Vitrinų Gamyba pirkti naudotą (6 410)

Būklė: labai geros būklės (naudotas), CATALOG NUMBER 7816 TECHNICAL DATA DDCA - Maximum workpiece length: 85 mm - Minimum workpiece width: 180 mm - Maximum workpiece width: 845 mm - Minimum workpiece height: 10 mm - Maximum workpiece height: 45 mm - Spindle diameter: 30 mm - Maximum saw blade diameter: 250 mm - 5 spindles: Ljdoyyy Egopfx Aauoaa - Left side: 1) Upper vertical spindle 2.2 kW 2) Lower horizontal spindle 2.2 kW - Right side: 1) Lower vertical spindle 2.2 kW 2) Upper vertical spindle 2.2 kW 3) Lower horizontal spindle 2.2 kW - Spindles adjustable up/down, right/left - Material hold-downs: 2 units - Stepless feed speed adjustment: 0–10 m/min - Spindle diameter: 5 x 100 mm - Dimensions (L/W/H): 1870/2230/1320 mm DDGA - Maximum workpiece width: 130 mm - Maximum workpiece height: 100 mm - Spindle configuration: 1) Bottom 5.5 kW 2) Right 5.5 kW 3) Left 5.5 kW 4) Top 5.5 kW - Spindles adjustable up/down - 6-knife cutterheads mounted on top and bottom spindles - Spindle diameter: 40 mm - Right and left spindles equipped with milling cutters, maximum diameter 50 mm - Spindle diameter: 30 mm - Two feed speeds: 4.9 kW - Central chain lubrication with oil pump - Spindle diameter: 4 x 125 mm - Dimensions (L/W/H): 3100/1300/1700 mm ADVANTAGES - Polish manufacturing - 5 spindles - Unpainted - Very good condition - Used production line - High quality, low price Net price: 52,900 PLN Net price: 12,600 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Būklė: labai geros būklės (naudotas), Catalog number: 7817 TECHNICAL DATA DDCA – Double-end Tenoner - Min. workpiece width: 180 mm - Max. workpiece width: 850 mm - Min. workpiece height: 10 mm - Max. workpiece height: 45 mm - Spindle diameter: 30 mm - Max. saw blade diameter: 250 mm - 4 saw blades included 5 spindles: left side: 1) vertical upper - 2.2 kW 2) horizontal lower - 2.2 kW right side: 1) vertical lower - 2.2 kW 2) vertical upper - 2.2 kW 3) horizontal lower - 2.2 kW - Spindles adjustable vertically/horizontally - Material hold-down – 2 pcs - Stepless feed speed adjustment: 0–10 m/min - Central lubrication by oil pump - Pump motor: 2.2 kW - Extraction port diameter: 5x100 mm - Overall dimensions (L/W/H): 1900 x 2230 x 1530 mm DDGA – Four-sided Planer - Max. workpiece width: 130 mm - Max. workpiece height: 10–60 mm - Min. workpiece length: 200 mm Spindle arrangement: 1) bottom – 5.5 kW 2) right – 5.5 kW 3) left – 5.5 kW 4) top – 5.5 kW - Spindles adjustable vertically - Top and bottom spindle diameter: 40 mm - Right and left spindle diameter: 30 mm - 4 feed speeds: 13 / 20 / 26 / 40 m/min - Central chain lubrication by oil pump - Extraction port diameter: 4x120 mm - Overall dimensions (L/W/H): 3200 x 1370 x 1830 mm DBCA – Tenoner Infeed Conveyor Lodpfsyz Nr Sex Aaueaa - Max. feed speed: 40 m/min - Max. workpiece width: 150 mm - Motor: 0.55 kW - Overall dimensions (L/W/H): 2320 x 600 x 1150 mm DBGA – Lath Feeder - Lath length: 200–600 mm - Lath width: 30–120 mm - Lath thickness: 10–40 mm - Stepless feed speed adjustment: 10–40 m/min - Motor: 0.75 kW - Overall dimensions (L/W/H): 1500 x 500 x 980 mm - Total weight: approx. 4900 kg – Polish manufacture – DTR technical documentation included – 5 spindles – Not repainted – Very good condition – Used machine Net price: PLN 63,900 Net price: EUR 15,200 depending on exchange rate (4.2 EUR/PLN) (Prices may change with higher fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used for informational purposes only to enable identification of the goods. We only resell goods previously placed on the market by the manufacturer. We have no business ties with the manufacturer.

