Weiler Primus Vc pirkti naudotą (180)

Sąlyga: naudotas, Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Weiler Primus VC tekinimo staklės, pagamintos 1999 m., su 3 ašių Siemens skaitmeniniu indikatoriumi, trijų žandikaulių griebtuvu, Multifix įranga, galiniu purslų apsauginiu ir elektrine griebtuvo apsauga. Staklės geros darbinės būklės, pagal susitarimą galima parodyti prijungtas prie elektros. Itsdpfxsx Afvgo Abker

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, Weiler Primus VC Precision Centre Lathe with 3-Axis Digital Readout K&C NEW with VC Drive, Infinitely Variable Spindle Speeds and CE Certified, in Very Good Condition Technical Data: >> Year of manufacture: 2003 Machine No.: 646 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 800 kg >> Switchable spindle brake >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis digital readout K&C NEW >> Collet chuck system with collets from 3 to 26 mm, new, 1 mm increments, NEW >> 160 mm three-jaw chuck with 2 sets of jaws >> Multifix size A quick-change tool post with 2 holders >> Electric chip guard >> Machine feet >> Splash guard Isdpfx Absw Idlloketr About the Machine: Offered is a Weiler Primus VC lead and feed screw lathe, year 2003, in very good original condition. This is a very well maintained lathe with VC drive and infinitely variable speed of the work spindle. The K&C digital readout and linear scales are brand new. This newer generation of Weiler lathes is very user-friendly and enables the production of ground-like surface finishes. The K&C digital readout makes working even easier and more precise. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Sąlyga: geras (naudotas), Gamybos metai: 2000, Weiler Primus VC, Year of manufacture: 2000, Digital readout, Centre distance: 500 mm, Max. swing over cross slide: 150 mm, Spindle speed up to 4,000 rpm, Spindle bore: 40 mm, Spindle drive: 1.5 kW, Multifix tool post, 24 longitudinal feeds, Itedpfx Abov Ifxijksr Metric threads, Inch threads,

Sąlyga: naudotas, Gamybos metai: 1999, Swing diameter 150 mm Turning length 500 mm Total power requirement 4 kW Machine weight approx. 0.8 t O F F E R We can offer you, without obligation and subject to prior sale and errors, ex stock: W E I L E R LZS - Universal Lathe with Digital Readout Type PRIMUS VC Year of manufacture 1999 _____ Centre height 140 mm Max. turning diameter over cross slide 150 mm Max. swing diameter over bed 280 mm Distance between centres 500 mm Spindle bore 40 mm Stepless speed 30 - 4,000 rpm Isdjvm Dv Depfx Abkotr 24 longitudinal feeds 0.02 - 0.63 mm/rev 24 facing feeds (longitudinal feeds x 8) 0.006 - mm/rev Metric threads mm/pitch Inch threads 80 - 2 TPI Module threads Module Spindle drive 1.5 kW Total drive 4 kW - 380 V - 50 Hz Weight 800 kg Accessories / Special equipment • SIEMENS 3-axis digital readout with X-axis, Z-axis and incremental Z-axis (compound slide) • Multifix-A quick-change toolpost • Equipped with a 3-jaw chuck from WEILER 140 mm, mounted • Machine base with tool storage, integrated control cabinet, cooling system • Operating manuals Condition : very good – ready for demonstration Ideal for training workshops Delivery : ex stock – as inspected Payment : strictly net on collection – after receipt of invoice We look forward to your order. Further lathes of all sizes available from stock – please enquire.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2007, Universal lead and feed screw lathe Manufacturer: WEILER Model: Primus VC Year of manufacture: 2007 – overhauled Newly painted RAL 7035 light grey Machine no.: CK17 Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm With warranty Geometric inspection with test protocol Accessories: - 3-axis digital readout SIEMENS - Chuck guard with electrical interlock - Motor with brake - Quick change tool post base size A - Bed stop Iodpfxev D Ip Ns Abkotr - Covered lead and feed screw - Chip backsplash - Removable chip tray - Operating manual - Used, as seen -

