LATHE

Weiler Primus

Sąlyga: naudotas, Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Weiler Primus VC tekinimo staklės, pagamintos 1999 m., su 3 ašių Siemens skaitmeniniu indikatoriumi, trijų žandikaulių griebtuvu, Multifix įranga, galiniu purslų apsauginiu ir elektrine griebtuvo apsauga. Staklės geros darbinės būklės, pagal susitarimą galima parodyti prijungtas prie elektros. Ijdpfsx Afvgsx Afwsa

Gamybos metai: 1990, Sąlyga: naudotas, Pressure: 75 t Throat depth: 300 mm Stroke: 8 - 110 mm Table size: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Passage opening in table: 250 x 150 mm Ram bore: 40 mm Strokes per minute: 60 + 90 spm Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram at bottom stroke, ram down: 19 mm Distance table/ram at top stroke, ram up: 380 mm Equipment: - with hydraulic clutch-brake combination, new hydraulics and oil cooler - with gear drive in oil bath - fixed table prepared for attaching tool change consoles - 2 roller rails in table - mechanical overload in ram (shear plate) The following work will be carried out on the machine / partial refurbishment: - Machine will be completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine will be repainted - New Balluff cam switchgear - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication - New control cabinet with touch panel and ABB safety control - Current safety inspection (German UVV) including brake time measurement Iodpfed Nl E Uex Afwea

Sąlyga: paruoštas naudoti (naudotas), Weiler Primus tekinimo staklės Tikslumo tekinimo staklės su priedais Weiler Primus tekinimo staklės: Centro aukštis: 125 mm Sūkių diapazonas: 40–3000 aps./min Centro atstumas: 400 mm Špindelio anga: 24 mm Priedai: 35 vnt. spaustuvinių taurių Žandikaulinis griebtuvas 4 vnt. Multifix laikikliai Priedų spinta Papildoma įranga – žiūrėkite nuotraukas Kviečiame atvykti apžiūrėti staklių vietoje. Taip pat galime padėti suorganizuoti ekonomišką transportavimą per ekspedicijos įmonę! Jūs gausite sąskaitą faktūrą. Užsienio klientams galima išrašyti sąskaitą be PVM. Būtina turėti galiojantį PVM mokėtojo kodą. Parduodama su galimybe parduoti kitam. Iedpexw R N Usfx Afwja Apsilankykite mūsų parduotuvėje ir peržiūrėkite kitus mūsų pasiūlymus. Nurodyti prekių ženklai ir įmonių pavadinimai priklauso jų savininkams ir naudojami tik produktų identifikavimui bei aprašymui. Techninių duomenų neatitikimai ar aprašymo klaidos galimi ir pasiliekami.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speeds: 60 - 3000 rpm, 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 (MT 2) >> Feeds: 0.03 to 0.15 mm/rev Iodou Aftgjpfx Afwoa >> Available threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A quick-change tool post with 3 holders >> Stop >> Change gears About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. The Weiler also runs quietly at high speeds. The Primus was located in a training workshop. This newer generation of Weiler lathes is highly user-friendly and can produce surface finishes comparable to grinding. You are welcome to inspect the machine under power on site to verify its condition.

Sąlyga: naujas, Table length: 1200 mm Table width: 1200 mm Table height: 900 mm Table load capacity: 3000 kg Machine weight approx.: 0.32 t Dimensions (L x W x H): 1.2 x 1.2 x 0.9 m Welding table / perforated table: Ijdpfx Aed Iinfjfwja Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Plasma nitriding provides a hard surface layer. Height adjustable from approx. 880 to 980 mm Base reinforced with ribs for added strength. Including floor bearing Accessories optional!!!

Sąlyga: labai geros būklės (naudotas), WEILER PRIMUS tipas MD-G - Centrų aukštis: 125 mm - Atstumas tarp centrų: 400 mm - Sukimosi greičio diapazonas: 40–3000 aps./min - Špindelio skersmuo: 24 mm - Elektrinis griebtuvo apsaugos įtaisas - Multifix su įdėklais - Galinė atrama su gręžimo cilindru - Keturių žandikaulių griebtuvas - Darbo šviestuvas - Staklių lovos ribotuvas Ijdpfexw H Dbsx Afwsa - Dokumentacija Matmenys: Ilgis x plotis x aukštis: 1,3 x 0,8 x 1,6 metro / Svoris: 450 kg Galimi netikslumai ir įvedimo klaidos.