Būklė: labai geros būklės (naudotas), Katalogo numeris 7732 TECHNINIAI DUOMENYS - spaudimo jėga: hidraulinė - briketų forma: apvali - briketo skersmuo: 70 mm - bunkerio skersmuo: 1200 mm - našumas: apie 70 kg/h - automatinis mašinos veikimas - variklis: 7,5 kW - maks. darbinis slėgis: 150 bar - atsiurbimo jungtis: 90 mm - filtro maišo angos skersmuo: 500 mm - maks. maišo aukštis: 900 mm - matmenys (ilgis/plotis/aukštis): 1950x1400x2700 mm - svoris: 1130 kg PRIVALUMAI – itališka gamyba – galima tiesiogiai prijungti prie pjuvenų ištraukimo sistemos – naudota briketavimo mašina – DTR dokumentacija – labai gera būklė Grynoji kaina: 29 900 PLN Laedpfx Aasyfhiieusa Grynoji kaina: 7 120 EUR pagal 4,2 EUR kursą (Kainos gali keistis esant didesniems svyravimams)

Būklė: labai geros būklės (naudotas), Dešrelių gamybos linija Handtmann 226 su nuėmimo įrenginiu. Ledjy D T Nmspfx Aausaa

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 12 h, įėjimo įtampa: 380 V, įėjimo srovė: 200 A, įvesties srovės tipas: trifazis, Įranga: CE žymėjimas, 1. Materiaalihissipöytä liikkuvalla ketjumekanismilla. Korkeussäädettävä, minimi 0,8 m, maksimi 1,4 m, sähköinen käyttö. 3 kW, pituus 4 m. 2. Suuri rullasilppuri kaksoisterällä, halkaisija 1,8 m, syvyys 1,9 m, 380 V, 30 kW. 3. Liitäntäpiste lukituksella irtomateriaalin syöttämiseksi murskausmyllyyn. 4. Vasaramyllyturbiini, 380 V, 35 kW. Laedpew Ulp Eofx Aausa 5. Murskatun raaka-aineen sekoitin säädettävällä syöttöluukulla. Tilavuus 4,8 m³, 380 V, 2,2 kW. 6. Suuri vaakasuuntainen granulaattori automaattisella voitelujärjestelmällä ja ohjelmoitavalla roottorin automaattivoitelulla. Lisäjäähdytys granulaattorirenkaisiin sekä hienopölyn poisto. Suurin kapasiteetti 3 t/h, 380 V, 90 kW. 7. Pieni liikuteltava kuljetushihna, leveys 38 cm, pituus 2 m, 380 V, 0,5 kW. 8. Suuri kuljetinhihna pääventtiilillä, leveys 38 cm, pituus 6 m, 380 V, 1,5 kW. 9. Pelletinjäähdytin syklonilla hienopölyn keräämiseen ja pääventtiilillä. Suurin kapasiteetti 3,5 t/h, 380 V, 3 kW. 10. Seula/värisevä pöytä seulotun materiaalin keräimellä ja ruuvinsyöttimellä. 380 V, 1,5 kW. 11. Pitkä seulontasylinteri seulaverkolla, pituus 3 m, 380 V, 1,5 kW. 12. Kuljetinhihna syötöllä pakkausasemalle. Pituus 4,2 m, 380 V, 0,75 kW. 13. BIG BAG -pakkausyksikkö kalibroiduilla vaaoilla, toleranssi ±5 g / 1 t. 14. Ruuvikuljetin materiaalin syöttämiseen automaattipakkauskoneeseen. Pituus 5 m, halkaisija 27,5 cm, 380 V, 3 kW. 15. Automaattinen pakkauskone pussinompelulla ja PVC-pussien suljennalla. Mukana myös automaattinen etikettikuljetinpöytä. Maksimikapasiteetti 4,2 t/h paineilmakompressorilla. 16. Uusi puoli-sähköinen 3 t lavavaunu.

