Automatinė Aliuminio Pjovimo Staklės Pressta Eisele Profilma 500 pirkti naudotą (60 385)

Gamybos metai: 2004, būklė: naudotas, Maks. pjūklo disko skersmuo: 500 mm Pjovimo sritis iki 80x200 mm Paviršiaus padavimo ilgis: maks. 800 mm su skaitmeniniu rodmeniu Pjūklo disko greitis: 2 aps./min. Detalės skaitiklis su automatiniu išjungimu pasiekus nustatytą kiekį Gjdpfxsxn Iq Dj Ap Ieuc Be laipsnių reguliuojamas pneumatinis medžiagos padavimas Hidropneumatinis pjūklo padavimas Pneumatiniai medžiagos spaustuvai Purškimo įrenginys Įeina naudojimo instrukcija Staklių matmenys: 2100 x 1100 x 1500 mm (P x G x A) 1000 kg

Gamybos metai: 1998, būklė: naudotas, Long-cut saw for cutting aluminum profiles with feed pusher, in very good condition. Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Gusdowx I Hvjpfx Ap Isc Maximum feed length of the material pusher: 6,200 mm The machine is currently dismantled and in storage with us. Further technical data available on request.

Gamybos metai: 2009, būklė: naudotas, Sawing system for aluminum featuring 2 saw motors, each capable of performing independent 45° cuts. Material feed unit with up to 8,100 mm capacity Cross conveyor, outfeed table, chip conveyor, and extraction system included Soundproof enclosure Gujdpfx Aeqzmnuop Isc Control via Siemens S7 panel Operating manual and documentation available; further technical details upon request The machine was operational until dismantling Additional technical specifications available upon request or see photos

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, visiškai automatinis valdymas Pavaros galia 7,5 kW, S6, 400 V, 50 Hz, 2850 aps./min. Skirta naudoti pjūklams iki 550 mm skersmens Godpfeyvtyvex Ap Iouc Pjovimo diapazonas 270x140 mm (plotis x aukštis), iki 185 mm skersmens Maksimalus profilio plotis 270 mm Valdymo pultas su ekranu Įskaitant ruošinių skaitiklį Įskaitant reversavimo įrenginį iki maksimalios ruošinio ilgio 3000 mm Automatinis išjungimas su galinio jungiklio pagalba, kai baigiasi medžiaga Hidropneumatinis pjūklo stūmimas, nenutrūkstamai reguliuojamas, iš apačios į viršų Vertikalaus ir horizontalaus prispaudimo įrenginiai, tiekimo ir išleidimo pusėje prie pjūklo galvos Pneumatinė dozavimo ir purškimo sistema Pjovimo tarpo praplatinimas abiejose pjūklo pusėse Elektroninis medžiagos padavimo įrenginys 3-600 mm padavimo ilgiui, su rutuliniu sraigtu ir servovarikliu, Įskaitant pneumatinį horizontalų ir vertikalų prispaudimą, Minimalus likučio gabalas nuo 75 mm, priklauso nuo profilio 2 ištraukimo jungtys po 100 mm Apsauginis dangtis virš pjūklo galvos ir padavimo įrenginio Tinkama ištraukimo sistema gali būti pasiūlyta papildomai!

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Peilio pasvirimas: -45° / +45°. Maksimalus spaustuvo atidarymas: 180 mm Nebegalima tiekti ilgis: 385 mm Gusdpsx Hw Sqofx Ap Iec Disko dydis: 350 mm Peilio sukimosi greitis: 1700 / 3400 aps./min. - 2 greičiai

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit Suitable for many applications, especially in the photovoltaic and automotive industries. Loading unit: Horizontal loading magazine, model HLM 4-strand toothed belt conveyor 6 compartments, 285 mm wide, for accommodating profiles; maximum material height in line with saw cutting range; round material max. diameter 130 mm Guedexvbvvepfx Ap Iec 3 glide strips between toothed belts as additional support, profile length min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA Saw blade diameter max. 500 mm Continuously variable speed control Hydro-pneumatic saw blade feed, continuously adjustable, from rear to front Siemens S7-300 control system with touchscreen Reversing device with 5-fold stroke up to max. 5,000 mm Electric material feed 3 - 1,000 mm (single stroke) Cutting width extension on both sides Pneumatic removal slide Waste flap after the saw for cutting remnants / offcuts Section length, profile-dependent from 8 mm Menzel minimum-quantity lubrication Clamping pressure regulation 2 extraction nozzles for dust extraction Unloading: Table surface 1,500 mm x 2,500 mm Pneumatic cross transfer slide

