Temperatūros aušinimo blokas (TCU)
Single Variotherm ATT H2-200-48

Name: Single Variotherm ATT H2-200-48
Brand: Single
Availability: InStock

Sąlyga

Naujas

Vieta

Hochdorf

Temperatūros aušinimo blokas (TCU) Single Variotherm ATT H2-200-48

Rodyti žemėlapį

Duomenys apie mašiną

Įrenginio aprašas:: Temperatūros aušinimo blokas (TCU)

Gamintojas:: Single

Modelis:: Variotherm ATT H2-200-48

Sąlyga:: naujas

Kaina ir vieta

Vieta:: Ostring 17-19, 73269 Hochdorf, Deutschland

nuoma:: yra įmanoma

Skambinti

Pasiūlymo informacija

Sąrašo ID:: A6050788

Nuorodos Nr.:: ATT H2-200-48

Naujinta paskutinį kartą:: Data 2024.11.21

Aprašymas

*TECHNICAL SPECIFICATIONS:

Heating capacity (hot circuit): 48 kW
Heating capacity (cold circuit): 12 kW
Cooling capacity (hot circuit): 42 kW
Cooling capacity (cold circuit): 270 kW
Medium: Water up to 200°C
Maximum external volume: 10 l at 200°C

Max. flow rate: up to 200 l/min
Max. delivery pressure: up to 6.5 bar
Motor power: 5.5 kW
Dimensions (LxWxH): 1,395 x 753 x 1,180 mm
Weight: approx. 580 kg

*FEATURE HIGHLIGHTS:
- PLC control system with touch screen
- Heating via Incolloy stainless steel tubular heaters
- Heating control via solid-state relays
- IP54 switch cabinet with forced ventilation
- Electrical wiring with terminal blocks
- Volt-free input for cold/warm switching signal (front door)
- Volt-free contact for collective alarm via 3-pole connector (front door)

- Temperature control unit with heating and cooling circuits for connection to a valve station, enabling rapid switching between hot and cold circuits
- Temperature-controlled supply of return water
- Level monitoring with automatic level compensation
- Dirt filters in cooling water inlet and circulation system return
- Separate automatic filling with dirt strainer
- Flow measurement via differential pressure principle in both circuits
- Monitoring of heater surface temperature via temperature sensors
- System pressure regulation, required compressed air supply: 6 to 8 bar
- Pressure booster pump type DS 360 for make-up water supply
- Corrosion-resistant components (stainless steel, brass)
Kodpfxeg Ey Ufj Af Iell
- Unit mounted on castors and ready for connection

*OPTIONS:
- EcoTemp system for intermittent operation
- Connection for external temperature probe PT100 or type J/K
- Remote touch screen with 15 m cable

Visit our website for more details or for other performance classes.

*This unit complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification describes the standard equipment; customer requests deviating from the standard are specified in offers or order confirmations.

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.

Tiekėjas

Registruota nuo: 2020

8 Skelbimai internetu

Skambinti

Pateikti užklausą

Telefonas & Faksas

+49 170 6... skelbimai

Pridėti prie stebėjimo sąrašo

Dalintis Pranešti apie skelbimą

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Automatinės tekinimo staklės TSUGAMI HS 2075AX

Vokietija

1 260 km

Automatinės tekinimo staklės
TSUGAMIHS 2075AX

Skambinti

Sąlyga: naudotas, Gamybos metai: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Kledovivx Nopfx Af Iel Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Number of tool stations: 35 Approx. machine weight: 3.3 t Space requirements (approx.): 2.11 x 1.2 x 1.89 m Used CNC sliding and fixed headstock turning/milling center with B-axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, up to 5-axis simultaneous machining B-axis: freely programmable from 0°–130° Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: main and counter spindle Number of linear slides: 2 Total number of tool stations: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding head and fixed head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear carriage with Y-axis Cross drilling at the rear Chip conveyor Fire extinguishing system FMB Minimag 20 bar feeder, year 2012 Approx. 7,200 operating hours

Peržiūrėti detales

Mažas skelbimas

Cilindrinė šlifavimo mašina KELLENBERGER 600 U

Contamine-sur-Arve

1 588 km

Cilindrinė šlifavimo mašina
KELLENBERGER600 U

Skambinti

Sąlyga: naudotas, TECHNINIAI DUOMENYS - Atstumas tarp centrų: 600 [mm] - Centrinės aukštis: 175 [mm] - Stalo orientacija: 11 [°] UNIVERSALUS ŠLIFAVIMO DISKO LAIKIKLIO VERŽLIARAKTIS - Kairiojo šlifavimo disko matmenys: 400 x 50 x 127 [mm] - Dešiniojo šlifavimo disko matmenys: 225 x 20 x 76,2 [mm] - Variklio galia: 3 [kW] - Veleno greitis: 1500 / 1700 / 2200 - Šlifavimo disko laikiklio veleno orientacija: 270 [°] DETALĖS LAIKIKLIO VERŽLIARAKTIS - Detalės laikiklio veleno orientacija: 360 [°] - Veleno greitis: 20 - 400 [aps./min] - Vidinis kūgis: Morse 5 - Variklio galia: 0,9 [kW] PRIEŠVELENIS Klodpeuhbywsfx Af Iel - Vidinis kūgis: CM4 - Pinolės eiga: 30 [mm] MATMENYS - Užimamas plotas: 2580 x 1680 [mm] - Aukštis: 1670 [mm] - Svoris: 2200 [kg] PRIEDAI - FISCHER vidinis gręžimo velenas: 14.000 [aps./min]

