Weiler Lz 300 pirkti naudotą (198)

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C Geometrically Overhauled with Inspection Protocol for Tolerances According to New Machine Standards Technical Data: >> Machine No. 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with Bayonet Lock >> Tailstock Morse Taper 3 >> Feeds from 0.015 to 0.46 mm/rev >> Threading Capabilities: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.18 to 28 mm >> Weight approx. 1,100 kg >> Spindle Brake Switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> New 3-axis digital readout from K&C, 12 months manufacturer warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zero, direction of count switching >> New collet chuck setup, new collets from 3 to 26 mm (in 1 mm increments) >> 160 mm 3-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 steel tool holders >> Bed stop >> Electric chuck guard NEW >> Rear splash guard >> Operating manual >> Coolant system >> Machine mounts About the machine: Todpfx Abjwrm Dtelod Offered is a Weiler Condor 81 lead and feed screw lathe in very good geometrically overhauled condition. The guideways have been newly ground and hand-scraped. Inspection carried out according to the test protocol. Accessories such as collets and chucks are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops—an absolutely like-new lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and allows for ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and see the condition for yourself.

Sąlyga: geras (naudotas), Centre distance: 800 mm Tsdpfxoukrtne Abled Spindle bore: 38 mm Centre height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 170 mm Spindle speed: 24-2800 rpm Dimensions: 1600 mm x 600 mm x 1250 mm Weight: 850 kg

Sąlyga: naudotas, Gamybos metai: 1997, - 4-jaw faceplate Ø 550 mm - 3-jaw chuck Ø 310 mm incl. 4 sets of hard master jaws, 1 set of hard top jaws, 8 sets of soft top jaws - Fixed steady rest - Live center MK5 - Multifix B quick-change tool post incl. 10 tool holders - Operating hours: 32,582 h - Year of manufacture: 1997 - Incl. operating manual and technical documentation Technical Data: Working Area: - Distance between centers: 1000 mm - Center height: 280 mm - Swing over bed: 570 mm - Swing over cross slide: 340 mm - Bed width: 350 mm - Cross slide travel: 340 mm - Compound slide travel: 140 mm - Cross slide length: 700 mm - Cross slide width: 220 mm - Bed saddle guideway length: 560 mm - Turning tool cross-section (H x W): 32 x 25 mm Spindle: - Spindle nose according to DIN 55027: Gr 8 - Spindle diameter at front bearing: 100 mm - Spindle bore: 66 mm - Main spindle internal taper: metric 70 Main Drive: - Drive power 60% / 100% duty cycle: 15 / 11 kW - Max. torque at spindle: 1600 Nm - Total speed range: 1 - 2500 rpm - Gear range I: 1 - 625 rpm - Gear range II: 4 - 2500 rpm Feed Drive: - Type: three-phase servo drives - Feed range longitudinal and cross: 0 - 10 mm/rev - Longitudinal feed force: 9000 N - Cross feed force: 7000 N - Rapid traverse longitudinal/cross: 7 / 3.5 m/min Tailstock: - Quill diameter: 70 mm - Quill stroke: 160 mm - Quill taper: MK5 Thread Cutting Range: - Metric threads: 0.1 - 250 mm - Inch threads: 1/4 - 56 TPI (G/1") - Module threads: 0.125 - 28 - DP threads: 1 - 224 Machine Dimensions: - Dimensions (W x H x D): 2850 x 1750 x 1815 mm - Machine weight: 2950 kg Tsdper Hrq Djfx Ablsd

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1989, Universal lead and feed screw lathe Brand: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted RAL 7035 light grey Machine No.: 1401 Tsdpfx Aog R S Rcoblod with warranty Accessories: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electric interlock, new - Size B quick-change toolpost base - Bed stop - Coolant system - Chip guard/rear panel - Operating manual - used, as seen -

Sąlyga: naudotas, Swing diameter over bed / mm Swing diameter over cross slide / mm Tedpfowgi Tmex Abljd Turning length / mm