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, veleno skylė: 40 mm, centro aukštis: 140 mm, tekėjimo ilgis: 500 mm, veleno greitis (maks.): 4 000 aps./min, veleno greitis (min.): 30 aps./min, sukimosi greitis (maks.): 4 000 aps./min, sukimosi greitis (min.): 30 aps./min, Įranga: sūkių greitis be galo kintamas, Distance between centers: 500 mm Center height: 140 mm Spindle bore: 40 mm Speed: 30 - 4000 rpm Weight: approx. 800 kg Isdevnr E Nspfx Abkjtr Dimensions: approx. 1430 x 935 x 1550 mm Accessories: Operating manual, lamp, Multifix tool holder, collet chuck (at extra charge) Additional accessories available on request

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 864, centro aukštis: 140 mm, plotis centre: 500 mm, Machine from the insolvency of an automotive supplier – machine is currently still in operation! TECHNICAL DETAILS Digital display: available Control: Siemens Sicomp IMC 05 Center height: 140 mm Center distance: 500 mm Clamping system Three-jaw chuck: available Quick-change toolholder: available Itjdsv N Inispfx Abker Tailstock Type: available Further information according to manufacturer – no guarantee Center distance: 500 mm Center height: 140 mm Swing diameter over bed: 280 mm Swing diameter over cross slide: 150 mm Main spindle Spindle nose per DIN ISO 702-3: Size 5 Front bearing spindle diameter: 70 mm Spindle bore: 43 mm Internal taper depth of main spindle: 50 mm Main drive Drive power (100% duty cycle): 4 kW Speed range: 30 – 4,000 rpm Number of gears: 1 Number of speed ranges: stepless Feed drive Number of feeds: 24 Feed range longitudinal / cross: 0.02 – 0.63 mm/rev / 0.006 – 0.2 mm/rev Thread cutting range Metric threads: 0.25 – 8 mm Inch threads: 80 – 2 TPI Tailstock Quill diameter: 40 mm Quill stroke: 85 mm Quill taper: MT 3 Machine dimensions Length x width x height: 1,570 x 890 x 1,700 mm Weight: 1,050 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Weiler Primus VC Präzisions-Drehmaschine Baujahr: 2011 Technische Daten Drehdurchmesser: 250 mm Drehlänge: 500 mm Spitzenhöhe: 140 mm Umlaufdurchmesser über Planschlitten: 280 mm Max. Umlaufdurchmesser über Querschlitten: 150 mm Hauptspindel: Drehzahlbereich – Hauptspindel: 30 – 4.000 min⁻¹ Leistung: 4,0 kW Anzahl der Gangstufen: 1 Spindelaufnahme: Größe 5 / DIN 55027 Spindeldurchmesser im vorderen Lager: 70 mm Spindelbohrung: 40 mm Durchlass (Stangendurchlass): 40 mm Werkzeughalter: System: MultiFix B Werkzeugquerschnitt: 20 x 20 mm Reitstock: Pinolenhub: 85 mm Pinolendurchmesser: 40 mm Reitstockkegel: MK 3 Vorschübe: Anzahl der Vorschübe: 24 Längsvorschub: 0,02 – 0,63 mm/U Quervorschub: 0,006 – 0,2 mm/U Gewindeschneiden: Metrisch: 0,25 – 8 mm Zoll: 80 – 2 1/” Verfahrwege: X-Achse (Querschlittenverstellung): 150 mm Z-Achse über Querschlitten: 500 mm Z-Achse über Oberschlitten: 110 mm Gesamtanschlusswert: 15 kVA Maschinengewicht: ca. 800 kg Platzbedarf: 1400 x 935 x 1550 mm Zubehör/Optionen: - Dokumentation - 3-Backenfutter Ø 160 mm, mit Backen - 4-Backenfutter Ø 160 mm, mit Backen Itodpfx Ajw Ebdbebkor - Spannzangenfutter inkl. Spannzangen - Reitstock - Multifix-Werkzeughalter, mit Haltern - Mitlaufende Lünette - Wechselräder - Verschiedenes Werkzeug - Lista Werkzeugschrank - Ersatzteile - usw. Unter Strom in unserem Lager.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: Itodpfou Aftgsx Abker >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speeds: 60 - 3000 rpm, 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 (MT 2) >> Feeds: 0.03 to 0.15 mm/rev >> Available threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A quick-change tool post with 3 holders >> Stop >> Change gears About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. The Weiler also runs quietly at high speeds. The Primus was located in a training workshop. This newer generation of Weiler lathes is highly user-friendly and can produce surface finishes comparable to grinding. You are welcome to inspect the machine under power on site to verify its condition.

