Vc 999 pirkti naudotą (6 394)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, VC-999 QS8 + VC-999 K8T1A-SP Guedev Iz Hvepfx Acueh ID-Nr. 2922 VC-999 Kammermaschine mit zugehöriger VC-999 Verpackungsmaschine, die zuvor für große ganze Käseblöcke verwendet wurde. Abmessungen: 480 x 190 cm, Höhe 225 cm.

Sąlyga: naudotas, Gamybos metai: 2002, Overview This automatic heat sealing machine for preformed trays is manufactured by INAVEN MASCHINEN AG (VC999), model TS1200 N. It has been specifically designed for vacuum heat-sealing and modified atmosphere packaging, to achieve improved preservation, better presentation, as well as easy storage and transport. The machine automatically performs the MAP cycle, heat sealing, and gas flushing, perfectly trims the film, and automatically collects the film waste. Technical data Length: 4,400 mm Width: 870 mm Height: 1,790 mm Infeed conveyor: 2,700 mm Outfeed conveyor: 1,120 mm Power: 6 kW; Power supply: 400 V, 50 Hz Scope of delivery Tray sealer | VC 999 | TS 1200 | 2002 Guodpetzg H Rjfx Acuoh

Sąlyga: geras (naudotas), Vacuumverpackungsmaschine. Gujdpfx Aowt Tmkecush

Gamybos metai: 2007, Sąlyga: labai geros būklės (naudotas), Vacuum Packaging Machine VC999 07P, year of manufacture: 2007. Connection: 400V. Chamber dimensions approx. 88 x 50 x 15 cm, equipped with 2x CLFH 220 Rietschle vacuum pumps, year of manufacture: 1998, output: 2x 5.5 kW. Very good condition, fully functional. Guedpfxef Srcfe Acuoh

Sąlyga: labai geros būklės (naudotas), Type: VC³ 7034 Heraeus Vötsch Climate Test Chamber with Humidity (Air-Cooled) Test Chamber Dimensions: Width 580 mm x Depth 765 mm x Height 750 mm Housing Dimensions: Width 780 mm x Depth 1758 mm x Height 1800 mm Specifications for Temperature Tests: Temperature range: -70°C to +180°C temporal accuracy: ± 0.1 to ± 0.5 K spatial accuracy: ± 0.5 to ± 1.5 K Temperature change rate according to IEC 60068-3-5 Heating: 3.0 K/min Cooling: 3.0 K/min Specifications for Climate Tests: Temperature range: -70°C to +180°C Temperature deviation in steady state, according to IEC 60068-3-5 depending on test chamber temperature temporal accuracy: ± 0.1 to ± 0.3 K spatial accuracy: ± 0.5 to ± 1 K Humidity range: 10% to 98% RH Electrical connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 4.9 kW Rated current: 16 A Gusdpfx Acoxfh Speujh Fuse: 16 A slow-blow, customer provided Refrigerant: R-404A/R23 Test Chamber Volume: approx. 335 liters Weight: approx. 515 kg net Important Safety Information for Buyers! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Gamybos metai: 2005, Sąlyga: paruoštas naudoti (naudotas), A total of four Engel injection molding machines are available: 1) Engel ES 80/25 HL-V, year of manufacture: 1999. This machine is defective and offered as a source of spare parts. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation is available. Inspection on site is possible. Sale of individual machines is possible. Gusdpfx Acev Extzeujh

Sąlyga: geras (naudotas), Рамка из нержавеющей стали, бункер из нержавеющей стали 50 кг, общая длина 2200 мм, размеры вибрационного транспортёра 2000 мм x 600 мм, мобильный, однофазный. Godpfjgmthcsx Acujuh