Gamybos metai: 2017, būklė: labai geros būklės (naudotas), HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS TECNAU LIBRA 800 Application: Suitable for pagination and processing of short print runs and single books (“books of one”) with varying sizes, page counts, and covers. Performance from print run 1; up to 800 copies per hour Book format: min.: 100 x 125 mm / max.: A4 Thickness: min.: 2 mm / max.: 60 mm Equipment / Further details: Line configuration: 1. Roll-fed input: unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks from 2-up prints. 2. Sheet feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must be the same size and print run as the book block to be processed. Lasdpfx Aasylyhdsuoa 3. Feed to binding machine: Station for manual feeding of pre-assembled book blocks, transfer via reading station, book turner module, and loading robot at the binding machine. 4. Variable binding machine for the production of books with softcover. The binding machine is equipped with PUR application on the book spine and hot melt glue on the book sides. 5. Softcover cover machine, configured with cover sheet feeder: Pre-printed cover sheets are fed in, trimmed at the front, side trimmed and creased to the correct size to match the thickness of the respective book block. 6. Cooling tower/cooling conveyor (specific to product) not included in delivery Can be ordered as per customer requirements (product type). The cooling conveyor can be configured to suit spatial conditions and requirements at the machine’s installation location. The price of the conveyor depends on its configuration. We will be happy to advise you in selecting the appropriate conveyor. 7. Variable three-knife trimmer, suitable for trimming books of varying three-dimensional sizes with different cover types. 8. Software for plant control Finishing line The entire process is controlled via 2D Datamatrix codes. Via the code, the system receives clearance for the following automatic settings and workflow management: • Information about book dimensions and inserts (quantity and sequence) • Setup of the binding machine (spine position, thickness, and length) • Cover preparation: softcover → creasing, trimming, edge trimming • Correct book-to-cover assignment • Three-knife trimmer (knife positions are set automatically to book dimensions) Very good condition // Dismantling, packaging of the machine, and securing (insurance of the machine during transport) will be carried out by the manufacturer / Tecnau.

Būklė: labai geros būklės (naudotas), Professional industrial robot from the renowned manufacturer SHINI, designed for automation of production processes – primarily for removing parts from injection molds and handling components. This device is used in the plastics industry (injection molding machines), ensuring fast and repeatable work cycles, thereby increasing production efficiency. The robot is equipped with a handheld controller (teach pendant) enabling programming of movements and automatic operation mode. Technical specifications: • Manufacturer: SHINI Plastics Technologies • Model: S-530-V-2KM7-CE • Year of manufacture: 2017 • Power supply: 230V (single-phase) • Frequency: 50 Hz • Power: 30 W • Load capacity / Application: robot for light-duty applications (part removal from molds) • Arm reach: approx. 550 mm • Pneumatic gripper (operating pressure: 2–10 bar) • Manual control + AUTO mode Lajdpfx Aaey Duzqsuja • Complete wiring set • Weight: approx. 62 kg Equipment included: • SHINI robot • Handheld controller (programmer) • Pneumatic gripper • Cables and installation • Documentation (visible in the photos) Condition: Used – normal signs of wear. Technically fully operational and ready for use. Additional information: • Sold exactly as shown in the photos • Inspection before purchase possible • Pallet shipping available Applications: • Plastic injection molding machines • Production automation • Part removal • Pick & place

Būklė: naudotas, PARDUODAME ŠIUOS ĮRENGINIUS: Ekstruderis 60 x 25D – 2 vnt. Laedpfx Aaey Duzdsusa Ekstruderis 25 x 25D Ekstruderis 45 x 25D Ekstruderis 60 x 35D, putų sraigtas su CO2 siurbliu Dvigubas ekstruderis 30 x 2 x 20D Įranga putų sintetiniams vyno kamščiams gaminti Aušinimo vonia 10 m – 2 vnt. Traukiklis ir pjaustytuvas Fleron iki 20 m/min ir 1000 pjūv./min – 3 vnt. (FLERON) BELAFORM PJAUSTYMO ĮRENGINYS

Gamybos metai: 2025, būklė: naujas, SPIRAL TUBE MACHINE Metformer MTR1500 Designed for the production of round SPIRO-type ducts. The produced duct complies with DIN EN 12237, BS, and Eurovent standards. Sheet metal decoiling device with vertically adjustable brake Forming strips for tube production Fast, burr-free cutting with rotary disc cutters Touchscreen LCD control Essential automatic lubrication system Automatic angle control Automatic shearing during tube production Lsdpfxop T Smls Aaujaa Remote access and control Reporting system (daily-weekly-monthly production quantities) Automatic error detection. METFORMER POLAND