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, High-Performance Automatic Saw / Manufacturer: PRESSTA-EISELE Model: Profilma 510 / Year of manufacture: 09/2008 Description: * High-performance automatic saw with fully automatic operation * Very high cutting precision * Short cycle times * Burr-free cutting * High reliability * Low maintenance Suitable for aluminum and plastic, ideal for cutting large quantities of small parts. Length tolerance: 0.1 mm. The saw can be viewed and tested under power by appointment. Previous use: Used for cutting corner connectors. Very well-maintained, used machine in ready-to-operate condition. Technical specifications: - Saw motor: 7.5 kW, S6 Gusdpew D T Uiefx Ap Ijc - Speed: 2,000 - 3,500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1,000 mm / up to 5x reversal possible - Cut-off length: from 8 mm, depending on profile - Remnant length: from 90 mm, depending on cut-off length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1,750 kg - Dimensions (LxWxH): 2,700 x 1,400 x 2,300 mm Equipment: - Control via Siemens S7 panel - Fully automatic bar feeder - Roller conveyors - Extraction system - Chip bunker - Various accessories - CE marking No guarantee for the completeness or accuracy of technical data or equipment. Subject to prior sale.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, veikimo valandos: 499 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1587 / 1588, pjūklo disko skersmuo: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw Unit: Equipped with a saw blade diameter of 500 mm. The drive is provided by a 7.5 kW motor (400 V) with infinitely variable speed control. Gjdpfxsyyz Txe Ap Ieuc Punching Unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. The punching direction is vertical from above, and punch tool cassettes can be used for up to 8 profiles simultaneously. Material Feed: The feed is controlled via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per single stroke. Controls: Modern variants frequently use a Siemens S7 controller with touch display for intuitive operation and precise programming. This machine is built for continuous industrial use and has the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on configuration) Dimensions (saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH) Hydraulic unit: approx. 900 x 600 x 800 mm 2 machines in stock. ----- Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailored financing solutions to suit your needs. Whether down payment, installment plan, or customized financing models – together we will find the right solution. On request, we also handle the entire transportation logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don’t have to worry about a thing. 📞 Feel free to contact us for further information or a non-binding offer. We offer you personal and expert advice. Subject to prior sale, modifications and errors excepted!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, veikimo valandos: 450 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1589 / 1590, pjūklo disko skersmuo: 500 mm, Fully Automatic Saw-Punching Machine for Aluminium and Plastic Profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated process. Based on the proven Profilma 502 model, this machine is ideally suited for high production volumes, complex machining operations, and processing of material bundles. Control is managed via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing Area & Feed: • 500–550 mm saw blades • Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm • Continuously variable speed control • Saw cut from below, powered feed • Material feed: 3–800 mm, reversible up to 4,000 mm • Ball screw spindle with servo drive and round shaft guide • Remnant piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching Unit: • Vertical hydraulic punching unit (discharge side) with automatic oil cooling • Punching force: 300 kN • Stroke: 20 mm • Double-stroke cycle time: 2–3 seconds • Punch scrap ejection into the frame • Conveyor belt 250 × 800 mm for parts removal Equipment: • 2 pneumatic clamping cylinders (vertical, pressure-reduced) • 3 chip extraction ports Ø 100 mm, volt-free contact for extraction control • Minimum quantity lubrication unit with 2 × 3-litre tanks and fill level indicator • Noise reduction package: hood and saw blade guard internally insulated • Roller track (740 mm) with finger guard on infeed side • Robust stationary frame, working height: 960 mm • Manually opening safety hood • Saw blade housing under the table plate Max. Cutting Area: • Profile height: up to 65 mm • Profile width: up to 170 mm Technical Data: • Dimensions (W × D × H): approx. 311 × 153 × 197 cm • 2 machines available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also tailor-made financing options that meet your needs. Whether down payment, installment plan, or customized financing models – together, we will find the right solution for you. On request, we also take care of all transport arrangements. From planning to reliable delivery, we ensure a smooth and timely process so you have nothing to worry about. 📞 Contact us for further information or a non-binding offer. We provide personal and competent advice. Gsdpsyyz Ebofx Ap Ijuc Subject to prior sale, changes, and errors!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, veikimo valandos: 67 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1591 / 1592, pjūklo disko skersmuo: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminium and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. It is based on the Profilma 502 model and is specifically optimised for high-volume applications and combined processing tasks – including the handling of entire profile bundles. The control system utilises a Siemens S7 with touch display, piece counter, cycle time indicator, and integrated error diagnostics. A IXON router ensures secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw with servo drive and round shaft guidance - Remnant piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Gsdpfx Aoyyzxhsp Isuc Punching Unit: - Vertical and horizontal hydraulic punching (discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2 × 2–3 seconds - Punching scrap is extracted sideways from the machine frame - Conveyor belt 250 × 800 mm for parts removal Features: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, floating contact for extraction control - Minimum quantity spray unit with 2× 3-litre tanks and fill level indicator - Noise protection package: sound-insulated hood and saw blade guard - Roller conveyor (740 mm) with safety guard at infeed - Rigid stationary frame, working height: 960 mm - Manually opening safety cover - Saw blade housing located beneath the worktop Max. Cutting Capacity: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total 2 units available ----- Attractive Offer – Flexible & Worry-Free We offer not only a high-quality product, but also tailored financing solutions to suit your needs. Whether down payment, instalments or custom financing models – together we'll find the perfect solution. On request, we are also happy to manage the entire transport logistics for you. From planning to reliable delivery, we ensure a smooth and punctual process, so you don’t have to worry about a thing. ☎️ Contact us for further information or a non-binding quote. Our team is ready to provide you with expert, personalised advice. Subject to prior sale, modifications, and errors!