Sąlyga: paruoštas naudoti (naudotas), Weiler Primus tekinimo staklės Tikslumo tekinimo staklės su priedais Iedpfjxw R N Ujx Abkotr Weiler Primus tekinimo staklės: Centro aukštis: 125 mm Sūkių diapazonas: 40–3000 aps./min Centro atstumas: 400 mm Špindelio anga: 24 mm Priedai: 35 vnt. spaustuvinių taurių Žandikaulinis griebtuvas 4 vnt. Multifix laikikliai Priedų spinta Papildoma įranga – žiūrėkite nuotraukas Kviečiame atvykti apžiūrėti staklių vietoje. Taip pat galime padėti suorganizuoti ekonomišką transportavimą per ekspedicijos įmonę! Jūs gausite sąskaitą faktūrą. Užsienio klientams galima išrašyti sąskaitą be PVM. Būtina turėti galiojantį PVM mokėtojo kodą. Parduodama su galimybe parduoti kitam. Apsilankykite mūsų parduotuvėje ir peržiūrėkite kitus mūsų pasiūlymus. Nurodyti prekių ženklai ir įmonių pavadinimai priklauso jų savininkams ir naudojami tik produktų identifikavimui bei aprašymui. Techninių duomenų neatitikimai ar aprašymo klaidos galimi ir pasiliekami.

Gamybos metai: 1986, Sąlyga: naudotas, Weiler Primus lathe, year of manufacture approx. 1986, three-jaw chuck, Multifix toolpost. The machine is in good condition and can be demonstrated under power by appointment. Iedpfjn Ard Dex Abkstr

Sąlyga: labai geros būklės (naudotas), Torno paralelo WEILER modelo PRIMUS Distancia entre puntos: 400 mm Diámetro máximo sobre bancada: 250 mm Diámetro máximo sobre carro: 130 mm Diámetro del husillo: 24 mm Torreta Multifix tipo A Plato de 3 garras Ø 155 mm Roscados: Métrico + Whitworth Contrapunto CM2 Visualizador de cotas HEIDENHAIN ND522 Avances automáticos en 2 ejes Cuadro eléctrico nuevo Se entrega con: 1 plato de 4 garras Ø 155 mm, 4 portaherramientas, 1 portabrocas Tensión: 380 V Dimensiones (L x An x Al): 1300 x 900 x 1900 mm Isdpfx Absxnp I Dokjtr Peso: aprox. 500 kg Máquina en MUY BUEN ESTADO

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Speed range: 60 - 3,000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Equipment and Accessories: >> 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electric spindle guard About the Machine: Iedpfx Ajvtp Edjbkjtr Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all move very smoothly and evenly. The Weiler also runs quietly at high speeds. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for the production of ground-like surface finishes. Take the opportunity to view this machine under power on-site and see its condition for yourself.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: Itsdpfx Aovivmyobkor >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm in 1 mm steps, new About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages move smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced to a near-ground finish. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, For sale: Weiler lathe, model Primus LZ-GS. The machine is in very good condition. Technical specifications: Year of manufacture: 1989 Machine No.: 4443 Iedpfx Ajihig Isbkotr Operating voltage: 380 V Centre height: 120 mm Centre distance: 430 mm Spindle speed: 60 – 3,000 rpm in 18 gear steps Spindle bore: 23 mm Short taper spindle nose DIN 55027 Tailstock: Morse taper 2 Feed range: 0.03 to 0.15 mm/rev Thread cutting capability: metric, inch, module, and diametral pitch threads Metric thread pitches: 0.25 to 2.5 mm Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Prices are subject to VAT. Viewing by appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase and sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Sąlyga: geras (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 5088, veleno skylė: 25 mm, veleno greitis (maks.): 3 000 aps./min, veleno greitis (min.): 60 aps./min, bendras aukštis: 1 300 mm, bendras ilgis: 1 200 mm, bendras plotis: 800 mm, bendras svoris: 700 kg, WEILER PRIMUS GS kreipiamoji ir traukos sraigtinė tekinimo staklė - Darbinė įtampa: 380 V Itsdpox Ekm Ejfx Abksr - Valdymo įtampa: 220 V - Galia: 2 kW - Nominali srovė: 4,1 A - Dažnis: 50 Hz - Centro ilgis: 450 mm - Centro aukštis virš lovos: 130 mm - Tekinimo skersmuo virš lovos: 260 mm - Centro aukštis virš vežimo: 70 mm - Tekinimo skersmuo virš vežimo: 140 mm Staklės komplektuojamos su užveržimo grioveliu, Multifix įrankių laikikliu ir trijų žandų griebtuvu (RÖHM gamintojas), Ø 120 mm, komplektuojant su tinkama dirbtuvių spintele ir atitinkamais priedais. Prekė iš mokomosios dirbtuvės. FCA D-73235 Weilheim Teck, pakrauta ant sunkvežimio.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus tekinimo staklės puikios būklės. Galima apžiūrėti prijungus prie elektros. Techniniai duomenys: Atstumas tarp centrų: 450 mm Centro aukštis: 120 mm Veleno skylė: 23 mm Itedpfjx Htf Hsx Abkor Sukimosi greitis: 30 – 3000 aps./min. Galinis centras: MK 2 Variklio galia: 1,5 kW Svoris: 350 kg Matmenys: 1200 x 650 x 1550 mm

