Juostinis pjūklas

CORMAK HBS260 + 2 piły M42 + 5L Emulgol

Sąlyga: naujas, Gamybos metai: 2025, CORMAK HBS320 for double-sided mitre cutting in the range from -45° to +60°. The design of the machine is based on solutions and projects by Polish engineers. Its precision and manufacturing accuracy place it at the forefront of band saws offering cutting widths up to 320 mm. A major advantage of this machine is the latest generation hydraulic cylinder. The machine features a reinforced vise base and quick-release vise function. Machine features The CORMAK HBS320 metal band saw allows for cutting material at any angle between -45° and +60°. The material to be cut can be fed manually or using any external feeder. The cut feed is gravity-assisted, controlled by hydraulic oil flow within the cylinder. The operator starts the machine with a start button and sets the desired cutting speed. After the cutting cycle completes, the machine stops automatically and the operator raises the arm to the starting position. The saw arm is made from a heavy-duty, one-piece grey cast iron casting. Together with a 27 mm wide blade, it is perfectly suited for series cutting of structural, stainless, and tool steels. The vise is set in an adjustable bed and equipped with a quick-release clamp. The blade guides are fitted with ball bearings and carbide inserts, ensuring excellent cutting precision and straightness. This greatly affects blade guidance, durability, accuracy, and cut quality. Carbide guidance significantly reduces machine and blade wear. The base is a rigid, steel-welded frame. Inside is a separate coolant reservoir with an electric pump. The top of the base is tray-shaped, channeling coolant and collecting chips generated during cutting. Also attached to the base is a robust cast iron worktable with a swiveling arm and control panel. Feed speed can be regulated from the control panel. Two blade speeds are available: 44 and 88 m/min. In the lowest arm position—after the cut—the blade drive is switched off automatically. Safety is ensured by blade covers and micro-switches that stop the motor when the cutting cycle is complete or any guard is opened. Additional protection involves automatic shutdown if the blade breaks. Technical data Ø MAX - 260 mm / straight cutting H x W MAX - 320 x 160 mm / straight cutting POWER SUPPLY - 3-phase 400V TOTAL POWER - 1.5 kW ARM DESCENT CONTROL - hydraulic cylinder BLADE SIZE - 2740 x 27 x 0.9 mm BLADE SPEED - 44 / 88 m/min VISE BASE HEIGHT - 920 mm DIMENSIONS - 1400 x 880 x 1550 mm WEIGHT - 280 kg Cutting parameters Angle 0º -----ø260 320 x 160 255 x 255 45º R ø210 210 x 200 210 x 210 Dedpfsi D Dgwex Ab Sokg 60º R ø135 135 x 130 130 x 130 45º L ø160 220 x 130 160 x 160 All prices are NET and do not include transport costs. For more information, please contact us by phone or email. We also invite you to browse our full offer on our website.

Sąlyga: naujas, ašių konfigūracija: 3 ašys, pirmoji registracija: 03/2023, krovimo vietos ilgis: 16 160 mm, krovinių skyriaus plotis: 2 550 mm, krovos erdvės aukštis: 3 770 mm, bendras ilgis: 16 160 mm, bendras plotis: 2 550 mm, bendras aukštis: 3 750 mm, pakaba: oras, padangos dydis: 245 / 70 R17.5, ratų bazė: 1 410 mm, spalva: raudona, Gamybos metai: 2022, Įranga: galinis keltuvas,

Sąlyga: naujas, Machine in stock and immediately available Double Mitre Metal Bandsaw S 255 DG Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45°, right: 220 mm / 210 x 210 mm Cutting capacity flat 45°, right: 220 x 200 mm Cutting capacity round / square 45°, left: 230 mm / 200 x 200 mm Cutting capacity flat 45°, left: 230 x 200 mm Cutting capacity round / square 60°, right: 135 mm / 135 x 135 mm Cutting capacity flat 60°, right: 135 x 135 mm Saw blade dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor output S6 40%: 2.2 kW Working height: 930 mm Features: - Double mitre band saw with swiveling saw bow from left -45° to right +60° - Ideally suited for cutting pipes, profile materials as well as solid material made of stainless steel, iron, etc. in commercial applications - Large, heavy-duty cast saw arm for low-vibration operation - Two band speeds for optimal adjustment to the workpiece - Hydraulic lowering cylinder - Quick-release vice for easy and fast clamping of workpieces - Precise, adjustable saw band guides for optimal cutting results - CE/IEC certified, German documentation and German service Scope of delivery: - Saw blade - Material stop - Pressure gauge (band tension) - Carbide saw blade guides - Vice with quick clamping device - Integrated coolant system - Hydraulic bow lowering - Motor protection switch Dksdod R Sipepfx Ab Seg - Automatic cut-off - Base frame

