Storio obliavimo staklės OPTIMAT TYTAN G630

OPTIMAT TYTAN G630

Būklė: naujas, Saw blade diameter 420 x Ø 40 mm Cutting diameter 170 mm Cutting length 410 mm Saw blade dimensions 420x3.2/2.4x40 mm Speed 3,500 rpm Extraction port diameter 100 mm Total power requirement 3.0 kW Machine weight approx. 120 kg Space requirement approx. 1300 x 800 x 1600 mm - Crosscut and mitre circular saw for cross-cutting operations * Drive motor 3.0 kW - 400 Volt - Double-sided mitre adjustment (60° / 45°), with fixed stop - Compound cut double-sided 45°, with fixed stop - Robust cast iron construction - Precision ball bushing guidance of the tool carriage on hardened and ground steel shafts Duedpfx Aexabztsc Der - Manual saw feed - Infinitely variable saw blade height adjustment - Port for optional extraction Cutting data: - Cutting length at 90° = 410 mm - Cutting height at 90° = 170 mm - Cutting length at 45° = 290 mm - Cutting height at 45° = 115 mm Special accessories included: - Compound cut adjustment via handwheel, adjustable on both sides (45°/45°) - Carbide-tipped circular saw blade 420x3.2/2.6x40 mm * Z = 108 FTZ negative for aluminium and plastic - Infinitely adjustable hydraulic feed brake - Pneumatic material clamping from above, consisting of: * 2 vertical clamping cylinders, adjustable, with manual lever valve - 1x machine stand - upgraded drive motor (3.0 kW)

Būklė: naujas, Gamybos metai: 2026, Technical data: • Extraction capacity ~ 5200 m³/h • Motor power 3.0 kW • Speed 3000 min⁻¹ • Voltage 400 V, 50 Hz • Extraction connection 250/200 mm • Filter area 13.7 m² • Air velocity 28 m/sec • Number of filters 28 • Dimensions 752 x 1982 x 2144 mm • Weight 300 kg • Filter category G • Filter material Polyester • Noise level 80 dB (without connection), 65 dB (when connected to the machine via a duct) Scope of delivery: • Complies with H-2 standard • Polyester filters, 5 microns • 2 containers • Undercarriage • Filter cleaning with vibration system and control unit Djdpod H Rf Tjfx Ac Dsur + €850 for models with fire extinguisher (Safe System)

Būklė: naujas, Technical data: Working width: 1100 mm Dodpfx Asgtm U Aoc Dour Sanding belt dimensions: 1120x2150 mm Maximum working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Sanding belt speed: 16/18 m/s Feed motor power: 0.55 kW Variable feed belt speed: 4-20 m/min Work table motor power: 0.25 kW Pneumatic shoe, lift/lower function: YES

Būklė: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG Dedpsrigxyjfx Ac Dsur - Machine length: 415 cm - Machine inspected and in original condition

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced milling unit anchored to the worktable Especially sturdy design Smooth operation due to precision assemblies and high own weight Standard with forward/reverse rotation and electronic interlock during direction change 5 speeds from 3000 to 10000 rpm Speed adjustment is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large cast iron worktable for lasting precision Easy handling thanks to controls and speed indicator on the machine front Milling fence with fine adjustment and aluminium fence jaws as standard High-performance industrial motors Equipment details: Milling fence Milling fence adjustable with crank/handwheel from the front panel With digital readout Quick-change spindle MK 4 quick-change spindle system standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved milling guard Forward/reverse spindle rotation MK 4 quick-change spindle Milling fence adjustable with crank/handwheel from the front panel with digital readout Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data Worktable dimensions: 2500 x 810 mm Dodpfxedqzcxj Ac Deur Spindle tilting range: +45 to -45 degrees Usable spindle length Ø 30-35 mm: 140 mm Usable spindle length Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool diameter for profiling: 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle diameter at fence: 1 x 120 mm Extraction nozzle diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Available immediately -

