Pjovimo mašinos pirkti naudotą (47)

Būklė: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, bendras plotis: 1 800 mm, bendras ilgis: 16 500 mm, įėjimo įtampa: 400 V, įėjimo srovė: 10 A, 21 C – GERBER Spreader SY 101 Fabric Spreading Machine – Complete Cutting Line Description Klsdpfx Aloy Avqdsrsw For sale is a GERBER Spreader SY 101 industrial fabric spreading system, including the spreading machine and complete table setup. This system is designed for efficient and precise spreading of fabric layers on long cutting tables in apparel manufacturing. It ensures consistent material feeding, accurate layer control, and significantly increases productivity in the cutting room. The setup was operated as part of a complete production line together with a Gerber automatic fabric loader (unit 31 C) and a Lectra VT-FA-MH-71 CNC cutting system (unit 29 C). This configuration enables a seamless workflow from roll handling, spreading, to cutting, greatly reducing manual labor while achieving higher throughput. The machine was in operation until the factory closure, serviced on 27.02.2026, and is documented in an operational video dated 05.03.2026. Scope of delivery • GERBER Spreader SY 101 • Rail-guided motorized drive system • Integrated control panel • Long spreading tables (approx. 16.5 m) • Fabric roll holder • Conveyor belt or air floating (air cushion) table system • Interfaces for integration with loader and cutting systems Technical data • Manufacturer: Gerber Technology • Model: SY 101 • Type: Fabric spreading machine • Application: Cutting room / spreading line Capacity • Max. roll width: approx. 1800 mm • Max. roll weight: approx. 100 kg • Max. roll diameter: approx. 500 mm • Max. lay height: approx. 230 mm Performance • Spreading speed: up to 100 m/min • Length accuracy: ±2 mm Connections • Voltage: 230 V / 400 V, 50/60 Hz • Power: approx. 2.5 kW • Compressed air: approx. 6 bar System features • Air cushion table for low-friction movement of heavy fabric layers • Tension-free material feed • Precise length measurement to minimize material waste • Compatible with automatic loaders and CNC cutting systems Advantages • High precision reduces material waste • Continuous production flow • Reduced manual labor • Suitable for denim, workwear, and technical textiles • Modular system for flexible layouts Condition Used industrial condition Operational prior to decommissioning Normal signs of use present Inspection prior to dismantling possible Sold as seen (“as-is, where-is”), without warranty Location: Valga, Estonia Dismantling and transport To be organized by the buyer Professional dismantling recommended

Būklė: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 636, įvesties srovės tipas: trifazis, bendras plotis: 1 800 mm, įėjimo įtampa: 400 V, įėjimo srovė: 10 A, kėlimo aukštis: 2 000 mm, keliamoji galia: 250 kg, 31 C – Gerber Automatic Fabric Loading System (250 LU) – Industrial Spreading Line Unit Description For sale is a Gerber automatic fabric loading system (model 250 LU), designed for integration into industrial spreading and cutting lines. Kledpfx Aley Av H Sjrsw This unit enables efficient, safe, and controlled handling of heavy fabric rolls, significantly reducing manual labor in high-volume production environments. The installation was operated as part of a fully integrated production line together with a GERBER SY 101 spreading system (unit 21 C) and a Lectra Vector VT-FA-MH-71 CNC cutting system (unit 29 C). This configuration enables a seamless workflow from roll handling to spreading to cutting, maximizing production output with minimal downtime. The machine was used in a professional garment manufacturing facility and was functional until factory closure. Last serviced on 27.02.2026. Scope of delivery • Gerber automatic fabric loading system • Motorized lifting and roll feed system • Adjustable frame construction • Integrated operating controls and switches • Heavy-duty steel frame with rollers Technical details • Manufacturer: Gerber Technology • Model: LS-250-LU • Year of manufacture: 2004 • Serial number: 636 • Type: Automatic fabric roll loading system • Load capacity: up to 250 kg • Net weight: approx. 300 kg • Voltage: 3 × 380 V • Frequency: 50 Hz • Current draw: approx. 10 A Functionality • Automatic lifting and positioning of fabric rolls • Precise alignment for transfer to spreading machines • Consistent and controlled material feed • Mobile design for flexible use in production areas Production benefits • Reduces manual lifting of heavy rolls • Improves workplace safety and ergonomics • Minimizes downtime during roll changes • Supports continuous production processes • Ensures precise material feeding Integration • Optimized for Gerber spreading systems (e.g. SY 101) • Compatible with automated cutting lines (e.g. Lectra Vector) • Suitable for fully integrated production environments Condition Used industrial condition Serviced on 27.02.2026 Fully functional prior to decommissioning Normal signs of use present Inspection recommended Sold as seen ("as-is, where-is"), without warranty Applications • Spreading systems • Textile production • Automated cutting rooms • High-throughput garment industry Location Valga, Estonia Dismantling and transport To be organized by the buyer Professional handling recommended due to size and weight