Sąlyga: labai geros būklės (naudotas), Heraeus Vötsch Climate Test Chamber We offer you a Heraeus Vötsch climate test chamber. Model: VC³ 0100 Test chamber dimensions (H x W x D): approx. 950 x 1100 x 950 mm TEMPERATURE TESTS: Minimum temperature: -0°C Maximum temperature: +90°C Temperature change rate (cooling): 0.2 K/min Temperature change rate (heating): 0.5 K/min Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature homogeneity: ± 0.5 to ± 1.0 K Gjdpfx Ajn Ard Socueuh Heat compensation at +20°C: 350W CLIMATE TESTS: Minimum temperature: +10°C Maximum temperature: +90°C Dew point temperature range: +4°C to +89.5°C Humidity range: 10 to 98% rH Temporal humidity deviation: ± 1 to ± 3% rH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature homogeneity: ± 0.5 to ± 1.0 K Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.6 kW Rated current: 12 A Refrigerant: R 404A Weight: approx. 1400 kg For your safety as a buyer, please note the following information! The following work is carried out on our chambers in advance: 1. Functionality check and replacement of necessary components 2. Re-filling with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented trial run. Type: VC³ 0100 / Year of manufacture: 2013 Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Gamybos metai: 2007, Sąlyga: paruoštas naudoti (naudotas), Various pre-owned injection molding machines are available: 1) Demag Concept 80/370-200, clamping force: 80 t, screw diameter: 30 mm, year: 2006. 2) Demag Concept 80/370-200, clamping force: 80 t, screw diameter: 30 mm, year: 2006. 3) Demag ET 150/500-610h/120v multi, clamping force: 150 t, screw diameter: 50 mm / 25 mm, year: 2003, operating hours: approx. 100,000 h. 4) Demag ET 150/500-610h/120v multi, clamping force: 150 t, screw diameter: 50 mm / 25 mm, year: 2006, operating hours: approx. 105,000 h. 5) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year: 2006, operating hours: approx. 103,000 h. 6) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year: 2006, operating hours: approx. 103,000 h. 7) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year: 2006, operating hours: approx. 103,000 h. 8) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year: 2006, operating hours: approx. 67,000 h. 9) Engel VC 940/200 electric, clamping force: 200 t, screw diameter: 60 mm, year: 2007, operating hours: approx. 98,000 h. 10) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year: 2006, operating hours: approx. 103,000 h. 11) Demag ET 200-560-840 concept, clamping force: 200 t, screw diameter: 60 mm, year: 2000. 12) Demag ET 200-560-840 concept, clamping force: 200 t, screw diameter: 60 mm, year: 2001. 12) Demag ET 200-560-840 concept, clamping force: 200 t, screw diameter: 60 mm, year: 2002. 13) Engel VC 940/200 electric, clamping force: 200 t, screw diameter: 60 mm, year: 2006, operating hours: approx. 107,000 h. Documentation available. Inspection on site possible. Sale of individual machines possible. Gedpfx Ajv R Ew Djcuouh

Sąlyga: labai geros būklės (naudotas), Heraeus Vötsch Climate Test Chamber We offer here a Heraeus Vötsch climate test chamber. Heraeus Vötsch climate test chamber with humidity control (water-cooled) Test chamber internal dimensions: width 800 mm x depth 800 mm x height 950 mm Housing dimensions: width 1090 mm x depth 1960 mm x height 1995 mm Specifications for temperature testing: Temperature range: -45°C to +180°C time stability: ±0.1 to ±0.5 K spatial uniformity: ±0.5 to ±1.5 K Temperature change rate according to IEC 60068-3-5 Heating: 4.0 K/min Cooling: 3.0 K/min Specifications for climate testing: Temperature range: -45°C to +180°C Temperature deviation at steady state, according to IEC 60068-3-5 depending on the test chamber temperature Temperature range: -10°C to +95°C time stability: ±0.1 to ±0.3 K spatial uniformity: ±0.5 to ±1.0 K Humidity range: 10% to 98% RH Humidity deviation over time: +1 to ±3 Electrical connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 7.8 kW Rated current: 15.0 A Refrigerant: R452A Test chamber capacity: approx. 600 liters Weight: approx. 620 kg net Type: VC³ 4060 For your security as a buyer, the following information! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (See picture) Gujdpsmt Du Tefx Acuoh (Subject to changes and errors in the technical data and specifications!) Feel free to contact us by phone for any further questions.