Sąlyga: naudotas, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture: approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and facing Chuck flange: Short taper DIN 55022 size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Isdsrtd Uwepfx Afwoa Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox ranges - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change toolholder with 1 changeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centre point for collet chuck - Emergency stop - Hinged chuck guard - Splash guard panel - Machine lamp - Electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H: 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Sąlyga: naujas, Bernardo Lead and Feed Screw Lathe Master 180 including 3-axis digital readout Centre Distance: 1000 mm Centre Height: 180 mm Swing Over Bed: 360 mm Swing Over Gap*: 480 mm Swing Over Cross Slide: 220 mm Bed Width: 185 mm Spindle Bore: 51 mm Spindle Mount: DIN 55029, D1-5 Spindle Speed Range: (8) 70 – 2000 rpm Longitudinal Feed Range: (32) 0.052 – 1.392 mm/rev Cross Feed Range: (32) 0.014 – 0.380 mm/rev Metric Threads: (26) 0.4 – 7.0 mm Inch Threads: (34) 4 – 56 TPI Tailstock Quill Diameter: 42 mm Tailstock Quill Travel: 110 mm Tailstock Taper: MT 4 Motor Output S1 100%: 1.5 kW (400 V) Motor Input S6 40%: 2.2 kW (400 V) Machine Dimensions (W x D x H): 1920 x 750 x 1600 mm Approximate Weight: 540 kg * Removable gap length: 225 mm Scope of Delivery: • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Face plate 200 mm / D5, per DIN 55029 • Fixed steady rest – max. passage diameter 70 mm • Travelling steady rest – max. passage diameter 50 mm • Coolant system • Initial fill with Shell Tellus 46 • Pull-out chip tray • Clamping plate 320 mm • Four-way tool post • Safety guard for four-way tool post • Safety slip clutch • Micrometric longitudinal stop • Thread chasing dial • LED machine lamp • Reducing sleeve • Change gears • 2 centre points • Foot pedal with brake function (CE compliant) Ijdjd Du Tijpfx Afwsa • Motor with electromagnetic brake (CE standard) • Machine stand

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Speed range: 60 - 3,000 rpm in 18 gear steps >> Spindle bore: 23 mm Iodpfjvtp Edox Afwja >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Equipment and Accessories: >> 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electric spindle guard About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all move very smoothly and evenly. The Weiler also runs quietly at high speeds. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for the production of ground-like surface finishes. Take the opportunity to view this machine under power on-site and see its condition for yourself.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus GS Lead and Feed Screw Lathe in Very Good Original Condition!!! Technical Data: >> Year of manufacture: approx. 1992 Machine No. 4549 >> Centre height: 120 mm >> Centres distance: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle head DIN 4 >> Tailstock taper: MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> Collet chuck set - new collets, new from 3 to 25 mm >> 1 three-jaw chuck with 2 sets of jaws >> Multifix toolpost system size A with 2 tool holders About the Machine: Iedowkh Abepfx Afwja For sale is a Weiler Primus GS lead and feed screw lathe in very good original condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. The bedways are in very good condition. Even at high spindle speeds, the Weiler runs very quietly. The Primus was used in a training facility. This newer generation of Weiler lathes is very user-friendly and allows for the production of ground-like surface finishes. You are welcome to view and test the machine under power on site to convince yourself of its condition.