Būklė: naudotas, Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 9A5822, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, įėjimo srovė: 60 A, bendras aukštis: 1 800 mm, pjovimo plotis (maks.): 1 720 mm, pjovimo aukštis (maks.): 50 mm, suslėgto oro jungtis: 6 juosta, For sale is an automatic CNC textile cutting system Lectra Vectorfashion VT-FA-MH-71, offered as a complete industrial production line. This system is designed for high-volume, precision fabric cutting in the apparel industry. It enables automatic multi-layer cutting with consistent quality, significantly increasing production efficiency compared to manual processes. The machine was operated as part of a standalone and fully integrated cutting line together with a GERBER SY 101 spreading system (Unit 21 C) and a Gerber automatic fabric loader (Unit 31 C). This configuration provides a continuous workflow from roll handling and spreading through to cutting, minimizing manual intervention. The system includes a large-format vacuum cutting table, a gantry-guided cutting head, as well as an integrated extraction and filtration system. Computerized operation ensures precise execution of cutting patterns and production sequences. The equipment was used in a professional garment manufacturing environment and was fully operational until the plant closure. The last maintenance was performed on 27.02.2026; an operational video dated 05.03.2026 is available. Scope of delivery: • Lectra Vector CNC cutting system • Gantry-guided cutting head • Conveyor-based cutting surface • Industrial vacuum system (approx. 30 kW) • Extraction and filtration system • Computer workstation with control unit Technical data: • Manufacturer: Lectra, France Klodpjy Avg Esfx Alrjw • Model: VT-FA-MH-71 • Serial number: 9A5822 • Year of manufacture: 2009 • Cutting technology: oscillating knife, suitable for multi-layer operation • Control system: computer-based (Lectra software environment) Electrical requirements: • Control unit: approx. 230 V • Vacuum system: approx. 400 V, up to 30 kW • Compressed air: 5–7 bar, dry and filtered Cutting performance: • Multi-layer cutting (approx. 25–70 mm, depending on material) • High speed and precision • Continuous material feed for efficient production Condition: Used industrial condition, was operational prior to decommissioning Typical signs of use present Sold as inspected (“as-is, where-is”), without warranty Areas of application: Garment manufacturing, denim and workwear, technical textiles as well as upholstery and automotive applications Location: Valga, Estonia Dismantling and transport: To be arranged by the buyer, professional dismantling is recommended

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 82415, įvesties srovės tipas: trifazis, bendras plotis: 1 500 mm, bendras ilgis: 2 500 mm, įėjimo įtampa: 400 V, įėjimo srovė: 16 A, pjovimo aukštis (maks.): 100 mm, 22 C – Finn-Convey Industrial Fabric Spreading and Cutting Line (14.65 m x 1.8 m) – Complete with Air Flotation Table Description For sale is a professional Finn-Convey fabric spreading and cutting line in industrial design, offered as a fully operational system. This system is designed for efficient fabric spreading and preparation in the cutting room. It enables controlled handling of heavy fabric rolls, precise layer formation, and smooth material flow prior to cutting. The system was operated as a standalone production line together with a Bergman cross-cutting saw (Unit 114 A). This combination allows for efficient pre-cutting of fabric rolls to the desired length before spreading, optimizing workflow and reducing manual labor. The system was used in a professional garment manufacturing facility and remained functional until the plant closure. Main Technical Specifications • Total length: 14.65 meters (modular design, adaptable) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table for low-friction material transport • Drive: Motorized side drives to control spreading tension System Components • Finn-Convey motorized side drives • Industrial air flotation table with perforated surface • Integrated blower system (centrifugal fans mounted under the tables) • Electrical control cabinet for system management • Fabric roll holders and support equipment Ksdpfxey Au Hqe Alrolw • Integrated end cutting unit with rotary blade Technical Details of the Cutting Unit • Speed-controlled AC motor (Taili Motor Co., Ltd., approx. 90–200 W) • Gear unit (e.g. 5GN series) for high torque output • Rotary blade with integrated sharpening device • Height-adjustable guide rails for different material thicknesses • Designed for multi-layer cutting Additional Drive Components • Auxiliary motor (e.g. 40 W class, speed-controlled) for fine movements • Gear-based power transmission for stable continuous operation • External capacitor for single-phase operation (typical for auxiliary drives) System Architecture • Modular table structure for flexible adaptation to production layouts • Air-assisted material movement to reduce friction • Tension-free fabric feed through suitable roll systems • Mechanical or encoder-based length measurement, depending on configuration • Compatible with upstream cutting systems and manual processes Production Advantages • High efficiency due to long spreading lengths and reduced material waste • Ergonomic operation – heavy fabric layers can be moved easily • Precise layer control via controlled drive units • Integrated cutting function improves workflow • Suitable for denim, upholstery fabrics, and technical textiles Condition Used industrial condition Taken directly from ongoing production Normal signs of use Inspection prior to dismantling possible Sold as seen ('as-is, where-is'), without warranty Location Valga, Estonia Dismantling and Transport To be organized by the buyer