Sąlyga: geras (naudotas), Gamybos metai: 2012, tekėjimo skersmuo: 360 mm, VALDYMAS .. CNC valdymas FUNKCIONALUMAS .. Kryžminių slankių skaičius: 1 DARBO SRITIS - TEKINIMAS - .. Didžiausias apdirbimo skersmuo: 360 mm .. Maksimali ruošinio ilgis: 800 mm PAGRINDINIS VERPTUVAS .. Sukimosi greičio diapazonas nuo: 25 /min .. Sukimosi greičio diapazonas iki: 4000 /min ELEKTROS PRIJUNGIMO DUOMENYS .. Įtampa: 400 V .. Dažnis: 50 Hz MATMENYS / SVORIS .. Bendras svoris apie: 1400 kg Itjdpfox Ewd Dox Abkjr 25 x 25 įrankių laikiklis

Sąlyga: geras (naudotas), Atstumas tarp centrų: 450 mm Centro aukštis: 120 mm Velena anga: 23 mm Sukimosi greitis: 40 – 3000 aps./min. Bežingsnis pavara su 3 pavarų žingsniais ir skaitmeniniu greičio indikatoriumi Galinis centras: MK 2 Itedsw I A Uxopfx Abksr Pavaros galia: 1,5 kW Svoris: 350 kg Matmenys: 1200 x 650 x 1330 mm Dažymas: Resedos žalia RAL 6011 Skaitmeninis rodmuo: Pageidaujant už papildomą kainą Priedai: Papildomi priedai pagal užklausą

Sąlyga: naudotas, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture: approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Itsdpfjrtd Uwjx Abkjr Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and facing Chuck flange: Short taper DIN 55022 size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox ranges - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change toolholder with 1 changeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centre point for collet chuck - Emergency stop - Hinged chuck guard - Splash guard panel - Machine lamp - Electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H: 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus GS Lead and Feed Screw Lathe with 3-axis Digital Readout Easson-ES8 from Training Workshop – Excellent Condition! Technical Data: - Year of manufacture: approx. 1990, Machine No. 3768 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm, 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock taper: Morse 2 (MK2) - Feeds: 0.03 to 0.15 mm/rev - Capable of cutting metric, imperial, module, and diametral pitch threads - Metric thread pitches from 0.25 to 2.5 mm - Weight: approx. 360 kg - Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Features: - 3-axis digital readout by Easson ES8 - Collet system from 1 to 20 mm, collets increasing by 1 mm increments, with chuck and draw tube - 1 three-jaw chuck with 2 sets of jaws Itedpfx Abevkfhpjksr - 1 four-jaw chuck with 2 sets of jaws - Multifix tool post, size A, with 3 tool holders - Bed stop - Faceplate turning attachment About the Machine: For sale is a Weiler Primus lead and feed screw lathe built approx. 1990, in excellent condition. The machine is, of course, fully functional. The carriage moves very smoothly and evenly. The bed guides are in a very good condition. The lathe runs quietly, even at high speeds. The machine comes from a large company's training workshop. This newer generation of Weiler lathes is very user-friendly and allows for the creation of ground-like surface finishes. Take advantage of the opportunity to inspect the machine on site under power and convince yourself of its condition.