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 230 V, obliavimo plotis: 330 mm, sukimosi greitis (maks.): 9 000 aps./min, bendras plotis: 615 mm, bendras aukštis: 555 mm, bendras ilgis: 850 mm, drožlių pašalinimas: 3 mm, aukščio reguliavimo tipas: mechaninis, padavimo velenėlių skaičius: 1, obliavimo peilių skaičius: 36, obliavimo aukštis: 156 mm, PS33 with Spiral Cutterhead • Innovative design and powerful motor. • Material removal up to 3.2 mm. • Infeed & outfeed tables. • Double-knife cutterhead with double-sided knives. • Front-mounted indicator shows material removal. • Planer head with reversible knives. • No dust extraction system required thanks to integrated fan for chip evacuation from the cutterhead. • Depth stop with seven positions for repeat thickness planing at the same height. • Maximum workpiece width up to 330 mm. • Model: PS33 • Recommended use: Tradesmen/Professionals • Input power (230 V): 1.8 kW • Cutterhead speed: 9,000 rpm • Cutterhead diameter: 46 mm • Number of indexable inserts in cutterhead: 36 • Insert size: 15 x 15 x 2.5 mm, R=150 Dodpsvncu Iefx Ac Dour • Feed rate: 7.9 m/min • Max. depth of cut: 3.2 mm • Max. planing width: 330 mm • Max. planing height: 156 mm • Min. workpiece length: 120 mm • Extraction: Integrated fan, 62-mm extraction port or dust bag • Sound level: 96 dB • Machine dimensions (L x W x H): 340 x 615 x 555 mm • Dimensions with tables extended (L x W x H): 850 x 615 x 555 mm • Machine weight: 35 kg • Packaging dimensions (L x W x H): 415 x 660 x 545 mm • Package weight: 39 kg Included in delivery: • 36 carbide indexable inserts (pre-installed in cutterhead) • 5 spare carbide inserts and screws • Dust bag for chips and dust • Connection kit for dust bag • Torx key (TX25) for changing inserts

Būklė: naujas, Gamybos metai: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade Dusdpfxji Dfide Ac Dsr The machine tilts via handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta switch Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to one side to approx. 25° for sharp angles, and tilted flat to the left up to 30° Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2026, A550 Pilarka Do Drewna Litego, W pełni Automatyczna, 9 m W pełni automatyczne cięcie drewna średniej i dużej wielkości dzięki prostemu w obsłudze systemowi automatyzacji. Umieść dowolny element drewna, a maszyna automatycznie wykryje go i przytnie zgodnie ze zleconymi wymiarami, z użyciem napędu serwo zapewniającego precyzyjne pozycjonowanie materiału. Import list zleceń poprzez WIFI usprawnia szybkie wprowadzanie dużych zleceń cięć z plików Excel. Opcjonalnie pilarka A550 może być wyposażona w funkcję optymalizera. Każdy kawałek drewna, który zostanie położony na podajniku, niezależnie od jego długości, jest automatycznie mierzony przez czujnik laserowy. Zaawansowany algorytm optymalizujący analizuje listę cięć i wyznacza najlepszy porządek wycinania elementów, tak aby maksymalnie ograniczyć odpady. Wszystko to odbywa się w czasie rzeczywistym, podczas pracy maszyny, bez dodatkowych działań operatora. • W pełni automatyczna praca – automatyczne podawanie drewna i cięcie na zadane długości. • Intuicyjny interfejs użytkownika; szybkie wprowadzanie zleceń i rozpoczęcie cięcia. • Obsługa prostych elementów, całych partii oraz dużych list cięć z plików Excel. • Możliwość cięcia i zliczania kilku sztang/bel jednocześnie. • Zdalne wprowadzanie zleceń (Excel) przez WIFI z rozbudowanymi opcjami mapowania danych. • Regulowana prędkość podawania drewna i cięcia dla maksymalnej wydajności procesu. • Automatyczny druk etykiet dla elementów na podstawie danych ze zlecenia (naklejanie ręczne, opcjonalnie). • Bezpośredni druk na materiale w linii produkcyjnej, bez udziału operatora (opcja). Dodpof Ekngefx Ac Deur • Obsługa kodów kreskowych/QR do wprowadzania zleceń lub ich drukowania (opcja). • Automatyczne ustawianie kąta cięcia piły w zakresie ±75° za pomocą serwomechanizmu (opcja). Idealna do zastosowań: • Produkcja konstrukcji ramowych i dachowych • Produkcja domków i schowków ogrodowych • Produkcja mebli z litego drewna • Produkcja elementów ciesielskich z cięciem pod kątem • Cięcie dużych ilości drewna Model: A550 Długość całkowita: 9 m Długość obrabianego materiału: 8580 mm Wydajność załadunku/popychania: 20 – 40 kg Oprogramowanie: Optymalizator AUSTRALIJSKIE MASZYNY NAJWYŻSZEJ JAKOŚCI.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, SCHORR Log Splitter HS-22PE PRO – 22 Tons Splitting Force -- 22 t Splitting Force – effortlessly splitting hardwood and thick logs -- Heavy-duty construction (340 kg) – robust hydraulics and sturdy steel frame -- Dual power source: PTO and 400V electric motor – flexible for use in the field or on the yard -- Splitting length up to 110 cm – ideal for long log sections -- Practical log lifter – combines lifting heavy logs and a protective guard -- Lowerable cylinder (1.99 m) – easy transport and space-saving storage -- 3-point linkage (Cat. I & II) – transport directly with your tractor -- Two-handed operation and safety features – maximum operational safety -- Mobile thanks to wheels and transport wheel Performance and Flexibility The HS-22PE impresses with powerful hydraulics and reliable continuous operation. Thanks to the PTO and 400V electric motor, you can choose: mobile operation with the tractor or quiet, emission-free use at the yard. Comfort and Efficiency -- Log lifter for heavy timber – eliminates strenuous manual work -- Automatic or manual return stroke for faster or more precise operation -- Two speeds – quick approach, powerful splitting Robust Construction Built with high-strength steel, durable hydraulic components, and stable footing, the HS-22PE is designed for tough conditions. The large transport wheels make it easy to move, even on uneven ground. Technical Data Manufacturer (short name): SCHORR -- Manufacturer model: HS-22PE -- Splitting force: 22 tons -- Weight: 340 kg -- Drive: Electric (400V 5.5 kW, 16A) or PTO (540 rpm) Basic Dimensions -- Overall length: 1300 mm -- Overall width: 1450 mm -- Overall height: 2470 mm -- Hydraulic cylinder diameter: 11.5 cm -- Piston rod diameter: 6 cm -- Splitting wedge length: 22 cm -- Max. / min. splitting diameter: 40 cm / 8 cm Duodsw Smphepfx Ac Der -- Distance between wedge & ground: 16 cm Speed -- Cylinder speed PTO: Forward 5.5 s / Return 9.5 s -- Cylinder speed electric motor: Forward 7.5 s / Return 14.5 s Service and Delivery -- Spare parts always in stock -- Delivery or collection in 48465 Schüttorf possible (by appointment only) -- Financing and leasing available on request We are happy to provide personal consultation regarding the SCHORR HS-22PE PRO.