Būklė: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Custom made, įvesties srovės tipas: trifazis, bendras plotis: 1 800 mm, bendras ilgis: 14 650 mm, įėjimo įtampa: 400 V, įėjimo srovė: 16 A, pjovimo plotis (maks.): 1 800 mm, 22 C – Finn-Convey Industrial Fabric Spreading and Cutting Line (14.65 m x 1.8 m) – Complete with Air Flotation Table Description For sale is a professional Finn-Convey fabric spreading and cutting line in industrial design, offered as a fully operational system. Kjdoy Au Aljpfx Alrelw This system is designed for efficient fabric spreading and preparation in the cutting room. It enables controlled handling of heavy fabric rolls, precise layer formation, and smooth material flow prior to cutting. The system was operated as a standalone production line together with a Bergman cross-cutting saw (Unit 114 A). This combination allows for efficient pre-cutting of fabric rolls to the desired length before spreading, optimizing workflow and reducing manual labor. The system was used in a professional garment manufacturing facility and remained functional until the plant closure. Main Technical Specifications • Total length: 14.65 meters (modular design, adaptable) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table for low-friction material transport • Drive: Motorized side drives to control spreading tension System Components • Finn-Convey motorized side drives • Industrial air flotation table with perforated surface • Integrated blower system (centrifugal fans mounted under the tables) • Electrical control cabinet for system management • Fabric roll holders and support equipment • Integrated end cutting unit with rotary blade Technical Details of the Cutting Unit • Speed-controlled AC motor (Taili Motor Co., Ltd., approx. 90–200 W) • Gear unit (e.g. 5GN series) for high torque output • Rotary blade with integrated sharpening device • Height-adjustable guide rails for different material thicknesses • Designed for multi-layer cutting Additional Drive Components • Auxiliary motor (e.g. 40 W class, speed-controlled) for fine movements • Gear-based power transmission for stable continuous operation • External capacitor for single-phase operation (typical for auxiliary drives) System Architecture • Modular table structure for flexible adaptation to production layouts • Air-assisted material movement to reduce friction • Tension-free fabric feed through suitable roll systems • Mechanical or encoder-based length measurement, depending on configuration • Compatible with upstream cutting systems and manual processes Production Advantages • High efficiency due to long spreading lengths and reduced material waste • Ergonomic operation – heavy fabric layers can be moved easily • Precise layer control via controlled drive units • Integrated cutting function improves workflow • Suitable for denim, upholstery fabrics, and technical textiles Condition Used industrial condition Taken directly from ongoing production Normal signs of use Inspection prior to dismantling possible Sold as seen ('as-is, where-is'), without warranty Location Valga, Estonia Dismantling and Transport To be organized by the buyer

Būklė: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 75080154.1/TKT 2, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, įėjimo srovė: 40 A, 30 C – FINN-CONVEY V307 Conveyor Belt Table System with 3 Levels – Modular Conveyor Solution for Cutting Rooms Description For sale is a FINN-CONVEY V307 conveyor belt table system with 3 levels, designed for use in textile cutting rooms. This system provides a modular, conveyor-driven table solution for material transport and fabric handling within the production process. It enables efficient workflow between spreading, buffering, inspection, and cutting operations. The unit was operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 (unit 35 C). This integration significantly reduces manual labor and downtimes, especially when changing fabric rolls and feeding materials. The video footage also shows a GERBER XLS-125-180-L spreader (unit 32 C) that was deployed on the same production line. The system was used in a professional garment manufacturing environment and remained fully operational until plant closure. Last serviced on 27.02.2026. Scope of delivery • FINN-CONVEY V307 conveyor belt table system • Multi-level conveyor structure (3 levels) • Integrated belt conveyor system • Drive motors and gearbox units • Sensors for positioning and control • Control cabinet Technical specifications • Manufacturer: Finn-Convey • Model: V307 • Type: Conveyor belt table system • Application: Fabric handling and transport in the cutting room • Configuration: Modular multi-level system • Levels: 3-tier buffer structure • Power supply: Industrial three-phase current Advantages • Fully integrable into automated cutting systems (Lectra compatible) • Reduced manual labor for material handling • Continuous material flow for optimized cutting processes • Modular system, adaptable to various production layouts • Heavy-duty industrial build for long service life Production efficiency The 3-level buffer structure enables continuous operation of the cutting line through a consistent material feed. This reduces downtime and enables • Higher throughput in the cutting process • Efficient batch handling • Improved synchronization of production processes Processing quality Finn-Convey systems are renowned for their robust mechanical construction, designed for long-term industrial use. With proper maintenance, reliable operation over many years is ensured. Condition Used production condition Fully functional until plant shutdown Klodjy Akpzjpfx Alrow Normal signs of use from production Inspection prior to dismantling possible Sale as inspected ("as-is, where-is"), without warranty Typical applications • Conveyor systems in cutting rooms • Fabric transport and material handling • Optimization of workflow in the garment industry • Textile production lines Location Valga, Estonia Dismantling and transportation To be organized by the buyer Professional dismantling recommended due to the size of the system