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 240 mm, veleno skylė: 58 mm, tekinimo skersmuo virš slankiojančio stalo: 430 mm, centro aukštis: 215 mm, tekėjimo ilgis: 760 mm, plunksnos brūkšnys: 127 mm, quill skersmuo: 58 mm, bendras ilgis: 1 885 mm, bendras plotis: 810 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 20 aps./min, lovos plotis: 300 mm, bendras svoris: 1 680 kg, quillo laikiklis: MK 4, Centre height: 215 mm Ijdpfxjcir Anj Afwoa Centre distance: 760 mm Spindle bore: 58 mm Spindle nose: DIN 55029 Camlock D6 Motor power: 5.5 kW Spindle speed range: 20–2000 rpm Weight approx. 1680 kg Equipment includes: - Hardened and precision-ground Z-axis guideways - Turcite coatings (on mating surfaces) of the tool and cross slides - Manual central lubrication with a pump for the saddle and cross slide - Complete coolant system with rear splash guard and carriage splash protection - Chuck guard - Feed rod with 3 adjustable cams - Machine lamp - Fixed centre - Set of machine leveling pads

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus GS Lead and Feed Screw Lathe with 3-axis Digital Readout Easson-ES8 from Training Workshop – Excellent Condition! Technical Data: - Year of manufacture: approx. 1990, Machine No. 3768 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm, 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock taper: Morse 2 (MK2) - Feeds: 0.03 to 0.15 mm/rev - Capable of cutting metric, imperial, module, and diametral pitch threads - Metric thread pitches from 0.25 to 2.5 mm - Weight: approx. 360 kg - Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Features: - 3-axis digital readout by Easson ES8 - Collet system from 1 to 20 mm, collets increasing by 1 mm increments, with chuck and draw tube - 1 three-jaw chuck with 2 sets of jaws - 1 four-jaw chuck with 2 sets of jaws - Multifix tool post, size A, with 3 tool holders - Bed stop - Faceplate turning attachment About the Machine: Isdpfx Aovkfhpjfwoa For sale is a Weiler Primus lead and feed screw lathe built approx. 1990, in excellent condition. The machine is, of course, fully functional. The carriage moves very smoothly and evenly. The bed guides are in a very good condition. The lathe runs quietly, even at high speeds. The machine comes from a large company's training workshop. This newer generation of Weiler lathes is very user-friendly and allows for the creation of ground-like surface finishes. Take advantage of the opportunity to inspect the machine on site under power and convince yourself of its condition.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm in 1 mm steps, new About the machine: Isdevivmyepfx Afwoa Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages move smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced to a near-ground finish. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Sąlyga: naudotas, Swing over bed: 250 mm Swing over cross slide: . mm Centre distance: approx. 400 mm Centre height: approx. 125 mm Speed range: 80 - 3000 rpm Number of speed steps: 18 Spindle bore: 24 mm Tailstock quill taper: MT 3 Weight: approx. 400 kg Dimensions: approx. 1200 x 650 x 1300 mm Four-jaw chuck diameter: 125 mm Including Röhm four-jaw chuck, Ø 125 mm, including hard and soft jaws; Isdpswa Dz Eofx Afwsa Collet chuck system including collets 1-20 mm with 1 mm increments; Multifix size A with 3 tool holders; Chuck guard with interlock.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, Weiler Primus VC Precision Centre Lathe with 3-Axis Digital Readout K&C NEW with VC Drive, Infinitely Variable Spindle Speeds and CE Certified, in Very Good Condition Technical Data: >> Year of manufacture: 2003 Machine No.: 646 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 800 kg >> Switchable spindle brake >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Iedjw Idllepfx Afwoa Accessories and Equipment: >> 3-axis digital readout K&C NEW >> Collet chuck system with collets from 3 to 26 mm, new, 1 mm increments, NEW >> 160 mm three-jaw chuck with 2 sets of jaws >> Multifix size A quick-change tool post with 2 holders >> Electric chip guard >> Machine feet >> Splash guard About the Machine: Offered is a Weiler Primus VC lead and feed screw lathe, year 2003, in very good original condition. This is a very well maintained lathe with VC drive and infinitely variable speed of the work spindle. The K&C digital readout and linear scales are brand new. This newer generation of Weiler lathes is very user-friendly and enables the production of ground-like surface finishes. The K&C digital readout makes working even easier and more precise. Take the opportunity to inspect this machine under power on site and see the condition for yourself.