Automatinė aliuminio pjovimo staklės Pressta Eisele Profilma 500

Pressta Eisele Profilma 500

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Overhauled: 2024 Year of manufacture: 1994–2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed: 0 – 40 mm/s, continuously adjustable Cut length: 5–950 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After the retrofit, the machine is in a like-new condition, both technically and visually. Thanks to its equipment and construction, the machine can be used very efficiently for a wide range of applications. The programmed HMI control ensures simple and highly profitable operation of the system. The soundproof cabin minimizes noise emissions. The machine is fully overhauled in-house according to customer requirements. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul and/or replacement of all pneumatic cylinders - Renewal of valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine is equipped with: - Soundproof cabin Psdouiy Hrspfx Ahcerb - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feed of up to 6 m long bar stock - Roller conveyors for bar stock - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your personnel

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, steplessly adjustable Saw blade height adjustment: electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. Among other things, the following components have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to servo-controlled pusher - New electrical components - New pneumatic lines - New pneumatic components - Retrofit to valve manifold - Optimized extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishing of the enclosure In addition, the machine features: - Minimum quantity lubrication - Splitter extension (for high-quality cut surfaces without drag marks) - Loading magazine for gentle handling of painted/anodized surfaces - Scrap piece ejection in the pusher - Foldable scrap piece tray Options: - Magazine width: 3,000 mm Predpfx Aouiy Ngehcjb - Pusher length: 6,000 mm - Pusher length: 8,000 mm - Reinforced motor: 5.5 kW - Multiple clamping device for parallel sawing of several workpieces - Online support connection - Delivery and installation at your site - Training for your staff

Būklė: naudotas, Thread rolling machine, cold rolling machine, thread roll machine, profile rolling machine Manufacturer: PEE-WEE Model: UPW 24 Serial no.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool mounting length/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor output: 3 kW Roll drive motor output: approx. 5.5 kW Mains connection: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed in 4 steps via gear shifting - Hydraulic unit integrated in machine bed Prsdpfeuz If Njx Ahceb - Operating manual with electrical schematic diagram Required space (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools have three sections – the lead-in, the calibration section, and the lead-out. Groove rolls have no pitch and are swiveled to match the lead angle of the profile to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and swivel angle results in the lead angle in the workpiece.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 30 000 mm, bendras aukštis: 4 300 mm, bendras plotis: 6 500 mm, ruošinio svoris (maks.): 100 kg, temperatūra: 220 °C, šildymo galia: 80 kW (108,77 AG), ruošinio aukštis (maks.): 1 200 mm, ruošinio ilgis (maks.): 2 500 mm, izoliacinė medžiaga: Mineralwolle 75 kg/m³, izoliacijos storis: 150 mm, ruošinio plotis (maks.): 800 mm, Įranga: apšvietimas, Pilnai automatinė, nuolatinio ciklo miltelinio dažymo linija (ciklinis konvejeris, paviršiaus apdorojimas, „Wagner“ dažymo įranga, krosnys) Parduodama profesionali, pilnai automatinė miltelinio dažymo linija, skirta nuolatiniam darbui (ciklinis procesas), kurią parduoda prekybos agentūra „Klaus Benecke“. Ši linija idealiai tinka efektyviam aliuminio detalių ir kitų metalinių gaminių dažymui. Individuali linijos konfigūracija galima pagal užsakymą! Pagrindiniai privalumai ir komponentai: - Cheminis paviršiaus apdorojimas: dviejų etapų purškimo kamera (ilgis 3600 mm, plotis 1500 mm, aukštis 2250 mm), įskaitant riebalų šalinimą / fosfatavimą ir skalavimo zoną su purškimo žiedu. - Išankstinio džiovinimo krosnis: nuolatinio ciklo krosnis, iki 120 °C, su 40 kW LPG dujų degikliu („Riello“). (galima naudoti kitą energijos šaltinį) - Miltelinio dažymo kabina PVC 3.600: antistatinė plastikinė kabina su monociklonu (12 000 m³/h oro įsiurbimo galia) ir antriniu filtru. - „Wagner“ aukštos kokybės dažymo įranga: 2 pakeliami įrenginiai, 6 automatiniai dažymo pistoletai PEA-C4, 2 rankiniai pistoletai ir valdymo sistema, skirta iki 10 pistoletų. - Kietinimo krosnis: nuolatinio ciklo krosnis, iki 220 °C, su 80 kW LPG dujų degikliu („Riello“). (galima naudoti kitą energijos šaltinį) - Konvejerinė sistema: „Cardin“ grandininis konvejeris C-100, skirtas darbui ciklu (50 m konvejerio ilgis, 54 m grandinė). - Valdymo sistema: moderni PLC valdymo sistema su 7 colių spalvotu ekranu („Easy View“), keitikliu ir modemu nuotolinei priežiūrai. Prsdpfsum Ufljx Ahcob Techniniai duomenys: - Linijos tipas: miltelinio dažymo linija (nuolatinis / ciklinis procesas) - Maksimalūs gaminio matmenys: (ilgis x plotis x aukštis) 2500 x 800 x 1200 [mm] - Maksimali apkrova vienam gaminiui: 100 kg / skersinis - Apytikslis našumas: apie 50 m²/val. (abiejose pusėse) - Medžiaga: aliuminis / metalinės detalės - Konvejerio juosta: „Cardin“ grandininis konvejeris C-100 (50 m) - Degiklio galia: džiovinimo / kietinimo krosnis 40 kW / 80 kW (LPG dujos arba kitas energijos šaltinis pagal užsakymą) - Valdymo sistema: PLC su 7 colių jutikliniu ekranu. Būklė: Nauja / projektas. Komponentai, įtraukti į pristatymo apimtį: - Cheminis paviršiaus apdorojimas (dviejų etapų purškimo kamera) - Išankstinio džiovinimo krosnis - Miltelinio dažymo sistema (PCB 3.600) - „Wagner“ dažymo įranga - Miltelinių dažų kietinimo krosnis - Konvejerinė sistema - Elektrinė valdymo sistema - Paslaugos ir priedai

