Wille 655 C pirkti naudotą (11 381)

Sąlyga: labai geros būklės (naudotas), CTS Climate Test Chamber C-55/1000 Li Water-Cooled Temperature range: -50°C to +100°C Humidity range: 5% to 95% rH Dew point range: 5°C to +78°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 CTS series designation breakdown (example: Type C -55/1000/Li): 1) C: Climate 2) -55: lower temperature -55°C 3) 1000: 1000 liters test chamber volume 4) Li: special equipment for tests with lithium-ion batteries Control: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for external test object control Test chamber lighting: Energy-efficient, high-luminance LED strip mounted on the door Shelf: Stainless steel, support surface 970 x 980 mm Maximum load per shelf: 35 kg Total load at max shelf configuration: 100 kg Feed-throughs: 1a: NW50 1b: 2x NW125 Ljdpfx Aeva Hi Hjbkjak 1c: 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range: -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat compensation: Approx. 4000 W at +20°C Approx. 2200 W at -40°C Climate tests: Temperature range: +5°C to +95°C Humidity range: 5% to 95% RH Dew point range: +5°C to 78°C Temperature deviation ≤ ±1.0 K over time Humidity deviation ≤ ±3.0% rH over time The technical data refers to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options can affect the performance data. Dimensions: Test chamber volume: 1000 liters Test chamber internal dimensions: Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions: Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated current: 18 A Rated power: 9.5 kW Protection class: IP 54 Sound pressure level: < 58 dB(A) (measured in accordance with DIN EN ISO 3744, at 1 m distance, front side) Weight: approx. 1000 kg Heat emission to placement area: 10.4 kW Cooling unit: Water-cooled, low noise, fully hermetic Stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Important information for buyers regarding safety: The following steps are performed in advance for our offered chambers: 1. Function check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications, technical data, and information are subject to change and error!) Further questions gladly answered for you by phone.

Sąlyga: labai geros būklės (naudotas), TIRA Type: TCZ 4022 S -2K Description: Air-cooled Climate Simulation Chamber System Composition: The system consists of the following main assemblies: - Walk-in, insulated chamber - Air treatment compartment - Humidification system - Machinery compartment - Control cabinet Technical Data: Performance range for temperature testing: - Temperature range: -40...+140°C - Temperature stability, in supply air (temporal): ≤ ± 0.5°C (without thermal test chamber load, in accordance with DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ± 1.0°C (without thermal test chamber load, in accordance with DIN 50011 / EN 60068) - Heating rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load per DIN 50011 / EN 60068, or test specimen in the temperature range -30°C...+85°C) - Cooling rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load per DIN 50011 / EN 60068, or test specimen in the temperature range -30°C...+85°C) Performance range for climate testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% rh (without thermal chamber load) - Dew point temperature range: +5...+89°C (without thermal chamber load) - Humidity stability (in supply air, temporal): ≤ ±2.5% rh (measured in supply air) Performance range for climate testing with heat compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% rh (without thermal chamber load, with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal chamber load) Dimensions: - Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm - External dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening, test chamber door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design Features: - Air guidance: * Supply air: Perforated sheet at the rear wall, in the ceiling area * Exhaust air: Perforated sheet at the rear wall, in the floor area - Temperature control: * Direct cooling via evaporation of refrigerant in a finned heat exchanger * Heating via electric resistance heater - Dehumidification: * Direct dehumidification by evaporating refrigerant in a heat exchanger - Interior cladding: Stainless steel - Exterior cladding: Galvanized, powder-coated steel sheet - Floor design: Stainless steel, floor load 15,000 N/m² - Wheel load (bearing surface ≥4 cm²): 1,500 N/wheel - Door: Double-wing door, stainless steel, lacquered exterior with viewing window (W x H) 1,000 x 1,000 mm - Chamber lighting: 4 spotlights at 500 W each - Insulation: Double-layer, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc.): Blitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc.): EDB 40 Color scheme: - Chamber: RAL 9010, white - Door: RAL 9010, white - Machine unit: RAL 7032, pebble grey - Control cabinet: RAL 7032, pebble grey Weights: - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg Lajdpovx S Hhefx Abksk - Humidifying unit: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50Hz - Rated power: 95 kW - Rated current: 150 A