Būklė: naudotas, Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20082, įvesties srovės tipas: trifazis, bendras plotis: 2 000 mm, bendras ilgis: 6 700 mm, įėjimo įtampa: 400 V, įėjimo srovė: 10 A, 32 C – GERBER XLS-125-180-L Automatic Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreader, designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer spreading of fabrics directly onto a conveyor table. The motorized spreading carriage ensures consistent material feed, accurate alignment, and a constant production speed, making the system ideal for demanding production environments. The machine is considered a proven workhorse in the industry and can process a wide range of materials, from heavy denim to lightweight fabrics. The system was operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). This combination significantly enhances production flow, reduces manual labor, and enables continuous high-performance operation. The unit was in use in a professional apparel manufacturing facility and was fully functional until the plant closure. Last serviced on 27.02.2026. Operating video available (05.03.2026). Scope of Delivery • GERBER XLS automatic fabric spreader • Motorized spreading carriage • Roll holding system • Integrated touchscreen control panel • Fabric alignment and infeed system • Mounted rail system for table use Technical Data • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year of manufacture: 2009 • Serial number: 20082 • Max. roll weight: 125 kg • Max. roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current draw: approx. 10 A Key Features • Fully automatic spreading to reduce manual labor • Suitable for roll and folded goods • Precise tension control to prevent material distortion • Accurate edge alignment for material optimization • Touchscreen operation for easy programming • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading increases cutting room efficiency • Even tension ensures dimensionally stable cuts • Optimal preparation for multi-layer cutting Maintenance & Reliability Gerber spreading systems are renowned for good parts availability and long service life. Condition Used, production-ready condition Fully functional prior to decommissioning Last serviced on 27.02.2026 Operating video available (05.03.2026) Normal signs of use from production Inspection prior to dismantling possible Sale as inspected (“as-is, where-is”), without warranty Typical Applications • Automatic fabric spreading Kjdpfjy Alcijx Alrslw • Preparation for multi-layer cutting • Denim and heavy fabric processing • High-volume garment manufacturing • Cutting room applications Location Valga, Estonia Dismantling and Transport To be organized by the buyer Professional dismantling is recommended due to the size of the system

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, veikimo valandos: 5 500 h, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, padavimo ilgis X ašis: 1 750 mm, padavimo eiga Y ašimi: 1 800 mm, padavimo ilgis Z ašis: 60 mm, X ašies padavimo greitis: 120 m/min, Y ašies padavimo greitis: 120 m/min, pjovimo plotis (maks.): 1 750 mm, pjovimo aukštis (maks.): 60 mm, suslėgto oro jungtis: 6 juosta, Automatinė konvejerinė pjovimo mašina OROX ICUT C600, pagaminta 2022 m., puikios darbinės būklės. Mažai naudota, nedidelė darbo valandų rida. Pilnas komplektas: - OROX ICUT C600, pjovimo sritis 180x175 cm, su visais standartiniais priedais - FLESE išmanusis peilis - COVER antroji plėvelės spaudimo sistema - POPS išmanioji ženklinimo/pažymėjimo sistema - Ištiesimo stalai: iš viso 12 m (10 m su oro pagalve + 2 m standartiniai) Techninės specifikacijos: - Maks. pjovimo aukštis: 6 cm (sutankintas sluoksnis) - Maks. pjovimo greitis: 60 m/min - Ašies greitis: 120 m/min, pagreitis 0,8 G - Galia: maks. 19 kW / vidutinės sąnaudos 8–9 kW - Maitinimas: trifazis 400V 50Hz - Suspaustas oras: 150 l/min prie 6 bar - Svoris: apie 2 700 kg - Operacinė sistema: Windows 10, Intel i5 Funkcijos: EVAS elektroninė vakuuminė sistema, RIVER SYSTEM nepertraukiamas pjovimas, lazerinis zonos nustatymas, automatinė diagnostika, duomenų perdavimas belaidžiu/LAN ryšiu, CAD sąsaja ISO/DXF, automatinis stalo valymas, peilio galandinimo sistema. Tinka: audiniams, dirbtinei odai, porolonui, baldiniam porolonui, laminuotoms medžiagoms, techniniams tekstilės gaminiams. Vietovė: Kaunas, Lietuva (ES). Galima apžiūrėti iš anksto susitarus. Kjdpfx Aszb U Hmslrslw

Būklė: naudotas, Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: BRP2014C04, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, įėjimo srovė: 24 A, suslėgto oro jungtis: 6 juosta, Siūlome šią naudotą Meevo MKF MKF BR 320 audinių pjovimo mašiną, pagamintą 2014 metais. Mašinos tipas: Tekstilės pjovimo mašina Pagaminimo metai: 2014 Įtampa: 400 V Kljdpfxozg Tu So Alrow Srovė: 24 A Slėgis: 6 bar Dažnis: 50 Hz Trumpalaikės srovės stipris: 10 kA Svoris: 1500 kg Fazės: 3 Jeigu turite klausimų ar reikalinga papildoma informacija, drąsiai rašykite žinutę arba paskambinkite mums.