Sąlyga: labai geros būklės (naudotas), Here we offer a Vötsch climatic test chamber. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Volume: 990 liters Gjdpfoqwim Esx Acujuh Feed-throughs: Ø 125 mm, Ø 50 mm Data for temperature tests: Temperature range: -42°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 Watts Data for climate tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3% RH Heat compensation max.: 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Nominal power: 11.5 kW Nominal current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 For your security as a buyer, please note the following information! The following measures are performed on all of our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon completion of testing, the chambers undergo documented trial operation. Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Climate Test Chamber We offer a Vötsch climate test chamber for sale. Model: VC³ 4100 Air Cooled With temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Volume: 990 liters Port openings: Ø 125 mm, Ø 50 mm Specifications for temperature testing: Temperature range: -42°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature uniformity: ±0.5 to ±1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 watts Specifications for climate testing: Temperature range: +10°C to +95°C Gsdpfx Aceqmn A Noujuh Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature uniformity: ±0.5 to ±1.0 K Temporal humidity deviation: ±1 to ±3% RH Max. heat compensation: 500 W Power supply: 3/N/PE AC 400V ±10% 50Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404 A Weight: approx. 840 kg Type: VC³ 4100 Buyer notice for your safety: The following measures are carried out on all chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Model: VC³ 0100 Gjdpfxetz T D Ae Acusuh Vötsch Climate Test Chamber, Air-Cooled Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Test chamber volume: 990 liters Temperature testing: Minimum temperature: -0°C Maximum temperature: +90°C Temperature change rate cooling: 0.2 K/min Temperature change rate heating: 0.5 K/min Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature homogeneity: ± 0.5 to ± 1.0 K Heat compensation at +20°C: 350 W Climatic tests: Minimum temperature: +10°C Maximum temperature: +90°C Dew point temperature range: +4°C to +89.5°C Humidity range: 10 to 98% RH Temporal humidity deviation: ± 1 to ± 3% RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature homogeneity: ± 0.5 to ± 1.0 K Power supply: 1/N/PE AC 230V±10% 50Hz Rated power: 2.3 kW Rated current: 10 A Refrigerant: R-404A Weight: approx. 1400 kg Important information for you as the buyer for your peace of mind! The following procedures are carried out on our test chambers prior to sale: 1. Functional check and replacement of necessary components 2. New charging with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data and specifications subject to change and errors!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Climate Test Chamber We are offering a Vötsch climate test chamber for sale. Model: VC³ 4100 Air-cooled Temperature change rate: 3 K/min Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Overall dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Volume: 990 liters Ports: Ø 125 mm, Ø 50 mm Specifications for temperature testing: Temperature range: -42°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Guodjqnutmspfx Acuoh Max. heat compensation at +20°C: 4500 watts Specifications for climate testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3% RH Max. heat compensation: 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404 A Weight: approx. 840 kg Type: VC³ 4100 For your security as a buyer, please note the following information! The following procedures are carried out on our chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to technical modifications and errors in data!) For further questions, please feel free to contact us by phone.

Sąlyga: geras (naudotas), Gamybos metai: 1995, veikimo valandos: 9 161 h, Funkcionalumas: visiškai funkcionalus, MIKRON machining center with large tool magazine and a PC with keyboard for direct data transfer. Technical specifications: Travel ranges: X 1,000 mm, Y 600 mm, Z 600 mm Drive power: 22.5 kW at 44% duty cycle Spindle speed: 60-6,300 rpm Spindle taper: SK 40 type B Feed rate: 20 m/min Work table: Dimensions: 980 mm x 580 mm Max. workpiece weight: 550 kg Control system: Heidenhain TNC 426 electronic handwheel HR 336 PC and monitor for data transfer Tool changer: Double-arm gripper Large tool chain magazine with 36 stations Equipment: Full safety enclosure Water and air hand pistol Tool coolant system Chip conveyor Work area lighting Machine data: Space requirement for machine and peripherals (including service areas!): approx. 4,790 mm x 5,331 mm x 2,905 mm (LxWxH) Weight: approx. 6,200 kg Connected load: 400 V, 50 Hz, 75 A, 30 kW The machining center is fully operational. Viewing by appointment is possible at any time. All tools and consumables shown in the photos are not included in the scope of delivery. Guedpfx Acev T Avpoueh Technical changes and errors excepted.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, labai tvirta pavarų dėžė, variklis 1,0 / 1,8 kW Gujdpfx Ajxlzklecujh Pjūklų diskai: 360 mm Lėtaeigis modelis su 6 pjovimo greičiais: 8 / 10 / 12,5 m/min 16 / 20 / 25 m/min Bandomasis pjovimas pas mus pagal šias specifikacijas: Pjovimo našumas 90 laipsnių kampu su 360 mm disku: Apvalus profilis: 110 mm Pilnas apvalus: 80 mm Plokščias profilis: 200 x 80 mm Svoris apie 560 kg