Būklė: naudotas, Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 202624208-100, liuko vieta: priekis, įėjimo įtampa: 460 V, This offer concerns the Alfa Laval SRU6/260 industrial pump, manufactured in 2019. The pump is engineered for demanding industrial applications, with a specified displacement of 2.60 liters per revolution and a maximum nominal capacity of approximately 93.6 m³/h. It operates at a maximum rotational speed of 600 rpm and can handle differential pressures up to 10 bar for stainless steel LS/HS versions or up to 20 bar for Duplex LD/HD variants. The pump connections are sized at DN100 (4 inches) and allow for the transfer of solid particles up to 18 mm in diameter. Laodpfey Am I Tjx Aauoa All product-wetted components are made of AISI 316L stainless steel (W. 1.4404) or, optionally, Duplex steel, with a standard surface finish of Ra ≤ 0.8 µm. The pump is equipped with three-lobe rotors as standard, with the option for two-lobe rotors to handle larger particles. Shaft sealing includes single mechanical seals (R90), double-flushed mechanical seals, or packed gland seals. Available elastomers are EPDM (standard), with NBR or FPM as options. The pump unit includes an electric motor and gearbox supplied by NORD DRIVESYSTEMS. The motor is a SK 132SP/4 TF model rated at 5.50 kW, while the gearbox is type SK 33-132SP/4 TF, providing a torque of 276 Nm. The motor operates at 1465 min⁻¹ at 50 Hz and 1770 min⁻¹ at 60 Hz, with IE3 efficiency ratings of 90.9% and 91.7% respectively. Both motor and gearbox date from 2019 and show minor surface soiling and wear consistent with regular use. The pump is mounted on a steel baseframe fitted with adjustable feet and wheels, facilitating mobility and installation. The front stainless steel casing features two threaded pipe connections. The pump body is painted blue and shows signs of rust and paintwear, while the stainless steel housing presents minor water droplets and small signs of use but no significant damage. The equipment is currently stored indoors on a concrete floor against a wall. The Alfa Laval SRU6/260 pump is a reliable choice for demanding industrial applications, combining robust construction with versatile sealing and rotor options, complemented by a high-performance motor and gearbox assembly.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Weinig gamybos linija CONTUREX C 125, pagaminimo metai 2018. Ledpfxey Emrks Aausaa

Būklė: labai geros būklės (naudotas), Mažai naudotos automatinės TC, TU, TZ profilių gamybos staklės, Skirtos gaminti, valcuoti TC, TU, TZ profilius iki 1.5 mm metalo storio. Techninė specifikacija Laedpfx Aaox Sx R Sjuea Pagaminta: Estijoje Reguliuojamas profilio aukštis: 100 – 250 mm Profilio kraštinė: 50 mm Profilio kraštinės užlenkta: 15 mm Minimalus valcuojamo lakšto storis: 1 mm Maksimalus valcuojamo lakšto storis: 1.5 mm Atstumas tarp volų: 300 mm Staklių matmenys: 900 x 4000 mm Staklės neturi giljotinos, perforavimo volų. Valdymas paprastas, dviem knopkem. Jei turėsite daugiau klausimų, mielai atsakysime.

Gamybos metai: 2011, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Majonezo gamybos linija Įranga paruošta darbui Talpa: 400 L Dvigubos sienelės: +6 bar Parametrai nuotraukoje Laedpfx Aaeyc E Nzouoa Linija dar neišmontuota, veikė gamykloje iki jos uždarymo. Linijos gamybinis pajėgumas – 650 kg/val. aukšto riebumo kokybei, maksimali našumo riba – 900 kg/val. Linijoje dvi išpilstymo stotelės: viena kibirams, kita mažoms talpykloms. Turiu naudojimosi instrukciją lenkų ir anglų kalbomis. Kviečiu apžiūrėti ir kitus mano skelbimus.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, veikimo valandos: 1 400 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: JR20231210-4, bendras ilgis: 13 000 mm, ryšulio plotis: 1 560 mm, Galinio veleno greitis (maks.): 200 aps./min, Sveiki, rankšluosčių gamybos mašina, Z ir V tipai – moderniausia Lenkijoje. Gamina rankšluosčius Tork, Katerina, Merida dozatoriams. Servetėlės kartoninėse dėžutėse, Tork dozatoriams. Mašina gali daryti visus sulankstomus Z ir V tipo gaminius. Būgno plotis iki 156 cm. Dėl kitų klausimų skambinkite, nes privalumų yra daug. Turiu platų naujų ir naudotų Z ir V tipo rankšluosčių mašinų asortimentą. Komplekte yra pakavimo stalas, vertė – 27 tūkst. Pjovimo mašina – 28 tūkst. Perdirbimo laikas – 1 t per 2 val. – tokios mašinos Europoje nėra. Laodpoyzh T Uefx Aauea

