Temperatūros valdymo blokas

REGLOPLAS P140 M

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 17 000 h, spaudimo jėga: 220 kN, varžto skersmuo: 50 mm, Year: 2018 Control type: CC300 Operating hours: 17,000 h Storage location: MECA PLASTIC Availability: IMMEDIATE Clamping force: 220 T Opening stroke: 530 mm Tie bar spacing: 620 mm x 620 mm Platen dimensions: 900 mm x 900 mm Gjdpfxevtm Uie Abdjbg Min./max. mould height: 250 / 600 mm Max. distance between platens: 1,220 mm Screw diameter: 50 mm Screw L/D ratio: 20D Volume: 432 cm³ Injection pressure: 2,002 bar Motor power: 29 kW Heating power: 15.3 kW Clamping unit weight: 11.3 T Length: 6.30 m Width: 1.80 m Height: 2.10 m Core pull: NO Robot interface: YES Bi-metallic screw: YES

Sąlyga: naudotas, Gamybos metai: 2019, Year: 2017 Gsdpfov I Uw Ijx Abdebg Control type: CC300 Operating hours: 20,000 h Storage location: MECA PLASTIC Availability: AVAILABLE Clamping force: 160 t Opening stroke: 460 mm Tie bar spacing: 520 mm x 520 mm Platen dimensions: 760 mm x 760 mm Minimum/maximum mould height: 250/600 mm Maximum daylight between platens: 1,060 mm Screw diameter: 35 mm Screw length: 20D Shot volume: 154 cm³ Injection pressure: 2,000 bar Motor power: 21 kW Heating power: 9.2 kW Clamping unit weight: 8.4 t Overall length: 5.90 m Overall width: 1.70 m Overall height: 2.20 m Core pull: NO Robot interface: YES Bimetallic screw: YES

Sąlyga: naujas, Gamybos metai: 2025, General: - Maximum temperature range: 150°C for oil (heat transfer fluid) - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Seal-less immersion pump - Max. flow rate: 60 l/min - Max. pressure: 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank capacity: approx. 20 litres - Fittings made of brass/stainless steel - Manual oil filling - Mechanical level control - Indirect cooling system (shell and tube heat exchanger) - Cooling capacity: approx. 40,000 kcal/h - Pressure gauge - Bypass - Solenoid valves for cooling Electrics and Control: - Electronic PCB controller - Solid state relays - Safety thermostat Gsdpfsddv Itsx Abdobg - Sensor break monitoring - Power cable with plug Available in approx. 4 weeks!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, HAITIAN MARS II MA10000/6800 Universal ServoDrive (2016) Only 17,000 hours in automatic cycle! Main Technical Parameters: Clamping force: 10,000 kN Opening stroke: 1220 mm Minimum mould height: 500 mm Maximum mould height: 1160 mm Daylight between platens: 2380 mm Tie bar spacing: 1160 x 1160 mm Platen size: 1650 x 1700 mm Screw diameter: 90 mm L/D ratio: 24.4 mm/mm Shot volume: 2721 cc Shot weight (PE): 1986 g Injection speed: 544 g/s Max. injection pressure: 2280 bar Machine dimensions: 12.5 x 2.49 x 2.75 m Machine weight: 50,000 kg Equipment and Features: 423 - Proportional valve for injection (Rexroth) S01 - 8x hydraulic core pulls (4x fixed platen, 4x moving platen) with servomotor 432 - 8x core relief 662E - 16x integrated hot runner zones Gbsdpewtgltsfx Abdeg 623 - Acoustic alarm 237C - Clamping force safety sensor 430C - 8x pneumatic cascade controls Cylinder and screw designed for processing 30% glass-filled materials 419A - Parallel movement: opening/ejector or opening/core 667 - 6x freely programmable inputs/outputs Flow meter with 6 pipes + hoses + cable trays + valves + filters + nozzles + operating components, all to Lamky specification (Stäubli quick couplings) Total sockets: 4x230V/16A, 2x400V/16A, 4x400V/32A Locating ring diameter (fixed and moving side): 250 mm 8x pressure gauges for core pull circuits 409A - 8x pneumatic valves (8 mm, 3/2 way; 4x fixed, 4x moving side) E65 - Interface for temperature controllers (4 zones) 236 - Automatic ejector bar retraction (operator side)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 32 827 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 230239, spaudimo jėga: 2 000 kN, varžto skersmuo: 40 mm, darbinio tūrio: 201 cm³, įpurškimo slėgis: 2 juosta, injekcijos svoris: 184 g, bendras svoris: 11 200 kg, Here, as a specialist dealer in injection moulding machines, we offer the following well-maintained used injection moulding machine for sale. Naturally, we are also interested in purchasing well-maintained injection moulding machines from model year 2010 onward. We have been a wholesaler for used injection moulding machines for over 25 years. Current note: Tax advantage for used machines From 01.07.2025, used machines will also be eligible for a special depreciation allowance of 30% per year. In addition to the lower price compared to new machinery, you can claim the same depreciation rates as for new machinery. Keyword: Growth Booster (§ 7 para. 2 EStG-E) Arburg 1500T 2000-400 Rotary Table Vertical Machine Machine No. 230239 Complete documentation, including the machine card, can be downloaded. Control system: Selogica Year of manufacture: 2014 * Total machine cycles: only 1,469,728 * Automatic operating hours: 32,827 h Clamping unit Platen distance: 700 mm Clamping force: 200 tons / 2000 kN Mould installation height: 400 mm Table diameter: 1500 mm Rotation angle: 180° Rotation time: 2.4 s min. Permissible weight on rotary table: 1050 kg Ejector force: 45 kN / ejector stroke 175 mm Injection unit Screw diameter: 40 mm Stroke volume: 201 ccm Shot weight: 184 g Injection pressure: 2000 bar Extras * 2-station rotary table, 180° alternating forward/backward, driven by a servo-electric motor and equipped with a hydraulic locking bolt for precise centering of the turntable at end positions; safety separation between the clamping and loading areas, with adjustable height on the rotary table for mould base alignment; provision for media supply lines and connections for the mould bases - Rotary table diameter: 1500 mm - Maximum clamping force: 2000 kN - Injection unit in accordance with EUROMAP 400 - Screw diameter: 40 mm - Special ergonomic rotary table model with the following features: © - Corrosion protection treatment for rotary table (VE 574/90) © - Two water circuits © - Three hydraulic connections for needle shut-off system © - Three core pulls © - Each station: one core pull and two temperature control circuits © - Six mould temperature control circuits © - Twelve-zone mould heating circuits © - Kistler internal pressure sensors (2x) © - Temperature monitoring for start-up parts Weight: 11,200 kg Power: 22 kW motor | Heating capacity: 9.4 kW (5 zones) | Connection rating: 100 A The machine is offered tested and fully functional, with start-up warranty – fully tested prior to dismantling. About our machines and company: - We sell only machines from our own continuous production, stocked at our warehouse in Hanover - All machines offered are tested and inspected before dismantling Gedpfx Aouuf Iasbdjbg - We do not sell insolvency assets and are NOT intermediaries trading with third-party goods - All machines come from successful companies for whom regular maintenance and care are a given - All listed machines are available for inspection at our warehouse

