionally expandable with R+Z axes Ppedpfxjgu N Ale Adzot Eurostamp 2067 lower tools (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85° Narrow table All-steel welded construction Promecam quick-release clamping system CNC-controlled motorised back gauge (X: 750 mm) Adjustable back gauge fingers Metric and inch system selectable Ground and chrome-plated cylinders Swivelling control panel Foot pedal operation with anti-panic stop & emergency shutdown Side guards (secured with limit switches) Light curtain at the rear of the machine (900 mm) DSP laser finger protection system at the front (CE-compliant) BOSCH/REXROTH or HOERBIGER/HAWE hydraulics, BOSCH/REXROTH or ECKERLE hydraulic pump Sliding front support arms (2 pcs) Electrical components by: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Paint finish: RAL 7035, RAL 5015 Optional accessories available at extra cost: - CNC-controlled R-axis (250 mm) - CNC-motorised crowning - Servo drive motors for back gauge system for X+R axis (Mitsubishi) - Custom paint finish on request Documentation in German or English CE conformity

Būklė: naudotas, Gamybos metai: 1968, Technical details: Pedpevpfzyofx Adzopt Drilling capacity in steel (diameter): 40 mm Throat depth: 380 mm Drilling stroke: 240 mm Spindle taper: MT 5 Spindle speed: n.a. rpm Feed rates: 0.1 / 0.14 / 0.2 / 0.28 / 0.4 mm/rev (manual + automatic) Max. distance spindle/table: 200 - 800 mm Table clamping surface: 540 x 730 mm Rotatable table: 360° Drill table adjustment: 600 mm (manual) Column diameter: Ø 220 mm Base plate clamping surface: W: 510 x L: 510 mm Total power requirement: 4.0 kW Machine weight approx.: 1300 kg Approx. machine dimensions (LxWxH): 1.2 x 0.95 x 2.35 m Operation via control panel and/or footswitch Mechanical thread cutting Incl. machine vice