Būklė: naudotas, Gamybos metai: 2021, veikimo valandos: 10 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: NRGL614.01025, įvesties srovės tipas: Oro kondicionierius, bendras plotis: 3 340 mm, įėjimo įtampa: 400 V, įėjimo srovė: 19 A, SEI NRGL 1612 V300 – 300 W galios pramoninis CO₂ lazerinis pjovimo įrenginys su automatine medžiagos tiekimo sistema – veikiantis. Parduodamas pramoninis SEI NRGL 1612 V300 lazerinis pjovimo įrenginys. Pagamintas 2021 m., aprūpintas 300 W galios CO₂ lazeriu ir medžiagos tiekimo sistema. Kodszcny Aepfx Alrslw Įrenginys yra visiškai veikiantis ir galima jį apžiūrėti. Apytikslis veikimo laikas – 10 000 valandų. Pagrindinės savybės: • SEI NRGL 1612 V300 • Pagaminimo metai: 2021 • 300 W CO₂ lazeris • Darbinis plotas: 1600 × 1200 mm • Komplektuojamas su automatine medžiagos tiekimo sistema • Apytikslis veikimo laikas: 10 000 valandų • Veikiantis, galima atlikti bandymus • Vieta: Miunchenas, Vokietija Tinka pramoniniam apdirbimui: akrilas, tekstilė, techniniai audiniai, mediena, popierius, kartonas ir kitos nemetalinės medžiagos. Kaina: 70 000 EUR (galima derėtis) Papildomos nuotraukos, vaizdo įrašai, techninė dokumentacija ir apžiūros terminai teikiami pagal užklausą. Transportavimo išlaidos neįskaičiuotos, galima aptarti ir susitarti dėl jų.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, veikimo valandos: 15 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2002-045, bendras plotis: 2 900 mm, bendras ilgis: 3 300 mm, Naudota CNC pjaustymo/plotterio mašina. Pjovimo plotas X ir Y kryptimis: 2.500 x 2.100 mm. Daugiafunkcis CAM pjovimo sprendimas pagal CNC peilio technologiją dvimačiam odos, audinių, techninių tekstilės gaminių, putplasčio ir kitų plokščių, pusiau lankščių ar standžių nemetalo medžiagų pjovimui. Naudotos mašinos įranga: • 1 pjovimo tiltas ir 1 daugiafunkcis įrankių galvutė Mašina parduodama su CCD kamera spaudos ženklų atpažinimui • Daugiafunkcis įrankių galvutė, galinti laikyti 3 keičiamus įrankius • Galingas vakuuminis ventiliatorius medžiagos fiksavimui • Standartinėje komplektacijoje įtrauktas pilkas konvejerinis stalas (konvejeris). Galimas žalsvai mėlynas konvejerio keitimas (didesniam kontrastui dirbant su tamsiomis medžiagomis) Papildomi įrankiai (pagal užklausą): • EOT elektrinis osciliuojantis peilis • POT pneumatinis osciliuojantis peilis • PRT varomas apvalus peilis • UCT universalus peilis (traukiamasis peilis) • KCT pusinio pjovimo įrankis Kodpfx Aefnlkwelrelw • CTT įspaudimo įrankis • V-Cut kampinio pjūvio peilis • Spaudos ženklų atpažinimas • Kamera registracijai • Įrankis skylutėms ar įpjovoms • Freza su ištraukimo sistema Lengvas valdymas • Paprastai keičiami pjovimo įrankiai, „PLUG & CUT“ • Intuityvi vartotojo sąsaja • Greitas peilių keitimas • Vakuumines zonas galima aktyvuoti vienu mygtuku Greitas atsiperkamumas • Mažos sąnaudos, didelė pridėtinė vertė • Geriausias medžiagų išnaudojimas naudojant nest expert programinės įrangos modulius (neįeina į komplektaciją) • Didelis greitis • Nuolatinis tikslumas Duomenys: • Trumpi pjovimo laikai dėl didelio pozicionavimo greičio iki 90 m/min • Kartojimo tikslumas +/- 0,25 mm • Pjauna vieną arba kelis sluoksnius • Tinka plokštinėms ir ruloninėms medžiagoms (galima papildoma išvyniojimo įranga) • Greitas atsiperkamumas (Produkto nuotrauka – pavyzdinė) Mašina turi CE sertifikatą.