Sąlyga: naujas, Semi-automatic band saw for cutting solid bars and medium-sized profiles with high efficiency and excellent cutting precision. The robust structure provides the machine with the required rigidity and precision to the cutting group. The band drive is powered by a two-speed motor and a special gearbox with a bronze gear and a hardened, ground worm screw. Properly sized flywheels. Robust band guides made with sealed guide bearings and adjustable carbide (Widia) plates. Blade tension achieved via an electromechanical device with blade rotation microswitch control. Safety devices against accidents on the flywheel cover guard and the blade. Cutting thickness 1.5 mm. Cutting range 60° left / 60° right. Adjustable stop for repetitive cuts of the same length. Dkedpfxjfibd Ts Ab Sjg Blade cleaning device with brush. Hydraulic power unit motor 0.37 kW. Electric pump 0.09 kW for band cooling. Vice jaw height 200 mm. Vice jaw length 185 mm. Working table height 760 mm. Machine weight 820 kg.

Sąlyga: naujas, Cutting Range: - Round 0°: 170 mm - Square 0°: 150 x 150 mm - Flat 0°: 150 x 190 mm - Round 45°: 125 mm - Square 45°: 95 x 120 mm Working height: 870 mm Cutting speeds: 40 / 80 m/min Saw blade: 2080 x 20 x 0.9 mm Coolant pump: 100 W Saw motor: 0.75 kW Connection: 400 V Dimensions (L x W x H, approx.): 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow swivels up to 45° - Equipped with two blade speeds for optimal adjustment to the workpiece - Ideal for cutting pipes, profiles, and solid materials made of stainless steel, iron, etc. - Generously sized saw arm for low-vibration operation - Hydraulic lowering of the saw arm via hydraulic cylinder - Low-noise operation thanks to robust design Dodpfx Aoilk H Teb Sekg - Automatic shut-off at end of cut via micro limit switch - Quick-release vice for easy and fast clamping of workpieces - Precise, adjustable blade guides for optimal cutting results - Coolant system with pump - Includes base frame - CE/IEC compliant, German documentation and German service Scope of Delivery: - Bi-metal saw blade 2080 x 20 x 0.9 mm, 6/10 TPI - Blade tension adjustable via pressure gauge - Quick-release vice - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic cut-off at end of cut - Base frame

Sąlyga: naudotas, Metal band saw Hans Schreiner MBS270, good condition, 1.5 kW, 2450 mm band length, 227 kg Dkedpfx Abewzzgno Ssg Prices subject to change without notice. Errors, misprints, and typographical mistakes excepted.

Sąlyga: naujas, Gamybos metai: 2024, Manual bandsaw machine for cuts from 0° to 60° to the right. Hydraulic blade tension, bow handle with control button. Combination blade guides with side bearings. Carbide cutting inserts and an upper bearing. Manual cutting, or automatic cutting possible without operator, with the own weight of the saw bow controlled by hydraulic brake; afterwards, the bow is raised manually back to the desired position. Dodogculvjpfx Ab Sokg Manual vice for fast and precise clamping of the workpiece. Bow rotation from 0° to 60° to the right with locking positions, precise angle measurement, manual quick-clamping vice. Millimeter graduation scale rod. Coolant tank integrated on the upper side of the machine base, with a drain nozzle and electric coolant pump for lubrication on both sides of the blade guides. Control voltage 24 VAC, main switch and control system. Maximum current and short-circuit protection. Connection voltage: 400V/50Hz/3Ph standard. Machine color: yellow RAL 1018 and grey RAL 7036. You are welcome to view the desired system in our production/demo hall at any time. Please do not hesitate to contact us. Plantec Maschinen GmbH