Sąlyga: labai geros būklės (naudotas), Vötsch Type: VC 7018 Vötsch Climate Test Chamber VC 7018 Water-Cooled Lodpowh Ttmefx Abksak Control Unit: "Touch Panel" All control and operation commands can be executed by simply touching the function icons on the "Touch Panel" control unit. Leveling Feet To compensate for uneven floors and to ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These allow measuring cables and test devices to be routed into the test chamber. Standard feedthroughs installed: R1: nominal width 125 mm L1: nominal width 50 mm Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Specifications for Temperature Testing: Temperature Range: -70°C to +180°C time-related ±0.1 to ±0.5 K spatial ±0.5 to ±2.0 K Temperature Change Rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Specifications for Climatic Testing: Temperature Range: -10°C to +95°C Humidity Range: 10% to 98% r.h. Temperature deviation over time in center of usable space ±0.1 to ±0.3 K Temperature deviation spatially ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity deviation over time in center of usable space ±1 to ±3 % r.h. Electrical Connection: Rated voltage: 3/N/PE AC 400V ±10 50Hz Rated power: 5.9 kW Rated current: 12.0 A Connection cable: 3.5 m Protection: 16 A slow-blow, to be installed on site Refrigerants: R-404A and R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg net For your safety as a buyer, please note the following information! The following steps are completed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical data subject to changes and errors!) For further questions we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer a Vötsch climatic test chamber. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Lsdpoqwim Eefx Abkeak Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Volume: 990 liters Feed-throughs: Ø 125 mm, Ø 50 mm Data for temperature tests: Temperature range: -42°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 Watts Data for climate tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3% RH Heat compensation max.: 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Nominal power: 11.5 kW Nominal current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 For your security as a buyer, please note the following information! The following measures are performed on all of our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon completion of testing, the chambers undergo documented trial operation. Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Sąlyga: labai geros būklės (naudotas), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Data for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rate: Heating 6.0 K/min Cooling 11.5 K/min Temperature deviation: Over time: ± 0.8 K Spatial: ± 2.0 K Heat compensation max. 8000 W Data for Climate Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% r.h. Temperature deviation over time: ± 0.3 K Humidity deviation over time: ± 3% r.h. Temperature uniformity: Spatial: ± 1.0 K Heat compensation max. 500 W Test chamber volume: 2160 liters Test chamber dimensions: Height 1115 mm, Width 1400 mm, Depth 1400 mm External dimensions (lowered): Height 2318 mm, Width 1860 mm, Depth 3658 mm External dimensions above shaker: Height 2710 mm External dimensions max. stroke height: 3038 mm Interchangeable floor dimensions: Width 1600 mm, Depth 1504 mm Operating Data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side circuit protection: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2100 kg For your safety as a buyer, please note the following information! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and details subject to change or error!) Ljdpfx Absw I Rxrskeak We are happy to answer any further questions by phone.

Sąlyga: naudotas, Type: CS-70/900 CTS Climate Test Chamber with Humidity, Water-cooled (converted to refrigerant R-452a) Temperature range: -70°C to +180°C Humidity range: 10–98% r.H. Test chamber dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerants: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50Hz Connected load: 21.2 kW, Rated current: 35.7 A Lodpfoxb Dm Isx Abkoak Climate test chamber weight: 900 kg Control cabinet weight: 150 kg Important safety information for the buyer! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with compliant refrigerant in accordance with legal standards 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical specifications and data!) If you have any further questions, we would be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Type: ClimeEvent C/340/70/3 Climate Test Chamber, Air-Cooled Test Chamber Internal Dimensions: Height 750 mm x Width 580 mm x Depth 450 mm Housing Dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm Specifications for Temperature Tests: Temperature Range: -40°C to +180°C Temperature Change Rate, Cooling: 4.0 K/min Temperature Change Rate, Heating: 3.2 K/min Specifications for Climatic Tests: Temperature Range: +10°C to +95°C Dew Point Range: -3 to +94°C Humidity Range: 20% to 90% r.h. Temporal Temperature Deviation in Test Area: ± 0.1 to ± 0.5 K Spatial Temperature Deviation: ± 0.5 to ± 1.0 K Electrical Connection: Nominal Voltage: 3/N/PE AC 400V ±10% 50Hz Nominal Power: 4.1 kW Nominal Current: 14.0 A Laedpoxn Swujfx Abkek Refrigerants: R449A & R23 Test Chamber Volume: approx. 335 liters Weight: approx. 520 kg net For your safety as a buyer, we provide the following information! The following procedures are performed in advance on all chambers we offer: 1. Functionality check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak testing with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see images) (Specifications and data subject to change and error!) For further questions, please feel free to contact us by phone.