Būklė: naudotas, Gamybos metai: 2006, mašinos/transporto priemonės numeris: 105554, We are offering this used Weinig Conturex window production line, year of manufacture 2006. Machine number: 105554 Machine type: Conturex Year of manufacture: 2006 Circuit diagram number: FP 3013 Supply voltage: 3×400 V Supply frequency: 50 Hz Control voltage: 230 V Control frequency: 50 Hz Control voltage: 24 V Control frequency: 0 Hz Main fuse: 139 A Current capacity: 160 A Power: 61 kW For any questions or if you require additional information, please send us a message or contact us by phone. CNC machining centre for processing wooden profiles (windows, doors, etc.). Additional linear tool magazine (120 positions). Two 4-axis machining heads for simultaneous operation (20kW). Automatic loading and unloading tables. Optionally, a comprehensive tool package is available for purchase (tool holders, angle heads, profile cutter heads). The machine is currently in continuous use. The machine was purchased in 2024 after thorough overhaul. Since then it has worked 15 months on a single shift basis. Technical data: Working range: Minimum width: 25 mm Maximum width: 260 mm Minimum height: 10 mm Maximum height: 150 mm Minimum length: 180 mm Maximum length: 4500 mm The maximum working length is achieved by multiple repositioning of the workpiece in the clamp. Milling spindle no. 1: Number of axes: 4 Motor power S1: 20 kW Spindle speed range: 0 – 18,000 rpm Rotation direction: right / left C-axis: yes Feed rates: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450°/s Auxiliary magazine for milling spindle no. 1: - magazine type: disc - magazine capacity: 18 tools - holder spacing: 100 mm - max tool weight: 10 kg - max total tool weight: 130 kg - tool holder type: HSK F 63 Milling spindle no. 2: Motor power S1: 20 kW Spindle speed range: 0 – 18,000 rpm Rotation direction: right / left C-axis: yes Feed rates: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450°/s Auxiliary magazine for milling spindle no. 2: - magazine type: disc - magazine capacity: 18 tools - holder spacing: 100 mm - max tool weight: 10 kg - max total tool weight: 130 kg - tool holder type: HSK F 63 External magazine: - magazine type: linear - magazine capacity: 120 tools - holder spacing: 80 mm - tool holder type: HSK F 63 Ledpfx Aaeyu Sn Uoueaa Loading table: transverse, automatic Unloading table: transverse, automatic CNC control: PLC control: Siemens S7 Mobile control panel Controller computer: - operating system: Microsoft Windows - modem for data transfer and diagnostics - touchscreen display Siemens Sinumerik 840 D Number of axes: 4 The machine is fully operational and currently in continuous production. For an additional fee, a comprehensive package of accessories is available: 8 angle heads, a set of 3 standard holders, a set of 17 new arbors for cutter heads.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, DREW-BET (KAROLEX) paletų gamybos linija Aptarnaujama 3 darbuotojų Našumas iki ~200 vnt./val. Pagaminimo metai: 2013 – labai gera būklė Galima naudoti nereguliuoto ilgio lentas, kas žymiai pagreitina gamybą. Linijoje įrengtos dvi obliavimo staklės (išilginė ir skersinė) Lsdpfx Aaey D Ucheusaa Linijos komplektaciją sudaro: - Pravažiuojamas viniavimo įrenginys - Ilginio frezavimo/obliavimo staklės - Kampų obliavimo staklės - Perkėlimo stalas - Skersavimo obliavimo staklės - Apvertimo įrenginys - Sukroviklis - Sandėlis - Grandininis atliekų transporteris po visa linija Visa linija pilnai veikianti, prijungta prie elektros. Labai greitas išardymas ir transportavimas (visa įranga telpa į 2 sunkvežimius).