Sąlyga: geras (naudotas), Gamybos metai: 2002, Cutting diameter: 320 mm Saw band length: 4160 mm Cutting width: 610 mm Maximum cutting length: 500 mm Vise opening: max. 620 mm Infinitely variable saw blade speed: 15–120 m/min Working height: 760 mm Saw blade dimensions: 4160 x 34 x 1.1 mm Control: Siemens Siematic OP3 Total power requirement: 2.6 kW Machine weight: approx. 1.96 t Space requirements: approx. 2.55 x 2.45 x 1.5 m Well-maintained automatic mitre band saw with Siemens Siematic OP3 control for quantity and cut length, hydraulic frame vice, and stepless saw blade speed adjustment. The machine can be used in both automatic cycle and simple manual single-cut mode. It was previously operated in single-piece production for narrow parts, ONLY approx. 3 hours per week! Estimated operating hours = 3400. Dsdpfov Htimox Ab Sskg WIDE cutting capacity at 90° flat up to 610 mm! Easy miter adjustment. Cutting range at 0° / 90°: - Round: 320 mm - Flat: 610 x 320 mm Cutting range at 75°: - Round: 320 mm - Flat: 350 x 200 mm Cutting range at 60°: - Round: 300 mm - Flat: 300 x 200 mm Cutting range at 45°: - Round: 260 mm - Flat: 250 x 180 mm Cutting range at 30°: - Round: 160 mm - Flat: 150 x 150 mm Please note: New price approx. €28,000; comparable German machines significantly more! This is a used machine, therefore we sell under exclusion of any warranty. STOCK-HOLDING DEALER WITH OWN 1600 m² WAREHOUSE.

Sąlyga: naujas, Gamybos metai: 2025, The ZX7045 B1 DRO milling and drilling machine is an advanced tool designed for precise metalworking. It excels in drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, as well as tapping threads up to M12 mm. With a milling capacity of up to 80 mm width and keyway milling up to 22 mm, this machine ensures versatile use. The ZX7045 B1 DRO variant is distinguished by an automatic spindle feed, increasing operational efficiency. Additionally, it is equipped with digital readout for enhanced accuracy, and a cooling system to maintain optimal temperature during machining. This machine is ready for immediate use and available directly from stock. It is ideal for professionals seeking high quality and performance in metalworking. Product Features: - HEAVY, STURDY CAST IRON CONSTRUCTION Dodpfx Absud H H Uo Sekg - AUTOMATIC SPINDLE FEED - MILLING HEAD HEIGHT IS ADJUSTED ON THE SUPPORT, NOT THE COLUMN - ADDITIONAL LIQUID COOLING - MASSIVE CROSS TABLE WITH PRECISELY GROUND SURFACE - DOVETAIL GUIDEWAYS - QUIET OPERATION THANKS TO GROUND GEARS - LEFT AND RIGHT SPINDLE ROTATION - ROTATING HEAD +/- 90° - ADJUSTABLE HEAD HEIGHT - DIGITAL READOUT - Optional base available TECHNICAL SPECIFICATIONS: DRILLING CAPACITY IN STEEL: 32 mm DRILLING CAPACITY IN CAST IRON: 45 mm FACE MILLING CUTTER DIAMETER: 80 mm END MILL CUTTER DIAMETER: 28 mm SPINDLE SPEEDS: 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm (6/12) SPINDLE TAPER: MT4 SPINDLE TRAVEL: 125 mm (AUTOMATIC FEED) WORK TABLE DIMENSIONS: 820 mm x 240 mm BASE DIMENSIONS: 580 x 600 mm MAX SPINDLE TO TABLE DISTANCE: 445 mm SPINDLE TO COLUMN DISTANCE: 260 mm TRAVEL X/Y/Z AXIS: 515/175/430 mm QUILL FEED RATE: 0.12; 0.18; 0.25 mm/rev HEAD SWIVEL LEFT/RIGHT: 90° MOTOR POWER: 1.8 kW (2.5 HP) POWER SUPPLY: 400 V WEIGHT: 350 kg Available Accessories: - Drill chuck arbor MK4/B18 - Digital readout - Hand tools - Drill chuck 3-16 mm/B18 - Reducing sleeve MK4/MK3 - Reducing sleeve MK3/MK2 - Operating manual in English

Sąlyga: naujas, NEBES TM 275 Bandsaw – 400 V Three-phase, NEW “CE” Induction motor Cast iron frame Adjustable cutting angle from 0° to 60° Fully cast iron structure Electric pump for blade lubrication and cooling Blade tension gauge in oil bath Front controls and two cutting speeds Selector switch for excluding the coolant pump Blade guide with carbide pads (H.M.) Round cutting capacity at 0°: 220 mm Square cutting capacity at 0°: 200 x 200 mm Rectangular cutting capacity at 0°: 230 x 185 mm Round cutting capacity at 45°: 150 mm Square cutting capacity at 45°: 150 x 150 mm Rectangular cutting capacity at 45°: 150 x 200 mm Round cutting capacity at 60°: 90 mm Square cutting capacity at 60°: 90 x 90 mm Rectangular cutting capacity at 60°: 90 x 120 mm Motor power: 1.3 HP Voltage: 400 V Blade dimensions: 2450 x 27 x 0.90 mm Weight: 265 kg Dedsh Nm Ncepfx Ab Sekg