Būklė: geras (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S2501CV, pjovimo plotis (maks.): 1 600 mm, pjovimo aukštis (maks.): 25 mm, Bullmer CNC pjaustyklė Turbocut S2501CV – patikima ir paruošta darbui Parduodama Bullmer CNC pjaustymo staklės Turbocut S2501CV, 2004 metų gamybos, geros ir pilnai veikiančios būklės. Įrenginys veikia patikimai ir yra iškart paruoštas naudojimui. Jau atnaujinta: - Naujas peilio variklis - Naujas valdiklis Kedpfxoy Tl Nwj Alrolw Be to, komplektacijoje yra du originalūs Baldor atsarginiai valdikliai – puikiai tinka kaip atsarga ir ilgalaikei eksploatacijos apsaugai. Pjaustyklė idealiai tinka profesionaliam naudojimui ir pasižymi patikrinta Bullmer kokybe. Peržiūra ir bandomasis paleidimas galimi bet kuriuo metu pagal susitarimą.

Būklė: naudotas, Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Lectra VT-FA-MH-71 CNC pjovimo staklė plotis: 170 cm Kedewzxz Nepfx Alrelw ilgis: 185 cm išleidimo konvejeris: 200 cm Maks. pjovimo aukštis: 5 cm CNC valdymas

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1985, Parduodama Bullmerwerk audinių klojinio mašina kartu su Wastema juostinio pjovimo mašina. 1) Bullmerwerk audinių klojinio mašina, ESV20-160, maks. audinio plotis: 1800 mm, stalo ilgio diapazonas: apie 9500 mm - 13500 mm, stalo pločio diapazonas: apie 1800 mm - 2000 mm, maks. sluoksnio ilgis: apie 11000 mm. Pagaminimo metai: 1985. 2) Wastema juostinio pjovimo mašina, pjovimo aukščio diapazonas: apie 250 mm - 300 mm, išsikišimo diapazonas: apie 750 mm - 1270 mm, juostos greitis: apie 16 m/s, svoris: apie 300 kg. 3) Rietschle SKG 226-2.02 vakuuminis blokas, pagaminimo metai: 1984. Komplektaciją sudaro 3 vnt. km Mack KS-AU-V, apsukos: 3000/3600 aps./min. Apžiūra galima pagal susitarimą. Klsdpezf Nb Ssfx Alrew

Būklė: naudotas, Gamybos metai: 2009, iš žinomos gamybos įmonės Bulgarijoje Kjdpfjzd Ry Tex Alrslw

Būklė: geras (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, bendras plotis: 4 500 mm, bendras ilgis: 4 500 mm, įėjimo įtampa: 400 V, darbinis plotis: 2 000 mm, pjovimo plotis (maks.): 2 000 mm, Siūlome kameromis valdomą CNC pjaustytuvą, skirtą atskirų sluoksnių tekstilės ir odos pjovimui. Naudojant integruotą vaizdo apdorojimą, galima atpažinti formas bei dizainus ir tiksliai juos išpjauti. Įrenginys beveik nenaudotas, veikia nepriekaištingai! Klsdpfx Alsyx I Dujrjw

Būklė: naujas, Gamybos metai: 2026, veikimo valandos: 10 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Parmel_042026PA, įvesties srovės tipas: trifazis, bendras plotis: 2 504 mm, bendras ilgis: 5 768 mm, įėjimo įtampa: 400 V, padavimo eiga Y ašimi: 2 500 mm, darbinis plotis: 1 800 mm, bendras aukštis: 1 330 mm, kartojimo tikslumas: 0,01 mm, pjovimo plotis (maks.): 1 600 mm, pjovimo aukštis (maks.): 50 mm, suslėgto oro jungtis: 4 juosta, BUFFALO Cutter – audinių ir tekstilės pjovimo staklės Mūsų BUFFALO Cutter yra idealus sprendimas tiksliam tekstilės, odos, techninių audinių ir kompozitinių medžiagų pjovimui. Naudojant moderniausią CNC technologiją, užtikrinamas: • Didžiausias pjovimo tikslumas šablonams, prototipams ir masinei gamybai • Lankstumas įvairioms medžiagoms ir formatams • Efektyvumas dėl trumpų paruošimo laikų ir automatizuotų procesų Nesvarbu, ar tai būtų mados, baldų ar automobilių pramonė – mūsų audinių ir tekstilės pjovimo staklės užtikrina puikius rezultatus su maksimaliu našumu. Modelis PC W16L25 • Vieno sluoksnio pjovimas iki 50 mm storio • Darbinis plotas (plotis × ilgis): 1600 mm × 2500 mm • 2 pjovimo galvos, dviguba pjovimo galva, adatų presas ir laikiklis braižytuvui • Įrankių paketas: ERT, EOT, VPT (elektrinis apskritas peilis, osciliacinis peilis, štampavimo modulis) • KIS (Peilio inicializavimo sistema) • Vakuuminis siurblys • Oro kompresorius • Pasyvus ritinių padavėjas neelastingiems audiniams • Parmel pjovimo programinė įranga • 12 mėnesių garantija Kodpfszf Ifvjx Alrslw Teikiame įrengimo, mokymų paslaugas, atsargines dalis, eksploatacines medžiagas ir užtikriname sklandų darbą tiek garantiniu, tiek pogarantiniu laikotarpiu.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: div., Parduodama: Kodewpww Eopfx Alrjlw • 1 vnt. Kuris Pionier klojimo mašina su stalu, automatiniu servo peiliu bei juostiniu peiliu. Komplektacijos kaina: 6 750 € (išardymą atlieka pirkėjas) • 1 vnt. Kuris Pionier klojimo mašina su stalu ir juostiniu peiliu. Komplektacijos kaina: 5 750 € (išardymą atlieka pirkėjas) • 1 vnt. Bierrebi automatinis štampavimo aparatas su peilių paruošimo stalu. Kaina: 4 950 €

