Stumdomas stalinis pjūklas

Panhans EURO10

Būklė: naudotas, Gamybos metai: 2002, veikimo valandos: 15 152 h, Įranga: visų varančiųjų ratų pavara,

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Pneumatic clamp ensuring precise pressing of the material onto the saw table during cutting. This significantly increases the accuracy and quality of the cut, facilitating and speeding up panel sizing operations. The clamp is very easy to install and operate. Application of a woodworking pneumatic clamp for a panel saw The lack of proper pressure securing the panel on the saw table can cause a number of issues that significantly impact the efficiency and quality of the cutting process. These issues include: - Uncontrolled chipping: Without solid clamping, the panel isn't held securely on the table, which during cutting can result in uncontrolled chips or splinters. This poses a safety risk to operators and may damage both tools and workpieces, raising production costs. Nwjdpovxtcqjfx Abbjf - Excessive material waste: Insufficient pressure can allow the panel to shift during cutting, leading to improper cuts and increased material loss. This may necessitate additional cuts or even complete rejection of the workpiece. - Frayed panel edges: Without stable clamping, vibration and inaccurate cutting may occur, resulting in frayed edges. This not only detracts from the panel’s visual appeal but also from its usability, especially for finishing materials. Benefits of the 3200 mm two-zone pneumatic clamp for panel saws: The solution to these problems is the use of a pneumatic clamp, which ensures the material is firmly pressed against the panel saw table. Key benefits include: - Increased cutting accuracy: The pneumatic clamp ensures stable, even holding of the material, resulting in higher cutting precision and preventing uncontrolled chipping and frayed edges. - Improved cutting quality: With a stable hold, the quality of the cut is significantly improved. Panels are cut cleanly and undamaged, enhancing their value and appearance. - Faster, easier panel processing: Reliable clamping allows operators to work more efficiently and safely, accelerating panel processing and increasing production output. - Easy installation and operation: The pneumatic clamp is straightforward to install and use, requiring no complex procedures and allowing for easy operation. - Two-zone clamping: The pneumatic clamp features two zones (each side equipped with two cylinders), allowing independent control for each side of the saw table. This provides greater flexibility and allows for adaptation to various materials and production requirements. In summary, the pneumatic clamp is a reliable solution for improving panel cutting quality, precision, and efficiency, helping save time and material while reducing the risk of damage and accidents. Technical specifications Clamp length: 3200 mm Material height: 100 mm Number of cylinders: 4 Operating pressure: 2.0 bar Manufacturer: Cormak

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2000, pjovimo ilgis (maks.): 3 300 mm, Šis HOLZMA HPL 23/X/33/22/30/L buvo pagamintas 2000 m. Tai tvirtas naudotas plokščių pjūklas, kurio pjovimo ilgis 3300 mm, 3 stalai su pneumatine pagalve ir kėlimo stalas, kurio matmenys 3300 x 2200 mm. Jame yra 18 kW galios pagrindinis pjūklas ir 2,2 kW galios taškinis pjūklas, valdomas CADMATIC sistema. Susisiekite su mumis ir gaukite daugiau informacijos apie šią mašiną. Nwjdpox D Hlfsfx Abbef