Sąlyga: geras (naudotas), Vötsch Model: VCS 7130-10 Vötsch Climate Test Chamber, water-cooled Temperature Test Data: Temperature range: -70°C to 180°C Temperature deviation over time at chamber center: ±0.3 to ±0.8 K Spatial temperature deviation: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 11 K/min Cooling: 10.5 K/min Climatic Test Data: Temperature range: +10°C to +95°C Humidity range: 10 to 98 % r.h. Temperature deviation over time at chamber center: ±0.2 to ±0.5 K Laodpfx Aowynmxobkek Spatial temperature deviation: ±0.5 to ±1 K Temperature gradient: 1 to 2 K Humidity fluctuation over time at chamber center: ±1 to ±3 % r.h. Technical Data: External dimensions with hinges and door lock: Height: 1995 mm, Width: 1680 mm, Depth: 1855 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1300 mm, Depth: 1855 mm Internal dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm Test chamber volume: approx. 1300 liters Feedthroughs: The test chamber is equipped with feedthroughs on the right and left sides. These allow for the insertion of measuring leads and test equipment into the chamber. 1 x right, nominal width 125 mm 1 x left, nominal width 50 mm Chamber lighting: Halogen bulb 24 V, 50W 3/N/PE AC 400V ±10% 50Hz Nominal power: 34.0 kW Rated current: 50.0 A Fuse (on-site): 100 A slow-blow Max. heat emission to environment: 2.2 kW Permissible test specimen weight: Total load on rack supports: 100 kg Chamber floor: 150 kg, insert rack: 50 kg Refrigerant: R 404A / R 23 Weight: 1600 kg For your safety as a buyer, please note the following information: The following work is carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Changes and errors in technical data, specifications reserved!) For further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer a Mytron drying cabinet. The WT 850 drying cabinet is designed for simultaneous drying of multiple products or auxiliary devices in the semiconductor industry. Due to its robust construction (box-section frame design) and the use of stainless steel materials for the heating chamber, the WT 850 drying cabinet is suitable for universal applications. The roll-in trolley allows for easy loading and unloading of the WT 850 drying cabinet. An exhaust connection with control damper enables the cabinet to be connected to a central extraction system. Technical specifications: - External dimensions: width 1145 mm x height 1880 mm x depth 1810 mm - Heating chamber dimensions: width 850 mm x height 690 mm x depth 1410 mm - Chamber volume: approx. 830 liters - Weight: approx. 230 kg, trolley 50 kg - Temperature range: 10°C above ambient temperature up to +120°C - Spatial temperature uniformity: ± 1°C - Temporal temperature stability: ± 1°C - Mains connection: 3NPE AC 50 Hz 400 V, 16 A CEE plug - Power consumption: 4.5 kVA - Fusing: 3 x 16 A, 1 x 6 A - Control: digital controller - Safety device: adjustable over-temperature protection - Pass-through ports: - Exhaust connection 100 mm with control damper (top) - Intake connection 100 mm with control damper (top) - Type: WT 850 - Condition: used - Scope of delivery: (see picture) Ledpfx Aboiwyiwoksak (Specifications are subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Tipas: VT 3050 Surinkimo dalys / Bandymų spinta Temperatūrinė kamera Oro aušinimas Bandymų kameros tūris 500 litrų Temperatūros diapazonas -30°C /+100°C Laiko temperatūros svyravimas K ±0,5 Lasdew S E N Tepfx Abkok Erdvinis temperatūros svyravimas K ±1,5 Temperatūros gradientas K 3 Keitimosi greitis Šildymas K/min 2,0 Vėsinimas K/min 1,4 Šilumos kompensacija maks. W 650 Kalibravimo vertės +23°C +80°C Bandyminės kameros matmenys Plotis 710 mm Gylis 590 mm Aukštis 1250 mm Išoriniai matmenys Plotis 940 mm Gylis 1030 mm Aukštis 1955 mm Garso slėgio lygis db(A)

Sąlyga: labai geros būklės (naudotas), CTS Model: C-40/350 Ex/l Water-cooled Climate Test Chamber ATEX Zone 1 The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for use in environments where explosive atmospheres may occur. Such devices are specifically engineered and tested to ensure safety in these environments. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate (according to IEC 60068-3-5): Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: approx. 3500 W at +20°C approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ +3.0% r.h. over time The technical specifications refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Design: Refrigeration unit: Lodpfx Ajwvr H Uebkoak water-cooled, low noise, fully hermetic, infinitely variable capacity control via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: floor load 150 kg/m² Insert grid: stainless steel, support surface 620 x 600 mm Max. load per grid: 35 kg Total load with maximum racks: 100 kg Control system: 32-bit controller LCD operating panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Ethernet interface Free switching channels for customer-side test object control Dimensions: Test volume: 350 litres Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Rated power: 7.15 kW Rated current: 14.3 A Protection class: IP 54 Sound pressure level:

Sąlyga: geras (naudotas), Type: VCS 7034-5 Water-cooled Climate Test Chamber Vötsch VCS 7034-5 Lsdpfxexgd Rdj Abkoak Test Chamber Volume: 335 liters Specifications for Temperature Testing: - Temperature range: -70 to +180°C - Temporal temperature deviation K: ±0.1 to ±0.5 - Spatial temperature deviation K: ±0.5 to ±2.0 - Temperature gradient: 1 to 4 - Rate of change: - Cooling: 6.7 K/min - Heating: 6.8 K/min - Heat compensation at +20°C: 3000 W / at -20°C: 3000 W - Temperature calibration values: +23°C and +80°C Specifications for Climate Testing: - Temperature range: +10 to +95°C - Temporal temperature deviation: ±0.1 to ±0.3 K - Spatial temperature deviation: ±0.5 to ±1.0 K - Temperature gradient: 1 to 2 K - Humidity range: 10 to 98% - Temporal humidity deviation: ±1 to ±3% - Dew point range: -3 to +94°C - Heat compensation: 400 W - Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test Chamber Internal Dimensions: - Width: 580 mm - Depth: 765 mm - Height: 750 mm External Dimensions: - Width: 870 mm - Depth: 1595 mm - Height: 1775 mm Electrical Connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated Power: 10 kW Rated Current: 21 A Sound Pressure Level: 64 dB(A) Cooling Water Consumption: 1.4 m³/h Refrigerants: R-404A / R-23 For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer a temperature test chamber. Water-cooled Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x Height 2100 mm x Depth 2250 mm Test chamber dimensions: Width 840 mm x Height 840 mm x Depth 840 mm Unit section: Width 2300 mm x Height 2000 mm x Depth 1300 mm Average heating rate: approx. 3 K/min Lsdpfsmn Rciex Abkjak Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Model: VTS 600/45 RS Refrigerant: R452 Condition: used Scope of delivery: (see photo) (Technical data and specifications may be subject to change and errors!) We are happy to answer any further questions by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Model: VTS³ 7027-25 Heraeus Vötsch Temperature Test Chamber, Water-cooled Performance Data: With a temperature change rate of 25 K/min Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 615 mm External dimensions: Height 1775 mm, Width 780 mm, Depth 1895 mm Temperature range: -72°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 Spatial temperature uniformity: ± 0.5 to ± 2.0 Rate of temperature change (cooling): 25 K/min Rate of temperature change (heating): 25 K/min Heat compensation at -20°C: 8000 W Heat compensation at +20°C: 8000 W Test chamber volume: 270 liters 2x side ports ∅ 125 mm 1x side port ∅ 50 mm Chamber is water-cooled Chamber lighting: LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 26 KW Rated current: 44 A Refrigerants: R-452A and R-23 Weight: approx. 980 kg Important safety information for buyers: The following procedures are carried out on our offered chambers prior to sale: 1. Functional checks and replacement of necessary components 2. Refilling with legally approved refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Laodpfx Abstz Rqmskjk Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Model: VC³ 0100 Vötsch Climate Test Chamber, Air-Cooled Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Test chamber volume: 990 liters Temperature testing: Minimum temperature: -0°C Maximum temperature: +90°C Temperature change rate cooling: 0.2 K/min Temperature change rate heating: 0.5 K/min Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature homogeneity: ± 0.5 to ± 1.0 K Laodpfx Abetz T D Aekok Heat compensation at +20°C: 350 W Climatic tests: Minimum temperature: +10°C Maximum temperature: +90°C Dew point temperature range: +4°C to +89.5°C Humidity range: 10 to 98% RH Temporal humidity deviation: ± 1 to ± 3% RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature homogeneity: ± 0.5 to ± 1.0 K Power supply: 1/N/PE AC 230V±10% 50Hz Rated power: 2.3 kW Rated current: 10 A Refrigerant: R-404A Weight: approx. 1400 kg Important information for you as the buyer for your peace of mind! The following procedures are carried out on our test chambers prior to sale: 1. Functional check and replacement of necessary components 2. New charging with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data and specifications subject to change and errors!