Gamybos metai: 2004, būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Each line consists of: • Main extruder: BA105 AMUT, year of manufacture 2004 • Single-screw co-extruder: ROYAL EUROPA (Canada), year of manufacture 2005 • Pneumatic raw material conveying system • Cooling table with water bath (AMUT NERG10, 10 m), year 2004 • Puller-saw unit (TP25, 7 m), year 2004 • Discharge table Laodpfeyc R Aaox Aauoa _____ TECHNICAL DATA – BA105 AMUT Extruder • Screw: Ø105 mm, length 24 L/D • Type: PCD90WEF; VBM105-24-007 • Speed range: 2.66 ÷ 26.6 • Screw material: alloy steel 41CrAlMo7, hardness 1000 HV • Gearbox: ratio 1:65.6 R • Thrust bearing: 1,400,000 N • Barrel heaters: 42.92 kW (7 heating zones, 4 cooling) • Main motor: 60 kW, 1750 rpm • Degassing: 2.2 kW pump, 30 m³/h, vacuum 700 Hg _____ TECHNICAL DATA – ROYAL EUROPA Co-Extruder • Type: 253-100-000, pillar-mounted • Screw: Ø1¾", length 21D, compression ratio 2:1, dual-flighted • Screw and barrel material: AISI 4140 steel • Bimetallic barrel: Ø3" O.D. / Ø1¾" I.D. • Screw hardness: 50–52 RC Gearbox: • Type: ROSSI RCI 100 U03A • Ratio: 1:15.2 + belt 1:1.65 (total 1:25) • Belt type: 3VX600 (4 pcs) Heating and Cooling: • Heating power: 8.9 kW • Heaters: 4+1 • Cooling: 1/16 HP, 4 fans Motor: • POWERTEC Frame 215 TC • Power: 10 HP • Speed range: 0–1750 rpm Technical condition: Both lines are complete and fully operational Ready for profile production with layer co-extrusion Possible sale of one or both lines – depending on buyer's requirements On-site demonstration possible. Documentation and photos available. It is possible to purchase a single line for €80,000.00

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Liniją sudaro: -Pagrindinis ekstruderis: BA130 (Cobra), pagaminimo metai 2008 -Koekstruderis: CM65, pagaminimo metai 2008, parduodamas dalimis -Embosseris, aušinimo vonia, viniakalė, traukiklis, perforatorius, giljotina – visi pagaminti 1996 metais TECHNINIAI DUOMENYS – Ekstruderis BA130 (Cobra) -Pagrindinis sraigtas: Ø130 mm, ilgis 26 L/D -Ašių atstumas: 1050 mm -Sraigto medžiaga: XALOY 41CrAlMo7, kietumas 1000 HV -Reduktorius: 1:31:7 R Lodjyc Rtxopfx Aausaa -Ašinė atrama: 2 020 000 N -Statinės pašildytuvai: 74,6 kW (7 šildymo zonos, 6 aušinimo) -Pagrindinis variklis: 205 kW, 1460 aps./min -Vakumo sistema: siurblys 4 kW, 100 m³/h, vakuumas 700 Hg -Dažnų tiekikliai: 2x variklis 2,2 kW, perdavimo santykis 1:25:4 R, sraigto greitis 112 aps./min Techninė būklė: Linija veikianti, paruošta gamybai Konfigūracija leidžia pilnai gaminti dailylentes – nuo granulių iki gatavo profilio Yra galimybė pateikti individualų kainos pasiūlymą ir gyvai pristatyti įrenginį vietoje.

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Fully equipped plastic processing line, including: - Main extruder: BA92 NOVEL - Co-extruder: ROYAL MACHINE, model 253-070-000, column-mounted. Line supplied in sections - Suitable for co-extrusion applications – e.g. multilayer profiles, trims, technical components TECHNICAL DATA – BA92 (NOVEL) Extruder - Screw diameter: Ø92 mm, length 24 L/D - Type: B60S4; VB92-24-005 - Speed range: 3.3 ÷ 33 rpm - Barrel: 34CrAlNi7 steel, 1000 HV hardness - Gearbox: transmission ratio 1:63.4 R - Thrust bearing: 1,170,000 N - Heating zones: 6 - Cooling zones: 4 Ljdpfeyc R U Aex Aaueaa - Drive motor: 63.8 kW DC, 210–2100 rpm - Degassing: 2.2 kW pump, 36 m³/h, vacuum 700 Hg - Feeder: 1.2 kW DC motor TECHNICAL DATA – ROYAL MACHINE Co-extruder - Screw: Ø1¾", length 21D, compression ratio 2:1, two-flight - Material: AISI 4140 steel (bimetallic barrel 2” O.D. x 1¼” I.D.) - Gearbox: ROSSI RCI 80 U03A, ratio 1:16.4 + belt 1:1.65 (total ratio 1:27) - Drive belt: 3VX560 type, 3 pcs - Thrust bearing: load capacity 20,000 kg - Heating: 6.9 kW, 3+1 heaters - Cooling: 1/16 HP, 3 fans - Motor: POWERTEC Frame 184 TC, 5 HP, 0–1750 rpm Technical condition: complete line, in working order, ready for operation Application: plastic processing in co-extrusion processes Technical documentation available on request. Includes additional spare parts.

