Briketavimo presas

Ruf Ruf 1100

Sąlyga: geras (naudotas), Gamybos metai: 2009, veikimo valandos: 37 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1653, bendras plotis: 2 000 mm, bendras aukštis: 2 100 mm, bendras ilgis: 3 000 mm, bendras svoris: 5 500 kg, Hydraulic system: - Power-regulated axial piston twin pump • Max. operating pressure: 300 bar • Drive motor: 55 kW, 400 V, 50 Hz, 3-phase AC, 1,500 rpm → Motor designed as an energy-saving EFF1 efficiency class motor • Protection class: IP 54 - Valve voltage: 24 Volt DC - Hydraulic tank (950 l) with separate cooling and fine filter circuit, 5µm filter unit, 2.2 kW drive - Large double return filter integrated in tank, 10µm filter unit – tank integrated into the supporting frame Electrical design: - Machine control cabinet according to DIN EN60204-VDE 0113, protection class IP 54 - Input voltage: 400 Volt, 50 Hz - With lockable main switch inside the enclosure - Emergency stop button in the control cabinet - Control voltage: 24 Volt DC - Freely programmable control (PLC) SIEMENS S7-200 - With Siemens TP 177B operator and display panel • Display and modification of operating states and values Iaedexxk D Ujpfx Af Ijl • Performance of control operations • Fault/alarm display - Automatic start/stop via light barrier integrated in the feed hopper - All initiators operate contactlessly - Gear motors and pump motor with thermal winding protection Material feed: - Loading hopper with filling area of 800 x 400 mm - Sturdy sheet steel construction with reinforcements - Hopper volume: approx. 150 liters - Agitator to prevent bridging, 0.55 kW drive - Feed screw with 1.5 kW drive - Feeding time controlled automatically by PLC Pre-compression: Vertically arranged, hydraulically operated. - Pre-compaction pressure adjustable via TP 177B - Dustproof control system, utilizing the RUF-developed and patented linear displacement measurement Main compression: Horizontally arranged, hydraulically operated. - Pressing pressure adjustable via TP 177B, up to 300 bar - Hydraulic cylinder 350, pressing force up to 300 tons Pressing performance: - Depending on settings and material, up to 600 units per hour (approx. 800 – 1,000 kg/h) Briquette dimensions: - 240 x 70 mm - Briquette length: 70 – 110 mm; depending on settings and the type and bulk density of the material to be briquetted - Max. specific pressing pressure approx. 1,776 kg/cm²

Sąlyga: naudotas, Weinig Unicontrol 10 (UC 10) angle processing system for the manufacturing of windows, components, and doors. Suitable for frame, series, or individual part production, featuring 2 tenoning and mortising spindles, including Oertli tool set. - Units: 1. Cross-cut saw, NC-axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and mortising spindle, NC-axis, ø 50 mm, 15 kW, Clamping length: 640 mm (8 x 80 mm) 3. Second tenoning and mortising spindle, NC-axis, ø 50 mm, 11 kW, Clamping length: 400 mm 4. Profiling spindle 1, NC-axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Horizontal profiling unit from above, 3 kW 6. Profiling spindle 2, NC-axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC-axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profiling unit, vertical right, 3 kW 9. Profiling unit, vertical right from above, 3 kW 10. Profiling unit, horizontal from below, NC-axis 3 kW - Double part package - Counter-milling package with counter-milling carriage - Automatic turning system - NEXUS PC control - CNC-controlled stop for length - Studio window setup - Unit for edge rounding from below with cross-cut saw Iedpov Ag Tdofx Af Ijal - Glazing bar support rail - Including extraction pipe system - Including Oertli tool set - Further technical data and tool drawings available upon request.

Sąlyga: geras (naudotas), Gamybos metai: 1996, Four-Sided Planer Weinig Unimat 23 – German-made – Serrated table – Year of manufacture: 1996 – Driven feed rollers in the table Iasdpfsh Dwl Dox Af Ijl TECHNICAL SPECIFICATIONS: Planing width: 230 mm Planing height: 160 mm Serrated table Spindle diameter: 40 mm 1st bottom spindle: 7.5 kW 2nd right spindle: 7.5 kW 3rd left spindle: 7.5 kW 4th top spindle: 11 kW 5th bottom spindle: 7.5 kW Infinitely variable feed speed: 6–36 m/min Feed motor power: 5.5 kW Six upper steel feed rollers Two upper rubber feed rollers Three driven rollers in the table Pneumatic feed pressure Pneumatic pressure shoe Spindles with brakes Infeed table length: 1970 mm Electric height adjustment Centralized (split) lubrication Extraction port diameter: 140 mm Machine dimensions (L/W/H): 410 / 200 / 180 cm Weight: approx. 3000 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2021, Tekinimo ilgis: 1.500 mm Maks. tekinimo skersmuo: 670 mm Maks. pagrindinio veleno apsukos: 5.000 aps./min Maks. priešinio veleno apsukos: 5.000 aps./min Frezavimo mazgo įrankio tvirtinimas: CAPTO C6 Komplektuojama su HAINBUCH griebtuvu su keitimo sistema Komplektuojama su strypų padavėju Komplektuojama su KNOLL drožlių transporteriu / juostiniu filtru Isdpsx Nm Uasfx Af Isal Komplektuojama su įvairiais įrankiais Komplektuojama su pilna dokumentacija