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Type: VC 7018 Vötsch Climate Test Chamber VC 7018 Water-Cooled Control Unit: "Touch Panel" All control and operation commands can be executed by simply touching the function icons on the "Touch Panel" control unit. Leveling Feet To compensate for uneven floors and to ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These allow measuring cables and test devices to be routed into the test chamber. Standard feedthroughs installed: R1: nominal width 125 mm L1: nominal width 50 mm Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Specifications for Temperature Testing: Temperature Range: -70°C to +180°C time-related ±0.1 to ±0.5 K spatial ±0.5 to ±2.0 K Temperature Change Rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Laodpfx Abowgaykekok Specifications for Climatic Testing: Temperature Range: -10°C to +95°C Humidity Range: 10% to 98% r.h. Temperature deviation over time in center of usable space ±0.1 to ±0.3 K Temperature deviation spatially ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity deviation over time in center of usable space ±1 to ±3 % r.h. Electrical Connection: Rated voltage: 3/N/PE AC 400V ±10 50Hz Rated power: 5.9 kW Rated current: 12.0 A Connection cable: 3.5 m Protection: 16 A slow-blow, to be installed on site Refrigerants: R-404A and R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg net For your safety as a buyer, please note the following information! The following steps are completed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical data subject to changes and errors!) For further questions we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Weiss Type: WKL 34/40 Weiss Climate Chamber, Air-Cooled -40°C to +150°C Chamber Volume: 34 litres Standard built-in feedthroughs: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm, Width 324 mm, Depth 300 mm External dimensions: Height 1740 mm, Width 630 mm, Depth 970 mm Specifications for temperature tests: Temperature range: -40 to +150 °C Temperature deviations at equilibrium, according to IEC 60068-3-5: Temporal temperature fluctuation in the usable chamber centre: ± 0.3 to ± 1 K / ± 1 to ± 2 K Spatial temperature deviation (corresponds to temperature gradient): 2 to 4 Temperature change rate (according to IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3.5 K/min Heat compensation: max. 800 W Specifications for climate tests: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature and humidity deviations (at equilibrium, according to IEC 60068-3-5): Temporal temperature fluctuation in the usable chamber centre: ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 (corresponds to temperature gradient): 1 to 3 Temporal humidity fluctuation in the usable chamber centre: ± 3 to ± 5 % r.h. Operating data: Test chamber lighting: halogen lamp 12V, 20W Rated voltage: 1/N / PE AC 230 V ± 10 %, 50 Hz Rated power: 1.8 kW Rated current: 8.0 A Customer-side fuse: 16A slow-blow Heat emission, air-cooled test chambers: Max. heat emission to ambient: 800 W Refrigerant: R-404A Weight: 110 kg Important notice: “The table shown in the photos is not part of the sale.” Laedpfx Abexvpp Rsksk For your peace of mind as a buyer, please note the following steps are carried out on all chambers offered: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical specifications and information!) For any further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer a Weiss temperature chamber. Weiss Temperature Chamber with S!MCON / 32-Control, Air-Cooled (Refrigerant converted to R-452A) Test chamber volume: approx. 335 litres Test chamber dimensions: height 750 mm, width 580 mm, depth 765 mm External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Operating data: Test chamber lighting: halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated current: 12.5 A Rated power: 4.1 kW Required slow-blow fuse: 16 A Sound pressure level: approx. 58 dB(A), measured at 1 m distance from the front at 1 m height Data for temperature testing: Temperature range: -72 to +180 °C Temporal temperature deviation at chamber centre: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): Heating: 3.0 K/min Cooling: 3.0 K/min Heat compensation max. 1500 W Refrigerants: R-452A / R-23 Weight: 585 kg Type: WT3-340/70 Lajdpfxoq U Sdno Abksk Important information for your security as a buyer! The following processes are performed on our offered chambers as standard: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data and specifications subject to change and errors reserved!) For further questions, we are happy to assist you by telephone.