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, veikimo valandos: 1 809 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1559, pjūklo disko skersmuo: 550 mm, padavimo ilgis X ašis: 800 mm, bendras ilgis: 2 400 mm, bendras plotis: 2 000 mm, bendras aukštis: 1 800 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 190 mm, įvesties srovės tipas: trifazis, sukimosi greitis (maks.): 2 850 aps./min, pjovimo aukštis (maks.): 150 mm, bendras svoris: 1 650 kg, skyriaus ilgis (min.): 3 mm, dalies ilgis (maks.): 4 000 mm, pjūklo disko greitis: 2 850 aps./min, įėjimo įtampa: 400 V, pjūklo pavara: 7 500 W, pjovimo skersmuo: 270 mm, pjūklų disko skylė: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction Unit MG 3 ST Fully Automatic Circular Saw PROFILMA 502 Fully automatic operation, drive 7.5 kW, S6, 400 V, 50 Hz, 2850 rpm. Designed for saw blades Ø 550 mm, cutting range 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm, Siemens S7 control with touch display including piece counter. Including CPU 315 and a Flexisoft, piece quantity multiplier for the processing of material bundles. Cycle time indication in seconds, chain dimension, including reversing device for cut lengths up to max. 4 m. Automatic shut-off via limit switch when workpiece ends, error diagnostics, including IXON router for VPN connectivity, see data sheet. Motorized saw blade feed, infinitely variable, vertical and horizontal clamping devices from bottom to top, infeed and outfeed sides at the saw head, saw kerf extension on both sides of the saw blade, electronic material feed unit with 800 mm feed length, equipped with ball screw spindle and servo motor, including pneumatic horizontal and vertical clamping devices. The profile support area in the feed zone is equipped with a lift/lower roller, minimum remnant from 75 mm (depending on profile), clamping pressure reduction horizontal and vertical with 6 pressure regulators, cycle spray device with fill level monitoring and automatic shut-off, 1-liter lubricant tank, noise protection package, machine frame internally lined with sound absorbing mats. 2 extraction nozzles Ø 100 mm, safety covers above the saw head and feed unit, 740 mm roller conveyor with protective cover on infeed side, 450 mm Pertinax table top with protective cover on outfeed side. Chip Extraction Unit MG 3 Dust and chips are collected in a 172-liter metal container, which can be unlocked for easy emptying. 2 outlets with hose adapters 100 mm, without extraction hose, drive 3.0 kW, 400 V, 50 Hz, three-phase motor. Max. air volume flow 2,600 m³/h, vacuum 30 mbar, with fan snail housing above extractor. Large filter area, pneumatic shaking unit for filter cleaning, filter class M, noise level max. 80 dB(A). Gusdpfx Aey Dtpmsp Ioc Selector switch for continuous operation or saw-controlled operation, no power cable, paint finish: RAL 7035 / 9016.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1015, profile with dimensions (HxW) up to 100x195 mm, 80x200 mm automatic work cycle driven by a 3 kW / 400 V motor, 2850 rpm cutting disc d=450x3.8x40 mm, z=110 Gedpfxowgmv Se Ap Isuc horizontal and vertical material clamping on the infeed side spray dosing system horizontal material clamping in the feed device both clamping jaws retract during withdrawal (prevents profile scratching) steplessly adjustable hydropneumatic feed of the cutting disc cutting disc entering from the rear cut section length adjustable within 0–300 mm (with reversing device 0–600 mm) length setting via hand wheel with mechanical counter maximum cut profile width 200 mm cutting range (height x width): 100x195 mm, 80x200 mm automatic shutdown when material is depleted option to connect to a dust extraction system