Sąlyga: geras (naudotas), Juostinių pjūklų linija dideliems rąstams 1. Rąstų transporteris 2. Buferinė rąstų platforma ir vieneto padavėjas 3. Rąstų transporteris ir centrinis padavimas su vartytuvu 4. Söderhamn AKE 245A dvigubas redukcinis juostinis pjūklas (ARI 6 peilių galvutės) Iajdoikvlijpfx Af Ijl 5. Lentų atskyrėjas su kaladėlių vartytuvu 6. Kaladėlių šoninis padavimas 7. Kaladėlių padavimas 8. ARI BKR-600 9. ARI DS-75 daugiapjūklė 10. ARI KT-52 kraštuotuvo linija Kaina: 2 100 000 SEK, esamos būklės vietoje. Linija pilnai komplektuota, bet ne visas konvejeris apatiniame aukšte. Bruks 1503M kaladėlių smulkintuvas. Nėra elektros paskirstymo spintų energijos (nėra PLC programinės įrangos). Galima išmontuoti ir pakrauti UJ Trading AB. Lentpjūvė randasi Švedijoje.

Gamybos metai: 2001, veikimo valandos: 123 h, Sąlyga: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 123, Chip silo, diameter: 5 m, height: approx. 8 m, net capacity: 42 m³. Suitable for the storage of sawdust. Inspection possible at our warehouse in H-2013 Pomáz at any time, by prior arrangement. Iedpfx Afsftdv Us Isal

Gamybos metai: 2011, Sąlyga: labai geros būklės (naudotas), This is a complete plant for house construction. Prices for each item are listed individually. Comprising the following elements (see attached document): Images will follow and are already included in the attached document. Table 1 (Positioning and clamping the stud frame) €34,500 • Adjustable longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity Table 2 (Placing and fastening the first sheathing layer) €25,300 • Longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600 • Longitudinal conveyor with 3 hinged belt conveyors Table 3 (Placing the second sheathing layer, fastening, and flipping the element onto the next table) €35,650 • Longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity • Hydraulic turning device Table 4 (Installation of electrical systems and insulation) €34,500 • Cross transfer with rollers and sheathing • Table cross-travel function • Connections for compressed air and electricity • Hydraulic turning device Table 5 (Placing the first sheathing layer and fastening the second side) €32,775 • Longitudinal conveyor with 3 hinged belt conveyors • Cross transfer with rollers • Pneumatic cross-clamping • Connections for compressed air and electricity Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600 • Longitudinal conveyor with 3 hinged belt conveyors Table 6 (Placing and fastening the second sheathing layer) €28,750 • Longitudinal conveyor with 3 hinged belt conveyors • Pneumatic cross-clamping • Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 • Longitudinal conveyor with 3 hinged belt conveyors • Hydraulic tilting unit • Table cross-travel unit • Overhead guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 (placing the first sheathing layer) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 (placing the second sheathing layer) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 (placing the first sheathing layer on the second side) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 (placing the second sheathing layer on the second side) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Wall storage 1: 12 m long, 24 bays €11,500 Wall storage 2: 12 m long, 20 bays Iasdpfx Afju D Amge Iol Vacuum lifter with column-mounted slewing crane €9,200 1 traverse, 2 t Abus €20,125 1 traverse, 2 t

Sąlyga: naudotas, Gamybos metai: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Fully Automatic Wet Deburring Machine for Sheet Metal Model EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Serial No. 780063 _____ Grinding width approx. 1,380 mm Roller width: 1,400 mm Max. workpiece height: 1 – 70 mm Continuously variable feed speed: approx. 1.5 – 8 m/min Comprises 5 processing units: Oscillating sanding roller for abrasive cloth or non-woven abrasives Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ijdpfxjt Hw Iie Af Isal Ø 350 mm, drive 2 x 5.5 kW, for laminated or non-woven abrasive flaps, adjustable for wear. Brush roller unit for two rollers with Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, ideal for removing oxide layers. Wet grinding unit with integrated band filter system and closed water circuit, installed under the conveyor belt and easily retractable from the machine. Washing and drying system, designed for a minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece transport takes place frontally via a continuous conveyor belt (min. part length 350 mm) with vacuum suction system (300 mm width on the right) and a magnetic track with a width of 300 mm, to hold small parts as short as 80 mm. Frequency converter for stepless speed control of the abrasive flap brushes from 250 – 1000 RPM (position 2, top), also for conveyor belt feed. Control panel with clear operation and digital roller position display, 4 ammeters for monitoring roller drives, indicator LEDs. Quick-change mechanism for sideways removal of the abrasive flap brushes plus various spare rollers with non-woven abrasives and brush inserts. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition : good to very good Delivery : ex stock – as inspected Payment : strictly net – after receipt of invoice

Sąlyga: naudotas, Four-sided planer REX, planing width 51 cm, maximum planing height 20 cm, 2 feed speeds, vertical spindles with 2 rotational speeds, electric table lifting device. Iedorxf Smjpfx Af Ioal

Gamybos metai: 2005, Sąlyga: naudotas, HIT mechanisation for KVH and BSH production Iodpfx Afopiurms Ioal for components up to width 600 mm, height 300 mm, length 18 m consisting of various parts available individually or as a complete package - Layer cross pusher - Various cross conveyors - Workpiece roller conveyors - Heavy-duty roller conveyors - 5 lifting tables each mounted with 2 cross conveyors on transfer trolleys - Stacking machine - Control cabinets - Roller tracks - Travelling timber crosscut saw with waste disposal