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, darbinis plotis: 3 000 mm, bendras aukštis: 1 000 mm, pjovimo aukštis (maks.): 10 mm, The ATOM FlashCut EASY 888 L30 cutter plotter is an advanced digital knife cutting system, engineered for precise and rapid cutting of diverse materials such as leather, textiles, foams, and plastics. It is especially valued in the footwear, leather goods, and in the production of gaskets and technical components sectors. ⸻ 📐 Technical specifications • Working area: 3000 × 1000 mm • Power consumption: 13.5 kW • Overall dimensions: 3765 × 1955 × 2805 mm (height) • Weight: 1,320 kg ⸻ ⚙️ Main features • Versatility: The plotter allows cutting of a wide range of materials, from soft leathers to rigid plastics. • Ergonomics: The compact and ergonomic design ensures ease of use and saves space in the production facility. • Vacuum system: A double-zone vacuum system ensures stable material hold during cutting. • Cutting head: Supports a variety of tools, including oscillating knives and creasing wheels, offering increased production flexibility. ⸻ 🏭 Industrial applications The ATOM FlashCut EASY 888 L30 plotter is used in: • Footwear and leather goods manufacturing • Gasket and technical component production • Textile and furniture industries Kodpfx Aley D Sa Dorolw • Packaging and advertising material production ⸻ 🛠️ Additional information The L30 model is especially recommended for companies looking for a solution combining high cutting precision with production efficiency. Capable of processing large-format materials and compatible with a range of cutting tools, this plotter excels in both mass production and bespoke projects.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, The ATOM FlashCut 3010 plotter is an advanced digital knife cutting machine designed for precise and efficient cutting of various materials, such as leather, textiles, foam, and plastics. It is especially valued in the footwear, leather goods, and technical gasket/component manufacturing industries. ⸻ Kodpoy D E R Njfx Alrslw 📐 Technical specifications • Working area: 3000 × 1000 mm • Power consumption: 13.5 kW • External dimensions: 3765 × 1955 × 2805 mm (height) • Weight: 1320 kg ⸻ ⚙️ Key features • Versatility: The plotter enables cutting of various materials, from soft leathers to hard plastics. • Ergonomics: The compact, ergonomic design ensures easy operation and space-saving in production facilities. • Vacuum system: The dual-zone vacuum system guarantees stable material hold during cutting. • Cutting head: Supports various tools, including oscillating knives and creasing wheels, increasing production flexibility. ⸻ 🏭 Industrial applications The ATOM FlashCut EASY 3010 plotter is used in: • Footwear and leather goods production • Manufacturing of gaskets and technical components • Textile and furniture industries • Production of packaging and advertising materials ⸻ 🛠️ Additional information The 3010 model is particularly recommended for companies seeking a solution that combines high cutting precision with production efficiency. Owing to its capacity to process large-format materials and compatibility with various cutting tools, this plotter is ideal for both series production and custom projects.

Būklė: labai geros būklės (naudotas), Schneiderautomat powered by Gemini in sehr gutem Zustand. 2 Stück auf Lager. Kedspxnyyjpfx Alrelw

