Klijų dengimo mašina SANDĖLYJE

OSAMA WALCE KLEJOWE 1300 NOWE

Būklė: naujas, Gamybos metai: 2025, darbinis plotis 1300 mm rankinis elementų aukščio reguliavimas klijų dozės reguliavimas CE ženklinimas audojimo saugos jungiklis Ksdpfx Afjxf Ef Hj Hjdr maitinimas 380V visiškai naujas 2025

Būklė: naujas, Gamybos metai: 2024, Osama Automatic 4-Roller Glue Application Machine Model: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. material passage height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Application roller diameter: 250 mm Motor power: 3 kW Electrical connection: 400 V / 50 Hz / 3-phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea formaldehyde (UF), and polyurethane adhesives, suitable for various material types such as MDF, multiplex, chipboard, composite panels, and gypsum plasterboards. This type of glue application machine allows precise and homogeneous dosing of adhesive, taking into account the roller profile, which must suit the production requirements. The heavy-duty frame and the core of the rollers—which are manufactured thicker than previous models—allow for a high production rate without special issues, enabling bonding of workpieces up to 2,200 mm in width. Roller removal for maintenance is straightforward due to the support system, which can be split in half via a simple bayonet coupling. The machine can be optionally equipped with various accessories such as an electronic speed controller, automatic roller cleaning device, and automatic upper roller lifting system with digital position display. The S4R/P glue application machine is suitable for various production purposes, including in the construction sector and for manufacturing foam panels and mattresses. Features: - Automatic roller cleaning system - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400 x 3000 mm with PVC rollers, 60 mm diameter, 200 mm spacing - Outfeed table TDF 1400 x 3000 mm, disc rollers, Ø 122 mm, stainless steel Location: Available ex-stock 54634 Bitburg Kedpfxeu I R Ute Af Hedr - Immediately available -

Būklė: naujas, Gamybos metai: 2024, Surface Planer Martin T 54 Only with a high-quality surface planer can you truly achieve perfect foundations. The T 54 was developed with precisely this aim in mind. It enables you to dress workpieces easily at the most modern level and safely machine them with four-sided edges. The machine comes standard with a TERSA all-steel cutterblock. The Xplane cutterblock with a pulling cut is available as an optional extra. Chamfering is effortless thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The solid cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require more support area, both the infeed and outfeed tables can each be extended by 380 mm – of course, these extensions are also made of cast iron. Technical data: Table width: 500 mm Table length: 2840 mm Max. cutting depth: 8 mm Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorised table adjustment Kdsdspgkmwjpfx Af Hor Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa cutterblock 4 knives Location: In stock at 54634 Bitburg - Available immediately -

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with XPLANE Cutterhead The T45 thickness planer provides ideal prerequisites for modern production: It delivers superbly planed surfaces, is quick and simple to operate, and also runs exceptionally quietly. The standard electronic control allows you to store up to 99 planing heights, making setting the planing height so easy that the first workpiece already fits perfectly. Of course, the thickness table can be adjusted with a simple push of a button or incrementally in 0.1 mm steps. The controls for feed adjustment are conveniently positioned within easy reach. The heavy, vibration-damping composite frame combined with the high-quality cutterhead bearings guarantee outstanding surface finishes. Thanks to its sound-absorbing design, quiet operation is standard even in the basic version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing height, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual rapid and fine adjustment of thickness via digital display, pushbuttons for cutterhead start and stop, integrated operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 spiral knife rows (33 convex carbide knives per row), supplied with full knife set and one T-key Torx T20; spindle speed 6,000 rpm included; The emission sound pressure level LpA during operation is reduced by 10 dB(A). • Thickness table: Electronic adjustment with fine setting, travel speed 10 mm/s, supported by 4 anti-tilt spindles, finely planed table surface • Infeed: 2 speeds, 6 / 12 m/min, electronically selectable even during planing; large rubber feed rollers Ø 85 mm for compensating variable timber thickness, gentle and self-cleaning rubber rollers, simple roller swap; sectional pressure bar at infeed • Extraction: Highly pivotable divided extraction hood with 160 mm chip extraction port, can be connected left/right (both sides possible in special cases); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 knife change tool 1 pair of dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workstation LpA acc. to DIN EN ISO 11202 [dB(A)] Kjdpfjqlck Nox Af Hjdr No-load noise (no extraction) P1 65 No-load noise (with extraction) P1 77 Working noise (no extraction) P2 65 Working noise (with extraction) P2 78 Sound power level LWA acc. to DIN EN ISO 3746 [dB(A)] No-load noise (no extraction) 84 Working noise (with extraction) 90 Dust emission: Low-dust operation according to DGUV 209-044 / BGI 739-1 Location: ex-stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm Kdjdpfx Ajqlckpof Her • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Gamybos metai: 2006, būklė: geras (naudotas), Glue Application Machine FIN SC2R/1300 with 2 rollers Model: SC2R-1300 Year of manufacture: 2006 Manufacturer: FIN s.r.l., Italy Key technical specifications: Working width: 1300 mm Maximum clearance between rollers: 120 mm Roller diameter: 185 mm Feed speed: 19 m/min Net weight: 390 kg Kdjdpfx Asfguntef Her Overall dimensions: 64 x 210 x 136 cm Overall dimensions with crate: 73 x 200 x 153 cm 400 V, 50 Hz, 0.37 kW Precise and uniform application with any type of adhesive, excellent technical characteristics, in addition to outstanding practical usability, functionality, and operator safety, place this unit at the forefront of 2-roller glue application machines. Spreader roller covered with acid-resistant rubber, ground and grooved, highly durable; thanks to a rational rubber coating, it is possible to perform 6-7 regrinds. It is quick and easy to disassemble. Application, precise and even, on one or both sides of boards. Special shock absorbers on the roller supports allow for automatic roller opening; depth setting enables application to boards of different thicknesses within 5 mm. They also compensate for any panel parallelism deviations. Consistent glue metering by means of a rectified distributor trough, made of sheet metal, allowing very rapid removal for cleaning purposes. Drip tray for glue and wash water, made of galvanized sheet steel, extendable for easy cleaning. Safety guards of sheet metal on rollers and glue distributor trough—the cover prevents objects over 5 mm thick beyond the preset gap from being inserted between the rollers, ensuring maximum operator safety. Electrical installation in a waterproof box with fuses and thermal protection for motor and transformer. Control panel with start button, stop button and indicator light (24 V). Roller rotation by chain with self-adjusting tensioner sprocket. Roller washing system with a perforated wash tube for water supply during the cleaning process.