Būklė: labai geros būklės (naudotas), Kampų jungimo staklės Pressta Esiele PV10 P Prsdpfx Ajl Skl Iehcsb pristatymas ES ~350 eurų

Būklė: naujas, Saw blade diameter 350 x Ø 30/40 mm Cutting diameter 135 mm Cutting length 430 mm Saw blade dimensions 350x3.0/2.4x40 mm Speed 3800 rpm Extraction nozzle diameter 100 mm Total power requirement 3.0 kW Machine weight approx. 100 kg Space requirement approx. 1300 x 800 x 1600 mm - Crosscut and mitre circular saws for crosscutting operations - Double-sided mitre adjustment (60° / 45°), with fixed stop - Single-sided bevel cut up to 45°, with fixed stop - Sturdy cast iron construction - Precision ball bushing guide of the tool carriage on hardened and ground steel shafts - Manual saw feed - Saw blade infinitely height-adjustable - Port for optional extraction Prodpfx Ajxabqzehcsb Cutting data: - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x Carbide-tipped circular saw blade 350 x 3.0/2.4 x 40 mm * Z = 108 FTZ negative for aluminium and plastics - Hydraulic feed brake, steplessly adjustable - Pneumatic material clamping from above, consisting of: * 2 vertical clamping cylinders, adjustable with hand lever valve - 1x Machine stand - More powerful drive motor (3.0 kW)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 337 mm, tekėjimo skersmuo: 420 mm, Bendra informacija Valdymas: Siemens 828 D Sukimosi skersmuo: 420 mm Sukimosi ilgis: 1.337 mm Sūpavimo skersmuo: 700 mm Strypo praėjimas: 89 mm Greitaeigis poslinkis: 20 / 10 / 24 m/min Pagrindinis velenas Strypo praėjimas: 89 mm Patrankos dydis: 305 mm Sukimosi greitis: 2.500 aps./min Variklio galia: 22 kW Veleno sukimo momentas: 1050 Nm Priešpriešinis velenas Sukimosi greitis: 4.000 aps./min Variklio galia: 12 kW Veleno sukimo momentas: 122 Nm Įrankių revolveris Technologija: 12 stočių Įrankio pavara: 5.000 aps./min Pedox Ag Hmopfx Ahcsrb Galia: 9,4 kW Sukimo momentas: 90 Nm Įrankio tvirtinimas: BMT-65 / BH X ašies eiga: 280 mm Y ašies eiga: 120 mm Z ašies eiga: 1.390 mm Įranga Drožlių šalinimas: drožlių transporteriu Aušinimo skysčio talpa: 240 litrų Įrankių matavimas: matavimo svirtis darbiniame lauke Detalių pašalinimas: detalių gaudyklė Strypų magasinas: paruoštas

Gamybos metai: 2006, būklė: naujas, I am selling 12 sets of new saw blades suitable for HOLZMA panel saw machines. Podpfjg Dvutex Ahcerb Main saw blade: FABA 600 x 5.8 / 4.0 x 60 Z 72 Scoring saw blade: AKE 26 200 45H 200 x 4.8 - 5.8 x 45 Z=36 Total price: 1,000 euros. Available immediately.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit Suitable for many applications, especially in the photovoltaic and automotive industries. Loading unit: Horizontal loading magazine, model HLM 4-strand toothed belt conveyor 6 compartments, 285 mm wide, for accommodating profiles; maximum material height in line with saw cutting range; round material max. diameter 130 mm 3 glide strips between toothed belts as additional support, profile length min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA Saw blade diameter max. 500 mm Prsdpfxoxvbvvo Ahcjb Continuously variable speed control Hydro-pneumatic saw blade feed, continuously adjustable, from rear to front Siemens S7-300 control system with touchscreen Reversing device with 5-fold stroke up to max. 5,000 mm Electric material feed 3 - 1,000 mm (single stroke) Cutting width extension on both sides Pneumatic removal slide Waste flap after the saw for cutting remnants / offcuts Section length, profile-dependent from 8 mm Menzel minimum-quantity lubrication Clamping pressure regulation 2 extraction nozzles for dust extraction Unloading: Table surface 1,500 mm x 2,500 mm Pneumatic cross transfer slide

Būklė: labai geros būklės (naudotas), Kopijavimo frezavimo staklės Elumatec tipas KF 78/60 siuntimas ES - 350 eurų Psdpfx Ahevi R Avjcsrb