Sąlyga: labai geros būklės (naudotas), Here we offer you a TPS Blue-M temperature convection oven. TPS Blue-M Temperature Convection Oven Blue M 7780 Specifications Temperature range: 15°C above ambient temperature up to 704°C Internal dimensions (W x D x H): 25 cm x 20 cm x 20 cm External dimensions (W x D x H): 51 cm x 38 cm x 72 cm Cladding dimensions (W x D x H): 68 cm x 48 cm x 77 cm Laedsdv Rabopfx Abkok Electrical supply: 380V, 3-phase, 50 Hz CW-7780 features 8 shelf positions on 2" centers Fume extraction hood, stainless steel design, without extraction fan Model: CW-7780-JY-MP550 Condition: used Scope of supply: (See picture) (Subject to modifications and errors in technical data and information!) For any further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), We are offering a BIA multifunction cabinet. Ledpfxjfktnyj Abkeak BIA Multifunction Cabinet Temperature range: +15°C to +30°C and humidity Refrigerant: R-404A 230V 50Hz 10A Type: C890TH For your security as a buyer, please note the following information! The following procedures are carried out on our chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) Should you have any further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), CTS Temperature Test Chamber T-55/1000 Li Water-Cooled Temperature Range: -50°C to +100°C Rated Voltage: 400V 3/N 50Hz Rated Power: 9.5 kW Rated Current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS chamber series is composed as follows: For example, Type T -55/1000/Li 1) T stands for: Temperature 2) -55 stands for: lower temperature limit -55 °C 3) 1000 stands for: 1000 liters test chamber volume 4) Li stands for: Special equipment for tests with lithium-ion accumulators Control: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text Ethernet interface RS 232 interface Free switching channels for user-side test specimen control Test chamber lighting: Energy-efficient, high-luminance LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with maximum rack configuration 100 kg Lodpfsvba Rasx Abksak 1a Feedthrough NW50 1b Feedthrough 2x NW125 1c Feedthrough 2x Rp 3 1/4'' for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation: Approx. 4000 W at +20°C Approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect the performance data. Dimensions: Test chamber volume 1000 liters Internal dimensions Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Operational data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at 1m distance from the front) Weight approx. 1000 kg Heat emission to installation room 10.4 kW Cooling unit: Water-cooled, low-noise, fully hermetic Continuous performance adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Important information for your peace of mind as a buyer! The following points are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful checking, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to change and error in technical data and information!) We are happy to answer any further questions you may have by telephone.

Sąlyga: labai geros būklės (naudotas), Vötsch Type: VT 7060 Vötsch VT 7060 Temperature Chamber 600 Litres with Simcon 32-net Controller Cabinet is air-cooled Reliable climate chamber for demanding environmental simulations Ideal for laboratory, development & quality assurance. Device Description: For sale is a professional temperature chamber from the manufacturer Vötsch Industrietechnik, model VT 7060 with SIMcon 32-net controller. This high-performance unit is suitable for a wide range of demanding environmental simulations, from material testing and electronics testing to long-term climate exposure. Technical Data (excerpt): Model: Vötsch VT 7060 Internal volume: approx. 600 litres Temperature range: –70 °C to +180 °C Temperature deviation at steady state: Over time: ±0.1 K to ±0.5 K Spatially: ±0.5 K to ±2.0 K Temperature change rate (without test specimen): Heating: 4 K/min Cooling: 3 K/min Controller: SIMcon 32-net with touch panel Interfaces: RS232, optionally RS485/422 1 × port NW 50 mm left side 1 × port NW 125 mm left side 2× port NW 125 mm right side External dimensions (approx.): Width 1090 × Height 1960 × Depth 1995 mm Lsdpfx Ajwybb Nsbkjak Internal dimensions (approx.): Width 800 × Height 800 × Depth 950 mm Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerant: R 404A and R 23 Weight approx. 