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2018, pjūklo disko skersmuo: 550 500 mm, The machine is in perfect technical condition and has seen very little use. Designed for processing aluminium and PVC profiles. Mitre cuts are possible in 3 planes, and it can be used as a notching saw; manual adjustment of the horizontal saw blade by up to 20 mm in front of the vertical blade is possible. Cutting options: rectangular, single-sided mitre, double-sided mitre, and three-sided mitre cuts. Suitable for processing profiles up to 300 mm, with width at 90° up to 90 mm, and mitre angles up to 30°. Horizontal notching depth up to 185 mm, vertical up to 210 mm at 90°. Cutting width at 90°: 300 mm, profile height: 280 mm. Manual adjustment of cut and height, positioning via mechanical digital displays. Vertical blade swing range: 30°–90°–30° (front/centre/rear), adjusted manually and positioned using a digital display. Vertical blade swing range also 30°–90°–30°, manual, with positioning via digital display. Material stop (table top) can be manually rotated left and right within 30°–90°–30° and positioned using a measurement scale. Material depth stop is manually adjustable via sliding carriage and hand clamp, positioning via digital display. Gjdpsvtarnsfx Ap Ijuc

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2013, 2013 m. pagamintas diskinis metalo pjūklas. Šio PRESSTA EISELE Profilma 400 V pjūklo pjūklo skersmuo Ø400 mm, galingas maždaug 12 kW variklis. Jame yra automatinis medžiagos padavimas ir pneumatinė prispaudimo sistema, užtikrinanti efektyvų darbą. Jei norite gauti aukštos kokybės pjovimo galimybes, apsvarstykite mūsų parduodamas PRESSTA EISELE Profilma 400 V stakles. Susisiekite su mumis dėl išsamesnės informacijos apie šias stakles. • Dizainas: Integruotas medžiagos padavimo/įkrovimo žurnalas; plaukiojantis padavimas, kompensuojantis profilio nuokrypius • Maitinimas: 400 V / 50 Hz • Medžiagos: Aliuminio ir spalvotųjų metalų profiliai • Pjūklo skersmuo: Ø400 mm • Pjūklo greitis: reguliuojamas maždaug 3500-5800 aps/min. • Pjūklo judesio pavara: Servo variklis su rutulinio sraigto pavara • Pjovimo kryptis: Pjovimo kryptis: linijinis judėjimas iš viršaus į apačią Gsdeyyxxfspfx Ap Ieuc • Pjovimo principas: Kryžminis pjovimas • Medžiagos padavimas: Automatinis servo padavimas su pakartotiniais judesiais, kad būtų galima pjauti ilgesnį pjovimo ilgį • Medžiagos atskyrimas: Pjūklo atskyrimas: prieš įlenkiant pjūklo diską (be pakartotinio pjovimo) • Prispaudimo sistema: Pneumatinis, vertikalus ir horizontalus, iš abiejų pjūklo ašmenų pusių; atskirai reguliuojama prispaudimo jėga; keičiamos plastikinės / PVC pagalvėlės • Valdymas: Valdymas: PLC; valdymas per valdymo skydelį su ekranu • Funkcijos: Profilių duomenų bazė; detalių skaitiklis (įskaitant paketų pjovimą); ciklo laiko rodymas; diagnostika ir klaidų pranešimai; mašinos būsenos indikatorius • Pjūklo diskų tepimas: Minimalus tepimo kiekis (purškiama migla), programuojamas tepimo valdymas • Ištraukimo jungtys: Ø100 mm ir Ø160 mm • Išankstinis montavimas: Paruošta išoriniam drožlių ištraukimui • Variklio galia: iki 22 kW (kelių greičių variklis: 3,5 / 11,5 / 18,5 / 22 kW) Papildoma įranga • Išorinis drožlių ištraukimo įrenginys (prijungti prie Ø100/Ø160 mm prievadų)