Sąlyga: geras (naudotas), Gamybos metai: 1988, Weiler lathe Model Condor B 2-axis digital readout Centre height: 165 mm Tsdpfjvgmbvjx Abljd Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle bore: 40 mm Connected load: 3 kW Speed range: 22–2800 rpm Tailstock: Morse taper 3 Coolant pump (not connected) Work lamp Automatic longitudinal and cross feed Spindle brake - Hinged chuck guard - Splash guard Weight approx. 1040 kg 3-jaw chuck Multifix B quick-change toolpost Live centre

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor B, Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C (NEW) Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: - Machine No. 90-1495 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock Morse taper 3 - Feed rates from 0.015 to 0.46 mm/rev - Possible threads: Metric, Imperial, Module and Diametral Pitch - Metric thread pitches from 0.18 to 28 mm - Weight approx. 1100 kg - Spindle brake engageable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: - 3-axis digital readout by K&C, new, with 12 months manufacturer warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving function, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal, - Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments - 160 mm 3-jaw chuck with two sets of jaws, NEW - Multifix quick change toolpost, size A, with 2 new tool holders - Bed stop - Electric chuck guard, NEW - LED machine lamp, NEW - Rear splash guard - Operating manual - Coolant system - Machine feet About the machine: Tedpfx Aevambcsblsd Offered is a Weiler Condor B lead and feed screw lathe, geometrically overhauled and in as-new condition. The guideways have been reground or newly hand-scraped. Supplied with a certified inspection protocol. A very attractive machine with electronic spindle protection. The accessories — collets, chuck, and Multifix — are new. Spindles, nuts, bearings, belts, and wipers have been renewed. You are welcome to inspect this machine under power at our premises and see its condition for yourself.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Turning diameter: 330 mm Turning length: 750 mm Control unit: WEILER D 1 Centre height: 165 mm Distance between centres: 750 mm Max. swing over cross slide: 160 mm Spindle bore: 42 mm Spindle speeds: 1 - 4500 rpm Spindle head: DIN 55027 size 5 Cross slide travel: 180 mm Tsdpswi Ugqsfx Abljd Feeds X-axis: mm/rev Feeds Z-axis: mm/rev Rapid traverse X-axis: 5 m/min Rapid traverse Z-axis: 10 m/min Feed force X/Z-axis: 3000 / 6000 N Tailstock quill taper: MK 3 Tailstock quill diameter: 50 mm Tailstock quill stroke: 110 mm Total power requirement: 10 kW Machine weight approx.: 1.3 t Machine dimensions (L x W x H): 1.8 x 1.2 x 1.7 m Accessories: 3-jaw chuck SCHUNK 0 mmø, quick-change toolpost, coolant system

Sąlyga: naudotas, Gamybos metai: 1986, Swing over bed: 320 mm Swing over cross slide: 198 mm Turning length: 650 mm Total power requirement: 2.2 kW Machine weight approx.: 650 kg Tsdpfx Aboufud Djled Space requirement approx.: 1700x1000x1700 mm Digital readout: 3-axis digital display Bar capacity: Ø 40 mm Spindle speed range: 96 - 2500 rpm Spindle nose: A 2 - 5 Feed range: 0.007 - 0.63 mm/rev Thread cutting capability: Metric 0.25 - 8 mm, Inch 80 - 2 TPI, Diametral Pitch threads 200 - 5 DP, Module 0.2 - 4 Tailstock: MT 3 3-jaw chuck: 160 mm Multifix quick-change toolpost: Type B

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2007, Universal lead and feed screw lathe Manufacturer: WEILER Model: Primus VC Year of manufacture: 2007 – overhauled Newly painted RAL 7035 light grey Machine no.: CK17 Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm With warranty Geometric inspection with test protocol Tsdpfx Ajv D Ip Njblod Accessories: - 3-axis digital readout SIEMENS - Chuck guard with electrical interlock - Motor with brake - Quick change tool post base size A - Bed stop - Covered lead and feed screw - Chip backsplash - Removable chip tray - Operating manual - Used, as seen -

