Yag Lazeris pirkti naudotą (1 333)

Sąlyga: labai geros būklės (naudotas), Eos EOSINT Plastic Laser Sintering System Here we are offering an Eos EOSINT Plastic Laser Sintering System. Eos EOSINT Plastic Laser Sintering System P385 The following items are included with the EOS P385 system: Build chamber container Powder container Chiller: Termo TEK Termochiller 1100 The following upgrades have already been completed: Software: CDs Eosint P3 Process Software PSW 3.2 for Windows 2000, XP Materialise: Magics RP 9.0 Machine upgrade from P360 to P385 on 10.08.2007 Laser replacement on 15.05.2008 X-axis drive motor: replacement with used motor on 04.05.2020 Pyrometer replacement on 30.06.2020 Build size: 350mm x 350mm x 610mm Voltage: 3/N/PE/400V, Frequency: 50 Hz Connected load: 8 kW, Fuse protection: 32 A Max. laser power: 100 W, Laser class (open): 4 Laser class (closed): 1 Ijdpfxef Ey Eae Af Istb Weight: 850 kg Type: EOSINT Upgrade P385 Condition: used Scope of delivery: (See picture) (Subject to technical modifications and errors in the provided information!) If you have further questions, we are happy to answer them by phone.

Sąlyga: geras (naudotas), Here we offer a laser beam source from Coherent mti PC. Itsdsdmzhqjpfx Af Ijb Model: AVIA 355-X Operating hours: Diodes 1975/1975, Head 26488 Wavelength: 355nm Excitation: diode-pumped Laser type: Nd:YAG laser Laser type 2: THG, Q-Switch Operating mode: pulsed Laser power: 10 W at 60 kHz Beam divergence:

Sąlyga: labai geros būklės (naudotas), Trumpf Model: TruPulse 44 Trumpf laser unit with laser light cable and KLH chiller Laser unit: TruPulse 44 Electrical output at nominal laser power at the workpiece: 2.0 kW Power: 2.0 kVA Current at 230 V: 9.0 A Itjdpov Hnz Dofx Af Ieb Consumption data: Maximum power consumption (e.g. in service mode) Electrical output at nominal laser power at the workpiece: 2.5 kW Power: 2.5 kVA Current at 230 V: 11.0 A Mains configuration: Electrical connection values: Supply voltage: 220 V (-10%) ... 240 V (+10%) 50 Hz (-3 Hz) ... 60 Hz (+3 Hz) At nominal power (total power factor): 0.88 Insulation resistance: 400 kOhm Main fuse: 16 A Laser unit dimensions: Width 485 mm, Depth 800 mm, Height 700 mm Laser unit weight: 1.5 kN (150 kg), distributed over 4 swivel castors Chiller: KLH Kältetechnik UC3.K2W. MT-00-TLS Refrigerant: R134a / GWP 1430 Tank: 1.80 kg Supply: 3 x 400 V Frequency: 50 Hz Rated current: 4.5 A Connected load: 1.8 kW Dimensions: Length 650 mm, Depth 650 mm, Height 1100 mm Weight: 190 kg Total weight: 340 kg Scope of delivery: (see image) (Technical data subject to change and error!) For additional questions, we would be happy to assist you by phone.

Sąlyga: naudotas, Trumpf Type: TruDisk 4002 / W20.HL29 Laser Beam Source Trumpf TruDisk 4002 with KLH Chiller The Trumpf TruDisk 4002 laser source is an industrial disk laser from TRUMPF, known for its high power, excellent beam quality, and efficiency. It is commonly used for welding, cutting, and other material processing applications. Maintenance has been carried out regularly. Isdpfx Afswh Rnzj Ijtb The unit consists of the laser source with the associated chiller, but is supplied without optics and fiber optic cable. Technical Data Laser Power: 4,000 watts (4 kW) (minimum 80 W) Wavelength: ~1030 nm (infrared range) (Yb:YAG) Beam Quality (BPP): typically ≤ 8 mm·mrad Fiber Connection: TruDisk lasers usually feature multiple fiber connections Cooling: Water-cooled – via a KLH chiller Dimensions: 1.0 x 2.0 x H1.6 m (laser) + 1.0 x 1.5 x 1.8 m (chiller) 380 V -10% ... 460 V +10%, 3-phase AC + PE 23 kW / 25 kVA - 34 A / 400 V 50 ... 60 Hz KLH Chiller: The KLH chiller is an industrial liquid chiller designed for dissipating heat from high-power laser systems such as the TruDisk 4002. Key features: - Water-to-water cooling - Precise temperature control (typically 20–25 °C) - Refrigerant: R 404A - Can be controlled via TRUMPF interface - Essential for maintaining laser specifications Device type: W20.HL29 Weight: 850 kg (laser) + approx. 550 kg (chiller) Condition: used Scope of delivery: (see photo) (Specifications are subject to change and errors excepted!) We are happy to answer further questions by phone.