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: C3030, įvesties srovės tipas: trifazis, bendras plotis: 1 900 mm, bendras ilgis: 4 200 mm, įėjimo įtampa: 400 V, įėjimo srovė: 50 A, padavimo ilgis X ašis: 1 700 mm, padavimo eiga Y ašimi: 1 700 mm, padavimo ilgis Z ašis: 300 mm, darbinis plotis: 1 700 mm, bendras aukštis: 850 mm, kartojimo tikslumas: 0,1 mm, X ašies padavimo greitis: 80 m/min, Y ašies padavimo greitis: 60 m/min, padavimo greitis Z ašis: 1 m/min, pjovimo plotis (maks.): 1 700 mm, pjovimo aukštis (maks.): 80 mm, suslėgto oro jungtis: 6 juosta, Komplette Zuschnitt- und Lagenlegerlinie für Textilien – KURIS, ZSK & MAYER – Automatischer Cutter, Lagenleger, Pressen Professionelle Textilproduktionsanlagen zu verkaufen, inklusive automatischer Zuschnittsysteme, Lagenlegemaschinen, Stickmaschinen, Industriepressen und Zubehör. Alle Maschinen wurden in der industriellen Bekleidungsfertigung eingesetzt und stehen zur Besichtigung bereit. Zusätzlich verfügbar: über 200 Näh- und Bügelmaschinen (Juki, Dürkopp Adler, Veit). Kontaktieren Sie uns für weitere Informationen. Standort: Ruse, Bulgarien Lieferbedingungen: EXW (Incoterms 2020) Alle Preise sind Nettopreise (exkl. MwSt., Demontage, Verladung und Transport). Zuschnittanlagen 1 × KURIS C3030 Automatischer Cutter KURIS automatisches CNC-Zuschnittsystem für Textilien. Zustand wie neu, stets mit Originalteilen gewartet und im Oktober 2019 installiert. Hauptdaten: Arbeitsbreite: 1700 mm Schnitthöhe: bis zu 80 mm Automatisches Servoschneidsystem Vakuumtisch Industrielle CNC-Steuerung Geeignet für Textilien und technische Gewebe Setpreis: EUR 45.000 Komplettes Lagenleger- & Zuschnitt-Set: 1 × KURIS Pionier 322352 Lagenlegemaschine 1 × KURIS Quick Lift 320919 Rollenhebemaschine 20 Meter Luftkissentisch KURIS automatischer Servocutter KURIS Bandmessermaschine Setpreis: EUR 9.000 Komplettes Lagenleger- & Zuschnitt-Set: 1 × KURIS Pionier 322352 Lagenlegemaschine 1 × KURIS Quick Lift 320919 Rollenhebemaschine 20 Meter Luftkissentisch KURIS automatischer Servocutter Setpreis: EUR 8.000 Lagenleger- & Zuschnitt-Set: 1 × KURIS Quick Lift 320919 Rollenhebemaschine 17 Meter Luftkissentisch KURIS automatischer Servocutter Setpreis: EUR 6.000 Lagenleger- & Zuschnitt-Set: 1 × KURIS Quick Lift 320919 Rollenhebemaschine 17 Meter Luftkissentisch KURIS automatischer Servocutter Setpreis: EUR 6.000 Lagentische: 1 × 10 m Lagentisch Preis: EUR 500 Kodey Tp Siopfx Alrslw 1 × 8 m Lagentisch Preis: EUR 500 Kariertes Stoffzuschneidetisch mit Prickelnadel Spezialtisch für präzises Ausrichten und Zuschneiden von Karo-/Kreppstoffen. Preis: EUR 2.500 Stickmaschinen 1 × ZSK 10-Kopf-Stickmaschine Industrielle Mehrkopfstickmaschine von ZSK. Preis: EUR 5.000 Pressen 1 × MAYER RPS-M 1000 Presse Industriepressmaschine von Mayer. Preis: EUR 8.000 1 × MAYER AHV-BM 1370 Presse Preis: EUR 4.000 1 × MAYER APM-1150 Presse Preis: EUR 4.000 Zusätzliche Informationen gerne auf Anfrage (Viber, Whatsapp) Maschinen können unter Strom besichtigt werden Fachgerechte Demontage nach Vereinbarung möglich Verladehilfe auf Wunsch verfügbar Transport kann separat organisiert werden Geeignet für Bekleidungsfabriken, Textilhersteller, Polsterbetriebe und industrielle Textilverarbeitung Alle Preise sind Nettopreise (exkl. MwSt., Demontage, Verladung und Transport) Kontakt: G. Jordanov Standort: Ruse, Bulgarien

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, veikimo valandos: 600 h, Lectra Q25 pjovimo staklė, 2018 metų, maksimalus pjovimo storis 2,5 cm, naudinga plotis 170 cm, dirbtų valandų: 600. Staklė puikios būklės. Klsdpfx Aeycp Syslrow

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, veikimo valandos: 900 h, Pjovimo staklės Lectra IQ80, 2018 metų, maksimalus pjovimo storis 8 cm, naudingoji plotis 180 cm, 900 darbo valandų. Staklės puikios būklės. Kledpfjycqctex Alrew

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, bendras plotis: 1 800 mm, bendras ilgis: 5 000 mm, 1x CNC PJOVIMO STAKLĖS CT-163MB V2 Kjdpfxoywzkxs Alrjlw Efektyvus darbinis plotis 1650 mm, pjovimo lango ilgis 4500 mm, bendras ilgis apie 6000 mm. Konstrukcija: stacionarios pjovimo staklės su X ir Y krypčių linijiniais bėgiais, skirtiems dideliam masės pagreičiui. OMRON bešepetėliniai sukimo momento servovarikliai. Operacinė sistema Windows 7 Ultimate. 1 Klojimo mašina Ranka paduodamas padavimo vežimėlis. Įskaitant krašto kontrolę ir automatizavimą. Pjovimo staklės maitinimas per servovariklio valdymą, surinkimas atliekamas ant CNC pjovimo staklės.