Peržiūrėti detales

Mažas skelbimas

Güglingen

1 220 km

Aušintuvas
HitemaENR 038 R454B

15 690 €

fiksuota kaina neįskaitant PVM

Skambinti

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, The ENR series consists of air-cooled water chillers designed for industrial applications and outdoor installation. The ENR 038 model features axial fans, scroll compressors, condensers with finned aluminium coils, and a self-cleaning coaxial evaporator for maximum operational reliability. It is equipped with an internal pump, tank, fan control, and uses the low-GWP refrigerant R454B. Cooling capacity: 37 kW, low-GWP refrigerant R454B. We carry a large selection of new and used water chillers available immediately from stock. Contact us for a non-binding quote. We offer rental, sales, and nationwide service for all refrigeration systems throughout Germany. Kledpofmd Hhefx Af Iel

Peržiūrėti detales

Mažas skelbimas

Centro tekinimo staklės Weiler Condor B Geometrisch Überholt

Ubstadt-Weiher

1 232 km

Centro tekinimo staklės
WeilerCondor B Geometrisch Überholt

Skambinti

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor B, Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C (NEW) Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: - Machine No. 90-1495 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock Morse taper 3 - Feed rates from 0.015 to 0.46 mm/rev - Possible threads: Metric, Imperial, Module and Diametral Pitch - Metric thread pitches from 0.18 to 28 mm - Weight approx. 1100 kg - Spindle brake engageable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: - 3-axis digital readout by K&C, new, with 12 months manufacturer warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving function, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal, Klodpfx Aevambcof Iel - Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments - 160 mm 3-jaw chuck with two sets of jaws, NEW - Multifix quick change toolpost, size A, with 2 new tool holders - Bed stop - Electric chuck guard, NEW - LED machine lamp, NEW - Rear splash guard - Operating manual - Coolant system - Machine feet About the machine: Offered is a Weiler Condor B lead and feed screw lathe, geometrically overhauled and in as-new condition. The guideways have been reground or newly hand-scraped. Supplied with a certified inspection protocol. A very attractive machine with electronic spindle protection. The accessories — collets, chuck, and Multifix — are new. Spindles, nuts, bearings, belts, and wipers have been renewed. You are welcome to inspect this machine under power at our premises and see its condition for yourself.

Peržiūrėti detales

Mažas skelbimas

Pramoninis robotas KUKA KR200-3 COMP + SPINDLE +TOOL CHANGER SET

Burgas

1 431 km

Pramoninis robotas
KUKAKR200-3 COMP + SPINDLE +TOOL CHANGER SET

Skambinti

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2010, keliamoji galia: 200 kg, rankos pasiekiamumas: 2 400 mm, PLC Merkezi olarak, stoklarımızda bulunan endüstriyel robotlarımız ile bu örnekteki gibi özel mühendislik projeleri gerçekleştirebiliriz. Size aşağıdaki konularda destek olabiliriz: - Kaynak - Kesme - Makine Besleme - Paletleme - Depaletleme - Mermer İşleme - Abkant Makinesi Besleme ve Metal Bükme - Ve daha birçok proje Marka: KUKA Model: KR200-3 Comp Durum: 1 yıl garantili, revize edilmiş Versiyon: V5.6.12 Klodpfx Ajq Dpxdjf Ijl Yıl: 2010 Kontrol Kabini: KRC2 ed 05 Nominal Taşıma Kapasitesi: 200kg Erişim Mesafesi: 2400mm Dahil Olanlar: Manipülatör + Kontrol Kabini + Tüm Kablo Setleri + Teach Pendant + 1 Hertz Spindle Motor (Yeni) + Delta Spindle (Mekanik Sistem ile Takım Halinde) + Takım Değiştirici Tabla Dahil Olmayanlar: 7. Eksen, Mühendislik Tasarımı ve Danışmanlık Nakliye: Fiyata DAHİL DEĞİLDİR Ödeme: Teslimattan önce %100 ödeme