Sąlyga: naudotas, SLM Solutions Model: SLM 500 Build volume (L x W x H): 500 x 280 x 365 mm (minus substrate plate height) 3D optics configuration: Quad (4x 700 W) Build rate: up to 345 cm³/h Layer thickness (variable): 20 µm - 90 µm Min. feature size: 150 µm Focus diameter: 80 µm - 115 µm Max. scan speed: 10 m/s Average shielding gas consumption during build process: 16 l/min (argon) Average shielding gas consumption during flooding process: 250 l/min (argon) Powder capacity: 90 kg Electrical connection / power requirement: 400 Volt 3NPE, 63 A, 50/60 Hz, 8-5.5 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 6080 mm x 2530 mm x 2620 mm Machine weight (without / including powder): kg, kg with powder Was operated with Aluminium AlSi10Mg! Laser operating hours: 1689 h Condition: used Scope of delivery: (See image) (Specifications subject to change and errors excepted!) Itjdpfx Ajv Iff Njf Ieb For further questions, we will be happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer a laser beam source from Coherent. Model: AVIA 355-X Operating hours: Diodes 43,022/43,022, Head 42,955 Crystal Shifter: 1,845.91 hours Wavelength: 355 nm Excitation: diode-pumped Itjdpfxjihp Are Af Iob Laser type: Nd:YAG laser Laser type 2: THG, Q-Switch Operating mode: pulsed Laser power: 10 W at 60 kHz Beam divergence:

Sąlyga: labai geros būklės (naudotas), IPG Ytterbium Fiber Laser with Control Unit We offer you an IPG Ytterbium Fiber Laser with control unit here. IPG Ytterbium Fiber Laser Type: YLP-C-1-100-20-20 Condition: used Scope of delivery: (see picture) (Changes and errors in the technical specifications are subject to change!) Itsdpfx Afsf T Rwqe Ieb If you have any further questions, we are happy to assist you by phone.

Sąlyga: naudotas, Trumpf TruDisk 4002 (6C) High-Performance Disk Solid-State Laser up to 4 kW Itedpfx Afowzabqj Ijb The Trumpf TruDisk 4002 (6C) is a state-of-the-art, efficient, and robust disk laser designed for demanding industrial metal processing. System type: TruDisk 4002 (6C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204 No further inspection was performed in-house. Operating hours could not be read. The laser operated flawlessly up until the end. It offers: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture Ideal for various applications in the automotive industry, mechanical engineering, or surface processing. Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: approx. 1030 nm (infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (benchmark for outstanding quality), often in a range of 2–25 mm·mrad - Output options: Modular design – up to 4 outputs possible (depending on model) - Optional cooling: Water-cooled, e.g., via KLH chiller or integrated heat exchanger/compressor - Modular construction: Robust optical design, efficient operation, power factor correction, energy-saving modes, PROFIenergy interface Typical Applications: - Laser welding (also hybrid or scanner-controlled), e.g., in bodywork or transmissions - Cutting / flame cutting of metals with high precision - Surface treatment, coating applications, etc. – professional industrial applications Power supply: - 380 V (-10 %) to 460 V (+10 %), 3AC + PE - Frequency: 50 – 60 Hz - Power consumption: 22 kW / 23 kVA - Rated current: 32.5 A at 400 V - Protection class: IP54 - Short-circuit resistance: Icn / SCCR 50 kA - Weight: 850 kg Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) We will be happy to answer any further questions by phone.