675 kg For your security as a buyer, please note the following information! The following steps are conducted in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Shipping / Collection: Collection preferred Shipping via freight forwarder on pallet throughout Europe possible. (Shipping costs according to effort) Condition: used Scope of delivery: (see image) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Sąlyga: labai geros būklės (naudotas), Espec Model: PSL-4KPH Espec Temperature and Climate Test Chamber, Air-Cooled There is a small dent on the upper edge of the door (see photo). The door closes perfectly, the seal is intact, and the climate chamber functions correctly with no technical faults. The dent is purely cosmetic and has no effect on function, sealing, or control accuracy. Temperature range: -70°C to +150°C Humidity range: 20 to 98% RH Temperature/humidity variation: ±0.3°C / ±2.5% RH Temperature/humidity stability: ±0.5°C / ±3% RH Heating/Cooling Rates & Times: Heating rate: 5.0 °C/min Cooling rate: 3.0 °C/min Test chamber dimensions (W x H x D): 1000 mm x 1000 mm x 800 mm External dimensions (W x H x D): 1410 mm x 1983 mm x 1593 mm Laedpfx Abowz Er Ueksk Feedthrough with silicone stopper: 100 mm Equipped with RS232 interface Test chamber volume: 800 liters Refrigerants: R-404A, R-508A Stainless steel construction, AC 400 V 3-phase, 50Hz, 31 A Net weight approx. 720 kg For your security as the buyer, the following information: The following points are completed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerants 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see photo) (Technical data subject to change and possible errors!) For any further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Model: VT³ 4100 Laodpfewyu H Eex Abkok Water-cooled Temperature Test Chamber S!MCON/32.NET (with Touch Panel) Features of this controller: - Color touchscreen with intuitive menu (typically 5.7" or larger) - Programming of temperature/humidity profiles including ramps and dwell times - Data acquisition & logging (e.g., temperature progression, alarms) - USB port for data export (CSV, S!MPATI-compatible as applicable) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical Specifications (Temperature Test Chamber) Test volume: 990 liters Temperature range: -40 °C to +180 °C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Temperature change rate (per IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Thermal compensation capacity (max): 4500 W Calibration setpoints: +23 °C and +80 °C Internal dimensions (W×D×H): 1100 × 950 × 950 mm External dimensions (W×D×H): 1390 × 1955 × 1995 mm Cable Ports: - The test chamber is equipped with ports on both the right and left sides. - These allow measurement cables and test devices to be routed into the test space. - 1 × L1 DN 50 mm - 1 × R1 DN 125 mm - 3 × R1 DN 50 mm Power connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Noise level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg Important safety information for buyers! The following steps are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, documented trial run of the chamber Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change and error!) We are happy to answer further questions by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Type: VBT 03/500 Air-cooled Temperature test chest with spray device Technical Description: Data for temperature tests without water: Temperature range: -30°C to +80°C Temperature deviation in steady-state condition according to IEC 60068-3-5, depending on test chamber temperature: timewise ± 1 K Temperature change rate according to IEC 60068-3-5: Heating: approx. 2 K/min Cooling: approx. 2 K/min Data for temperature tests with water: Temperature range: +5°C to +80°C Possible water level: -10 mm to 540 mm Water level = -10 mm: The water level is below the sample rack Water level = 0 mm: Water level is at the upper edge of the sample rack Data for standard spray device: Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B: Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume per additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-tempering: Volume: approx. 2000 L Lsdpfx Aewc Nvgebksak Temperature range for pre-tempering: +5°C to +40°C Temperature change duration: Cooling from +18°C to +5°C: approx. 15 h Heating from +15°C to +40°C: approx. 10 h Data for installation and operation: Test chamber: width 1120 mm, depth 840 mm, height 540 mm Housing: width 2700 mm, depth 1300 mm, height 1575 mm Water tank: width 1100 mm, depth 800 mm, height 2200 mm Feedthroughs: 1 feedthrough Ø 50 mm, installed on left Test chamber volume: approx. 500 liters Refrigerant: R-404a Electrical connection: Nominal voltage: 3/N/PE AC 400V ± 10% 50Hz Nominal power: approx. 26 kW Nominal current: approx. 44.0 A (neutral loaded) Fuse protection: 63 A gG, provided by customer Weight: approx. 890 kg net For your safety as a buyer, the following information: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to technical modifications and errors in data and specifications!) For further questions, we are happy to assist you by phone.