Būklė: naudotas, Gamybos metai: 2018, 1 unit CNC-controlled drilling, gluing and dowel inserting machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz, complete in standard configuration with: - Linear guide support consisting of: 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. reinforced blow-out, gluing and dowel inserting station for 8 mm diameter dowels, dowel length 30 mm - Fully automatic, electronically controlled centralized lubrication - X-axis NC controlled, with working length 1,300 mm, max. travel speed 78 m/min - Z-axis, position programmable over support table 5-40 mm, with option for NC-controlled Z-axis - Dowel insertion projection 7-20 mm, programmable with option of NC-controlled Y-axis Drilling depth from 0-35 mm (with drill length total 70 mm) is automatically set with dowel protrusion - Enclosed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 liters of water - Indicator lamp for glue level in glue container - 1 pc. side fence left, 1 pc. side fence right, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10°, for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection diameter 80 mm - 1 pc. TCT control with: integrated industrial PC, incl. Beckhoff TWINCAT Soft PLC, operating temperature range 0-50°C, 15" resistive TFT industrial touchscreen display, 1024 x 768 resolution, 2 GHz CPU, 256 MB RAM, 2x network interfaces, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with absolute, relative, or grid dimensioning, automatic workpiece mirroring and process optimization, 4 work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point shifting, programmable job lists, plain text error diagnosis OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional vertical angled clamping cylinders 10° with bracket (total 8 clamping cylinders) - Surcharge for machine bed length 1,800 mm with working length 1,800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm (Standard working length not reduced) - 1 NC-controlled Y-axis, with ballscrew and dynamic travel speed 300 mm/sec. Via software, programmable dowel insertion projection 7-30 mm and drilling depth 0-42 mm (with drill length total 77 mm) for vertical drilling unit from above, Y-axis position 5-42 mm - Surcharge for NC-controlled Y-axis position 5-62 mm instead of 5-42 mm - Surcharge for: 1 vertical drilling unit from above, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm, Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K Kdodpfxexwaz Ho Af Hjr

Būklė: naudotas, mašinos/transporto priemonės numeris: 006290, Max. working width: 1300 mm Max. working height: 100 mm Number of rollers: 2 Ksdpfx Aeu A Evhof Hjdr

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, mašinos/transporto priemonės numeris: V 455228, Funkcionalumas: visiškai funkcionalus, obliavimo plotis: 500 mm, pjovimo ilgis (maks.): 3 300 mm, pjovimo plotis ties tiesiniu vedliu: 1 650 mm, Aukščiausios klasės obliavimo staklės Kodpsyakqlsfx Af Hjdr Supakuota ir paruošta išsiuntimui!

Būklė: naudotas, mašinos/transporto priemonės numeris: 007676, Pozicija 1: Šepečių mašina BARBERAN-ECO-1700-H-SI Kdsdpfowuzzrox Af Her Pozicija 2: Linų uždėjimo mašina BARBERAN-ECO-1700-H-SI Pozicija 3: Praeinamoji presas BARBERAN-ECO-1700-H-SI Pozicija 4: Praeinamoji presas BARBERAN-ECO-1700-H-SI