Sąlyga: geras (naudotas), Lead and Feed Screw Lathe Weiler Condor VS 2 Technical Data: Center Height: 160 mm Distance Between Centers: 800 mm Spindle Bore: 40 mm Bed Width: 240 mm Spindle Speeds: 12 - 2800 rpm Drive Power: 3 kW Tailstock Taper: MK 3 Quill Travel: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (LxWxH), approx.: 1930 x 880 x 1470 mm Equipment: 3-jaw chuck Quick-change tool post system Multifix size A incl. 1 tool holder Electrically interlocked chuck guard Retrofitted brake motor Bed stop Emergency stop push button Coolant system Machine lamp Chip guard at rear ELESTA 3-axis digital readout Live center The machine has been technically inspected and is in very good condition. Backlash cross slide: 0.2 mm Backlash compound slide: 0.15 mm Inspection under power possible at any time. Tjdpfx Asu E H Iwebled Price net ex works, loaded from stock

Gamybos metai: 2010, Sąlyga: beveik kaip naujas (naudotas), We offer the following accessories for the Weiler E30 lathe: 1 piece Schunk faceplate, 250 mm – Price: €600 Spindle mount DIN 55027, size 5 2 pieces Röhm faceplate, 260 mm – Price per item: €650 Spindle mount DIN 55027, size 5 1 piece steady rest – Price: €450 2 pieces drive flanges – Price per item: €210 Todpfsgabvnjx Abled Spindle mount DIN 55027, size 5 All items are in very good condition.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe with 2-Axis Heidenhain Digital Readout from Training Workshop!!! Technical Specifications: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg Tjdpfx Abeu Afqljlod >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Included Accessories and Features: >> 2-axis digital readout by Heidenhain >> 1 new 125 mm three-jaw chuck with 2 sets of jaws >> New collet chuck with new collets ranging from 3 mm to 25 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Rear splash guard About this Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. Naturally, the machine is fully operational. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and can achieve ground-like surface finishes. Take the opportunity to view the machine under power on-site and convince yourself of its condition.

Sąlyga: geras (naudotas), Gamybos metai: 2014, gręžimo pajėgumas: 60 mm, veleno tvirtinimas: MK 5, Manufacturer: WEILER MAS Model: VOM 50 Year of Manufacture: 2014 Specifications Metric US Standard Arm Length: 1250 mm Max. Drilling Diameter in Steel: 50 mm Max. Tapping Diameter: M48 Quill Stroke: 350 mm Max. Distance Spindle to Table: 1555 mm Min. Distance Spindle to Table: 305 mm Spindle Speed: 800 rpm Tedjwpkr Nepfx Abljd Tool Mount: ISO 5 / BT / MK Column Diameter: 400 mm Dimensions (Estimated) Length: 3200 mm Width: 1325 mm Height: 2970 mm Weight: 6750 kg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contract terms. We recommend verifying all important details.

Sąlyga: geras (naudotas), Gamybos metai: 1996, Weiler Lathe Model Condor B Centre height: 165 mm Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle nose: DIN 55027 Size 5 Tedpsvbwd Rjfx Abled Spindle bore: 40 mm Spindle taper: Morse taper 5 Connected load: 3 kW Spindle speed: 22–2800 rpm Tailstock taper: MT 3 Weight: 1040 kg 3-jaw chuck 4-jaw chuck Multifix B quick-change tool post Live centre

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1990, Universal lead- and feed-screw lathe Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 1990 – overhauled Newly painted RAL 7035 light grey Machine no.: 90-160-2054 Todpfohy Tdyjx Ablod Center height: 160 mm Distance between centers: 650 mm Geometric acceptance with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i T - Covered lead and feed screw - Braked drive motor - Coolant system - Electrically interlocked chuck guard - Size A quick-change toolholder - Simple bed stop - Chip guard rear wall - Operating instructions With warranty Used, as seen The machine is technically at the level of its year of manufacture.