Sąlyga: naudotas, Gamybos metai: 1979, Saw blade diameter: 380 mm Cutting diameter: 135 mm Single stroke adjustment: 700 mm Gsdpfjrw Dkgsx Acujuh Drive power: 1.9 kW Speed: 1500/3000 rpm Machine weight: approx. 1.36 t Space requirements: approx. 2.6 x 1.2 x 1.8 m Simple yet robust semi-automatic cold circular saw - 9 saw blades, Ø 350-370 mm - Minimal quantity lubrication system - Swarf cleaner - Swarf collection box - Cutting speed adjustment via pulleys - Documentation - New counter module

Sąlyga: geras (naudotas), Gamybos metai: 2006, CNC Vertical Machining Center Manufacturer: MAZAK Model: VC-NEXUS 510 C Year of manufacture: 2006 CNC control: Mazatrol PC Fusion CNC 640 M Nexus Working area: Table size (clamping surface): 550 x 1300 mm Maximum table load: 1,200 kg T-slots: 5 units T-slot spacing: 100 mm T-slot width: 18 mm Travel X/Y/Z: 1,050 x 510 x 510 mm Rapid traverse: 36 m/min Feed rate: 1 – 8,000 mm/min Distance spindle nose to table: 150 – 660 mm Working spindle: Speed range: 35 – 12,000 rpm Tool shank: SK40 Main drive power: 18.5 kW Tool magazine: Tool positions: 30 Max. tool diameter: 80 mm With adjacent station free: 125 mm Max. tool length: 350 mm Max. tool weight: 8 kg Gedjttv Uhspfx Acuouh Machine weight approx.: 6,900 kg Machine dimensions approx. L/W/H: 3.00 x 2.85 x 2.85 m Equipment: Tool length measuring system Complete coolant unit Coolant and chip protection Work area lighting 3.5" disk drive Documentation Special equipment: High-pressure coolant through spindle, pump pressure approx. 15 bar Tornado precision boring cycle MAZAK Monitoring System B, Renishaw probe (M10) CROMAR chip conveyor, side discharge 151025ä

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2002, veikimo valandos: 45 312 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 020 mm, Y ašies eiga: 610 mm, Z ašies eigos atstumas: 610 mm, greitas poslinkis X ašimi: 24 m/min, greitas poslinkis Y ašis: 24 m/min, greitasis eiga Z ašyje: 18 m/min, valdiklių gamintojas: Siemens, valdiklio modelis: 840D, ruošinio ilgis (maks.): 1 200 mm, ruošinio plotis (maks.): 600 mm, ruošinio svoris (maks.): 1 000 kg, bendras aukštis: 2 800 mm, bendras ilgis: 2 900 mm, bendras plotis: 2 200 mm, bendras svoris: 6 500 kg, veleno greitis (maks.): 8 000 aps./min, įrankio ilgis: 250 mm, įrankio skersmuo: 120 mm, įrankio svoris: 7 g, įėjimo įtampa: 400 V, įvesties srovės tipas: Oro kondicionierius, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Mašina yra labai geros būklės. Godpfx Acsw U Eireusuh Techniniai duomenys X eiga: 1.020 mm Y eiga: 610 mm Z eiga: 610 mm Valdymas: Siemens 840 D Pagrindinis velenas: Apsisukimų diapazonas – pagrindinis velenas: 60–8.000 min⁻¹ Pagrindinio veleno variklio galia: 12,3 / 18,5 kW Maks. sukimo momentas: 177 Nm Įrankio laikiklis: (SK 40) Veleno guolio skersmuo: 70 mm Darbo stalas: Stalo tvirtinimo paviršius: 1.200 x 600 mm Didžiausia stalo apkrova: 1.000 kg T formos grioveliai: 5x 18 x 125 mm Įrankių keitiklis: Įrankių pozicijų skaičius: 24 Didžiausias įrankio skersmuo: 80 mm Didžiausias įrankio skersmuo su laisva kaimynine vieta: 120 mm Didžiausias įrankio ilgis: 250 mm Didžiausias įrankio svoris: 7,0 kg Keitimo laikas: apie 6,5 sek. Pasiūlos: Greitasis padavimas (X / Y / Z): 24 / 24 / 18 m/min Bendras galios poreikis: apie 30 kVA