Sąlyga: naudotas, Trumpf TRUMPF TruDisk 4002 (4 C) High-Performance Solid-State Disk Laser up to 4 kW Model: TruDisk 4002 (4 C) The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with high demands on quality, precision, and automation. The combination of high output, excellent beam quality, and smart factory features makes it particularly attractive for modern production lines. System type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing no.: 20-10-02-A3* No further testing has been carried out onsite. Operating hours could not be retrieved. The laser was running flawlessly until decommissioning. Technical features: Performance & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad depending on configuration) Modular & compact: footprint < 1 m², modular design simplifies servicing/maintenance Efficient energy & cooling systems: Energy saving modes, active power factor correction, pulse function for reduced consumption Flexible cooling: integrated heat exchanger (5–28 °C), optional with compressor (inlet temperature up to 38 °C) Reflection-resistant: special resonator design suitable for highly reflective metals Industry 4.0 capable: extensive sensor system & data interfaces for condition monitoring, OPC-UA, predictive maintenance Application possibilities: Scanner & hybrid welding (e.g. car body construction, shipbuilding) High-speed cutting, even of reflective metals Flame cutting & surface processing Cladding, hardening, deep penetration welding for high-precision requirements Itedpfxewzahde Af Isb Technical data: Supply voltage: 380 V (–10%) to 460 V (+10%), 3-phase + PE Frequency: 50 – 60 Hz Power input: 23 kW / 25 kVA Rated current: 34 A at 400 V Protection class: IP 54 Short circuit resistance: Icn / SCCR 50 kA Weight: 850 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) For further questions, please do not hesitate to contact us by phone.

Sąlyga: naudotas, Trumpf Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly built disk laser optimized for demanding industrial metal processing. Model: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of Manufacture: March 2016 Drawing Number: 20-10-03-A204* No further in-house testing was performed. Operating hours could not be retrieved. The laser functioned perfectly up to the point of decommissioning. Features: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient modular architecture Ideal for a wide range of applications in the automotive industry, mechanical engineering, or surface processing. Technical Highlights: - Power: From 80 W up to max. 4000 W continuous operation (CW) - Wavelength: Approx. 1030 nm (Infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (benchmark for excellent quality), typically in the range of 2–25 mm·mrad - Output options: Modular design – up to 4 outputs possible (depending on series) - Optional cooling: Water-cooled, e.g. via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical construction, efficient operation, power factor correction, energy-saving modes, PROFIenergy connectivity Typical Applications - Laser welding (including hybrid or scanner-guided), e.g., for car bodies or gearboxes - Metal cutting / flame cutting with high precision - Surface processing, coating application etc. – professional industrial use Power supply: Itodpfxewzaius Af Ieb - 380 V (-10 %) to 460 V (+10 %), 3-phase + PE - Frequency: 50 – 60 Hz - Power consumption: 22 kW / 23 kVA - Rated current: 32.5 A at 400 V - Protection class: IP 54 - Short-circuit resistance: Icn / SCCR 50 kA - Weight: 850 kg Condition: used Scope of delivery: (See image) (Specifications and details subject to change and error!) For any further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Laser System with Laserline Diode Laser and Lascon Controller Here we offer you a Lascon laser system with Lascon Controller LPC03. Laserline Diode Laser The diode laser "LDM 500-60" has a wavelength of 935 nanometers and an output power of 550 watts. Iedpfjdux Duox Af Ietb Laser Type: LDM 500-60 Wavelength: 935 nanometers ±10% Laser Power: 550 W Mains Voltage: 100-264V ± 10% Maximum Power Consumption: 1.7 kW Frequency: Single phase, 47–63 Hz Type: LDM 500-60 Lascon Controller LPC03 The LPC03 features the performance of a full-fledged PC in a very compact design. Instead of a hard drive, a removable flash disk is installed. The absence of a hard drive and the minimal heat generation make the LPC03 particularly suitable for measuring, control, and regulation applications in industrial environments. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is simply connected at the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical Data: Motherboard: Half-size CPU card Slots: 1 x PCI, max. length 180 mm Drives: None Storage medium: Removable flash disk Connections: Front USB; rear Ethernet, RS232, VGA, keypad, mouse, USB Housing: 212 mm x 80 mm x 250 mm (H x W x D) Protection class: Front: IP40 Ambient temperature: 15°C - 40°C Type: LPC03 Condition: Used Scope of delivery: (see picture) (Subject to changes and errors in the technical data. All information is subject to confirmation!) If you have any further questions, we will be happy to answer them by phone.

