Kombinuotas obliavimo ir storio obliavimo staklės & storio obliavimo staklės

Panhans 446 A

Sąlyga: geras (naudotas), Gamybos metai: 1969, Wood band saw, band saw machine, band saw, vertical band saw Rodpfx Agoh N Thweiep -Manufacturer: Hema Paul & Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive power: 4 kW -Max. cutting width: 785 mm -Max. cutting height: 475 mm -Saw blade length: 5600 mm -Working table: tiltable -Drive motor with brake -Dimensions: 1600/1020/H2430 mm -Total weight: 794 kg

Gamybos metai: 2026, Sąlyga: naujas, The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table product range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested in Accordance with BGI 739-1” seal. This makes it suitable for hand sanding tasks as well as for processing workpieces using handheld machines. The sanding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to its funnel-shaped design with an integrated air duct, the airflow is precisely guided towards the extraction port. Depending on the required extraction performance, the unit can be connected to the on-site extraction system via a Ø 140 mm or Ø 160 mm connection port. The folded edges along both sides of the work surface allow for face-end working on workpieces. The extraction grates are aerodynamically aligned with the extraction port to ensure optimal extraction results. For cleaning inside the sanding table, the slatted grid can be removed and the air duct can be detached by loosening just a few screws. The sanding table is delivered pre-assembled; only the legs need to be installed and adjusted to the required working height. Your advantages: • Accessible from all four sides • Loadable up to 150 kg • Manual, tool-free height adjustment with scale • Offset side edges for edge sanding • Workpiece-friendly beech slatted grid (removable) • Funnel-shaped air guidance to the extraction port Technical data: Rsdpsfyadbsfx Agiep • Extraction port: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at port at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working surface (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Gamybos metai: 1991, Sąlyga: geras (naudotas), Underfloor crosscut saw, crosscut saw, pull saw, mitre saw, panel saw, circular saw, table saw, panel-sizing saw -Manufacturer: Altendorf, panel saw model TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scoring motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Maximum cutting height: 95 mm at 90° / 70 mm at 45° -Mitre cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm Redjmydmbepfx Agiep -Overall dimensions: 3480/1530/H1370 mm -Weight: 1104 kg

Sąlyga: naujas, Gamybos metai: 2022, Working width: 630 mm Planing height: 300 mm Redpohpl T Hjfx Agisp Cutterhead: Tersa Number of knives: 4 Height adjustment: electric Planing thickness display: mechanical counter display Feed speed: 7-11-15-19 m/min Infeed roller: segmented steel Pressure bar: segmented Outfeed roller: rubber Table rollers: none Table extension: Yes, infeed and outfeed Motor power: 7.5 kW Extraction port: 160 mm Machine length: 1070 mm Machine width: 900 mm Weight: 750 kg

Gamybos metai: 2017, Sąlyga: naujas, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 750kg per arm - NEW -: Price ex location including loading! 1 racking unit with 4 uprights: €3,210 (net)! Transport within Germany (excluding islands): €550 (net) A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided rack uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 100 - Each upright fitted with 2 x 3 height-adjustable arms, 1.20m long, 750kg load capacity per arm - Including bracing approx. 1.30m - Upright height approx. 3500mm, hot-dip galvanized - Base and arm depth 1200mm, each with 3 height-adjustable arms - Load capacity with centre of gravity at 600mm: 750kg per arm / 2,250kg per upright - Supplied with longitudinal and diagonal bracing, bay width = 1,300mm (standard is 1.30m) - Other standard bay widths available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m! - For bay widths from 1.50m, a small extra charge applies in addition to the stated price! - Special dimensions (other upright spacings) are available upon request, subject to an extra charge and longer delivery time as these are custom-made! - If you do not specify a different upright spacing, the racking will be supplied with a bay width of 1.30m. - In this case, the total length for one rack row with 4 uprights (3 bays) is approx. 4m. Rjdpfxsddmtqe Agiep - Supplied with all bolts and nuts (shipped within Germany by parcel directly from Würth), without floor anchors. Other configurations (frame heights, arm lengths, arm types, etc.) available! Please contact us!

Sąlyga: labai geros būklės (naudotas), Katalogo numeris 7739 TECHNINIAI DUOMENYS LYGINIMO STAKLĖS: - veleno plotis 410 mm - 3 peilių velenas - triukšmą mažinantis šukas - veleno apsauga - kampu reguliuojamas liniuotė - stalų ilgis 2060 mm - abu stalai reguliuojami STORIO OBLIUS: - maksimalus ruošinio storis 240 mm - storio obliaus veleno apsauga *iš viršaus: Rjdpfsxbp Anox Agiep - stabdžiai - traukos velenas dantytas, lankstus - prispaudėjai - obliaus velenas - prispaudėjas - glotnus išleidimo velenas - apatinėje stalo dalyje 2 reguluojami volai - pagrindinis variklis 5,5 kW - elektrinis stabdis - elektrinis stalo pakėlimo/leidimo reguliavimas - ištraukimo jungties skersmuo 120 mm - matmenys ilgis/plotis/aukštis 2060x970x1150 mm - svoris 660 kg PRIVALUMAI – itališka gamyba – triukšmą mažinantis šukas – nenudažyta – idealios būklės – kombinuotos lyginimo-storio obliaus naudotos Grynasis kaina: 22 900 PLN Grynasis kaina: 5 450 EUR, pagal kursą 4,2 EUR (Kainos gali keistis priklausomai nuo valiutų svyravimų)

Gamybos metai: 2025, Sąlyga: naujas, Airstreamer 480 – Extraction System for Aluminium Chips The Airstreamer 480 is a high-performance extraction unit for aluminium chips, ideally suited for industrial applications. Its robust construction and mobile design with a detachable chip container make it highly versatile and easy to empty. Technical data: ✔ Weight: 120 kg, mobile on castors ✔ Chip container: 110-litre capacity, easily detachable ✔ Filter: M-class polyester, antistatic version ✔ Pneumatic filter cleaning (pneumatic connection required on site) ✔ Motor: 2.2 kW, 400 V, 50 Hz ✔ Suction port: 100 mm diameter ✔ Airflow: 1,500 m³/h ✔ Nozzle pressure: 30 mbar ✔ Dimensions (W x D x H): approx. 69 x 90 x 241 cm Safety notice: ⚠️ Certain dust types and particles can be combustible, which may result in filter fires or dust explosions. The operator is required to take suitable measures to prevent ignition sources and comply with the applicable ATEX regulations. ⚠️ This unit is not ATEX-certified as standard. An ATEX Zone 22 version is available on request. Optional accessories: 🔹 Super-flexible suction hose (120 mm), low-friction design 🔹 Antistatic kit for earthing all metal parts of the extractor 🔹 Remote start unit 🔹 Cleaning set (60 mm) for floor and machine cleaning, made of PVC Includes floor and machine cleaning nozzle, 4 m suction hose and adapter Redpfx Agspa Nwysijp 🔹 Y hose adapter (100 mm to 100 + 60 mm) with shut-off slide 🔹 XXL silencer for reduced operating noise and increased efficiency The Airstreamer 480 provides a reliable and efficient solution for the extraction of aluminium chips in industrial production processes. Plantec Maschinen GmbH