Peržiūrėti detales

Mažas skelbimas

Centro tekinimo staklės WEILER Commodor B - Teilüberholt

Ubstadt-Weiher

1 233 km

Centro tekinimo staklės
WEILERCommodor B - Teilüberholt

26 500 €

Pradinė kaina neįskaitant PVM

Skambinti

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe from year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop. Among other things, the main spindle bearings as well as the lead/feed screw bearings have been completely replaced! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify on site. Availability: on request Machine no.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Possible threads: Metric, Imperial, Module, Diametral-Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, removable chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various clamping jaws... Our service promise to you: - We are a certified master workshop in mechanical engineering Kljdpfx Aothd Shsf Iel - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can carry out a complete or partial overhaul of the selected machine - Upon request, we can repaint the selected machine in your preferred color - Upon request, you can order additional accessories such as tools directly - Upon request, we can also install further accessories, such as safety equipment - We are happy to take care of shipping and/or installation

Peržiūrėti detales

Mažas skelbimas

Įrankių laikiklis VDI 40 Forkardt / divers VDI 40

Mögglingen

1 184 km

Įrankių laikiklis VDI 40
Forkardt / diversVDI 40

Skambinti

Mažas skelbimas

Hitema ENR003, Aušintuvas, Aušintuvas, Aušintuvas, Aušintuvas, Aušintuvas, Aušintuvas Hitema ENR 003

Güglingen

1 220 km

Hitema ENR003, Aušintuvas, Aušintuvas, Aušintuvas, Aušintuvas, Aušintuvas, Aušintuvas
HitemaENR 003

3 150 €

fiksuota kaina neįskaitant PVM

Skambinti

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Newly arrived air-cooled chiller, 3.6 kW according to Eurovent, coaxial evaporator, 40 l tank capacity, integrated P3 pump, scroll compressor. The unit is perfectly suited for small-scale process cooling applications. Compact design, easy control. Klsdpofy Rycjfx Af Iel

Peržiūrėti detales

Mažas skelbimas

Įpurškimo liejimo mašina Engel DUO 17060/2000

Wrocław

649 km

Įpurškimo liejimo mašina
EngelDUO 17060/2000

Skambinti

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 – RC300 Robot TECHNICAL DATA: Injection Unit: Screw diameter: 135 mm Screw stroke: 610 mm Injection volume: 8,731 cm³ Shot weight (PS): 7,860 g Screw rotation speed: 125 rpm Screw torque: 14,000 Nm Max. screw torque (at reduced speed): 15,630 Nm Plasticising capacity (3-zone screw): 222.9 g/s Plasticising capacity (barrier screw): 279.2 g/s Injection performance: 1,904 cm³/s Klodpfx Ajw Aw Tajf Iel Regenerative injection pressure: 1,648 bar Max pressure: 2,000 bar Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN Barrel L/D ratio: 25 Number of heating zones (including nozzle): 8 Heating power: 88.5 kW Clamping Unit: Clamping force: 20,000 kN Minimum clamping force: 2,000 kN Opening force with cushion: 1,600 kN Opening stroke: 3,000 mm Max. platen distance: 3,800 mm Mould height: 800 – 1,800 mm Tie bar spacing (H x V): 2,000 x 1,600 mm Platen size (H x V): 2,700 x 2,430 mm Max. mould weight (moving/fixed): 2 x 41,330 kg Max. total mould weight: 62,000 kg Dry cycle stroke (Euromap 6): 1,400 mm Dry cycle time (Euromap 6): 5.5 s Ejector Unit: Ejector stroke: 400 mm Ejector force: 385 kN Drive and cooling: Installed main motors power: 265 kW Oil tank capacity: 1,600 l Max. oil cooling power (at 25°C): 43.2 kW Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 – RC300 Robot (2022): Z-axis stroke: 4,280 mm X-axis stroke: 1,800 mm Y-axis stroke: 2,600 mm Robot fully integrated with the machine – control via machine panel Machine in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, household appliances, technical parts). Machine is under power, test run possible. AVAILABLE IMMEDIATELY For further information, please contact us – we can provide additional photos, a working video, technical documentation, and arrange a convenient appointment for inspection.

Peržiūrėti detales

Mažas skelbimas

Apdirbimo centras Fehlmann PICOMAX 60-CNC

Rheinfelden

1 398 km

Apdirbimo centras
FehlmannPICOMAX 60-CNC

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, veikimo valandos: 6 000 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 505 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 610 mm, X ašies padavimo greitis: 20 000 m/min, Y ašies padavimo greitis: 20 000 m/min, padavimo greitis Z ašis: 20 000 m/min, valdiklių gamintojas: Heidenhain, valdiklio modelis: TNC 426, ruošinio svoris (maks.): 300 kg, stalo plotis: 380 mm, stalo aukštis: 1 004 mm, stalo ilgis: 920 mm, bendras svoris: 250 kg, veleno greitis (min.): 50 aps./min, veleno greitis (maks.): 18 000 aps./min, ašies variklio galia: 10 W, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, The machine is equipped as follows: - Tool holder: SK 30 - Tool changer with 24 positions (automatic tool change) - Coolant system - Spindle cooling - Mist extraction unit Kjdpfjv A Tyqox Af Ijll - Chip drawer - RENiSHAW probe

Peržiūrėti detales

Reklamuokite čia