Sąlyga: geras (naudotas), Trumpf HAAS Type: HAAS Laser HL556D Laser Wavelength: 1064 nm Minimum Power: 5 W Maximum Regulated Power: 550 W Beam Parameter Product: 25 mm-mrad External Dimensions: Width 1250 mm, Height 1580 mm, Depth 720 mm Power Cable with Plug: Length: 5.5 m Plug: CEE round plug, 5-pin 63A-6h Cooling Water Hoses: Connections for supply and return: 1 inch The hoses are pushed onto the fittings and sealed with two hose clamps each. Electrical Interfaces: Serial interfaces for service purposes Ethernet interface for operator PC Analog input card interface ASV interfaces for safety circuits Output for laser power measurement values Interface for connecting the control panel Ijdpfx Afec Tk Iyo Ietb Emergency stop interface Electrical Connection Values: Mains 20-01-37-00 400 V ± 10%, 3P + PE, 50 Hz 20-01-38-00 400 V ± 10%, 3P + PE, 60 Hz Scope of delivery: (Laser system, laser head, and spare cable ...) (Subject to changes and errors in technical data and specifications!) Should you have any further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Ytterbium Fiber Laser Type: YLR-2400 S2-WW Description: Laser cell (fiber laser IPG YLR-2400 S2-WW with cooling) Year of manufacture: 2017 S/N: 7121450 Laser source 2.4 kW Laser structuring system, cooling unit KKW; Itjdpfx Aef Dkftef Isb without 3D scan head as well as without laser spy sensors and cables. 400 VAC +/-10% 3P/PE 50/60 Hz 80A Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in the technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Gamybos metai: 2015, veikimo valandos: 13 792 h, Sąlyga: paruoštas naudoti (naudotas), Allgemeine Daten Maschinengewicht: 8.000 kg Steuerung Hersteller: MAZATROL Modell: Preview 3 Hauptantrieb Ijdpfx Afox D I Twj Ietb Laserleistung: 4,0 kW Werkstück Werkstückgewicht: 900 kg Tisch Außenlänge: 3.000 mm Außenbreite: 1.500 mm Tischbelastung: 900 kg Diese Faserlaser-Schneidmaschine wurde 2015 hergestellt. Sie verfügt über einen 4,0 kW IPG-Faserlaser und eine MAZATROL PREVIEW 3 CNC-Steuerung, optimiert für präzises Schneiden von Baustahl bis 9,0 mm und Edelstahl bis 16,0 mm. Die Maschine unterstützt eine Tischgröße von 3.000 mm x 1.500 mm und ein maximales Werkstückgewicht von ca. 900 kg. Wenn Sie auf der Suche nach hochwertigen Schneidleistungen sind, empfehlen wir Ihnen die bei uns zum Verkauf stehende Mazak OPTIPLEX 3015 FIBER II. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche Schneiden