Sąlyga: naudotas, Gamybos metai: 2007, spaudimo jėga: 120 kN, darbinio tūrio: 154 cm³, įpurškimo slėgis: 2 175 juosta, bendras svoris: 7 300 kg, darbo valandos: 70 000 h, sraigtinio konvejerio skersmuo: 35 mm, Freight terms: ex location Delivery time: by arrangement Payment terms: 100% payment prior to machine collection, net Manufacturer: Engel Gsdoqy Uklepfx Acusuh Model: VC Tech + ERC23/1-F Condition: from ongoing production Operating hours: approx. 70,000 CLAMPING UNIT: - Clamping force: 120 t Opening stroke: 500 mm Min. mold installation height: 300 mm Max. mold installation height: - Platen dimensions (H x V): 790 x 680 mm Centering rings (nozzle/ejector side): 125/125 mm INJECTION UNIT: SPE330 Screw diameter: 35 mm Shot weight in polystyrene: 141 g Stroke volume: 154 cm³ Injection pressure: 2,175 bar CONTROL: CC200 Screen languages: DE Operator’s manual: DE EQUIPMENT: - Core pulls: 2 Air valves: yes Hot runner control zones: - Robot interface: Engel integrated Additional equipment: incl. ERC 23/1-F with integrated deposit conveyor (operator’s side) +750 mm, needle shut-off (hydraulic + pneumatic), interface for color dosing unit and temperature control unit. GENERAL DATA: - Installed heating power: 9.2 kW Pump drive power: 15 kW Total connected load: motor + heating Total weight: 7,300 kg Overall dimensions L x W x H: 4.4 x 1.4+0.8 x 2.0 m

Sąlyga: naujas, Gamybos metai: 2025, CONDOR VC plus The new dimension in the field of conventional precision lathes. A high-quality, powerful, and energy-efficient precision lathe designed for high-productivity use in production and toolmaking, as well as in vocational training and education. High-quality, energy-efficient, precise, and universally applicable for production, training, and continuing education. Key features include: - Future-oriented technology - Maximum accuracy - Long service life - User-friendly ergonomics - Minimal space requirements - Extensive range of accessories The consistent and innovative further development of the well-established Condor series is an economical and intelligent solution for your daily operations. Technical Data: WORKING AREA Center height: 180 mm Swing over bed: 360 mm Swing over cross slide: 190 mm Distance between centers: 800 mm MAIN SPINDLE Spindle nose DIN 55027 / DIN ISO 702-3: Size 6 Spindle bore: 57 mm Spindle front bearing diameter: 90 mm MAIN DRIVE Drive power 60 % / 100 % duty cycle: – / 10.5 kW Speed range: 25 – 4,000 rpm Number of speeds: infinitely variable FEED RANGE Number: infinitely variable Longitudinal: 0.01 – 6 mm/rev Transverse: 0.003 – 2 mm/rev THREAD CUTTING RANGE Guodpfxsqwipnj Acujh Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MT 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER WTS 15 VC plus screen display - Large, clear 15" touchscreen, rotatable and swiveling, resolution 1366 x 768 - Change operating screens by swiping - Operating functions accessible via app manager - Control panels can be freely configured, positioned, and scaled - Import of drawings/sketches from PDF files via USB interface, individually zoomable - Video-supported machine maintenance - Context-sensitive help menu (instead of WEILER VC plus screen display) The machine is available for immediate delivery and can be viewed at our showroom in 71334 Waiblingen-Beinstein. For details regarding equipment, please contact us.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Fully hydraulic circular saw automatic machine, manufacturer: TRENNJAEGER Technical data: Saw motor, pole-changeable: 1.5 / 2.0 kW Saw blade: 275 mm Gjdpfoxg A Iuex Acujuh 6 cutting speeds: 16, 20, 25 m/min + 32, 40, 50 m/min - Integrated hydraulics - Protective enclosure with safety limit switches - 6 cutting speeds