Sąlyga: naujas, Praktikant VC plus The new standard in conventional precision lathes. High-quality, energy-efficient, precise, and universally applicable for production, training, and further education. This machine impresses with: future-oriented technology maximum accuracy durability user-friendly ergonomics minimal footprint and a wide range of accessories. The consistent and innovative further development of the proven Praktikant series offers an economical and intelligent solution for your daily applications. Technical data: Tsdehw N Ntopfx Ablod WORKING AREA Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Distance between centres: 650 mm SPINDLE Spindle nose DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 43 mm Front bearing spindle diameter: 70 mm MAIN DRIVE Drive power 60%/100% duty cycle: – / 8 kW Speed range: 25 – 5,000 rpm Number of speeds: infinitely variable FEED RANGE Number: infinitely variable Longitudinal: 0.01 – 6 mm/rev Cross: 0.003 – 2 mm/rev THREADING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 40 mm Quill stroke: 85 mm Morse taper DIN 228: MT 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER screen display WTS 15 VC plus - Large, clear 15" touchscreen, pivoting and swiveling, resolution 1366 x 768 - Change operating masks via swipe gestures - Operating functions accessible via app manager - Control panels can be freely configured, positioned, and scaled - Drawings/sketches can be imported from PDF files via USB interface and individually zoomed - Video-assisted machine maintenance - Context-sensitive help menu (instead of WEILER VC plus screen display) - Coolant unit, 18 litres, incl. coolant pump The machine is located in our showroom at 71334 Waiblingen-Beinstein and is available immediately. For detailed information about equipment and configuration, please contact us.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Centre distance: 650 mm Centre height: 160 mm Spindle bore: 40 mm Speed range: 48 – 2,500 rpm Tailstock: MT 3 Drive power: 2.4 / 3 kW Weight: 680 kg Dimensions: 1,600 x 750 x 1,290 mm Paint finish: RAL 6011 (reseda green) Digital readout: 3-axis Fagor Accessories: Further accessories available on request! We are also pleased to offer this machine fully reconditioned! Tsdpfjwc Sh Esx Abljd

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, Leadscrew and feed rod lathe Weiler Condor 81 *Partially Refurbished* Article number: 04-03-141 Manufacturer: Weiler Excellent overall condition Machine partially refurbished Delivery time: on request – subject to prior sale Year of manufacture: approx. 1986 L x W x H: approx. 2000 x 1000 x 1700 mm Weight: approx. 900 kg Digital display: 3-axis SINO digital readout *New* Specifications: Max. turning diameter over bed: approx. Ø340 mm Max. turning diameter over cross slide: approx. Ø185 mm Max. turning length: approx. 800 mm Bar capacity: approx. Ø42 mm Spindle: Speed range: approx. 30-2800 rpm Spindle nose: A 2-5 Drive power: approx. 3.0 kW Automatic longitudinal and face feed: Feed range: approx. 0.016–0.50 mm/rev Suitable for threads: Metric: 0.18–28 mm Inch: 80–1 tpi Diametral pitch: 200–2 3/4 DP Module: 0.1–9 Tailstock: MT3 Accessories: 3-axis SINO digital readout *New* 3-jaw chuck 160 mm *New* Quick-change tool post size E + 1 tool holder Bed stop Work lamp *New* Coolant system *New* Complete documentation Emergency stop Various chuck keys Machine feet Electrical chuck guard *New* Leadscrew and feed rod cover *New* Drill chuck *Optional* Live center *Optional* Further quick-change tool holders *Optional* Further accessories on request Tjdpfxowl At Ds Abled Price and additional technical data on request

Sąlyga: naudotas, Gamybos metai: 1985, Weiler Praktikant 140 lathe, year of manufacture 1985, three-jaw chuck, Multifix toolpost. The Z-axis guideway shows slight wear in the front section. The machine is in good, ready-to-use condition. Can be demonstrated under power by arrangement. Tsdpfxsv N Awfe Abljd

Sąlyga: naudotas, Gamybos metai: 1970, Weiler lathe with tailstock Tsdpfx Aehtnu Tobled

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1974, Universal lead and feed screw lathe Brand: WEILER Model: Commodor Year of manufacture: 1974 – overhauled newly painted RAL 7035 light grey Machine no.: 0068 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: 56 mm with warranty Geometric acceptance with inspection protocol Tedjmgaddspfx Abljd Accessories: - 3-axis digital readout FAGOR Innova 30i-T, new - Chuck guard with electrical interlock - Quick-change tool post size B - Simple bed stop - Coolant system - Operating manual - used, as seen -