Gamybos metai: 2024, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dulkių šalinimas, dūmų ištraukimas, kampinis vožtuvas, For sale is a JustLaser fiber laser, model JustMark 4.2. The device was purchased brand new in December 2024 directly from the manufacturer, JustLaser, located in Haag an der Amper (location). Included is a special extraction system from the same manufacturer as well as two lenses with the following marking fields: • 110x110mm and 150x150mm engraving area. The machine has seen very little use and is in like-new condition. Sale is due to a new investment. It is ideal for processing metals, stainless steel, plastics, and more. Manufacturer’s description: The JustMark fiber laser guarantees the simplest and fastest laser markings. Thanks to its safe and durable product design and low investment costs, the JustMark provides a risk-free entry into the world of laser markers. It is perfect for applications in mechanical engineering, medical technology, toolmaking, automotive industry, electronics & semiconductors, nameplate marking, plastics processing, part marking for watch components, ball bearings, handguns, and much more. The JustMark is an efficient, flexible, and fast laser marking solution. The JustMark 4.2 is the ideal entry-level model for laser marking. With its compact dimensions, the JustMark 4.2 laser marker is a space-saving solution, allowing for fast and easy commissioning. Marking of nameplates, components, tools, and more made from metal and plastic are typical applications for this fiber laser. Itedpex N Nbvefx Af Isb Viewing can be arranged by appointment at any time. Pickup only. Price is net. Invoice with VAT will be issued.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, pavaros tipas: elektrinis, valdiklių gamintojas: Cypcut, valdiklio modelis: 2000E, lazeri tipas: šviesolaidinis lazeris, lazdo šaltinio gamintojas: MAX/RAYCUS 3000, lazerio šaltinio modelis: 3000, lazerio galia: 3 000 W, maks. lakšto storis: 20 mm, plieno lakšto storis (maks.): 20 mm, nerūdijančio plieno lakšto storis (maks.): 10 mm, aliuminio lakšto storis (maks.): 10 mm, žalvario lakšto storis (maks.): 6 mm, vario lakšto storis (maks.): 6 mm, stalo ilgis: 1 500 mm, stalo plotis: 900 mm, darbinis ilgis: 1 500 mm, darbinis plotis: 900 mm, garantijos trukmė: 12 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, centralizuota tepimo sistema, dokumentacija / vadovas, dūmų ištraukimas, CNC lazerinė metalo lakštų pjovimo staklės, pilnai uždara konstrukcija. Itodpfx Afjx Rn Tme Iob

Sąlyga: naudotas, Lubų lazeris LAP LASER CAD-PRO - naudotas - Papildomas komplektas tinkamas: pvz., HOLZ-HER ProMaster, Dynestic, Epicon, įskaitant LAP Ethernet sąsają, 4 pasukami taikiniai su laikikliais ----- Techniniai duomenys ----- Projekcijos spalva: žalia, Maitinimo įtampa: 24 V DC, LAP jungties kabelis: 25 m Ijdpfoxltvysx Af Ijtb

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2019, Bendrieji duomenys Mašinos svoris: 14000 kg Matmenys (aukštis): 2250 mm Judėjimas Judėjimas X ašyje: 3070 mm Judėjimas Z ašyje: 130 mm Judėjimas Y ašyje: 1570 mm Iedpfxsx S Sklj Af Ietb Pagrindinė pavara Ašių skaičius: 3 Lazerio galia: 8 kW Matmenys Mašinos ilgis: 10500 mm Ši 3 ašių LVD Phoenix FL 3015 buvo pagaminta 2019 m. ir turi 8 kW IPG lazerio šaltinį, galinti apdoroti lakštus iki 3000 × 1500 mm. Maksimalus greitasis pozicionavimas – 140 m/min, didžiausias lakšto svoris – 900 kg. Jei ieškote aukštos kokybės pjovimo galimybių, apsvarstykite mūsų parduodamą LVD Phoenix FL 3015. Dėl išsamesnės informacijos – susisiekite su mumis. Pritaikymo sritys Pjovimas

Gamybos metai: 2024, Sąlyga: beveik kaip naujas (parodų įrenginys), Rolleri C-UP-1500 EVO support bar cleaner for cleaning support plates on flatbed laser systems Milling unit with pneumatic pull mechanism for web widths of 3 and 4 mm Handle length 2000 mm suitable for laser systems with 2000 mm processing width Demonstration unit Itedjwtqqyopfx Af Iob