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Travel paths: 2000 x 550 x 560 mm Spindle mount: BT40 Spindle speeds: up to 12,000 rpm Tool changer: 32 positions Control: FANUC 18i Gsdpfxjrrf Sve Acuouh Tool breakage monitoring Tool length measuring device Partition for pendulum operation Chip conveyor Various accessories MARCELS MASCHINEN CH

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, ENGEL VC 330/180 tech Injection Moulding Machine – Duroplast Robot: ENGEL Viper 40 Control System: RC200-A03 Godpfjxbrrxex Acujuh Year of manufacture: 2015 Clamping Unit Clamping force: 1,800 kN Tie bar spacing (h × v): tie-barless Platen dimensions (h × v): 880 × 830 mm Minimum mould height: 300 mm Maximum opening stroke: 1,050 mm Maximum ejector stroke: 180 mm Ejector force: 80 kN Injection Unit Screw diameter: 35 mm Shot volume: 154 cm³ Maximum screw speed: 320 rpm Injection pressure: 1,595 bar (max. 2,177 bar) Injection rate: 151 cm³/s Nozzle stroke: 500 mm Dimensions and Weight Net weight (incl. control cabinet): 11.7 t Dimensions (L × W × H): 3.72 × 1.35 × 2.02 m Additional equipment ENGEL ecodrive SHV2 – servo-hydraulic drive system for low energy consumption and minimal noise levels. Quick mould change – hydraulic 4-point system, 300 × 300 mm. Core control – 3 hydraulic circuits with volume measurement, graphical pressure/speed regulation, and position monitoring (Euromap 13). Duroplast package – reinforced screw, non-return valve, open nozzle, wear- and corrosion-resistant materials, preparation for cylinder and nozzle heating (without cabling), requires a feeder (e.g., rotofeeder). Automation Robot: ENGEL Viper 40 integrated with RC200-A03 control unit. Material feeder: ROTOFEEDER BMC50 with frequency inverter and dedicated software interface. Control unit: CC200 microcomputer with 15" TFT colour touchscreen. Software features VirtMould – machine operation simulation and training Ecograph – energy consumption analysis Performance graphs Process graphs (PD-Graph I) Minicam – process assistant Batch size counter Email alarm notifications Weekly timer and data backup to USB

Sąlyga: naudotas, Gamybos metai: 2007, spaudimo jėga: 120 kN, darbinio tūrio: 154 cm³, įpurškimo slėgis: 2 177 juosta, bendras svoris: 7 300 kg, darbo valandos: 62 000 h, sraigtinio konvejerio skersmuo: 35 mm, Freight basis: ex works Delivery time: to be agreed Payment terms: 100% prior to machine takeover, net Manufacturer: Engel Type: VC Tech + ERC23/1-F Condition: from ongoing production Operating hours: approx. 62,000 CLAMPING UNIT: Clamping force: 120 t Opening stroke: 500 mm Min. mould installation height: 300 mm Max. mould installation height: - Platen dimensions (H x V): 790 x 680 mm Centre hole (nozzle/ejector plate): 125/125 mm INJECTION UNIT: SPE330 Screw diameter: 35 mm Shot weight in polystyrene: 141 g Stroke volume: 154 cm³ Injection pressure: 2,177 bar CONTROL SYSTEM: CC200 Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: 2 Air valves: yes Hot runner zones: - Robot interface: Engel integrated Other equipment: incl. ERC 23/1-F with integrated discharge conveyor (operating side opposite) +750mm, needle shut-off (hydraulic & pneumatic), interface for colour doser and temperature control unit. Godoqxympepfx Acueuh GENERAL DATA: Installed heating capacity: 9.2 kW Pump drive power: 15 kW Total connected load: Motor + heater Total weight: 7,300 kg Overall dimensions L x W x H: 4.4 x 1.4+0.8 x 2.0 m