Gamybos metai: 1996, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 9182, Offer 23168 Technical specifications: - Notching options + mitre cuts on 3 levels - Perpendicular, single-sided, double-sided, and triple-sided bevels - Can be used as a shifting cross-cut saw - Pneumatic profile clamping; machining with semi-automatic saw units - Saw blade dimensions – vertical: 500 x 3.5 x 40 mm, positive – horizontal: 500 x 3.5 x 40 mm, negative - Notch width / notch height at 90°: 300 / 285 mm - Vertical saw blade: 60° - 90° - 25°, motorized positioning with digital display - Horizontal saw blade swing range with vertical saw blade: 45° - 90° - 45°, motorized positioning with digital displays Gjdpfx Aomb U E Ajp Ijuc - Notch height adjustment with digital displays - Profile stop shoulder manually swivels 30° - 90° - 45° - Pneumatic coolant spray system - Air connection: 6 bar - Drive: 400 V / 2 x 3 kW - Space requirement (approx.): W 2400 x H 2000 x D 1400 mm - Weight (approx.): 1200 kg

Gamybos metai: 1999, būklė: naudotas, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Pivoting material stop with indexing points and digital readout Notch height adjustable via motor with digital display Gsdpfxsvmz R Sj Ap Iouc Motorized angle adjustment with digital display Hydropneumatic material feed with two-hand operation Pneumatic material clamps Coolant lubrication

Gamybos metai: 1997, būklė: naudotas, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Pivoting material stop with indexing points and digital readout Notch height adjustable via motor with digital display Motorized angle adjustment with digital display Hydropneumatic material feed with two-hand operation Guodox Ecg Uepfx Ap Ioc Pneumatic material clamps Coolant lubrication

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, ATTENTION!!! PROMOTION!!! LAST PIECE AVAILABLE!! Features: Semi-automatic operation cycle Hydraulic control of the saw arm movement (up - down), with continuously adjustable descent speed Arm position memory function Hydraulically operated vise jaws Hydraulic bundle cutting pressure Hydraulic blade tensioning Blade cleaning brush Cooling system Bimetal bandsaw blade CE conformity declaration Technical specifications: Type: Column-type Semi-Automatic Control: Control panel at the front of the machine Maximum cutting diameter: Ø350, 400 x 350 mm Arm lifting: Hydraulic Arm lowering: Hydraulic Blade speed: 25/60/75 m/min Vise: Hydraulic Min. cutting diameter: 5 mm Min. material length in vise: 30 mm Distance from vise base to floor: 780 mm Gusdpfx Ajy Tipnop Isc Blade dimension: 4515 × 34 × 1.1 mm Total power: 5.2 kW Blade speed: 25/60/75 m/min Dimensions (L×W×H): 2400 × 1250 × 1550 mm Weight: 1200 kg Manufacturer: Cormak