Sąlyga: geras (naudotas), Gamybos metai: 2007, Working area X 4000 mm, Y 2000 mm, Z 115 mm Weight 16,000 kg Dimensions (L x W x H): approx. 9800 mm x 5300 mm x 2000 mm Control: Siemens Sinumerik 840 D Laser type: TruFlow 4000 W Max. sheet thickness: 20 mm Itodpfjvtm Szsx Af Ieb 4000 mm x 1250 mm Feed rate: 3400 mm Dismantling, loading, and crane work are not included in the machine price – additional charges apply for all services. NC: 88631 – Resonator/HD Pump 1: 87603 – Beam On / Pump 2: 53667 Technical parameters: - Model: KNC/H 1500/65 - Maximum temperature: 650 °C - Recommended operating temperature range: 300°C – 600°C - External dimensions approx. (W x H x D): 2800 x 3200 x 2100 mm * Height including door mechanism for hydraulic opening - Internal dimensions (W x H x D): 1500 x 1000 x 1000 mm - Number of heating zones: 1 - Max. batch weight: 1000 kg - Heating power: 48 kW - Furnace weight: approx. 1300 kg - Voltage: 3/PEN 400/230 V AC 50 Hz - The damper is part of the furnace, serves for automatic temperature control inside the furnace, and is controlled by the controller’s program. - Including technical documentation in Slovak - Temperature field measuring and optimization report in accordance with DIN 17052-1 ΔT10°C (measured in an empty furnace at Tmax) - Technical documentation is in Slovak. Manufacturer: LAC, s.r.o., Czech Republic Year of manufacture: 2021 This is an electric furnace with a heating system consisting of resistance heating elements located near the fan unit. The fan circulates the atmosphere in the heating chamber over the heating branches, thereby heating both the working atmosphere and the load inside the furnace. The furnace working chamber is equipped with a separately controlled heating unit at the rear wall. For optimal temperature distribution throughout the working space, the furnace is fitted with a radial circulation fan with a horizontal shaft. The circulation fan drives the heated air through the circulation channels of the recirculation insert. All rotating parts are protected against accidental contact. The temperature profile of the device is managed by a programmable PID INDUSTRIAL controller. This controller allows up to 30 heat treatment programs to be created, depending on process technology requirements and the properties of the batch being processed. See attached drawing for dimensions.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2015, Šis "Bystronic Fiber 4020 6KW" buvo pagamintas 2015 m. Jame yra įrankių keitiklis, skirtas iki 2030 mm x 4030 mm formato lakštams, ir 6 kW galios pluoštinis lazeris. Operatoriaus terminalas turi jutiklinį ekraną, USB sąsają ir veikia su "Windows XP" operacine sistema. Šios staklės dirba nedaug valandų, todėl idealiai tinka tikslioms pjovimo užduotims atlikti. Susisiekite su mumis ir gaukite daugiau informacijos. • Įrankių keitiklis, skirtas lakštinio metalo formatams 2030 mm x 4030 mm • Operatoriaus terminale yra: kietasis diskas, USB 2.0 sąsaja, tinklo plokštė, DVD-RW greitam atnaujinimui, "Windows XP" operacinė sistema, jutiklinio ekrano funkcija, standartinė kompiuterio klaviatūra (JAV) • 6 kW pluoštinis lazeris • Mažai darbo valandųĮ komplektą įeina: • "Trumpf" prekės ženklo rūdžių palaikymo valiklis Itodpfx Afex Imqre Ieb • Vakuuminis lakštinio metalo lifte

Sąlyga: labai geros būklės (naudotas), Macsa ID K serijos CO2 lazeriniai kodavimo ir ženklinimo įrenginiai. Gamintojas: Macsa ID Tipas: SPA K-1030 Maitinimo šaltinis: 125 V/230 V; 50/60 Hz; (1 fazė + N) 660 VA Ženklinimo galvutė: KS2-1000-10,2 μm, sandari CO2 lazerinė lempa, HF technologija, 10,2 μm Darbinis atstumas: 85–400 mm Matmenys: 235 x 193 x 656 mm Svoris: 40 kg IP54 Iedpfx Ajxf Dmvjf Ietb