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, Lead and Feed Screw Lathe Weiler Commodor *Partially Refurbished* Item number: 04-03-117 Manufacturer: Weiler Very good overall condition Machine partially refurbished Delivery time: on request – subject to prior sale Year of manufacture: approx. 1991 L x W x H: approx. 2200 x 1200 x 1800 mm Weight: approx. 1500 kg Digital readout: 3-axis digital readout Sino *New* Specifications: Max. turning diameter over bed: approx. Ø380 mm Max. turning diameter over cross slide: approx. Ø190 mm Max. turning length: approx. 1000 mm Bar capacity: approx. Ø56 mm Spindle: Speed range: approx. 25–2000 rpm Spindle nose: A 2-6 Drive power: approx. 4.0 kW Automatic longitudinal & cross feeds: Feed range: approx. 0.011–0.80 mm/rev Thread cutting capability: metric 0.30–10 mm, inch 80–2 3/4 G/'' diametral pitch 80–5.5 DP, module 0.2–5 Tailstock: MT4 Accessories: 3-axis digital readout SINO *New* 3-jaw chuck 200 mm *New* Quick-change tool post size B + 1 toolholder Bed stop Work lamp *New* Coolant system *New* Complete documentation Emergency stop Various chuck keys Machine feet Electrical chuck guard *New* Leadscrew and feed rod cover *New* Drill chuck *Optional* Live center *Optional* Collet chuck system 173E *Optional* Collet set 173E *Optional* Further quick-change tool holders *Optional* Additional accessories on request Tedpfx Aowf Dhpebled Price and further technical data on request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, Lead and Feed Screw Lathe Weiler Commodor *Partially Refurbished* Item Number: 04-03-111 Manufacturer: Weiler Very good overall condition Machine partially refurbished Delivery time: on request - subject to prior sale Year of manufacture: approx. 1991 L x W x H: approx. 2200 x 1200 x 1800 mm Weight: approx. 1500 kg Digital Readout: 3-axis Sino digital readout *New* Specifications: Max. Swing over bed: approx. Ø380 mm Max. Swing over cross slide: approx. Ø190 mm Max. Turning length: approx. 1000 mm Bar capacity: approx. Ø56 mm Spindle: Speed range: approx. 25–2000 rpm Spindle nose: A 2-6 Drive power: approx. 4.0 kW Automatic longitudinal & cross feeds: Feed range: approx. 0.011–0.80 mm/rev Threading capability: Metric 0.30–10 mm Imperial 80–2 3/4 TPI Diametral pitch threads 80–5.5 DP Module 0.2–5 Tailstock: MT4 Accessories: 3-axis SINO digital display *New* 200 mm 3-jaw chuck *New* Quick-change tool post size B + 1 insert Bed stop Work light *New* Tedpfxjvkv Iyo Ablsd Coolant system *New* Complete documentation Emergency stop Various chuck keys Electrical chuck guard *New* Drill chuck *Optional* Live center *Optional* Lead and feed screw cover *Optional* Collet chuck system 173E *Optional* Collet set 173E *Optional* Additional quick-change tool holders *Optional* Additional accessories available on request Price and further technical details on request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, Lead and Feed Screw Lathe Weiler Praktikant 160 *Partially Overhauled* Article number: 04-03-218 Manufacturer: Weiler Delivery time: on request Tedpohd Uubjfx Ablsd Very good overall condition Machine partially overhauled Delivery time: on request – subject to prior sale Year of manufacture: approx. 1993 L x W x H: approx. 1700 x 1000 x 1700 mm Weight: approx. 650 kg Digital readout: 3-axis digital display Sino *New* Dimensions: Max. swing over bed: approx. Ø320 mm Max. swing over cross slide: approx. Ø198 mm Max. turning length: approx. 650 mm Bar capacity: approx. Ø40 mm Spindle: Speed range: approx. 96–2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2 kW Automatic longitudinal & facing feeds: Feed range: approx. 0.007–0.63 mm/rev Suitable for threading: Metric 0.25–8 mm; Inch 80–2 tpi Diametral pitch threads 200–5 DP; Module 0.2–4 Tailstock: MT3 Accessories: 3-axis digital readout SINO *New* 3-jaw chuck 160 mm *New* Quick-change tool holder size A + 1 insert Bed stop Work lamp *New* Coolant system *New* Complete documentation Emergency stop Various chuck keys Machine feet Electrical chuck guard *New* Leadscrew and feedscrew cover Drill chuck *Optional* Live center *Optional* Collet device 386E *Optional* Collet set 386E *Optional* Additional quick-change tool holders *Optional* Further accessories on request Price and further technical data on request