Sąlyga: labai geros būklės (naudotas), WEILER PRIMUS tipas MD-G - Centrų aukštis: 125 mm - Atstumas tarp centrų: 400 mm - Sukimosi greičio diapazonas: 40–3000 aps./min - Špindelio skersmuo: 24 mm - Elektrinis griebtuvo apsaugos įtaisas - Multifix su įdėklais - Galinė atrama su gręžimo cilindru - Keturių žandikaulių griebtuvas - Darbo šviestuvas Itodpfxsxw H Dbs Abker - Staklių lovos ribotuvas - Dokumentacija Matmenys: Ilgis x plotis x aukštis: 1,3 x 0,8 x 1,6 metro / Svoris: 450 kg Galimi netikslumai ir įvedimo klaidos.

Sąlyga: naujas, Gamybos metai: 2025, CONDOR VC plus The new dimension in the field of conventional precision lathes. A high-quality, powerful, and energy-efficient precision lathe designed for high-productivity use in production and toolmaking, as well as in vocational training and education. High-quality, energy-efficient, precise, and universally applicable for production, training, and continuing education. Key features include: - Future-oriented technology - Maximum accuracy - Long service life - User-friendly ergonomics - Minimal space requirements - Extensive range of accessories The consistent and innovative further development of the well-established Condor series is an economical and intelligent solution for your daily operations. Technical Data: WORKING AREA Itjdjqwipnjpfx Abkjr Center height: 180 mm Swing over bed: 360 mm Swing over cross slide: 190 mm Distance between centers: 800 mm MAIN SPINDLE Spindle nose DIN 55027 / DIN ISO 702-3: Size 6 Spindle bore: 57 mm Spindle front bearing diameter: 90 mm MAIN DRIVE Drive power 60 % / 100 % duty cycle: – / 10.5 kW Speed range: 25 – 4,000 rpm Number of speeds: infinitely variable FEED RANGE Number: infinitely variable Longitudinal: 0.01 – 6 mm/rev Transverse: 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MT 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER WTS 15 VC plus screen display - Large, clear 15" touchscreen, rotatable and swiveling, resolution 1366 x 768 - Change operating screens by swiping - Operating functions accessible via app manager - Control panels can be freely configured, positioned, and scaled - Import of drawings/sketches from PDF files via USB interface, individually zoomable - Video-supported machine maintenance - Context-sensitive help menu (instead of WEILER VC plus screen display) The machine is available for immediate delivery and can be viewed at our showroom in 71334 Waiblingen-Beinstein. For details regarding equipment, please contact us.

Sąlyga: geras (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, Weiler Praktikant VC Precision Lathe Manufacturer: Weiler Model: Weiler Praktikant VC Precision Lathe Year of Manufacture: 2008 Condition: Used, very good, serviced and inspected according to factory specifications with inspection report Technical Details Turning diameter: 250 mm Turning length: 650 mm Centre height: 160 mm Itedpoxd Tknsfx Abksr Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main Spindle: Speed range – main spindle: 30 – 4,000 rpm Drive power – main spindle: 10 / 6.0 kW Gear stages: 1 Spindle nose: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool Post: System: MultiFix B Turning tool shank cross-section: 20 x 20 mm Tailstock: Quill stroke: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread Cutting: Metric: 0.25 – 8 mm Imperial: 80 – 2 1/” Module: 0.25 – 4 mm Travel: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel range: 180° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirement: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC Precision Lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix toolholder – 8x machine feet – Original tool set

Sąlyga: naudotas, Swing over bed: 250 mm Swing over cross slide: . mm Centre distance: approx. 400 mm Centre height: approx. 125 mm Itedjwa Dz Eepfx Abkjr Speed range: 80 - 3000 rpm Number of speed steps: 18 Spindle bore: 24 mm Tailstock quill taper: MT 3 Weight: approx. 400 kg Dimensions: approx. 1200 x 650 x 1300 mm Four-jaw chuck diameter: 125 mm Including Röhm four-jaw chuck, Ø 125 mm, including hard and soft jaws; Collet chuck system including collets 1-20 mm with 1 mm increments; Multifix size A with 3 tool holders; Chuck guard with interlock.