Būklė: naujas, Gamybos metai: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with forward and reverse rotation Large, cast-iron milling unit mounted directly to the table Under-table extraction hood for improved dust extraction Solid and precise cast iron table Fast and straightforward speed change Powerful 5.0 kW motor Standard curved milling guard Quality made in Italy Dedpfxehp Rcrj Ac Djur Equipment Details Cast iron milling unit Directly mounted onto the milling table Milling spindle mounted with high-precision ball bearings in the upper position for minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful Motors Equipped with a high-performance three-phase motor Milling Guard The standard milling guard is supplied as standard for maximum safety, featuring a height-adjustable fence and protective cover. Milling Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw The integrated extraction port ensures an unobstructed view Milling Table Opening A large table opening allows the use of larger panel cutters, tenoning, and slotting tools above and below the table Curved Milling Guard Included as standard Reversible Fence Jaws Versatile, integrated fence to bridge the tool gap enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and Weight Weight (net) approx. 240 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation Information Required length: 1,945 mm Machine body width/depth: 575 mm Required width/depth: 920 mm Working area length: 1,600 mm Explanation required space: The dimensions take into account the maximum travel distances or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Explanation working area: Please add the specified dimensions to the required space to calculate the recommended free setup area for the machine. Electrical Data Supply voltage: 400 V Drive motor power: 5.0 kW Mains frequency: 50 Hz Milling Spindle Usable spindle length: 100 mm Spindle speeds: 3,500/7,000/10,000 rpm Max. spindle protrusion above table: 130 mm Spindle shaft diameter: 30 mm Max. milling tool diameter Max. sinkable tool diameter: 180 mm SCOPE OF DELIVERY Curved milling guard Aluminium fence jaws Table extension left and right Extendable workpiece support