Būklė: naudotas, susideda iš: automatinio stiklo įtraukimo, gamintojas HEGLA, tipas: ISO, serijos Nr. 2033401055, stiklo plovimo ir džiovinimo stoties, gamintojas LISEC, tipas: VHW-F29/V8, pagaminta 2022 m., serijos Nr. 315117/944, stiklo transportavimo stoties, gamintojas LISEC, tipas: RTVB1527MZU2, pagaminta 2019 m., serijos Nr. 383109341, apžiūros stoties, gamintojas LISEC, tipas: RSV-38/27B, pagaminta 2019 m., serijos Nr. 320-109338, presavimo bloko, gamintojas LISEC, tipas: FPS-35/27U2, pagaminta 2019 m., serijos Nr. 343-109342, rėmų konvejerio, gamintojas LISEC, tipas: FR-400H, pagaminta 2019 m., serijos Nr. 550-109339, kaupimo konvejerio sistemos su sandarinimo įrenginiu, gamintojas LISEC, tipas: VSL-10-27, serijos Nr. 100170 su 2 vnt. kaupimo sekcijų, nuosavas svoris: 4500 kg, taip pat atskira valdymo/spintų sistema su aušinimo sistema, gamintojas RITTAL, valdymo blokas, dozavimo blokas, siurblių ir vožtuvų technika, maksimalus įrenginio darbo aukštis: 2700 mm. Ljdey Aqaajpfx Aausaa

Gamybos metai: 2023, būklė: naudotas, mašinos/transporto priemonės numeris: H300SV23-17, KTP 300 S – tai gamybinis presas su šoniniu traukos pagalvėlės išėmimu, 300 t talpa, 1000 mm eiga, maksimalus įrankio dydis 1400 x 1200 mm, maksimalus įrankio svoris 5 000 kg, elektros jungtis 400V, 50/60Hz, 36kW. Lajdpfsyn Ni Ajx Aauoa

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, Reda STERILDOSE aseptinis dozavimo įrenginys Laedpfx Aasyil A Seuja Gali būti naudojamas kaip aseptinis dozatorius bet kokių komponentų dozavimui į pieną, sultis ir kitus gėrimus Galingumas: 3000 l/val Nauja būklė Matmenys (I×P×A): 2650×1800×2230 mm

Būklė: beveik kaip naujas (naudotas), APV ostekar A-4517, 8.000 L APV ostekar, åben type. 1 stk. til salg. Kapacitet: 8.000 liter Komplet kar i rustfrit stål, inkl. udstyr til omrøring, skæring m.m. Laedpfx Aash D H Uksuoa I fuld funktionsdygtig stand.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 2 500 mm, 1.1 Naudotas Göpfert SRE Maxi 250 1.2 Prekės ženklas: Göpfert 1.3 Modelis: SRE Maxi 250 1.4 Metai: 2004 1.5 Kilmės šalis: Vokietija Ljdjyyuxuspfx Aauoaa 1.6 Z įrankiai (4) Įrankiai rankenėlėms ir pan. 1.7 1 spalvos flekso spaudos agregatas (plotis 2800 mm, 6 kartai) 1.8 Didž. lakšto dydis: 2500x6500 mm 1.9 Didž. spaudos plotas: 2500x2500 mm 1.10 Maž. spaudos plotas: 360x1000 mm 1.11 Konvejerio ilgis: 6000 mm

Būklė: geras (naudotas), Gamybos metai: 2015, Pellet production line with components from Mechanika Nawrocki and Cedrus. The line is equipped with two Mechanika Nawrocki GRB2 750 pellet mills, each with 100 kW motors. Includes two hammer mills, each 250 kW. Features filter cyclones for dedusting, pneumatic and mechanical conveying systems, and dosing bins. Year of manufacture: 2015/16. Individual machines can be purchased separately. Ljdpfxowcdlpo Aaueaa