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, galia: 5,5 kW (7,48 AG), pjovimo plotis (maks.): 410 mm, valdymo tipas: CNC valdymas, 1 naudotas automatinis juostinis pjūklas Gamintojas: Berg & Schmid Modelis: X Tech 410 Techniniai duomenys: Pjovimo sritis: apvalus 410 mm arba plokščias 410 x 410 mm - Moderni dviejų ašių CNC valdymo sistema - Juostos eigos stebėjimas su automatiniu padavimo reguliavimu - Automatinis pirmo pjūvio paleidimas, minimalus likutis 15 mm - Bežingsnis, dažnio reguliuojamas pjūklo pavaros variklis - Spaudimo reguliavimas plonasienių vamzdžių ir profilių apdirbimui Godpfx Apeytvqqs Ijuc - Hidraulinė drožlių transporterio pavara - Automatinis dvipusis pjūklo juostos pakėlimo mechanizmas - Hidraulinė pjūklo juostos įtempimo sistema - Medžiagos padavimas per precizinį rutulinį varžtą ir linijinį kreipiklį Variklio galia: 5,5 kW Darbinis aukštis: 730 mm Dažymas: plieno pilka (RAL 7036) ir turkio (RAL 5018)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, bendras svoris: 2 200 kg, aušinimo siurblio galia: 180 W, juostinio pjūklo ilgas: 4 570 mm, pjūklo juostos plotis: 41 mm, AMADA HFA 400 – Automatic Band Saw for Metal Series Production | AMADA Quality | Industrial The AMADA HFA 400 is an automatic horizontal bandsaw for metalworking, designed for precise and repeatable cuts in series production. The machine impresses with its compact design, high rigidity, and proven AMADA machine tool technology. Gsdpfx Apeyc H Ews Iouc With a machine weight of 2,200 kg and automatic sawing cycles, the HFA 400 is ideal for manufacturing companies, service centers, and toolmaking operations. ● Automatic bandsaw for metal ● Genuine AMADA brand quality ● Robust construction – 2,200 kg ● Saw motor 5.5 kW ● Industrial-grade hydraulics ● Automatic sawing operations ● High precision and repeatability ● Suitable for solid stock and profiles ● Durable and reliable construction Technical Data ● Model: AMADA HFA 400 ● Type: automatic bandsaw ● Saw motor power: 5.5 kW ● Hydraulic motor: 1.5 kW ● Coolant pump: 0.18 kW ● Saw blade dimensions: - Length: 4,570 mm - Width: 41 mm - Thickness: 1.3 mm ● Power connection: three-phase ● Connected load: 11 kVA ● Machine weight: approx. 2,200 kg ● Year of manufacture: 2012 Condition: used, fully functional, ready for immediate use 📩 Contact us for price and further information.

Būklė: naujas, MACC 320 MS Semi-Automatic Bandsaw Condition: New "CE" Technical data sheet attached. Available for immediate delivery while stock lasts The core features of the machine (blade support rigidity, flywheel sizing, band guiding and tensioning system) have been meticulously engineered to prevent band fatigue, extend service life, and improve cutting accuracy and speed. Vertical rotation on an adjustable, backlash-free tapered roller bearing pivot. Band drive via two-speed motor and special gearbox with bronze gear and hardened, ground worm screw. Flywheels optimally dimensioned. Robust band guides featuring sealed roller bearings and adjustable carbide guide plates. Band tensioning achieved by an electromechanical device equipped with blade rotation micro switch control. Safety device against accidents fitted on the flywheel cover, control handle, and blade. Cutting thickness: 1.2 mm Cutting range: 0° to 60° right Guedpfx Aefibfajp Ioc Adjustable stop for repetitive cuts of the same length. 0.06 kW electric pump for band cooling Operation: Start the cutting cycle by pressing the start button, the machine: 1. Closes the vice and activates the band motor 2. Lowers the arm for cutting 3. Returns the arm to the starting position 4. Stops the band motor 5. Opens the vice Manual cutting option available OPTIONAL ACCESSORIES: - SINGLE-PHASE motor 69 m/min - Speed variator from 20 to 90 m/min