Sąlyga: naujas, Naujas įrenginys MASS International NS3 Speciale Kampinis konvejeris su separatoriumi greitas pristatymas galimas Pavyzdys kaip parodyta nuotraukoje: L formos konvejeris su dvigubu ritininiu separatoriumi Įkrovos dalis 600 mm Pakilimo dalis 1300 mm Naudinga juostos plotis 450 mm Išorinis plotis 505 mm (be variklio) Reguliuojamas išleidimo aukštis 750 - 1050 mm Kampas reguliuojamas tiek įkrovimo dalyje, tiek nuolydžio dalyje Juoda PU juosta su pertvaromis Pertvarų aukštis 20 mm Atstumas tarp pertvarų 500 mm Juostos greitis 3 m / min Su ratukais ir stabdžiais Šoninės gaudyklės įkrovos dalyje Taip pat galima gauti kaip kampinį konvejerį su Supergrip juosta ir separatoriumi (žr. paskutines dvi nuotraukas) Godpfod Tidxox Abdebg Dvigubas ritininis separatorius su dengtine diržo pavara dengtas Super Grip danga Reguliuojamas iškrovimo lovelis

Gamybos metai: 2012, Sąlyga: labai geros būklės (naudotas), Years: 1x 2011 1x 2006 2x 2008 Gsdpou Ap Twsfx Abdebg (It is possible to purchase up to 6 units)

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, In this offer, you are purchasing a used UV LED flatbed printer "Mimaki UJF-7151 plus II". Item for sale: 1 x Mimaki UJF-7151 plus II with the following features: Manufactured in 06/2021 Condition: This offer is for a pre-owned device, which may show signs of use (such as minor scratches or yellowing). The device has been tested for functionality. Godpjwfqbisfx Abdebg Packaging and Shipping: You are welcome to inspect the device during our business hours. Please arrange an appointment beforehand! Seaworthy packaging and worldwide shipping are available upon request! Before shipping or pickup, a video recording of the functionality test will be provided for you. For further information, you are welcome to contact us personally.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, Clamping force: 900 t Screw diameter: 90 mm Shot weight: 1576 g Distance between tie bars (vertical): 1000 mm Distance between tie bars (horizontal): 1180 mm Shot volume: 1732 cm³ Type: Horizontal Gbodpfxjv D U Hns Abdsg Drive: Hydraulic

Sąlyga: naujas, New unit MASS International Conveyor NI 1 Conveyor/Discharge Belt Angle-adjustable conveyor with feed hopper Available at short notice Example: NI 1 Length: 1500 mm Usable width: 250 mm Gedpeh Nyp Uofx Abdsbg External width: 305 mm (without motor) Height-adjustable discharge height: 600 - 1000 mm Inclination adjustable as required Cleat height: 30 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on lockable swivel castors Options: Custom dimensions available FDA-compliant belt Modified belt speed etc.