Sąlyga: naudotas, Gamybos metai: 2012, įvesties srovės tipas: trifazis, filtravimo plotas: 62 m², siurbimo galia: 2 500 m³/val, neigiamas slėgis: 9 000 Pa, Dust extractor, welding fume extractor, self-cleaning pneumatic filter, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, which ensures high device efficiency. Large filtration area requiring minimal space. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters, it results in minimal pressure loss. Short compressed air pulses during the filtration process provide effective filter cleaning. Fan power: 7.5 kW Capacity: 2,500 m³/h at up to 9,000 Pa pressure Filter cartridges: 11 pcs. Isdpfxsxrpmze Af Iotb Filtration area: 62 m² The device is equipped with an automatic cartridge filter impregnation system. The extractor is designed for special applications where the filtered fumes and dust may be moist and sticky. Impregnation agent dosing captures the moisture from the fumes, allowing the filters to be protected from clogging. In this case, the lifespan of the cartridge filters is extended. Stock no.: 0981

Gamybos metai: 2021, Sąlyga: paruoštas naudoti (naudotas), - NAUDOTA - PLUOŠTO LAZERINIO PJOVIMO STAKLĖS SU PALETĖS KEITIKLIU IR PAKROVIMO/IŠKROVIMO SISTEMA Itodjwwxuzopfx Af Ieb X AŠIES EIGA: 4064 mm Y AŠIES EIGA: 2032 mm Z AŠIES EIGA: 70 mm DARBO ZONA: 4000 x 2000 mm MAKS. STALO APKROVA: 1270 kg ŠALTINIS: FIBER 6000; 6000 W VALDYMO BLOKAS: ByVISION PRIEDAI: NEŠIOJAMAS VALDYMO RANKENĖLĖ; DŪMŲ IŠTRAUKĖJAS PASTABA: SU ANTIL SPA 4020 SISTEMA, pagaminta 2021 metais

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2019, DMG MORI DMG MORI LASERTEC 30 SLM (2nd Gen.) Metal 3D Printer 600–1000 W Fiber Laser For sale is a DMG MORI LASERTEC 30 SLM 2nd Generation, a professional industrial system for metal 3D printing using Selective Laser Melting (SLM) technology. The machine is suitable for highly precise functional components, prototypes, lightweight structures, and small batch manufacturing in industry, aerospace, medical, and toolmaking sectors. The system has been professionally operated and maintained and is in excellent condition. Machine technical data: Model: LASERTEC 30 SLM 2nd Gen. Year of manufacture: 2019 Weight: approx. 1,300 kg Dimensions: approx. 1900 × 1100 × 2000 mm Build volume: 300 × 300 × 300 mm Layer thickness: 20–100 µm Laser type: Ytterbium fiber laser Laser power: 600–1000 W Materials: Stainless steel, tool steel, titanium, aluminum, CoCr, Inconel, etc. Control: CELOS Touch-Screen Electrical data: Supply: 400 V ±10%, 50/60 Hz Power consumption: 17.3 kVA Max current draw: 25 A Recommended fuse protection: 25–32 A DC control voltage: 24 V AC control voltage: 400 V Shielding gas supply: Gas: Argon 4.6+ Minimum consumption (flooding): 1000 L Average consumption: 72 L/h Gas pressure: 6–8 bar Connection: W21.80 × 1/14” Cooling system (HYDAC RFCS-G2-002600): Refrigerant: R134a Cooling capacity: 2.2 kW Pump capacity: 15 l/min at 3 bar Dimensions: 871 × 610 × 639 mm Weight: approx. 80 kg Fire extinguishing system: Automatic LIFDESTM system Trigger temperature from 110 °C Optical & acoustic alarm (95 dB) Important note: "The table shown in the photos is not included in the sale." Condition: used Ijdpfx Ajx Ei Smjf Ijtb The system was fully operational up until decommissioning, is clean, well-maintained, and both technically and visually in very good condition. Scope of delivery: (see photos) - DMG MORI LASERTEC 30 SLM machine - HYDAC industrial cooler - DMG MORI SmartKey USB dongle - Extensive documentation (multiple folders) - Powder sieving machine integrated into the system - Filter element - Accessories as depicted (Subject to technical data changes and errors!) If you have further questions, we will be happy to answer them for you by phone.