Automatinė diskinė pjovimo staklė aliuminio profiliams

Pressta-Eisele Profilma 510 E-SA

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, slėgis: 6 juosta, LiSEC, KSR-25, right-to-left, year of manufacture 2010 Chjdpfx Agsv Eguys Ijb Vertical glass arrissing machine, height = 2.50 m In fully automatic cycle, the compact grinding machine arrisses the edges of glass panes on all four sides. Inspection during production is possible by appointment. In very good working condition. Available: March / April 2025

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, FOREL Izoliacinio stiklo linija - Plovimo mašina (6 Low-E šepečiai) FOREL VW2500 (2009) Maks. aukštis 2500 mm Min. matmenys 310x160 mm Storis 3-40 mm Chedpey If Ayefx Ag Isb - Skaitytuvas LISEC (2014) - Dujų presas FOREL APG 250 (2009) Maks. matmenys 2500x4500 mm Min. matmenys 190x320 mm Maks. rankinis atidarymas 69 mm Darbo kryptis: iš dešinės į kairę

Būklė: geras (naudotas), • Automatinė staklių sistema, skirta fasuoto paviršiaus šlifavimui Chjdpsvxthtsfx Ag Isb • Pagaminta 1990 m. • Šiuo metu naudojama gamyboje • Daugiau informacijos teikiama pagal užklausą.

Būklė: geras (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 4 000 mm, vidinis ilgis: 6 500 mm, vidinis plotis: 1 500 mm, vidinis aukštis: 2 200 mm, ruošinio aukštis (maks.): 2 200 mm, ruošinio ilgis (maks.): 6 500 mm, Įranga: kabina, Miltelinio dažymo įranga, skirta apdoroti iki L6500 mm ilgio, B1500 mm pločio ir H2200 mm aukščio gaminius. Cjdpfevdlfzjx Ag Ishb

Gamybos metai: 2014, būklė: paruoštas naudoti (naudotas), Max. output capacity: 370 kg/h, connected load: 0.25 kW, length: 950 mm, width: 950 mm, height: 1115 mm, weight: 75 kg, including automatic feed system, frame structure, level valve, inspection chamber, and documentation. Codeh Akm Tjpfx Ag Iohb

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, LINIJOS YPATYBĖS 4 galvų suvirinimo aparatas FUSION 4H Rėmų nukrovimo įrenginys Pirmasis frezavimo modulis Q-MATIC 1 Nuoseklus ryšys tarp suvirinimo ir valymo įrenginių Sukamasis stalas Chodpsy S E E Nsfx Ag Iob Elektroninis valiklis TRIMMER 4A Ištraukimo stalas Antrasis frezavimo modulis Q-MATIC 2 Linijos priežiūros nešiojamas kompiuteris Nupjovimo įrenginys Automatinio rėmų iškrovimo įrenginys

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Overhauled: 2024 Year of manufacture: 1994–2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Codpfx Aouiy Hrog Ijhb Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed: 0 – 40 mm/s, continuously adjustable Cut length: 5–950 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After the retrofit, the machine is in a like-new condition, both technically and visually. Thanks to its equipment and construction, the machine can be used very efficiently for a wide range of applications. The programmed HMI control ensures simple and highly profitable operation of the system. The soundproof cabin minimizes noise emissions. The machine is fully overhauled in-house according to customer requirements. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul and/or replacement of all pneumatic cylinders - Renewal of valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine is equipped with: - Soundproof cabin - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feed of up to 6 m long bar stock - Roller conveyors for bar stock - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your personnel

Būklė: geras (naudotas), Gamybos metai: 2000, Connected load: 430 kW Dimensions: Overall length: 10,750 mm Chjdsip T T Hepfx Ag Isb Width: 3,400 mm Height: 3,900 mm

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, steplessly adjustable Codpeuiy Ngofx Ag Ijhb Saw blade height adjustment: electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. Among other things, the following components have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to servo-controlled pusher - New electrical components - New pneumatic lines - New pneumatic components - Retrofit to valve manifold - Optimized extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishing of the enclosure In addition, the machine features: - Minimum quantity lubrication - Splitter extension (for high-quality cut surfaces without drag marks) - Loading magazine for gentle handling of painted/anodized surfaces - Scrap piece ejection in the pusher - Foldable scrap piece tray Options: - Magazine width: 3,000 mm - Pusher length: 6,000 mm - Pusher length: 8,000 mm - Reinforced motor: 5.5 kW - Multiple clamping device for parallel sawing of several workpieces - Online support connection - Delivery and installation at your site - Training for your staff

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga (išilginė ašis): 4300 mm Y ašies eiga (skersinė ašis): 270 mm Z ašies eiga (vertikali ašis): 300 mm Elektrovelenas 1 HSD – maks. 18000 aps./min – galia 5,5 kW Įrankių keitiklio talpa: 4 Kampinis reduktorius šoniniams darbams Spaustuvų skaičius: 4 Cjdpfx Agsy Drzho Iehb Spaustuvų pozicionavimas: automatinis Svoris: 1950 kg