Vertikali juostų rišimo mašina visiškai automatinė

OMS OMS08RP-TR1400

Sąlyga: naudotas, Gamybos metai: 2006, Gamintojas: Weinig Modelis: Unimat Super 4 Pagaminimo metai: 2006 Keturių pusių obliavimo staklės Gamintojas: WEINIG, restauruotos Modelis: UNIMAT SUPER 4 su trumpų ruošinių mechanizacija EM15 - Pagaminimo metai: 2006 Techninės specifikacijos - Darbinis plotis: maks. 150 mm - Darbinis plotis: min. 25 mm - Darbinis aukštis: maks. 50 mm - Darbinis aukštis: min. 15 mm - Velenų skaičius: 3 - Viršutinio veleno galia: 22 kW - Apatinio veleno galia: 11 kW - Velenų apsisukimų skaičius: maks. 7.000 aps./min - Veleno skersmuo: 40 mm - Stalo ilgis: 2.000 mm - Maks. padavimo greitis: 24 m/min - Nuolatinis padavimo greičio reguliavimas Dwodpfx Aoqprk Tedmjf - Atskiras variklis kiekvienam velenui - Padavimo volas su kardanine pavara - Padavimas iš žurnalo - Motorizuotas obliavimo aukščio reguliavimas - Automatinė tepimo pompa - WEINIG veidinio frezavimo galvutė - WEINIG EM 15 - Bendra galia: 45 kW

Sąlyga: labai geros būklės (naudotas), ROLLER COATING MACHINE (REVERSE) Max. working width: 1300 mm Total machine length approx.: 1600 mm Dsdpfx Adsidqwpomewf Integrated control cabinet with operator panel Driven conveyor carpet for workpiece feed (with servo controller, rated power 0.75 kW) Feed speed: 6 m/min to 24 m/min Total connected load approx.: 4.1 kW Equipped with 2 working units: * 1st unit (with 2 rollers): Dosing roller made of chrome steel, diameter 174 mm + application roller with rubber coating, diameter 248 mm, both with individual speed controllers (power 0.37 kW + 0.75 kW), including rubber-coated counter roller underneath * 2nd unit (with 2 rollers): Dosing roller made of chrome steel, diameter 174 mm + application roller with rubber coating, diameter 248 mm, both with individual speed controllers (power 0.37 kW + 0.75 kW), including rubber-coated counter roller underneath

Sąlyga: naudotas, Gamybos metai: 1997, Nadrowski turbina elektros gamybai iš perkaitusių garų, pagaminimo metai 1997, maksimali garų temperatūra 420°C, darbinis slėgis 1,5–40 bar, maksimali galia 2067 kW, reguliariai prižiūrėta. Dwjdevytfuepfx Admsf

Gamybos metai: 1993, Sąlyga: paruoštas naudoti (naudotas), Vertical Turning Center Dörries Scharmann Model: VCE 2000/160 Pallet size: 1,600 mm Pallet load capacity: max. 8,000 kg Number of pallets: 13 units Table indexing: C-axis 0.001° Table cross travel (X): 2,300 mm Column longitudinal travel (Z): 1,500 mm Crossbeam positions: 9 steps of 100 mm Feed rate X/Y/Z: 1 – 6,000 mm/min Rapid traverse X/Y/Z: 8 m/min Max. turning diameter: 2,000 mm Max. workpiece height: 1,500 mm Main Spindle Spindle drive motor: 69 kW Spindle speed: 2.8 – 315 rpm ATC for turning: 59 positions - System 240.2 Live spindle – SK50 Spindle drive motor: 30 kW Spindle speed: 10 – 1,500 rpm ATC for SK50: 61 positions CNC control: Siemens Sinumerik 880M Accessories: - FMS with 13 pallets - 2 rotary loading stations - Coolant unit with filtration system - Coolant through spindle Dwsdpfsguk S Sox Admef Machine weight: Approx. 40 t Year of manufacture: 1993 (See also further offers from this seller)