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 27 750 h, bendras svoris: 8 100 kg, Šis 3 ašių PANHANS POLYPAN 47 buvo pagamintas 2006 m. Jis pasižymi 4200 mm pjovimo ilgiu ir pjūvio pločiu, didžiausiu pjovimo aukščiu - 72 mm esant 0° kampui ir 40 mm esant 47° kampui, o pjūklo vežimėlio greitis siekia 100 m/min. Pagrindinio variklio galia - 13,5 kW, jame sumontuotas braižymo įrenginys. Sveria 8100 kg. Jei norite gauti aukštos kokybės pjovimo galimybes, apsvarstykite mūsų parduodamas PANHANS POLYPAN 47 stakles. Susisiekite su mumis dėl išsamesnės informacijos. • Konfigūracija: Mašina su valdymo spinta Nwodpfxox D Rtys Abbof • Pjovimo ilgis (SL): 4200 mm • Pjovimo plotis (SB): 4200 mm • Didžiausias pjovimo aukštis (pjūklo diskas vertikaliai 0°): (42 mm) (42 mm) 72 mm (aukštis (42 mm) • Maksimalus pjovimo aukštis (pjūklo diskas pasuktas 47° kampu): 40 mm (aukštis: 47 mm) • Pjovimo tikslumas (pjūklo diskas vertikaliai 0° kampu): +/- 0,1 mm • Pjovimo tikslumas (pasuktas pjūklo diskas): +/- 0,2 mm • Kampinis tikslumas (pastūmos greitis < 10 m/min): +/- 1 mm. • Kampinis tikslumas (pastūmos greitis > 10 m/min): +/- 2,5 mm. • Padavimo greitis (pjūklo vežimėlis pirmyn/atgal): 0-100 m/min • Padavimo greitis (pločio ribotuvas pirmyn): 25 m/min • Padavimo greitis (pločio stabdymas atbuline eiga): 100 mm • Ašių eigos (mažiausias plokštės dydis): X = 300 mm, Y = 100 mm • Ašies eigos (didžiausias plokštės dydis): 300 x 300 mm: X = 2800 mm, Y = 750 mm • Gręžimo galvutės greitis: 6840 aps/min. • Didžiausias gręžimo skersmuo: 13 mm • Didžiausias bendras ilgis: 115 mm • Įrankių skaičius: Įrankių skaičius: 1 gręžimo velenas • Įrankių laikiklis: Greitai atlaisvinamas griebtuvas DM 1-13 • Prijungimo vertės • Bendra prijungimo vertė: 21,0 kVA • Vardinė srovė: 3x 32 A • Pneumatinė jungtis: 8 bar (mažiausiai 6 bar) • Oro sąnaudos: 3 l/min vienam spaustukui • Garso slėgio lygis (Lpa) operatoriaus vietoje: 86 dB(A) • Garso galios lygis (LWA): 103 dB(A)

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, The dust extractor/collector for blast cabinets is a complete unit equipped with a motor and filter. It effectively removes dust and particles from the sandblaster, improving visibility and eliminating escaping dust. Ideal for large work area cabins, it provides hygienic and safe working conditions. Device Description The dust extractor designed for blast cabinets is a comprehensive solution equipped with a motor and filter to ensure effective dust elimination. It is ideal for use in various types of large-area cabinets where abrasive blasting is performed. Thanks to its advanced design, the extractor efficiently removes dust from the sandblaster, resulting in improved visibility during operation. Dust, which previously escaped from the device, is now effectively collected, ensuring a more hygienic and safe working environment. The integrated motor provides high extraction capacity, enabling efficient dust collection. As a result, users benefit from the effective performance of the extractor, with sand and dust from the blasting process being efficiently captured and retained in the filter. Nwjdpfx Absrh E Azobsf The filter is a key component of the extractor, responsible for trapping dust. It effectively captures dust particles and prevents them from returning to the air inside the cabin, thus protecting operators from inhaling harmful substances and ensuring better air quality around them. The dust extractor for blast cabinets is not only an effective tool for maintaining cleanliness, but also ensures safe working conditions and enhances the efficiency and precision of blasting operations. Technical specifications Extraction power: 1100W Airflow rate: 3 m³/min Power supply: 230 V / 50 Hz Noise level: 85dB Inlet diameter: 52 mm Handle length: 280 mm Extractor dimensions (height x diameter): 730 x 260 mm Filter dimensions (height x diameter): 310 x 170 mm Weight: 9.5 kg The price shown is NET. Delivery costs are not included. For more information, please contact us by phone or email. We invite you to browse our full offer on our website.

Būklė: geras (naudotas), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tie rod cylinder -Hydraulic cylinder: tie rod cylinder, stroke 185 mm -Piston rod: Ø 20 mm / M20 -Dimensions: 475/110/H65 mm Nwjdpev Tla Rofx Abbjf -Weight: 4.5 kg

Būklė: naudotas, Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure piston, tie-rod cylinder, compensation cylinder -Hydraulic cylinder: Tie-rod cylinder, stroke 126 mm -Type: unfortunately without type designation -Piston rod: Ø 38 mm Mountings: Ø 25/30 mm / Distance: retracted 735 mm Njdpfx Absv N Uwwsbjwf Dimensions: 785/75/H107 mm Weight: 13.3 kg