Briketavimo presas

muetek MAP 1200

Refurbished Used Machine
Base machine price from: €147,700 net
*Options available at extra cost, see below

with full 1-year warranty
Delivery approx. 16 weeks after order

Technical data:
Throughput capacity up to 1200 kg/h (material dependent)
(e.g. sawdust with a bulk density of 180 kg/m³)
Briquette diameter: 75 mm
including 2 m press channel
Main motor power: 45 kW
Feed screw geared motor: 2 x 2.2 kW
Compressor screw: 2 x 5.5 kW
Distributor screw: 2.2 kW
Hydraulic pump motor: 0.37 kW
Total connected load: 65 kW
Control panel with plain text display for operational status
and load indicator for main drive and feed screws
PLC control Siemens S7/300 with operating hours counter in the control cabinet
Machine bears CE marking
Automatic start/stop function
Dimensions: 3100 x 860 x 1800 mm (L x W x H)
Weight: 4500 kg

Options:

Silo for MAP series (only suitable for MAP 1200 press)
- Storage silo above the machine -
Capacity approx. 6 m³, sturdy steel construction with agitator discharge and fill level sensor.
€19,700 net plus VAT

-Temperature control unit for press tools
Fgjdps E Dqujfx Acuoh
For maintaining the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, and pressure switch. Fully wired and ready to operate – essential for operation
including corresponding control system
€7,850 net

-Guillotine, for cutting briquettes to length
Compressed air connection required onsite
€6,940 net plus VAT

-Transport duct / cooling section (nominal: 4 x 2 m)
per 2 meters: €990 net

Assembly / Commissioning (nominal per press approx. 2-3 days onsite)
Billed according to actual effort, at the following rates:
Service technician/mechatronics engineer per installation & travel hour: €129.00
Overtime: +25% surcharge
Each Saturday & night hour: +50% surcharge
Each Sunday & public holiday hour: +100% surcharge
Travel expenses per technician per day: country-dependent
Per car/transporter & km: €0.98/km
Travel and accommodation on submission of receipts or flat rate at the client’s expense.

Test with customer’s own material: (by arrangement, up to max. 750 kg) – flat rate €1,970 net

---

Raw material requirements:
- Moisture content (oven-dry basis) must be at least 6% and max. 18%
- Maximum chip length 20 mm
- Installation temperature: heated room with at least +5°C
- Feed must be free from metals and mineral contaminants. Damage to die tools and/or increased wear may otherwise occur.

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.