Sąlyga: paruoštas naudoti (naudotas), Gebruikte blikproductielijn voor de vervaardiging van blikken met een diameter van 73 mm of 99 mm. Er zijn diverse samenstellingen van machines beschikbaar. Bestaande uit: - Krupp Sdvt duplex snijmachine - Soudronic FBB400 lasmachine - Soudronic intern poedercoatingsysteem - Extern lakkeringssysteem - Frei uithardingsoven - Metalbox 65d spinflansapparaat - FMI A304 profileringseenheid - FMC 652 sluitsysteem Dwodpevy Tyxofx Admsf

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 12599, Rotor diameter: 600 mm Dodpfx Ajk N Iy Nedmjwf Rotor width: 1,450 mm 12-knife rotor 3 rows of stationary knives Feed opening approx. 780 x 1,490 mm Drive motor: 132 kW

Gamybos metai: 1985, Sąlyga: geras (naudotas), COMPLETE PAINTING LINE WITH THE FOLLOWING STATIONS: 1. COATER FOR WATER-BASED PRIMER 2. OVEN WITH UV + IR LAMPS 3. DOUBLE COATER WITH REVERSE SYSTEM 4. UV LAMPS 5. DOUBLE COATER 6. UV LAMPS 7. DMC SANDER 8. CONVEYOR 9. SORBINI TOUCH-UP STAIN COATER 10. IR LAMPS Dwodpfxjk Scufo Admef 11. FINISHING ROLLER 12. UV LAMPS 13. OUTFEED CONVEYOR

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, For sale: ERLENBACH ESA 5 cutting line with VIRO packer, model PPZA-1300/6 - Year of manufacture: - Erlenbach ESA 5 - 2013 - VIRO model PPZA-1300/6 - 2011 - Used for less than a month - Maximum block dimensions (L x W x H): 5100 x 1260 x 1260 mm - Horizontal cutting: up to 61 oscillating wires - Vertical cutting: up to 11 wires - Cutting speed: 1.5 m/min - Automatic wire positioning Dwsdpfx Aov Hm A Todmsf - Scrap grinding system (top, bottom, sides)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Used Bottling Line | Used Beverage Line | Soft Drinks NP 602 | PET BOTTLING LINE – 12,000 BPH Speed: 12,000 Bph Blow Moulder: SIPA Year: 2009 Number of cavities: 8 Preform Elevator Dwsdpfx Ajtqfcgedmsf Preform Orientator Chiller Formats: 0.5 L - 1 L - 1.5 L Monobloc: TETRA PLAST RFA-40 Year: 1995 Filling type: Aseptic Cap type: 38mm pre-threaded plastic Cap Elevator Dryer: EUROPOOL Year: 2007 Type: Air-knife Labeller: KRONES Type: Roll-feed Sleeving Machine: CLEVER 2019 With steam tunnel Bottle Rejection System Dryer: FMT Year: 2011 Type: Air-knife Shrink-wrapper: SMI Year: 2009 Handle Applicator: TWIN PACK Year: 2000

Gamybos metai: 1983, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Dsdpfx Adsd Nb A Njmowf Tensile force: 16,000 kg Broaching length: 1250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Holder diameter for pull heads: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically adjustable steplessly from 1 m/min up to max. 10 m/min Return speed: hydraulically adjustable steplessly from 5 to max. 25 m/min Machine footprint (W x D x H): approx. 5500 x 2800 x 4900 mm (from pit base) Power supply / Connected load: 380 Volt, 50 Hz / 22 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated pull heads DIN 1417/18 to lock the broaching tools in the pull bridge. The needle lifting heads in the tool loader are hydraulically locked. The machine features a coolant system with integrated magnetic band chip conveyor for installation in a pit. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in series production; for optimal utilization, a foundation (pit) is ideally required. Pull heads and needle lifters are available on request. The machine can be inspected at our warehouse.