Būklė: geras (naudotas), Gamybos metai: 2018, mašinos/transporto priemonės numeris: 431-92, Pasiūlymas 26142 Techniniai duomenys: - Pjovimo sritis prie 90° apvalus: 350 mm - Pjovimo sritis prie 90° plokščias: 320 x 460 mm - Kampo reguliavimas: nuo 90° iki 30° - Pjovimo sritis prie 45° apvalus: 280 mm - Pjovimo sritis prie 45° plokščias: 350 x 280 mm - Pjovimo sritis prie 30° apvalus: 180 mm - Automatinis medžiagos padavimas - Medžiagos atramos aukštis: apytiksliai 740 mm Gusdpfx Apszc Izaj Isc - Juostinio pjūklo matmenys: 4350 x 34 x 1,1 mm - Pjovimo greitis reguliuojamas: 25 – 90 m/min - Hidraulinis pjūklo rėmo pakėlimas ir nuleidimas - Pjovimo slėgis reguliuojamas be pakopų - Medžiagos spaustuvas - 3 vnt. ritininiai keliai, 1400 mm - 1 vnt. ritininis stovas - Bendra variklio galia: 400 V / 4,8 kW - Užimama vieta apytiksliai: P 1400 x A 1400 x I 2200 mm - Svoris apytiksliai: 1900 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 26 407 h, Funkcionalumas: visiškai funkcionalus, Siūlome įsigyti visiškai automatinę diskinę pjūklą BLM Group ADIGE EM80, tinkamą tiksliam vamzdžių ir profilių pjovimui serijinėje gamyboje. Įrenginys aprūpintas Siemens Sinumerik CNC valdymu ir automatine medžiagos padavimo sistema, kas leidžia efektyvią ir pakartojamą gamybą. Techniniai duomenys: Pagaminimo metai: 2015 Valdymas: Siemens Sinumerik Galia: 38 kW Įtampa: 380 V / 50 Hz Svoris: apie 8 500 kg Guodpsy Uduzofx Ap Ioc Darbo valandos: apie 26 400 h Pjovimo diapazonas: vamzdžiai Ø 10–80 mm Maks. ruošinio ilgis: 600 mm Idealiai tinka trumpų detalių serijinei gamybai Komplektacija: Automatinė padavimo sistema Pilnas įrenginio apsaugojimas Kelios įrankių pozicijos Spaudimo žnyplių komplektas (žr. nuotrauką) Aukšto našumo greitaeigis pjūklas, skirtas serijinei gamybai, užtikrinantis didelį produktyvumą ir pjovimo tikslumą. Išbandymo galimybė pagal susitarimą. Papildomas nuotraukas atsiųsime pagal pageidavimą.

Gamybos metai: 1993, būklė: naudotas, Milling cutter diameter: 300 mm Maximum notching width: 350 mm Maximum notching depth: 110 mm Maximum profile height: 150 mm Feed length: 500 mm Guedsrv A Hmjpfx Ap Isc Stop adjustable between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity lubrication system Manual feed Weight: approx. 280 kg

Būklė: naujas, Semi-automatic crosscut saw SALVAMAC LEGEND 500 Guodovtrkijpfx Ap Iec Max. cutting height: 125 mm Introductory special price Includes: - Semi-automatic crosscut saw SALVAMAC LEGEND 500 Max. cutting height: 125 mm SAFE – SOLID – FAST The compact, simple, robust, and innovative machine guarantees maximum safety, flexibility, and reliability. Standard equipment: - Automatic safety and pressure device - Ergonomically positioned two-hand control - Rigid safety shield - Incl. carbide-tipped saw blade 500 mm, Z = 108 Technical data: Maximum cutting capacity: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm Speed: 2,800 rpm Compressed air: max. 8 bar Air consumption per cycle: 5 Nl Extraction port: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Minimum distance between stop (left side) and saw blade: 70 mm Minimum distance between stop (right side) and saw blade: 520 mm Minimum distance between two stops (optional): 60 mm Note: Basic price without roller conveyors. When installing the saw, at least 1 m of support table or roller conveyor must be installed on both the left and right sides of the saw. Includes: - Roller conveyor without scale right side, per meter Roller conveyor, 320 mm width, with 100 mm stop rail and galvanized rollers, Load capacity: 230 kg, Diameter: 60 mm, spacing: 250 mm, Right side of the saw, price per meter Note: 1 m and 2 m long roller conveyors can be retrofitted. Includes: - Roller conveyor with stop rail and scale left side, per meter Roller conveyor, 320 mm width, with 100 mm stop rail and galvanized rollers, Load capacity: 230 kg, Diameter: 60 mm, spacing: 250 mm, Left side of the saw, price per meter Note: The stop must be ordered separately. 1 m and 2 m long roller conveyors can be retrofitted. Includes: - Pneumatically pivoting stop, 200 mm length - New showroom machine -